BIS - LIMS (Laboratory Information Management System)

CIPET, Vijayawada

SY NO. 377, SURAMPALLY X ROAD, GANNAVARAM MANDAL, VIJAYAWADA, VIJAYAWADA, Krishna, Andhra Pradesh, 521212

8093140230 [email protected]

Scope List

Reset

49 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

HDPE/PP, CAPACTY: 10, 15,20,25 & 30KG

17155 View breakup
Rs.17155/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	NIL
4.1(Raw Material)	-	1050	NIL
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	NIL
4.2(Tapes – Linear Density )	-	500	NIL
4.2(Construction)	-	300	NIL
4.3(Sacks)	-	300	NIL
4.3.1(Bottom Seam)	-	0	NIL
4.3.1( The two rows of stitches shall be separated from each other)	-	0	NIL
4.3.1( The outer stitch)	-	0	NIL
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	NIL
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	NIL
4.3.1(The number of stitches/dm)	-	0	NIL
4.3.2(Mouth)	-	0	NIL
4.4 and Table 1 i(Capacity)	-	250	NIL
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	NIL
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	NIL
5.2 and Table 1 iii(Ends per dm )	-	250	NIL
5.2 and Table 1 iv(Picks per dm )	-	250	NIL
5.1 and Table 1 v(Mass of sack )	-	300	NIL
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	NIL
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	NIL
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	NIL
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	INCLUDES IN BREAKING STRENGTH
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	INCLUDES IN BREAKING STRENGTH
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCLUDES UV CONDITIONING CHARGE
5.2 and Table 1 x(Ash content )	-	950	NIL

Complete

17 Jul, 2021

-
0.0

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

SIZE 25 & 50 KG

17268 View breakup
Rs.17268/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	NIL
4.1(Raw Material)	-	1050	NIL
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	NIL
4.2(Tapes – Linear Density )	-	500	NIL
4.2(Construction)	-	300	NIL
4.3(Sacks)	-	300	NIL
4.3.1(Bottom Seam)	-	250	NIL
4.3.1(The two rows of stitches shall be separated from each other)	-	0	NIL
4.3.1( The outer stitch)	-	0	NIL
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	NIL
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	NIL
4.3.1(stitches/dm)	-	0	NIL
4.3.2(Mouth)	-	0	NIL
4.4(Liner IS 10146 or IS 10910.)	-	0	NIL
4.4(Mass of the loose liner )	-	0	NIL
4.4(Width of the loose liner)	-	0	NIL
4.4(Length of the line)	-	0	NIL
4.4(Bottom seam of the loose liner)	-	0	NIL
4.4.1(Liner)	-	0	NIL
4.5 and Table 1 i(Capacity)	-	250	NIL
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	NIL
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	NIL
5.2 and Table 1 iii(Ends per dm )	-	200	NIL
5.2 and Table 1 iv(Picks per dm )	-	200	NIL
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	NIL
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	NIL
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	NIL
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	NIL
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	NIL
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	NIL
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	NIL
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCLUDES UV CONDITIONING CHARGE
5.2 and Table 1 x(Ash content )	-	950	NIL

Complete

17 Jul, 2021

-
.

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

HDPE/PP , CAPACITY 50KG

17080 View breakup
Rs.17080/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	NIL
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	NIL
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	NIL
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	NIL
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1000	NIL
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	1000	NIL
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1000	NIL
3.2(Unlaminated Fabric Mass )	-	300	NIL
3.3.1(Bottom seam (IS 10789))	-	2700	INCLUDES ALL SEAM TESTS
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	NIL
4.2 and Table 1 ii(Dimensions )	-	250	NIL
5.2 and Table 1 iii(Ends per dm )	-	200	NIL
5.2 and Table 1 iv(Picks per dm )	-	200	NIL
4.2 and Table 1 v(Mass of sack )	-	300	NIL
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	LENGTH & WIDTH WISE
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	NIL
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	INCLUDES IN BREAKING STRENGTH
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCLUDES SPECIMEN CONDITIONING CHARGES
4.2 and Table 1 x(Ash content )	-	950	NIL

Complete

17 Jul, 2021

-
.

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

HDPE OR PP

23867 View breakup
Rs.17080/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	NIL
3.2(Tapes – Width )	-	250	NIL
3.2(Tapes – Linear Density )	-	500	NIL
3.3(Tying Cord)	-	300	NIL
3.4(Sack)	-	300	NIL
3.4.1(Seam)	-	2700	INCLUDED ALL SEAM TESTS
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	NIL
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	INCLUDED IN 4.1
4.1 and Table 1 ii(Ends per dm )	-	250	NIL
4.1 and Table 1 iii(Picks per dm )	-	250	NIL
4.2 and Table 1 iv(Mass of sack )	-	500	NIL
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	NIL
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	NIL
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	2200	INCLUDES TOP & BOTTOM SEAM
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	INCLUDES IN 4.1
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	INCLUDES IN 4.1
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCLUDES WEATHERING CHARGES OF RS 10180
4.1 and Table 1 ix(Ash content )	-	950	NIL

Complete

17 Jul, 2021

-
0.0

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

SIZE 40-200 CLASS 1,2,3 & 4

35488 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	Test charges
6.2, 6.2.1 (Quick Coupled Fittings)	-	1000	Test charges
6.1.3.2 (Quick coupled fittings)	-	1000	Test charges
6.1.3.1.1(Weldability Test)	-	1500	Test charges
6.1.3, 6.1.3.1(Weldability Test)	-	1500	Test charges
6.1.2.2( Hydraulic Proof Test)	-	1500	Test charges
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	1500	Test charges
6.1.1, 6.1.1.1(Leakage Test)	-	1500	Test charges
6.1.1, 6.1.1.1(Leakage Test)	-	1500	Test charges
6.1(Quick Coupled Pipes and Fittings)	-	1500	Test charges
4.1.5(Rubber Ring)	-	375	Test charges
4.1.4(b)(Holding Attachments for Coupler Parts)	-	2500	Test charges
4.1 .3(Workmanship and Appearance)	-	300	Test charges
4.1 .1.2.2(HDPE couplers)	-	1500	Test charges
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1000	Test charges

Complete

17 Jul, 2021

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

SIZE 40-200 MM CLASS 1,2,3 & 4

14519 View breakup
Rs.14519/- , Rs.3044/- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	NIL
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	NIL
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	NIL
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	NIL
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	NIL
4.3(Anti-oxidant)	-	0	NIL
5.1 table -1(DIMENSIONS OF PIPES)	-	500	NIL
5.1.2(Ovality)	-	0	CHARGES INCLUDED IN DIMENSION
6.1(VISUAL APPEARANCE)	-	300	NIL
7.1 Table -2(Hydraulic Characteristics)	-	6400	INCLUDES ACCEPTANCE AND TYPE TEST
7.2(Reversion Test)	-	1000	INCLUDES SPECIMEN CHARGE
7.3(Tensile Test)	-	1350	INCLUDES SPECIMEN CHARGE
7.4table-2(Fusion Compatibility Test)	-	6400	INCLUDES ACCEPTANCE AND TYPE TEST
7.5(Density)	-	500	NIL
7.6(Melt now Rate (MFR))	-	1100	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

UPTO 315MM, TYPE -A & B, PLAIN & GROOVED SOCKET

12725 View breakup
Rs.12400/- for type A, Rs.12725/- for Type B, Rs.825/- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	NIL
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	NIL
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	NIL
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	INCLUDED IN 7.1
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	INCLUDED IN 7.1
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	INCLUDED IN 7.1
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	INCLUDED IN 7.1
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	INCLUDED IN 7.1
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	NIL
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	INCLUDES SPECIMEN CHARGE
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	NIL
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	11100	NIL
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	4850	INCLUDES EXPOSURE TO SUNLIGHT
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	INCLUDES SPECIMEN CHARGE
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	INCLUDES SPECIMEN CHARGE
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350	INCLUDES SPECIMEN CHARGE
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	NIL
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	NIL
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

SIZE 12-25 MM, CLASS 1,2,3 & 4

12075 View breakup
Rs.9056/-, Rs.5106/- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	NIL
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	NIL
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	NIL
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500	NIL
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	NIL
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	NIL
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	NIL
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	NIL
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	NIL
6.2.2(Fittings)	-	0	NIL
6.3(General)	-	300	NIL
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	NIL
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	CHARGE INCLUDED IN 8.1.2
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	NIL
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	NIL
8.2.2(Regulated Emitting Pipes)	-	0	NIL
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	NIL
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	INCLUDED IN 8.3.1
8.3.3(Flow Paths in Emitting Unit)	-	400	NIL
8.3.4(Spacing ofEmitter Units)	-	0	INCLUDED IN 8.3.3
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	NIL
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	NIL
8.5(Resistance to Tension at Elevated Temperature)	-	1100	NIL
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	NIL
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	NIL
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	NIL
8.8(Determination of Emitting Unit Exponent)	-	600	NIL
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	NIL
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

4700 View breakup
Rs.3525/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	NIL
7.2(Flow path in emitters)	-	300	NIL
7.3.1(Resistance to Hydrostatic pressure)	-	1000	NIL
7.3.2(Resistance to Hydrostatic pressure)	-	0	CHARGES INCLUDES IN 7.3.1
7.3.3(Resistance to Hydrostatic pressure)	-	0	CHARGES INCLUDES IN 7.3.1
7.4.1(Emitter Pull Out In-line emitters)	-	500	NIL
7.4.2(Emitter Pull Out On-line emitters)	-	0	CHARGES INCLUDES IN 7.4.1
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	NIL
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	CHARGES INCLUDES IN 8.1.2
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	0	CHARGES INCLUDES IN 8.1.2
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	CHARGES INCLUDES IN 8.1.2
8.3(Determination of Emitter Exponent)	-	600	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

SIZE 35MM - 400 MM

7794 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	NIL
9.5(Tensile Strength IS 12235(Part 13))	-	1600	INCLUDES SPECIMEN CHARGE
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	INCLUDES SPECIMEN CHARGE
9.3(Density IS 12235 (Part 14))	-	500	NIL
9.1( Visual Appearance)	-	300	NIL
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	NIL
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	250	NIL
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	NIL
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	NIL
9.2(Internal Diameter)	-	350	NIL
8.4(Sealing rings - Hardness)	-	375	NIL
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	NIL
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	0	INCLUDED IN 8.1&8.3
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	1000	NIL
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.3.2(Rib height)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.3.1(No.of Ribs)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	INCLUDED IN SEGMENTAL LENGTH L5
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1000	NIL
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	INCLUDED IN DIMENSION 7.2
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0	INCLUDED IN DIMENSION 7.2
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	INCLUDED IN DIMENSION 7.2
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	INCLUDED IN DIMENSION 7.2
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	INCLUDED IN DIMENSION 7.2
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	950	NIL
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	700	NIL
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	NIL
5(COLOUR)	-	250	NIL

Complete

17 Jul, 2021

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

SIZE 12 MM, 16 MM, 20 MM, 25MM, 32MM. CLASS 1,2, & 3

9175 View breakup
Rs.7431/-, Rs.5081/- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c.i (Density)	-	500	FOR RAW MATERIAL
4.1.c.ii (Toluene extract - Annex A)	-	1000	FOR RAW MATERIAL
4.1.c.iii (Volatile matter - Annex B )	-	700	FOR RAW MATERIAL
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	NIL
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	NIL
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	NIL
7.3(Tensile Test)	-	1100	NIL
7.3(Elongation at Break)	-	0	CHARGES INCLUDED IN TENSILE
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

CAPACITY 200-20000L

16800 View breakup
Rs.13850/- for above 1500 ltrs, Rs.13175/- for up to 1500 ltrs, Rs.3044/- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	NIL
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050	INCLUDES ALL DIMENSIONAL CHARGES
4.2.3(Carbon Dispersion Test)	-	700	NIL
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	3050	INCLUDES ALL DIMENSIONAL CHARGES
6.1(Finish)	-	300	NIL
7.1.1(Resistance to Deformation)	-	700	NIL
7.1.2(Resistance to Deformation)	-	700	NIL
7.2(Resistance to Impact)	-	1100	NIL
7.4(Tensile Strength)	-	1350	INCLUDES SPECIMEN CHARGE
7.5(Flexural Modulus)	-	1600	INCLUDES SPECIMEN CHARGE
7.6(overall Migration)	-	2200	INCLUDES SPECIMEN CHARGE

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

SIZE 20MM TO 630MM, CLASS 1-6

1925 View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	NIL
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	950	NIL
3.2.1, Table-1, Fig-1(B)	-	500	NIL
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	CHARGES INCLUDED IN DIMENSION
Clause 3.2.2, and Fig. 2.(B)	-	0	CHARGES INCLUDED IN DIMENSION
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	CHARGES INCLUDED IN DIMENSION

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

SIZE 20 TO 630MM

1925 View breakup
Rs.1444/-, Rs.3075/- for PVC Resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	3000	FOR PVC RESIN (OPTIONAL)
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	NIL
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	CHARGES INCLUDED IN DIMENSION
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	CHARGES INCLUDED IN DIMENSION
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	CHARGES INCLUDED IN DIMENSION
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	NIL
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	NIL
8(Marking)	-	0	NIL

Complete

17 Jul, 2021

-
0.0

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

SIZE 16-315 MM

5625 View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

SIZE 16-315MM

5625 View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	CHARGES INCLUDED IN THICKNESS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	CHARGES INCLUDED IN THICKNESS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	CHARGES INCLUDED IN THICKNESS
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	NIL
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	NIL
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	CHARGES INCLUDED IN LEAD 1ST EXTRACTION
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	NIL

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

NATURAL & BLACK COMPOUNDED , TYPE 1 TO 4

14181 View breakup
For Others: Rs.15000/- For BIS: Rs.12675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	NIL
5.1.2(Film Form)	-	300	NIL
5.1.3(Odour)	-	300	NIL
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	NIL
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	NIL
5.1.6a(Carbon Black Content, Annex-A)	-	925	NIL
5.1.6b(Ash Content, Annex-A)	-	950	NIL
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	NIL
5.2.2(Tolerance on Thickness, Annex-A)	-	500	CHARGE FOR DIMENSION
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1100	NIL
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	NIL
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	NIL
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	NIL
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	750	NIL
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	NIL
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1100	NIL
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	NIL
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	NIL
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	NIL
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	NIL
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	NIL
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
8.1, Table 3(Tear resistance , Annex B)	-	750	NIL
8.1, Table 3(Puncture resistance , Annex C)	-	1100	NIL
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	NIL
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	NIL
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	CHARGES INCLUDED IN TENSILE STRENGTH
9.1, Table 4(Tear resistance , Annex B)	-	1000	NIL
9.1, Table 4(Puncture resistance , Annex C)	-	1100	NIL

Complete

17 Jul, 2021

-
Included w.e.f. 02.08.2018. Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

SIZE: 20MM TO 630MM, CLASS: 1 TO 6

20244 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	FOR ELASTOMERIC SEALING RING SOCKETS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	FOR ELASTOMERIC SEALING RING SOCKETS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	FOR ELASTOMERIC SEALING RING SOCKETS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	FOR ELASTOMERIC SEALING RING SOCKETS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	FOR ELASTOMERIC SEALING RING SOCKETS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	FOR ELASTOMERIC SEALING RING SOCKETS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	FOR ELASTOMERIC SEALING RING SOCKETS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	FOR ELASTOMERIC SEALING RING SOCKETS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	FOR ELASTOMERIC SEALING RING SOCKETS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	FOR ELASTOMERIC SEALING RING SOCKETS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	FOR ELASTOMERIC SEALING RING SOCKETS
9.1(PIPE ENDS)	-	30	FOR ELASTOMERIC SEALING RING SOCKETS CHARGE IS INCLUDED IN VISUAL APPEARANCE
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	FOR ELASTOMERIC SEALING RING SOCKETS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	FOR ELASTOMERIC SEALING RING SOCKETS RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS
Clause 10.7(Sulphated Ash Content)	-	950	FOR ELASTOMERIC SEALING RING SOCKETS
11.2(Resistance to External Blows at 0°C)	-	1100	Resistance to External Blows at 0°C
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1000	MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1000	MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Vicat Softening Temperature
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1400	Reversion Test
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	375	Opacity
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Visual Appearance
9.1(PIPE ENDS)	-	300	PIPE ENDS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	Minimum depth of engagement
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	Minimum Length
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	Diameter at mid point of the socket length (Minimum)
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	PIPE-Thickness(Minimum)
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-PIPE-Thickness(Maximum)
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	Ovality (Maximum)
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	O.D. at any Point (Minimum)
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	O.D. at any Point (Maximum)
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Mean O.D. (Minimum)
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	Mean O.D. (Mamimum)
10.7(Sulphated Ash Content)	-	1100	Sulphated Ash Content
10.1(Colour)	-	300	Colour
6.1.2(PVC Resin)	-	1100	-

Complete

17 Jul, 2021

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

SDR 41 to 6, DN 16 to 1200 mm, PE 63/80/100, PN 2 to20

41625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	6000	INCLUDES SPECIMEN CHARGE
8.9 table-6(Elongation at Break)	-	1600	INCLUDES SPECIMEN CHARGE
8.8(Tensile Strength for Butt-fusion)	-	1600	INCLUDES SPECIMEN CHARGE
8.7(Density)	-	500	NIL
8.5 (Oxidation Induction Time)	-	2200	NIL
8.4( Melt Flow Rate)	-	1100	NIL
8.2(Longitudinal Reversion Test)	-	900	INCLUDES SPECIMEN CHARGE
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	NIL
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	INCLUDES ALL TESTS
7.4.1.2(Ovality)	-	0	INCLUDES IN DIMENSION
7.4 table -3 & 4(6.1 Dimensions)	-	500	INCLUDES ALL DIMENSIONAL MEASUREMENTS
7.2(Length)	-	0	INCLUDES IN DIMENSION
6.2.1(6.1.1 Identification Stripes)	-	250	NIL
8.6(Overall migration)	-	2000	INCLUDES SPECIMEN CHARGES
8.3(Carbon black)	-	1625	INCLUDES CARBON BLACK DISPERSION TEST
5.3(e)(Carbon Black Master Batch)	-	5100	INCLUDES ALL TEST FOR CARBON BLACK POWDER
5.3(d)(Carbon Black Master Batch)	-	950	NIL
5.3(c)(Carbon Black Master Batch)	-	925	NIL
5.2(Polyethylene Resin)	-	5200	INCLUDES ALL TEST CHARGES FOR RAW MATERIAL

Complete

17 Jul, 2021

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Vijayawada

SY NO. 377, SURAMPALLY X ROAD, GANNAVARAM MANDAL, VIJAYAWADA, VIJAYAWADA, Krishna, Andhra Pradesh, 521212

8093140230 [email protected]

Scope List