BIS - LIMS (Laboratory Information Management System)

CIPET, Madurai

SIDCO Industrial Estate, Adjacent to Post office, K Pudur, Madurai-625007, Madurai, Madurai, Tamil Nadu, 625007

7603970148 [email protected]

Scope List

Reset

40 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Pipes for Soil and Waste Discharge System

13225 View breakup
Rs 12400 /- for Type A Rs 12725 for Type B Rs 825 for PVC resin Rs 21800 /- for effect of sun light

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	25% Discount on Testing Charge
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	25% Discount on Testing Charge
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	All dimension Included 25% Discount on Testing Charge
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	25% Discount on Testing Charge
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	25% Discount on Testing Charge
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	25% Discount on Testing Charge
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	25% Discount on Testing Charge
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	25% Discount on Testing Charge
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	25% Discount on Testing Charge
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	700	300 Sample Preparation charge 25% Discount on Testing Charge
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	25% Discount on Testing Charge
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	25% Discount on Testing Charge
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Natural Weathering 25% Discount on Testing Charge
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	500 Specimen Condition Charge 25% Discount on Testing Charge
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1100	300 Specimen Condition Charge 25% Discount on Testing Charge
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1100	250 Specimen Condition Charge 25% Discount on Testing Charge Before and After Exposure will be charged separately
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1100	25% Discount on Testing Charge
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	25% Discount on Testing Charge

Complete

22 May, 2024

-
Up to 200 ND only. Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

Emitting pipe systems

1462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1025	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1025	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1024.98	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500	600 Sample Preparation charge 25% Discount for BIS on Testing charge Only
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	25% Discount for BIS
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% Discount for BIS
6.3(General)	-	300	25% Discount for BIS
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	25% Discount for BIS
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	25% Discount for BIS
8.3.3(Flow Paths in Emitting Unit)	-	400	25% Discount for BIS
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	25% Discount for BIS
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	25% Discount for BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% Discount for BIS
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	25% Discount for BIS
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	399.98	25% Discount for BIS
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	25% Discount for BIS
8.8(Determination of Emitting Unit Exponent)	-	599.99	25% Discount for BIS

Complete

22 May, 2024

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Emitters

3525 View breakup
Rs.3525/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Flow path in emitters)	-	300	25 % Discount on testing charges
7.1(Construction and workmanship)	-	300	25 % Discount on testing charges
7.3.1(Resistance to Hydrostatic pressure)	-	1100	25 % Discount on testing charges
7.4.1(Emitter Pull Out In-line emitters)	-	500	25 % Discount on testing charges
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	25 % Discount on testing charges
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	25 % Discount on testing charges
8.3(Determination of Emitter Exponent)	-	600	Irrigation equipment - Emitters

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021. Regulated Emitters included w.e.f. 12-02-2020.

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

Unplasticized polyvinyl chloride (Pvc - U) screen and c

8294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	25% Discount on testing charge
9.5(Tensile Strength IS 12235(Part 13))	-	1100	500 Specimen Preparation charge 25% Discount on testing charge
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1100	300 Specimen Preparation charge 25% Discount on testing charge
9.3(Density IS 12235 (Part 14))	-	500	25% Discount on testing charge
9.2(Internal Diameter)	-	1000	Specimen preparation charge -500 25% Discount on testing charge
9.1( Visual Appearance)	-	300	25% Discount on testing charge
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% Discount on testing charge
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% Discount on testing charge
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	Included
8.4(Sealing rings - Hardness)	-	375	25% Discount on testing charge
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	0	25% Discount on testing charge
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	975	25% Discount on testing charge
7.3.2(Rib height)	-	0	25% Discount on testing charge
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100	25% Discount on testing charge
5(COLOUR)	-	300	25% Discount on testing charge

Complete

22 May, 2024

-
-

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Water Tank

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	25% Discount on testing charge
4.2.3(Carbon Dispersion Test)	-	700	25% Discount on testing charge
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	For capacity 25% Discount on testing charge
7.1.1(Resistance to Deformation)	-	1100	25% Discount on testing charge
6.1(Finish)	-	300	25% Discount on testing charge
7.2(Resistance to Impact)	-	1100	25% Discount on testing charge
7.3(Test for Top Load Resistance)	-	900	25% Discount on testing charge
7.4(Tensile Strength)	-	1100	200 Specimen Preparation charge 25% Discount on testing charge
7.5(Flexural Modulus)	-	1100	500 Sample Preparation charge 25% Discount on testing charge
7.6(overall Migration)	-	1700	500 Sample Conditioning Charge 25% Discount on testing charge
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1800	25% Discount on testing charge
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% Discount
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	750	25% Discount

Complete

22 May, 2024

-
-

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

3338 View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	Charges Inclusive of all test as per 10.3 of IS 4985 25% Discount
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	950	25% Discount
3.2.1, Table-1, Fig-1(Nominal size)	-	500	Charges Inclusive of all test as per 3 & 5 of IS 10124 25% Discount

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

PVC-U Fittings for Potable Water Supplies

1444 View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	25% Discount
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	25% Discount
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	25% Discount

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

90 degree elbows

4219 View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	500		25% Discount
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000		Charges inclusive of all test as per Clause 6.3 of IS 7834 25% Discount

Complete

22 May, 2024

-
Up to 200 ND only The following tests are Sub Contracted to other NABL accredited CIPET Labs as given below. 1. Effect on Water - M/s CIPET, Chennai, M/s CIPET, Bhopal, M/s CIPET, Jaipur Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	25% Discount
Cl. 6.2(Opacity- Appendix B)	-	575	25% Discount
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	25% Discount
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	25% Discount
Cl.4(Minimum Thickness)	-	500	25% Discount
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	Rs 500 inclusive of all dimension as described in Clause 4 and 5

Complete

22 May, 2024

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Upto 200ND Only

20244 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	300 Sample Preparation charge 25% Discount on Test Charges
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% Discount on Test Charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% Discount on Test Charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% Discount on Test Charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200 Sample Preparation charge 25% Discount
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	25% Discount on Test Charges
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% Discount on Test Charges
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	25% Discount on Test Charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	Inclusive of 7.1.1 2 7.1.1.1 ,7.1.2.1 7 7.2.1.1 7.2.1 25% Discount
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	0
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	Charged in 7.1.1.2
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Charged in 7.1.1.2
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	Charged in 7.1.1.2
Clause 10.7(Sulphated Ash Content)	-	950	25% Discount on Test Charges
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	Charged in 7.1.1.2
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Charged in 7.1.1.2
7.2.1(DIMENSIONS-Socket)	-	0	Charged in 7.1.1.2
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	Additional Rs 5000 for integral sealing ring socket 25% Discount on Test Charges on sub total
11.2(Resistance to External Blows at 0°C)	-	1000	300 Sample Preparation Charge 25% Discount on Test Charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	25% Discount on Test Charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% Discount on Test Charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% Discount on Test Charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200 Sample Preparation Charges 25% Discount on Test Charges
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	25% Discount on Test Charges
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
10.7(Sulphated Ash Content)	-	950	25% Discount on Test Charges
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	25% Discount on Test Charges
10.3(Effect on Water Test)	-	3000	25% Discount on Test Charges
6.1.2(PVC Resin)	-	4100	25% Discount on Test Charges
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
7.1.4(Length)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% Discount on Test Charges
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	25% Discount on Test Charges

Complete

22 May, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Madurai

SIDCO Industrial Estate, Adjacent to Post office, K Pudur, Madurai-625007, Madurai, Madurai, Tamil Nadu, 625007

7603970148 [email protected]

Scope List