BIS - LIMS (Laboratory Information Management System)

CIPET, Madurai

SIDCO Industrial Estate, Adjacent to Post office, K Pudur, Madurai-625007, Madurai, Madurai, Tamil Nadu, 625007

7603970148 [email protected]

Scope List

Reset

40 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

HDPE Crates

7838 View breakup
Rs.7,838/- (For BIS: Rs.7,837.50/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	25% Discount for BIS
2.3(Shape and Dimensions)	-	500	25% Discount for BIS
2.4(Mass )	-	300	25% Discount for BIS
2.5(Appearance and Surface Finish)	-	300	25% Discount for BIS
2.6(Colour Fastness)	-	300	25% Discount for BIS
2.7(Resistance to Stress)	-	1000	25% Discount for BIS
2.8(Resistance to Applied Load)	-	1100	25% Discount for BIS
2.9(Strength)	-	1100	1200 Specimen conditioning charges 25% Discount for BIS only on testing charges
2.1(Dimensional Stability)	-	900	25% Discount for BIS

Complete

22 May, 2024

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
• Rs.9,175/- • (For BIS: Rs.7,431/-) • For raw material (optional): Rs.6,075/-) • (For BIS: Rs.5,181.25/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25 % Discount for BIS on Testing charge
4.1.b(Potyethylene - anti-oxidant)	-	2000	25 % Discount for BIS on Testing charge
4.1.c.i (Density)	-	500	Rs 625 Sample Preparation charge 25 % Discount for BIS on Testing charge
4.1.c.ii (Toluene extract - Annex A)	-	1100	25 % Discount for BIS on Testing charge
4.1.c.iii (Volatile matter - Annex B )	-	700	25 % Discount for BIS on Testing charge
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25 % Discount for BIS on Testing charge
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25 % Discount for BIS on Testing charge
7.3(Tensile Test)	-	1100	Rs 300 Sample Preparation charge 25 % Discount for BIS on Testing charge
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % Discount for BIS on Testing charge
7.3(Elongation at Break)	-	0	With Tensile strength
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	25 % Discount for BIS on Testing charge
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	Rs 300 Inclusive of all dimension
7.2(Reversion Test)	-	1100	Rs 250 Sample Preparation charge 25 % Discount for BIS on Testing charge

Complete

22 May, 2024

-
-

IS 10889 (2004)

High density polyethylene films (First Revision)

5756 View breakup
• Rs.7675/- • (For BIS: Rs.5,756/-) • For raw material (optional): Rs.3225/- • (For BIS: Rs.3043.75/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	1050	25 % Discount on Testing Charges for BIS
5.2(Black Compound)	-	3850	25 % Discount on Testing Charges for BIS
6.1.1(Appearance)	-	300	25 % Discount on Testing Charges for BIS
6.1.5(Melt Flow Rate)	-	1100	25 % Discount on Testing Charges for BIS
6.2.1, Table 1(Nominal Thickness)	-	250	25 % Discount on Testing Charges for BIS
6.2.2, Table 2(Nominal Width)	-	250	25 % Discount on Testing Charges for BIS
6.4.1(Tensile Strength at Break)	-	2200	1100 for Machine Direction 1100 for Transverse Direction 25 % Discount on Testing Charges for BIS
6.4.2(Elongation at Break)	-	0	As per 6.4.1
6.4.3(Impact Resistance (Falling Dart))	-	850	25 % Discount on Testing Charges for BIS
6.4.3, Table 6(Average Thickness of Film)	-	250	25 % Discount on Testing Charges for BIS

Complete

22 May, 2024

-
-

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

- View breakup
• Rs.6,650/- • (For BIS: Rs.4,987.50/-) • For raw material (optional): Rs.2,750/- • (For BIS: Rs.2,062.50/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

34740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	5500	Sample Preparation Charges -500 ( Butt Welded sample to be submitted ) 25% Discount on the testing charges only
8.9 table-6(Elongation at Break)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.8(Tensile Strength for Butt-fusion)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.7(Density)	-	500	25% Discount on the testing charges only
8.5 (Oxidation Induction Time)	-	2200	25% Discount on the testing charges only
8.4( Melt Flow Rate)	-	1100	25% Discount on the testing charges only
8.2(Longitudinal Reversion Test)	-	700	Sample Preparation Charges - 200 25% Discount on the testing charges only
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	17400	Acceptance Test - Rs 1600 Type Test (165Hrs)- 4800 Type Test (1000Hrs) -11000 Sample Preparation Charge - 250 25% Discount on the testing charges only
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	25% Discount on the testing charges only
7.4.1.2(Ovality)	-	0	25% Discount on the testing charges only
7.4 table -3 & 4(6.1 Dimensions)	-	750	For all dimensions measurement test charges would be - 700 25% Discount on the testing charges only
7.2(Length)	-	250	25% Discount on the testing charges only
6.2.1(6.1.1 Identification Stripes)	-	250	25% Discount on the testing charges only
6.2(Colour)	-	250	25% Discount on the testing charges only
8.6(Overall migration)	-	1700	Sample Preparation Charges - 300 25% Discount on the testing charges only
8.3(Carbon black)	-	1625	Carbon Black Content- 925 Carbon Black Dispersion - 700 25% Discount on the testing charges only
5, 5.1 table-1(MATERIALS)	-	4025	Sample Preparation Charge -625 25% Discount on the testing charges only
5.3(e)(Carbon Black Master Batch)	-	925	25% Discount on the testing charges only

Complete

22 May, 2024

-
-

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

Straight Reducers

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
-

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

45 degree bends

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
-

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs 1444 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

woven sacks for packaging of 50 kg cement

7913 View breakup
Rs.7913/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	25% Discount for testing charge
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	25% Discount for testing charge
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	25% Discount for testing charge
4.2 (Fabric)	-	1050	25% Discount for testing charge
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	25% Discount for testing charge
4.4(Seam )	-	250	25% Discount for testing charge
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	25% Discount for testing charge
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	300	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge

Complete

22 May, 2024

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
Up to 200 ND only The following tests are Sub Contracted to other NABL accredited CIPET Labs as given below. 1. Effect on Water - M/s CIPET, Chennai, M/s CIPET, Bhopal, M/s CIPET, Jaipur Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

- View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
-

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

Unions

- View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

22 May, 2024

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
Rs 4219 /- Rs 3075 /- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	700	25% Discount on Test Charges
2.1(General)	-	575	25% Discount on Test Charges
2.2.2(diameter of the socket of cap)	-	250	25% Discount on Test Charges
2.2(Manufacture)	-	250	25% Discount on Test Charges

Complete

22 May, 2024

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

20605 View breakup
Rs 20605 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	300	25% Discount on Testing Charge
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	250	Material Identification will be charged separately 25% Discount on Testing Charge
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	250	Material Identification will be charged separately 25% Discount on Testing Charge
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250	25% Discount on Testing Charge
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	1050	25% Discount on Testing Charge
3.3(Sacks)	-	300	25% Discount on Testing Charge
4.1 , Table 1(REQUIREMENTS)	-	500	Ends per dm - 250, Picks Per dm 250 25% Discount on Testing Charge
4.3(Mass-(Annexure E))	-	250	25% Discount on Testing Charge
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2200	Specimen Conditioning charge ( UV -192 Hrs) 10180 25% Discount on Testing Charge

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

33275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	25% Discount on Testing Charge
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	25% Discount on Testing Charge
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	25% Discount on Testing Charge
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25% Discount on Testing Charge
4.3(Anti-oxidant)	-	1100	25% Discount on Testing Charge
5.1 table -1(DIMENSIONS OF PIPES)	-	500	25% Discount on Testing Charge
5.1.2(Ovality)	-	0	0
6.1(VISUAL APPEARANCE)	-	300	25% Discount on Testing Charge
7.1 Table -2(Hydraulic Characteristics)	-	6400	Acceptance test - 1600, Quality Test - 4800 25% Discount on Testing Charge
7.2(Reversion Test)	-	700	Specimen preparation charge - 300 will be extra 25% Discount on Testing Charges
7.3(Tensile Test)	-	1100	Specimen preparation charge - 250 will be extra 25% Discount on Testing Charges
7.4table-2(Fusion Compatibility Test)	-	6400	Acceptance test - 1600, Quality Test - 4800, 25% Discount on Testing Charge
7.5(Density)	-	500	Specimen preparation charge - 625 will be extra 25% Discount on Testing Charges
7.6(Melt now Rate (MFR))	-	1100	25% Discount on Testing Charges

Complete

22 May, 2024

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
Rs.17155/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	25% Discount on testing charge
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% Discount on testing charge
4.2(Construction)	-	250	25% Discount on testing charge
4.3(Sacks)	-	0	25% Discount on testing charge
4.4 and Table 1 i(Capacity)	-	250	25% Discount on testing charge
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% Discount on testing charge
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% Discount on testing charge
5.2 and Table 1 iii(Ends per dm )	-	250	25% Discount on testing charge
5.2 and Table 1 iv(Picks per dm )	-	250	25% Discount on testing charge
5.1 and Table 1 v(Mass of sack )	-	250	25% Discount on testing charge
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% Discount on testing charge
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	25% Discount on testing charge
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge Lengthwise and Width wise is included 25% Discount on testing charge
5.2 and Table 1 x(Ash content )	-	950	25% Discount on testing charge

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

17080 View breakup
Rs.17080/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	25% Discount on Testing Charge
3.3.1(Bottom seam (IS 10789))	-	250	25% Discount on Testing Charge
4.2 and Table 1 ii(Dimensions )	-	250	25% Discount on Testing Charge
5.2 and Table 1 iii(Ends per dm )	-	200	25% Discount on Testing Charge
5.2 and Table 1 iv(Picks per dm )	-	200	25% Discount on Testing Charge
4.2 and Table 1 v(Mass of sack )	-	300	25% Discount on Testing Charge
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	Lengthwise and Width Wise will separately charged 25% Discount on Testing Charge
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% Discount on Testing Charge
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	25% Discount on Testing Charge
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge towards UV exposure for 192 Hrs 25% Discount on Testing Charge
4.2 and Table 1 x(Ash content )	-	950	25% Discount on Testing Charge

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17268 View breakup
Rs.17268/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	300	25% Discount on Testing Charge
4.1(Raw Material)	-	1050	25% Discount on Testing Charge
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% Discount on Testing Charge
4.2(Construction)	-	250	25% Discount on Testing Charge
4.3.1(Bottom Seam)	-	250	25% Discount on Testing Charge
4.5 and Table 1 i(Capacity)	-	250	25% Discount on Testing Charge
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% Discount on Testing Charge
5.2 and Table 1 iii(Ends per dm )	-	200	25% Discount on Testing Charge
5.2 and Table 1 iv(Picks per dm )	-	200	25% Discount on Testing Charge
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	25% Discount on Testing Charge
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	25% Discount on Testing Charge
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge towards UV exposure 25% Discount on Testing Charge
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 x(Ash content )	-	950	25% Discount on Testing Charge

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

8681 View breakup
Rs 8681 /- Rs 3044 /- for raw material

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	300	25% Discount on Testing Charge
3(Designation)	-	300	25% Discount on Testing Charge
4(Colour)	-	300	25% Discount on Testing Charge
6(Dimensions of pipes)	-	250	25% Discount on Testing Charge
7(Visual Appearance)	-	300	25% Discount on Testing Charge
8.1(Hydraulic characteristics)	-	6400	Including Type and Acceptance Test 25% Discount on Testing Charge
8.2(Reversion)	-	700	300 for Specimen Preparation 25% Discount on Testing Charge
8.4(Melt Flow Rate)	-	1100	25% Discount on Testing Charge
8.3(Density)	-	500	25% Discount on Testing Charge
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25% Discount on Testing Charge
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25% Discount on Testing Charge

Complete

22 May, 2024

-
Up to 200 ND only The following tests are Sub Contracted to other NABL accredited CIPET Labs as given below. 1. Anti-Oxidant - M/s CIPET, Chennai Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

16903 View breakup
Rs.16903/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	25% Discount on Testing Charge
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	25% Discount on Testing Charge
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	25% Discount on Testing Charge
4.1 and Table 1 ii(Ends per dm )	-	250	25% Discount on Testing Charge
4.2 and Table 1 iv(Mass of sack )	-	250	25% Discount on Testing Charge
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	25% Discount on Testing Charge
4.1 and Table 1 ix(Ash content )	-	950	25% Discount on Testing Charge
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	RS 10340 will be charged towards specimen conditioning charge for UV Exposure length and Width wise will be charged separately 25% Discount on Testing Charge
4.1 and Table 1 iii(Picks per dm )	-	250	25% Discount on Testing Charge
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	25% Discount on Testing Charge
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	25% Discount on Testing Charge

Complete

22 May, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

quick coupled polyethylene pipes

33275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	25 % Discount on testing charge
6.1.3.1.1(Weldability Test)	-	6400	Including Acceptance and Quality Test 25 % Discount on testing charge
6.2, 6.2.1 (Quick Coupled Fittings)	-	300	Male and Female couplers will be charged separately 25 % Discount on testing charge
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	1700	25 % Discount on testing charge
6.1.1, 6.1.1.1(Leakage Test)	-	850	25 % Discount on testing charge
6.1(Quick Coupled Pipes and Fittings)	-	300	25 % Discount on testing charge
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	25 % Discount on testing charge
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Male and Female couplers will be charged separately 25 % Discount on testing charge
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Male and Female couplers will be charged separately 25 % Discount on testing charge
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	750	750 for each element Male and Female couplers will be charged separately 25 % Discount on testing charge
4.1 (b)(HDPE couplers —)	-	300	Male and Female couplers will be charged separately 25 % Discount on testing charge

Complete

22 May, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Madurai

SIDCO Industrial Estate, Adjacent to Post office, K Pudur, Madurai-625007, Madurai, Madurai, Tamil Nadu, 625007

7603970148 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found