BIS - LIMS (Laboratory Information Management System)

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

- [email protected]

Scope List

Reset

107 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

All Grade

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Lining and Cover - IS 444)	-	100	(10% Discount for BIS)
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	500	(10% Discount for BIS)
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	500	(10% Discount for BIS)
5(Lining - IS 444)	-	200	(10% Discount for BIS)
5(Reinforcement - IS 444)	-	200	(10% Discount for BIS)
5(Cover - IS 444)	-	200	(10% Discount for BIS)
6.4( thickness of the lining plus cover - ISO 4671)	-	200	(10% Discount for BIS)
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	200	(10% Discount for BIS)
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	200	(10% Discount for BIS)
7.2 - Table 3(Adhesion between components - ISO 8033)	-	200	(10% Discount for BIS)
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	200	(10% Discount for BIS)
7.2 - Table 3(Change in length at proof pressure - ISO 1402)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	(10% Discount for BIS)
Clause 3.1.1(Phosphorus)	-	500	(10% Discount for BIS)
Cl 4.1(Workmanship)	-	500	(10% Discount for BIS)
Cl 5 & 6(Diameter)	-	500	(10% Discount for BIS)
Cl 7(UTM)	-	500	(10% Discount for BIS)
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Grade

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	200	(10% Discount for BIS)
Clause -4, 4.1(SULPHUR)	-	200	(10% Discount for BIS)
Clause -4, 4.1(PHOSPHURS)	-	200	(10% Discount for BIS)
Clause -4, 4.1(MANGANESE)	-	200	(10% Discount for BIS)
Clause -4, 4.1(SILICON)	-	200	(10% Discount for BIS)
Clause -4, 4.1(Chromium)	-	300	(10% Discount for BIS)
Clause -4, 4.1(Nickel)	-	300	(10% Discount for BIS)
Clause -4, 4.1(Molybdenum)	-	300	(10% Discount for BIS)
Clause -4, 4.2(VANADIUM)	-	300	(10% Discount for BIS)
Clause -4, 4.3(TITANIUM)	-	300	(10% Discount for BIS)
Clause -4, 4.1(NIOBIUM)	-	300	(10% Discount for BIS)
Cl 8(Physical Requirements)	-	350	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

All Grade

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-1(Cu)	-	300	(10% Discount for BIS)
6.1 Table-1(Pb)	-	300	(10% Discount for BIS)
6.1 Table-1(Fe)	-	300	(10% Discount for BIS)
6.1 Table-1(Zn)	-	300	(10% Discount for BIS)
7.1.1(Tensile Test)	-	600	(10% Discount for BIS)
Table-2(Elongation)	-	600	(10% Discount for BIS)
Table-2(Transverse Bend)	-	300	(10% Discount for BIS)
Table-2(Longitudinal Bend)	-	300	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

All Grade

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	(10% Discount for BIS)
5.4.2(a)( Aggregates Impact Value)	-	500	(10% Discount for BIS)
5.4.3(a)( Aggregate Abrasion Value)	-	1000	(10% Discount for BIS)
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	(10% Discount for BIS)
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	(10% Discount for BIS)
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	(10% Discount for BIS)
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	(10% Discount for BIS)
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	(10% Discount for BIS)
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	500	(10% Discount for BIS)
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	(10% Discount for BIS)
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	(10% Discount for BIS)
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	(10% Discount for BIS)
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	(10% Discount for BIS)
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	100	(10% Discount for BIS)
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	100	(10% Discount for BIS)
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	100	(10% Discount for BIS)
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	100	(10% Discount for BIS)
5.5(Soundness By Magnesium Sulphate)	-	1500	(10% Discount for BIS)
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	(10% Discount for BIS)
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	200	(10% Discount for BIS)
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	200	(10% Discount for BIS)
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	200	(10% Discount for BIS)
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All Grade

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 1(Zn)	-	1000	(10% Discount for BIS)
8.1 Table 1(Cu)	-	1500	(10% Discount for BIS)
8.1 Table 1(Fe)	-	500	(10% Discount for BIS)
10.1(Mercurous Nitrate Test)	-	1500	(10% Discount for BIS)
7.0(Dimension and Tolerances)	-	500	(10% Discount for BIS)
9.1 Table-2(Tensile Strength)	-	500	(10% Discount for BIS)
9.1 Table-2(Elongation)	-	500	(10% Discount for BIS)
9.2(Vickers Hardness)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 303 (1989)

Plywood for General Purposes -

All Grade

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Width - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	300	(10% Discount for BIS)
8(Dimensions & Tolerances - Squareness - Annexure C)	-	300	(10% Discount for BIS)
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	(10% Discount for BIS)
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	(10% Discount for BIS)
11.3(Moisture Content - Part 1 of IS 1734)	-	500	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	200	(10% Discount for BIS)
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All Grade

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 & 8(Diameter)	-	200	(10% Discount for BIS)
Cl 9(Tensile Test On UTM)	-	750	(10% Discount for BIS)
9.2(Wrapping Test)	-	750	(10% Discount for BIS)
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	(10% Discount for BIS)
Cl 13(Workmanship)	-	500	(10% Discount for BIS)
7 & 8(Ovality)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Tensile Strength)	-	1500	(10% Discount for BIS)
12.1(Breaking load)	-	500	(10% Discount for BIS)
12.3(Ductility)	-	500	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
12.2(Uniformity of zinc coating)	-	1000	(10% Discount for BIS)
8(CHROMATING)	-	500	(10% Discount for BIS)
5 Table-1(Sizes Mass of Completed barbed wire)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

100

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	500	(10% Discount for BIS)
5.1(sulphur)	-	500	(10% Discount for BIS)
5.1(phosphorus)	-	500	(10% Discount for BIS)
5.1(manganese)	-	500	(10% Discount for BIS)
5.1(silicon )	-	500	(10% Discount for BIS)
5.1(aluminium)	-	500	(10% Discount for BIS)
5.1(copper)	-	500	(10% Discount for BIS)
5.1(nitrogen)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	500	(10% Discount for BIS)
Cl 14(Length, Width & Thickness)	-	500	(10% Discount for BIS)
Cl 13(Weight)	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	(10% Discount for BIS)
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	(10% Discount for BIS)
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

101

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grade

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1000	(10% Discount for BIS)
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	(10% Discount for BIS)
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	(10% Discount for BIS)
7.1(WORKMANSHIP AND FINISH)	-	500	(10% Discount for BIS)
10.1(FREEDOM FROM DEFECTS)	-	500	(10% Discount for BIS)
10.2(FREEDOM FROM DEFECTS)	-	1000	(10% Discount for BIS)
13(SIZE OF TEST BARS-Diameter)	-	500	(10% Discount for BIS)
13(SIZE OF TEST BARS-Length)	-	500	(10% Discount for BIS)
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	500	(10% Discount for BIS)
16, Table 3(Hardness Test)	-	500	(10% Discount for BIS)
17,Annex B(TRANSVERSE TEST)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

102

IS 208 (1996)

Door Handles - Specification ( Sixth Revision )

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Iron - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Aluminium - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Zinc - IS 3685:1966)	-	200	(10% Discount for BIS)
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	1000	(10% Discount for BIS)
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

103

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

All Grade

5000 View breakup
Rs.3150/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Aluminium- IS 2600:1964)	-	1000	(10% Discount for BIS)
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Copper- IS 2600:1964)	-	1000	(10% Discount for BIS)
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	1000	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	500	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Silicon - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Magnesium - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Iron - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Manganese - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Lead - IS 3635:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Titanium and or other grain refining elements - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Aluminium - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Iron - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Zinc - IS 3635:1966)	-	100	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-	100	(10% Discount for BIS)
6.1- Table 1(Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-	100	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-	100	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

104

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

All Grade

4800 View breakup
Rs.3150/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	200	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	200	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	200	(10% Discount for BIS)
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	200	(10% Discount for BIS)
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

105

IS 191 (2007)

Copper - Specification (Fourth Revision)

All Grade

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	1500	(10% Discount for BIS)
7.1 - Table 4(Phosphorus- IS 440)	-	500	(10% Discount for BIS)
5.1- Table 2(L)	-	200	(10% Discount for BIS)
5.1- Table 2(L1)	-	200	(10% Discount for BIS)
5.1- Table 2(h)	-	200	(10% Discount for BIS)
5.1- Table 2(h1)	-	200	(10% Discount for BIS)
5.1- Table 2(b)	-	200	(10% Discount for BIS)
5.1- Table 2(b1)	-	200	(10% Discount for BIS)
5.1- Table 2(R)	-	200	(10% Discount for BIS)
5.1- Table 2(R1)	-	200	(10% Discount for BIS)
5.1- Table 2(R2 )	-	200	(10% Discount for BIS)
5.1- Table 2(α )	-	200	(10% Discount for BIS)
5.1- Table 2( β )	-	200	(10% Discount for BIS)
5.1- Table 2(γ)	-	200	(10% Discount for BIS)
5.4-Table 3 (For Billets)(Mass)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Diameter)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Length)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	200	(10% Discount for BIS)
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	200	(10% Discount for BIS)
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	200	(10% Discount for BIS)
7.1 - Table 4(Silver- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Arsenic- IS440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Antimony-IS440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Bismuth-IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Nickel IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Lead IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Tin - IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Iron IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Znic-IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Oxygen IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Selenium - IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Tellurium- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Sulphur- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	(10% Discount for BIS)
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	200	-
7.1 - Table 4(Total Impurities- IS 440)	-	200	-

Complete

24 Jan, 2024

-
-

106

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

upto 300 mm all classes

17050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5(Tensile Strength IS 12235(Part 13))	-	750	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	150	(10% Discount for BIS)
9.1(Visual Appearance)	-	200	(10% Discount for BIS)
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	500	(10% Discount for BIS)
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	(10% Discount for BIS)
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	5000	(10% Discount for BIS)
4.1.2(K-Value as per IS-4669)	-	3500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

107

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

All Grade

12500 View breakup
Rs.10000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	500	(10% Discount for BIS)
7 Table-3 ii b(Expansion by Autoclave)	-	750	(10% Discount for BIS)
7 Table-3 iii a(Setting Time Initial)	-	500	(10% Discount for BIS)
7 Table-3 iii b(Setting Time Final)	-	500	(10% Discount for BIS)
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
6.1 Table-2 vi(Loss on ignition)	-	300	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

- [email protected]

Scope List