BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

D-115 A, Hosiery Complex, Phase-2 Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

8588840612 [email protected]

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

7500 View breakup
Rs.7500/-[10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sizes)	-	200	10% Discount for BIS
5.1(Shell)	-	800	10% Discount for BIS
5.2(Harness)	-	0	10% Discount for BIS
5.3(Chin Strap or Nape Strap)	-	0	10% Discount for BIS
5.4(Lamp Bracket)	-	0	10% Discount for BIS
5.5(Cable Clip)	-	0	10% Discount for BIS
7.1(Mass)	-	200	10% Discount for BIS
8.1(Shock Absorption Resistance)	-	1500	10% Discount for BIS
8.2(Penetration Resistance)	-	600	10% Discount for BIS
8.3(Flamability Resistance)	-	1200	10% Discount for BIS
8.4(Electrical Resistance)	-	1200	10% Discount for BIS
8.5(Water Absorption)	-	600	10% Discount for BIS
8.6(Heat Resistance)	-	1200	10% Discount for BIS

Complete

-
0.0

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(MARKING)	-	0	-
8.8(MARKING)	-	0	-
8.9(MARKING)	-	0	-
9.1(CHECKING OF DIMENSIONS)	-	200	-
9.2(CHECKING OF DIMENSIONS)	-	0	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
11.1(PROVISIONS FOR EARTHING)	-	200	-
11.2(PROVISIONS FOR EARTHING)	-	0	-
11.3(PROVISIONS FOR EARTHING)	-	0	-
11.4(PROVISIONS FOR EARTHING)	-	0	-
11.5(PROVISIONS FOR EARTHING)	-	0	-
11.6(PROVISIONS FOR EARTHING)	-	0	-
12.1.1(TERMINALS)	-	0	-
12.1.2(TERMINALS)	-	0	-
12.2.1(TERMINALS)	-	0	-
12.2.2(TERMINALS)	-	0	-
12.2.3(TERMINALS)	-	0	-
12.2.4(TERMINALS)	-	0	-
12.2.5(TERMINALS)	-	0	-
12.2.6(TERMINALS)	-	0	-
12.2.7(TERMINALS)	-	0	-
12.2.8(TERMINALS)	-	0	-
12.2.9(TERMINALS)	-	0	-
12.3.10(TERMINALS)	-	0	-
12.2.11(TERMINALS)	-	0	-
12.3.1(TERMINALS)	-	0	-
12.3.2(TERMINALS)	-	0	-
12.3.3(TERMINALS)	-	0	-
12.3.4(TERMINALS)	-	0	-
12.3.5(TERMINALS)	-	0	-
12.3.6(TERMINALS)	-	0	-
12.3.7(TERMINALS)	-	0	-
12.3.8(TERMINALS)	-	0	-
12.3.9(TERMINALS)	-	0	-
12.3.10(TERMINALS)	-	0	-
12.3.11(TERMINALS)	-	0	-
12.3.12(TERMINALS)	-	0	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	-
6(Ratings)	-	200	-
7.1.1(Accessories Classification)	-	200	-
7.2.1(Socket-Outlets Classification)	-	200	-
7.3(Plug Classification)	-	200	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
15(INTERLOCKED SOCKET-OUTLETS)	-	200	-
16.1(RESISTANCE TO AGEING,)	-	300	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	300	-
16.3(Resistance to Humidity)	-	300	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	-
18(OPERATION OF EARTHING CONTACTS)	-	200	-
19(TEMPERATURE RISE)	-	300	-
20(BREAKING CAPACITY)	-	250	-
21(NORMAL OPERATION)	-	200	-
22.1(Verification of the Maximum Withdrawal Force)	-	200	-
22.2(Verification of Minimum Withdrawal Force)	-	200	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	400	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	400	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	600	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	400	-
21(NORMAL OPERATION)	-	0	-
29(RESISTANCE TO RUSTING)	-	550	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	300	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	250	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	250	-

Complete

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1500	-
7.0(Construction)	-	8000	-
8.0(Creepage Distance and Clearances)	-	4500	-
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-
9.0(Provision for earthing)	-	4000	-
10.0(Terminals)	-	2500	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	2500	-
14.0(Resistance to Dust & Moisture)	-	7500	-
15.0(Insulation Resistance and Electric Strength)	-	8000	-
16.0(Resistance to Heat , fire and tracking)	-	4500	-

Complete

-
-

IS 7933 (1975)

Specification for flexible polyurethane foam for domestic mattresses

9780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4.1(Dimensions - Length)	-	100	10% Discount for BIS
3.4.1(Dimensions - Width)	-	0	10% Discount for BIS
3.4.1(Dimensions - Thickness)	-	0	10% Discount for BIS
3.5(Indentation Hardness Characteristic)	-	960	10% Discount for BIS
3.6(Indentation Hardness Index)	-	960	10% Discount for BIS
3.7(Density)	-	600	10% Discount for BIS
3.8(Tensile Strength)	-	960	10% Discount for BIS
3.9(Heat Ageing)	-	2000	10% Discount for BIS
3.1(Compression Set)	-	1200	10% Discount for BIS
3.11(Durability - Loss in 25 Percent Indentation Hardness Characteristic)	-	3000	10% Discount for BIS
3.11(Durability - Reduction in Thickness)	-	0	10% Discount for BIS

Complete

-
-

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

54450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	150	10% Discount for BIS
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	600	10% Discount for BIS
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	150	10% Discount for BIS
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	150	10% Discount for BIS
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	600	10% Discount for BIS
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	600	10% Discount for BIS
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	300	10% Discount for BIS
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	300	10% Discount for BIS
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	480	10% Discount for BIS
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1200	10% Discount for BIS
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	1200	10% Discount for BIS
5.3.6(Innocuousness)	-	30000	10% Discount for BIS
5.4.1,Table 10(General)	-	150	10% Discount for BIS
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	150	10% Discount for BIS
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	600	10% Discount for BIS
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	600	10% Discount for BIS
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	600	10% Discount for BIS
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	1200	10% Discount for BIS
5.4.7(Ph Value ; ISO 20344,6.9)	-	250	10% Discount for BIS
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	1400	10% Discount for BIS
5.4.9(Chromium VI content; ISO 17075)	-	1200	10% Discount for BIS
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	600	10% Discount for BIS
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	840	10% Discount for BIS
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	1200	10% Discount for BIS
5.5.4(Ph Value ; ISO 20344,6.9)	-	250	10% Discount for BIS
5.5.5(Chromium VI content; ISO 17075)	-	1200	10% Discount for BIS
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	600	10% Discount for BIS
5.6.2(Ph Value ; ISO 20344,6.9)	-	250	10% Discount for BIS
5.6.3(Chromium VI content; ISO 17075)	-	1200	10% Discount for BIS
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	250	10% Discount for BIS
5.7.2(Ph Value ; ISO 20344,6.9)	-	250	10% Discount for BIS
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	600	10% Discount for BIS
5.7.4.1(Insole ; ISO 20344,7.3 )	-	150	10% Discount for BIS
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	150	10% Discount for BIS
5.7.5(Chromium VI content; ISO 17075)	-	1200	10% Discount for BIS
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	250	10% Discount for BIS
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	250	10% Discount for BIS
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	600	10% Discount for BIS
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	600	10% Discount for BIS
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	600	10% Discount for BIS
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	1400	10% Discount for BIS
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	600	10% Discount for BIS
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	500	10% Discount for BIS
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	500	10% Discount for BIS
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	250	10% Discount for BIS
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	600	10% Discount for BIS
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	600	10% Discount for BIS
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	600	10% Discount for BIS
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	1200	10% Discount for BIS
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	1200	10% Discount for BIS
6.2.2.3(Electrically insulating footwear; EN 50321)	-	1000	10% Discount for BIS
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	1200	10% Discount for BIS
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	600	10% Discount for BIS
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	1200	10% Discount for BIS
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	600	10% Discount for BIS
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	840	10% Discount for BIS
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	600	10% Discount for BIS
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	1400	10% Discount for BIS

Complete

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

14800 View breakup
Rs.14800/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	10% Discount for BIS
4.2 and Table 1 ii(Dimensions )	-	300	10% Discount for BIS
5.2 and Table 1 iii(Ends per dm )	-	400	10% Discount for BIS
5.2 and Table 1 iv(Picks per dm )	-	400	10% Discount for BIS
4.2 and Table 1 v(Mass of sack )	-	300	10% Discount for BIS
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1500	10% Discount for BIS
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1500	10% Discount for BIS
4.2 and Table 1 viii(Elongation at break of fabric )	-	1500	10% Discount for BIS
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10000	10% Discount for BIS
4.2 and Table 1 x(Ash content )	-	500	10% Discount for BIS

Complete

-
0.0

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

D-115 A, Hosiery Complex, Phase-2 Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

8588840612 [email protected]

Scope List