BIS - LIMS (Laboratory Information Management System)

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 [email protected]

Scope List

Reset

38 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

All

191425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	2925	-
3.2(HDPE Fabric)	-	250	-
5.1(Lamination)	-	250	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	-
5.2(Panel Width)	-	250	-
5.3(Joints/Seams)	-	200	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	-
5.1.1 and 6.2(Mass, g/sq m)	-	250	-
5.1.1 and 6.2(Length)	-	250	-
5.1.1 and 6.2(Width)	-	0	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1100	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	1100	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	176500	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1100	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1100	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1100	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1100	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1100	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1000	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1000	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950	-

Complete

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

All

53773.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	250	-
Cl. 6.2(Substance)	-	250	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	6400	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	2200	-
Cl. 6.4(water proofness test)	-	1000	-
Cl. 6.5(Strenght of joints/seams)	-	1100	-
Cl 6.6(Flex Test)	-	15400	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	2200	-
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	250	-

Complete

-
-

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

All

52787.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes (Material Identification))	-	1050	-
3.1(HDPE Tapes (Carbon Black Content))	-	925	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	2500	-
3.2(HDPE Fabric (Material Identification))	-	1050	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	250	-
3.4( Line/ Cord beading IS 7903)	-	250	-
5.1.1(Lamination IS 7903)	-	1050	-
5.3(Joint/Seam, IS 7903)	-	400	-
5.4(Fixing of Eyelets, IS 7903)	-	250	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	250	No. of HDPE fabric No. of lamination layers Total no. of layers
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	250	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	250	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	2700	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	2700	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950	-
6.2(dimension(l))	-	250	a) Length b) Width c) Height
6.2(dimension(w))	-	0	-
6.2(dimension(h))	-	0	-
6.3(Water Proofness,IS 7941)	-	1000	Before Ageing
6.3(Water Proofness, IS 7940)	-	1000	After Ageing

Complete

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	200	-
4.3(Sacks)	-	500	-
4.7(Valve for Filling of Sacks)	-	250	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	250	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	300	-
4.2 (Fabric)	-	250	-
4.1(Raw Material )	-	1050	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	-

Complete

-
-

IS/ISO/TR 15801 (2017)

Document Management ” Electronically Stored Information ” Recommendations for Trustworthiness and Reliability

- View breakup
FOR OTHERS: Rs. 115775/- + GST for PP random co polymer pipes for hot and cold water supplies. Rs. 4900/- + GST for Raw Material. FOR BIS: Rs. 107513/- + GST for PP random co polymer pipes for hot and cold water supplies. Rs. 3831/- + GST for Raw Material.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

- View breakup
FOR OTHERS: Rs. 16700/- + UV exposure charges extra as per Type/Grade of Film.+ GSTK, FOR BIS: Rs. 13088/- + UV exposure charges extra as per Type/Grade of Film. + GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type I and II (Natural film)

13956.25 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1350	-
8.1, Table 3(Puncture resistance , Annex C)	-	1000	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	0	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 [email protected]

Scope List

No Record Found

No Record Found

No Record Found