BIS - LIMS (Laboratory Information Management System)

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 [email protected]

Scope List

Reset

38 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	1925	HYDRAULIC-RS. 850 + OPACITY-RS. 575+DIMENSION 500
3.2.1, Table-1, Fig-1(B)	-	0	-
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	-
3.2.1, Table-1, Fig-1(Nominal size)	-	0	-
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	-
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	-

Complete

-
-

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

10762 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 3.1(Requirements)	-	4300	Identification- Rs. 2000 Colour -Rs. 300 Presence of UV stablizer-2000
3.2(Material)	-	1600	Density-Rs. 500 MFI-Rs. 1100
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	-

Complete

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

3525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	-
7.2(Flow path in emitters)	-	300	-
7.3.1(Resistance to Hydrostatic pressure)	-	1000	-
7.4.1(Emitter Pull Out In-line emitters)	-	500	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	-
8.3(Determination of Emitter Exponent)	-	600	-

Complete

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material)	-	1050	-
6.1.1(Description)	-	300	-
6.1.4(Odour)	-	500	-
6.1.6(Width)	-	250	-
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1700	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	1000	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	1000	-
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	850	-
Cl. 7.1(Vibration Leakage Test)	-	1000	-
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2900	-
7.2 Annex F(Stack Load test)	-	900	-
7.3 Annex G(Drop test )	-	1100	-
7.4 Annex H(Ink adhesion test for printed pouches)	-	500	-

Complete

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17417.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5 and Table 1 i(Capacity)	-	250	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.1(Raw Material)	-	1050	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	2200	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.3(Sacks)	-	300	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

17905 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.3.1(Bottom seam (IS 10789))	-	200	-
3.3.1(Bottom seam (IS 10789))	-	0	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	-
4.2 and Table 1 x(Ash content )	-	950	-

Complete

-
-

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

356175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	-
8.1(Hydraulic Charactristics, Annex-A)	-	25100	-
8.2(Reversion Test. Annex-C)	-	700	-
8.3(Density, Annex A of IS 7328)	-	500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	-
8.7(Tensile yield strength, Annex-J)	-	1350	-
8.8(Resistance to Weathering, Annex-F)	-	9000	-
8.7(Elongation at break, Annex-J)	-	1350	-
8.9(Squeeze off, Annex-G)	-	1300	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	5000	-

Complete

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

7425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	300	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	300	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10(Resistance to Heat -Ball presure test)	-	700	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1400	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1400	-

Complete

-
-

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

5625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2, 8(Wall Thickness)	-	500	-
7.3(Length)	-	0	-
7.4.1,Table 2(Perforation Requirement-(Refer Table 2))	-	500	-
8.1.2(Visual Appearance, Workmanship and Finish)	-	300	-
8.2(Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-	500	-
8.3,Table 3(Pipe stiffness-(Refer Annex A))	-	1100	-
8.4,Table 3(Impact Strength at 0 degree C- (refer Annex B))	-	1400	-
8.5(Elongation Test-(Annex C,)- pipes shall not elongate more than 7.5 percent)	-	1100	-
8.6(BendIng Test-(Annex D,))	-	1000	-
8.7(Joints)	-	1000	-

Complete

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4218.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2(diameter of the socket of cap)	-	500		-

Complete

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4218.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
table 1 sl.no: 01(16 )	-	500		-

Complete

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4218.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	500		-

Complete

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

14100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	included in dimension test
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	included in dimension test
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	included in dimension test
6.1.3 (Length of Pipe)	-	0	included in dimension test
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	included in dimension test
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	included in dimension test
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	included in dimension test
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	included in dimension test
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	included in dimension test
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	included in dimension test
6.1.4.1 (e3min=0.75e)	-	0	included in dimension test
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	included in dimension test
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	included in dimension test
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	included in dimension test
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	included in dimension test
7.1(Appearance:- )	-	300	Nil
7.2(Colour )	-	300	Nil
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	Test Charges-700 + Specimen charge-300
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	Test Charges-1100 + Specimen charge-300
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	Test Charges-1100 + Specimen charge-300
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	Nil
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	Nil
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	-

Complete

-
-

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,Table 1(Length )	-	250	charges of Length + width is Rs. 250
5,Table 1(Width )	-	0	Nil
5,Table 1(Thickness)	-	250	Nil
5,Table 1(Specific Gravity )	-	500	Nil
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1100	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1100	Tensile Strength & elongation at break=1100
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0	-
5,Table 1(Tear resistance (machine direction))	-	1100	-
5,Table 1(Tear resistance (Cross direction))	-	1100	-
5,Table 1(Index puncture resistance,N)	-	1100	-
5,Table 1(Low temperature crack resistance)	-	1500	Testing charge- 1000 + specimen charge-500
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	1000	-
5,Table 1(Seam strength,kg,Min)	-	1100	-
5,Table 1(Volatile Loss ,% ,Max)	-	700	-
5,Table 1(Peel strength,kN/m,Min)	-	1100	-
5,Table 1(Resistance to soil burial)	-	0	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	6600	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	0	-
5,Table 1(Tensile strength (Transverse),% change)	-	0	-
5,Table 1(Elongation at break (Transverse),% change)	-	0	-
5,Table 1(Water extraction,% loss in weight)	-	600	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	27250	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	1100	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	250	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	0	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	1050	charge for identification clause 3.0
5, Table-2(Horizontal rate of burning)	-	1500	-
5, Table-2(Vertical rate of burning)	-	0	-
6.0(Dimensions and tolerances)	-	500	-
5, Table-2(Length)	-	250	-
5, Table-2(Width)	-	0	-
5, Table-2(Thickness at 20kPa pressure)	-	250	-
5, Table-2(Tensile Strength (Longitudinal))	-	1100	-
5, Table-2(Tensile Strength (Transverse))	-	1100	-
5, Table-2(Behaviour during perforation)	-	1100	-
5, Table-2(Tear Strength (Machine direction))	-	1100	-
5, Table-2(Tear Strength (Cross direction))	-	1100	-
5, Table-2(Height of fall without perforation)	-	1100	-
5, Table-2(Cold crack resistance at low temperature)	-	1500	1000+500 (Test charge = Specimen charge)
5, Table-2(Hydrostatic Pressure Resistance)	-	1000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	1250	-
5, Table-2(Resistance to acid and alkali)	-	34100	3300 + 30800 (Test charge + Specimen charge)
5, Table-2(Change in length after heating)	-	550	-
5, Table-2(Change in width after heating)	-	0	-
5, Table-2(Resistance to static puncturing)	-	1100	-

Complete

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	250	-
6.1(Visual Appearance)	-	300	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1350	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-

Complete

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

8681.25 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	300	Colour
6(Dimensions of pipes)	-	250	Dimensions of Pipes
7(Visual Appearance)	-	300	Visual Appearance
8.1(Hydraulic characteristics)	-	6400	a) Acceptance Test b) Type Test
8.2(Reversion)	-	1000	Reversion Test
8.3(Density)	-	500	Density
8.4(Melt Flow Rate)	-	1100	Melt Flow Rate
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Carbon Black Content
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Carbon Black Dispersion

Complete

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	Identification
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	Fabric
4.3(Sacks)	-	300	Visual Appearance
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	Breaking Strength - Lengthwise & Breadthwise
5.2 and Table 1 x(Ash content )	-	950	-

Complete

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

54960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	Diameter of Cord Beading
5.2.1(Lamination- IS 15907)	-	250	Lamination
5.3.1(Construction- IS 15907)	-	300	-
6.1(Width - IS 15907)	-	250	-
5.3.2(Construction- IS 15907)	-	300	-
5.4(Bonding- IS 15907)	-	250	-
6- Table 1- SL.No (i)(Mass)	-	250	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	2450	a) Warp direction b) Weft direction
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1350	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1350	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1450	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2250	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	19000	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350	-
6.1(Length -IS 15907)	-	250	-
6.1(Height - IS 15907)	-	250	-
6.2(Water Proofness,IS 7941)	-	6450	a) Before Ageing b) After Ageing c) Ageing 70 C/168 hrs.
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	-

Complete

-
-

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

15900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	1350	-
4.2.1(Construction and workmanship)	-	300	-
4.2.2(Construction and workmanship)	-	300	-
4.2.3(Construction and workmanship)	-	300	-
4.3(Threaded connections ISO 7-1.)	-	400	-
4.4.1(Effective pressures)	-	400	-
4.4.2(Actuating mechanism)	-	400	-
6.1(Test of construction and parts)	-	300	-
6.2.1(Threaded connections to riser)	-	400	-
6.2.2(Nozzle threads intended for threaded connection)	-	400	-
6.3(Test of resistance to hydrostatic pressure at ambient temperature)	-	850	-
6.4(Test of resistance to hydrostatic pressure at high temperature)	-	1600	-
6.5.1 a(Watertightness of sprinkler - flowrate < 250 Iih)	-	400	-
6.5.1 b(Watertightness of sprinkler - flowrate ≥ 250 I/h,)	-	400	-
6.5.2(Watertightness of nozzle connection)	-	400	-
7.1(Test of uniformity of rotation speed)	-	400	-
7.2(Test of uniformity of ftowrate )	-	400	-
7.3(Test of distribution characteristics)	-	1500	-
7.4(Test of effective diameter of coverage)	-	400	-
7.5(Test of trajectory height (for sprinklers with low trajectory angle))	-	400	-
7.6(Test of range of effective pressure)	-	400	-
8.1 and 6.1(Durability tests)	-	6250	-
8.2 and 6.3(Durability tests)	-	850	-
8.3 and 6.5.1(Durability tests)	-	400	-

Complete

-
-

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

1443.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	-
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	-
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	-

Complete

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

14162.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
6.3(General)	-	1050	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing ofEmitter Units)	-	400	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1100	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1100	-
8.5(Resistance to Tension at Elevated Temperature)	-	1100	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1800	-
8.8(Determination of Emitting Unit Exponent)	-	600	-

Complete

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

30231.25 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	-
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-

Complete

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

14518.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	700	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
6.1(VISUAL APPEARANCE)	-	300	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	4800	-
7.2(Reversion Test)	-	1000	-
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1350	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	0	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1100	-

Complete

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

16-315mm

4218.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	-
Cl. 6.2(Opacity- Appendix B)	-	575	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-

Complete

-
-

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

16-50mm

7275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	300	-
10(Resistance to Heat -IS:3419)	-	700	-
11(Resistance to Burning - IS 3419)	-	700	-
12(Moisture Absorption - IS 3419)	-	700	-
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1100	-
14.1(Copper Test - IS 3419)	-	700	-
15, 15.3(Resistance to Oil - IS 3419)	-	200	-
16- Appendix-A(Resistance to Impact -IS 3419)	-	1000	-
17.2(Electric Strength - IS 3419)	-	1100	-
17.3(Insulation Resistance - IS 3419)	-	1100	-
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1100	-

Complete

-
-

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

All

8156.25 View breakup
FOR OTHERS: Rs. 10875/- + GST, FOR BIS: Rs. 8156/- + GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sizes)	-	250	Dimension
6.1(Workmanship & Finish)	-	300	-
7.1(Mass)	-	250	Mass of Helmet
8.1(Shock Absorption Resistance)	-	2000	-
8.2(Penetration Resistance)	-	1000	-
8.3(Flamability Resistance)	-	750	-
8.4(Electrical Resistance)	-	1100	-
8.5(Water Absorption)	-	600	-
8.6(Heat Resistance)	-	700	-
3.1(Shell)	-	1000	-
3.2(Harness)	-	375	-
3.3(Metal Parts)	-	1000	-

Complete

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

20318.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
10.1(Surface Finish)	-	300	Visual Appearance
10.1(Colour)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
Clause 10.7(Sulphated Ash Content)	-	950	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.2(Resistance to External Blows at 0°C)	-	1100	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-

Complete

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

All

7837.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	-
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	300	-
4.4 (chem)(Brimful capacity)	-	250	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	250	-
4.5 (chem)((b) Wall Thickness, mm Middle)	-	0	-
4.5 (chem)(a) Wall Thickness, mm Top)	-	0	-
4.6.2(TRANSPARANCY)	-	700	-
4.6.3(LEAKAGE TEST)	-	1000	-
4.6.4(DROP TEST)	-	1100	-
4.6.5(MIGRATION TEST)	-	1700	-
4.6.6(PORTABILITY TEST)	-	2900	-

Complete

-
-

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

All

16068.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250	-
10.1(Density )	-	500	-
10.6(Apparent tensile strength of pipe)	-	1600	-
10.7(minimum burst pressure)	-	1100	-
Clause 10.3 table 3(Carbon black content)	-	925	-
table 3(anti oxidant content)	-	2200	-

Complete

-
-

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

75-250mm

46212.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Wall Construction Designated as Type A)	-	300	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	300	-
7.3(Vicat softening temperature of pipes)	-	1100	-
7.4(Resistance to Dichloromethane)	-	1000	-
7.5(longitudinal reversion)	-	700	-
7.1(Appearance)	-	300	-
7.2(Colour )	-	0	-
8.2(Vicat softening temperature of fittings)	-	1100	-
8.3(Effect of Heating (Stress Relief Test))	-	950	-
9.1(Ring stiffness)	-	1400	-
9.2(Resistance to external blows at o C)	-	1400	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	-
9.4(Creep ratio)	-	26300	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	-
12.1(Elastomeric Sealing Ring Joints)	-	1150	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2300	-
9 (Table 12)(Performance Requirements)	-	11300	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 [email protected]

Scope List