BIS - LIMS (Laboratory Information Management System)

CIPET, Ahmedabad

Plot No. 630, Phase-IV, GIDC, Vatva,, Ahmedabad, Ahmadabad, Gujarat, 382445

7229000205 [email protected]

Scope List

Reset

37 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

6328 View breakup
-

Clause No.	Exclusion	Remark
5.1(Mass of Bale)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Ends per dm)	-	-
5.2 Table 1(Picks per dm)	-	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	-
5.2 Table 1(Drop impact strength)	-	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Dimensions)	-	-

Complete

31 Dec, 2021

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

20244 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	300
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
9.1(PIPE ENDS)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
Clause 10.7(Sulphated Ash Content)	-	950	-
10.1(Colour)	-	300	-
6.1.2(PVC Resin)	-	1100	K Value

Complete

31 Dec, 2021

-
-

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

139119 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1(Visual Appearance)	-	300		-

Complete

31 Dec, 2021

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

31469 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1 (b)(HDPE couplers —)	-	1100	-
4.1 .3(Workmanship and Appearance)	-	500	-
4.1.5(Rubber Ring)	-	1100	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300	-
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	-

Complete

31 Dec, 2021

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

8294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	1500	1000+500
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	-
8.4(Sealing rings - Hardness)	-	375	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	0	-
9.1(Visual Appearance)	-	300	-
9.2(Internal Diameter)	-	350	-
9.3(Density IS 12235 (Part 14))	-	500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	1100+300
9.5(Tensile Strength IS 12235(Part 13))	-	1600	1100+500
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-

Complete

31 Dec, 2021

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

30431 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	250	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
7.2(Length)	-	0	-
7.4 table -3 & 4(6.1 Dimensions)	-	0	-
7.4.1.2(Ovality)	-	0	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8.9 table-6(Elongation at Break)	-	1100	1100+250
8.8(Tensile Strength for Butt-fusion)	-	1100	1100+250
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	2200	-
8.4( Melt Flow Rate)	-	1100	-
8.2(Longitudinal Reversion Test)	-	700	700+250
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.6(Overall migration)	-	1700	-
8.3(Carbon black)	-	925	-
8.1(Slow Crack Growth Rate)	-	5500	5500+500

Complete

31 Dec, 2021

-
-

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

66287 View breakup
-

Clause No.	Exclusion	Remark
4.4(Colour)	-	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	-
6.4(Length of pipe)	-	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	-
8.1(Hydraulic Charactristics, Annex-A)	-	-
8.2(Reversion Test. Annex-C)	-	-
8.3(Density, Annex A of IS 7328)	-	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	-
8.7(Tensile yield strength, Annex-J)	-	-
8.7(Elongation at break, Annex-J)	-	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	-
8.8(Resistance to Weathering, Annex-F)	-	-
8.9(Squeeze off, Annex-G)	-	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	-
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	-
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	-

Complete

31 Dec, 2021

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.3 (Length of Pipe)	-	0	-
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	-
7.2(Colour )	-	300	-
7.1(Appearance:- )	-	300	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	700	700+300
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1100	1100+300
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1100	1100+300
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	1850	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-

Complete

31 Dec, 2021

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6938 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	-
4.2(Design, Shape & Dimension )	-	0	-
4.3(Workmanship, Finish & Appearance)	-	300	-
Cl. 4.4 (a)(Capacity)	-	250	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	250	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	0	-
4.6.2(TRANSPARANCY)	-	700	-
4.6.2.1, Annex-A(Transparency of container)	-	0	-
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	1000	-
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	0	-
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	0	-
4.6.4(DROP TEST)	-	1100	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	1700	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	-
4.6.5.1 (chem)(Colour migration (Caps))	-	0	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2900	-

Complete

31 Dec, 2021

-
-

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

20013 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Finish)	-	300	-
8.3(Dimensional Tolerances)	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1100	600+500
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	600	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	550	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1100	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1100	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1600	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1600	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1600	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1600	1100+500
11.10(screw withdrawal strength)	-	1600	1100+500
9.2, 11.4(Moisture content)	-	1200	700+500

Complete

31 Dec, 2021

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

10350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	1100		-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	1100		-

Complete

31 Dec, 2021

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

10688 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	300	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing ofEmitter Units)	-	400	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	-
8.5(Resistance to Tension at Elevated Temperature)	-	1100	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	-
8.8(Determination of Emitting Unit Exponent)	-	600	-

Complete

31 Dec, 2021

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

107513 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8(Visual Appearance)	-	300		-

Complete

31 Dec, 2021

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

78055 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	300	-
5.2.1(Lamination- IS 15907)	-	2000	-
5.3.1(Construction- IS 15907)	-	300	-
5.3.1(Construction- IS 15907)	-	250	-
5.3.1(The width of the hem - IS 15907)	-	250	-
5.3.1(Construction- IS 15907)	-	250	-
5.3.1(Construction- IS 15907)	-	0	-
5.3.1(Construction- IS 15907)	-	0	-
5.3.1(Construction- IS 15907)	-	0	-
5.3.2(Construction- IS 15907)	-	0	-
5.3.2(Finished width of pocket - IS 15907)	-	250	-
5.4(Bonding- IS 15907)	-	300	-
6- Table 1- SL.No (i)(Mass)	-	250	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1100	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1100	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1100	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1100	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1200	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2000	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1500	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1100	-
6.1(Length -IS 15907)	-	250	-
6.1(Width - IS 15907)	-	250	-
6.1(Height - IS 15907)	-	250	-
6.2(Water Proofness, IS 7940)	-	1000	-
6.2(Water Proofness,IS 7941)	-	1000	-

Complete

31 Dec, 2021

-
-

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250		-

Complete

31 Dec, 2021

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
4.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2021

-
-

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

17456 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Manufacture)	-	300	-
Cl 7(Finish)	-	300	-
Cl 8(Dimensions & Tolerances)	-	1000	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	700	-
Cl 10.4(For Water AbsorptionTest )	-	600	-
Cl 10.5(For Swelling in water Test )	-	300	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1100	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1100	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1100	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	2700	2200+500
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	900	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	900	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	900	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	5400	1100+4300

Complete

31 Dec, 2021

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

19780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.3.1(Bottom Seam)	-	250	-
4.3.1(The two rows of stitches shall be separated from each other)	-	300	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	500	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	300	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2021

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	300	-
4.3(Sacks)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	300	-
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	1100	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2021

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

16857 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	1100+250
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	750+250
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1350	1100+250
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	-

Complete

31 Dec, 2021

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

20605 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	300		-

Complete

31 Dec, 2021

-
-

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

50538 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(HDPE Fabric (Material Identification))	-	1050	-
3.3(Eyelets)	-	250	-
3.4( Line/ Cord beading IS 7903)	-	250	-
5.3(Joint/Seam, IS 7903)	-	250	-
5.4(Fixing of Eyelets, IS 7903)	-	250	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	1100	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	1100	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	1100	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	1100	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950	-
6.2(Length, IS 7903)	-	500	-
6.2(Width, IS 7903)	-	0	-
6.2(height, IS 7903)	-	0	-
6.3(Water Proofness,IS 7941)	-	2000	-
6.3(Water Proofness, IS 7940)	-	2000	-
6.3(Water Proofness,IS 7941)	-	0	-
6.3(Water Proofness, IS 7940)	-	0	-
5.2.1(Construction IS 7903)	-	250	-
3.1(HDPE Tapes (Material Identification))	-	1050	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	2500	-
3.1(HDPE Tapes (Carbon Black Content))	-	925	-
5.1.1(Lamination IS 7903)	-	1050	-
5.1.2(Lamination IS 7903)	-	250	-

Complete

31 Dec, 2021

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

7913 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250		-

Complete

31 Dec, 2021

-
-

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

17238 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	250		-

Complete

31 Dec, 2021

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4(Minimum Thickness)	-	250		-

Complete

31 Dec, 2021

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	250		-

Complete

31 Dec, 2021

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.3(Socket length)	-	250		-

Complete

31 Dec, 2021

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2(diameter of the socket of cap)	-	250		-

Complete

31 Dec, 2021

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
5.0 5.1 (Table1) (b)Tolerance on OD)	-	0	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	0	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	0	-
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250	-
6.1(Visual Appearance)	-	300	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-
7.2(Reversion Test)	-	1000	700+300
7.3(Tensile Test)	-	1350	1100+250
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-

Complete

31 Dec, 2021

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

3525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1(Construction and workmanship)	-	300		-

Complete

31 Dec, 2021

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Ahmedabad

Plot No. 630, Phase-IV, GIDC, Vatva,, Ahmedabad, Ahmadabad, Gujarat, 382445

7229000205 [email protected]

Scope List