BIS - LIMS (Laboratory Information Management System)

CIPET, Vijayawada

SY NO. 377, SURAMPALLY X ROAD, GANNAVARAM MANDAL, VIJAYAWADA, VIJAYAWADA, Krishna, Andhra Pradesh, 521212

8093140230 [email protected]

Scope List

Reset

49 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

20 to 630 mm

37025 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.4, annexure-E( Orientation Factor)	-	1000	-
5.5( Density, g/cc)	-	500	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	1000	-
7.3( Opacity)	-	500	-
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
8.2 table-9( Pipe Ends)	-	300	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	500	-
8.1.3 (Length, meter)	-	500	-
8.2 table-9(Dimensions of Integral Socket)	-	500	-
9.3 table-12( Ring Stiffness)	-	1100	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1000	-
12(b)( ELASTOMERIC SEALS)	-	375	-

Complete

17 Jul, 2021

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

20 to 630 mm, Class 1 to 6

15856 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.2(Resistance to External Blows at 0°C)	-	1000		-

Complete

17 Jul, 2021

-
-

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40 to 200 diameter, class 1 to 4

37244 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.6(Melt now Rate (MFR))	-	1100	-
5(Dimensions of pipe - i) Outside diameter)	-	500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics - Quality test)	-	4800	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test- i) Tensile Strength)	-	1100	-
7.3(Tensile Test - ii)Elongation at Break)	-	1100	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	500	-
5.1.2(Ovality)	-	300	-
4.1.4(Holding attachments for coupler parts)	-	1000	-
4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	-
4.1.5(Rubber rings- B) Change in hardness)	-	375	-
4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300	-
6.1.3(Weldability Test- a) Quality test)	-	4800	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-

Complete

17 Jul, 2021

-
-

IS 10889 (2004)

High density polyethylene films (First Revision)

- View breakup
Rs.5756/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

- View breakup
Rs 6825 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1444/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

- View breakup
Rs.45613/- (with Elastometric sealing ring), Rs.45713/- (With solvent cement)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

- View breakup
Rs.20605/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

- View breakup
Rs.7913/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
.

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

- View breakup
Rs.4219/-,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 12100 (1987)

Specification for high density polyethylene (HDPE) woven sacks for packing flour

- View breakup
Rs.9000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

UPTO 1200MM

80550 View breakup
Rs.80550/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jul, 2021

-
Up to and including 600 mm. Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021.

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

UPTO 50MM

16069 View breakup
Product - Rs 16069 /- Raw Material Rs 3044 /- Aluminium – Rs 1263 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250	NIL
10.1(Density )	-	500	NIL
10.6(Apparent tensile strength of pipe)	-	1600	INCLUDES SPECIMEN CHARGE
10.7(minimum burst pressure)	-	1000	NIL
Clause 10.3 table 3(Carbon black content)	-	925	NIL
table 3(anti oxidant content)	-	0	NIL

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

63-630MM, STIFFNESS 2,4,8KN/M2

15000 View breakup
Product - Rs 15000 /- Raw Material Rs 900 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	NIL
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	NIL
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	NIL
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	NIL
6.1.3 (Length of Pipe)	-	0	NIL
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	NIL
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	NIL
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	NIL
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	NIL
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	NIL
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	NIL
6.1.4.1 (e3min=0.75e)	-	0	NIL
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	NIL
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	NIL
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	NIL
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	NIL
7(Physical characteristics )	-	0	NIL
7.1(Appearance:- )	-	300	NIL
7.2(Colour )	-	300	NIL
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	NIL
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	INCLUDES SPECIMEN CHARGE
8(MECHANICAL CHARACTERISTICS)	-	0	NIL
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	INCLUDES SPECIMEN CHARGE
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	INCLUDES SPECIMEN CHARGE
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	NIL
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	NIL
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	0	NIL
9.2 IS 14182(b) Solvent cement)	-	0	NIL
10(Performance requirements)	-	0	NIL
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	NIL
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	NIL
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	NIL
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	NIL

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

SIZE 16-630, GRADE PE 80 &100, SDR 17.6,13.6,11,9

45125 View breakup
Rs 45125 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300	NIL
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500	NIL
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	NIL
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200	NIL
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250	INCLUDES CONDITIONING
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	NIL
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	0	NIL
5.3(U.V.Stabilizer)	-	0	NIL
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	NIL
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	0	INCLUDED IN 6.1
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	0	INCLUDED IN 6.1
6.4(Length of pipe)	-	0	INCLUDED IN 6.1
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0	INCLUDED IN 6.1
8.1(Hydraulic Charactristics, Annex-A)	-	20300	INCLUDES SPECIMEN CHARGE
8.2(Reversion Test. Annex-C)	-	700	NIL
8.3(Density, Annex A of IS 7328)	-	500	NIL
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	NIL
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200	NIL
8.7(Tensile yield strength, Annex-J)	-	1350	NIL
8.7(Elongation at break, Annex-J)	-	1350	NIL
8.8(Resistance to Weathering, Annex-F)	-	12550	NIL
8.9(Squeeze off, Annex-G)	-	6100	NIL
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	NIL
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2200	NIL

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UPTO 160MM

7438 View breakup
Product - Rs 7438 /- Material Rs 1725 /- Rubber Ring – Rs 1069 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	0	NIL
3(Type of Fitting)	-	0	NIL
4(Size Designation)	-	0	NIL
5(Colour of fittings)	-	300	NIL
7.1,Table 1(Wall thickness)	-	500	NIL
7.2 ,Table 2&3(Socket Dimensions)	-	0	INCLUDED IN 7.1
7.3(Dimensions of waste trap(Nahani Trap)	-	0	NIL
8(Sealing Rings)	-	1425	NIL
10(Workmanship)	-	300	NIL
11(Design requirements)	-	0	NIL
11.1(Solvent cement type or Rubber ring type)	-	0	NIL
11.2(Socket and spigot configeration)	-	0	NIL
11.4,Table 5(Vent cowl)	-	0	NIL
11.5,Table 6(Pipe Clips)	-	0	NIL
12(Physical test requirements)	-	0	NIL
12.1(Visual appearance)	-	300	NIL
12.2(Stress relief test)	-	700	NIL
12.3(Vicat softening tempewrature)	-	1100	NIL
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	INCLUDES CONDITIONING CHARGE
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	NIL
Cl.15, Annex B(Sulphated Ash Content)	-	850	NIL
16(Mechanical Properties)	-	0	NIL
16.1(Impact test)	-	1000	NIL
17(Watet tightness of joint)	-	1000	NIL

Complete

17 Jul, 2021

-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

SIZE 63-1000MM , GRADE PE 63, 80, 100 .PN 2.5, 4, 6, 10

8681 View breakup
Rs.8681/- , Rs.3044/- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	NIL
3(Designation)	-	0	NIL
4(Colour)	-	300	NIL
6(Dimensions of pipes)	-	250	NIL
7(Visual Appearance)	-	300	NIL
8.1(Hydraulic characteristics)	-	6400	NIL
8.2(Reversion)	-	1000	NIL
8.3(Density)	-	500	NIL
8.4(Melt Flow Rate)	-	1100	NIL
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	NIL
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	NIL

Complete

17 Jul, 2021

-
0.0

Bureau of Indian Standards

The National Standards Body of India

CIPET, Vijayawada

SY NO. 377, SURAMPALLY X ROAD, GANNAVARAM MANDAL, VIJAYAWADA, VIJAYAWADA, Krishna, Andhra Pradesh, 521212

8093140230 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found