BIS - LIMS (Laboratory Information Management System)

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

- [email protected]

Scope List

Reset

107 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

All Grade

8400 View breakup
Rs 8400/-(10% discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	(10% Discount for BIS)
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	500	(10% Discount for BIS)
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	500	(10% Discount for BIS)
9.2, 11.4(Moisture content)	-	300	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

All Grade

4900 View breakup
Rs..4900/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
11 & 12(DIMENSIONS and Tolerances)	-	1000	(10% Discount for BIS)
9( FREEDOM FROM DEFECTS)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

All Grade

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	200	(10% Discount for BIS)
6.1(Manganese %)	-	200	(10% Discount for BIS)
6.1(Silicon %)	-	200	(10% Discount for BIS)
6.1(Sulphur %)	-	200	(10% Discount for BIS)
6.1(Phosphorus %)	-	200	(10% Discount for BIS)
Cl 9(Workmanship)	-	200	(10% Discount for BIS)
Cl 10.1(Workmanship)	-	200	(10% Discount for BIS)
Cl 11(Length, Width & Thickness)	-	1000	(10% Discount for BIS)
6.1(Ni)	-	200	(10% Discount for BIS)
6.1(Cr)	-	200	(10% Discount for BIS)
6.1(Mo)	-	200	(10% Discount for BIS)
6.1(V)	-	200	(10% Discount for BIS)
6.1( Ti)	-	200	(10% Discount for BIS)
6.1( Nb)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2547 : Part 1 (1976)

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

All Grade

8500 View breakup
Rs..8500/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition)	-	300	(10% Discount for BIS)
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO)	-	350	(10% Discount for BIS)
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O)	-	200	(10% Discount for BIS)
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime)	-	600	(10% Discount for BIS)
Cl 5.2, Table 3(Transverse Strength)	-	1000	(10% Discount for BIS)
Cl 5.2, Table 4(Soundness)	-	750	(10% Discount for BIS)
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	600	(10% Discount for BIS)
Cl 5.2, Table 7(Expansion On Setting %Max)	-	1500	(10% Discount for BIS)
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	1500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

All Grade

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3(Carbon)	-	300		-

Complete

24 Jan, 2024

-
-

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

All Grade

13000 View breakup
Rs..13000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Temperature Responsive Pressure Relief Device)	-	1000	(10% Discount for BIS)
8.1(Air Pressure Test)	-	1500	(10% Discount for BIS)
8.2(Proof Pressure Test)	-	1500	(10% Discount for BIS)
8.3(Operating Test for Pressure Regulating Device)	-	1500	(10% Discount for BIS)
8.9(Test for Spring Loaded Mechanism)	-	1500	(10% Discount for BIS)
8.5(Bursting Pressure Test)	-	1500	(10% Discount for BIS)
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

All Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	600	(10% Discount for BIS)
11.8(Buckling Test - IS 4020(Pt-9))	-	750	(10% Discount for BIS)
11.9(Slamming Test - IS 4020(Pt-10))	-	750	(10% Discount for BIS)
11.1(Misuse Test - IS 4020(Pt-11))	-	1000	(10% Discount for BIS)
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	1000	(10% Discount for BIS)
11.12(End Immersion Test - IS 4020(Pt-13))	-	1000	(10% Discount for BIS)
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	1000	(10% Discount for BIS)
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	750	(10% Discount for BIS)
11.13(Knife Test - IS 4020(Pt-14))	-	300	(10% Discount for BIS)
9.3(Workmanship & finish - IS 2202(Pt-1))	-	100	(10% Discount for BIS)
11.1(Variation in thickness - IS 4020 (Pt-2))	-	200	(10% Discount for BIS)
11.1( Squareness Test - IS 4020 (Pt-2))	-	200	(10% Discount for BIS)
11.1(Thickness - IS 4020 (Pt-2))	-	200	(10% Discount for BIS)
11.1(Width- IS 4020 (Pt-2))	-	200	(10% Discount for BIS)
11.1(Height - IS 4020 (Pt-2))	-	200	(10% Discount for BIS)
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	500	(10% Discount for BIS)
11.3(Depth of deviation - IS 4020(Pt-4))	-	300	(10% Discount for BIS)
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	500	(10% Discount for BIS)
11.4(Depth of indentation - IS 4020(Pt-5))	-	300	(10% Discount for BIS)
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

All Grade

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Physical requirments- Block density)	-	1500	(10% Discount for BIS)
8.4(Physical requirments- Compressive strength)	-	7000	(10% Discount for BIS)
8.6( Drying Shrinkage )	-	3000	(10% Discount for BIS)
8.5(Thermal Conductivity)	-	13000	(10% Discount for BIS)
8.2(Physical requirments-Dimensions-Length)	-	500	(10% Discount for BIS)
8.2(Physical requirments-Dimensions-Height)	-	500	(10% Discount for BIS)
8.2(Physical requirments-Dimensions-Width)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

All Grade

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	(10% Discount for BIS)
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	1500	(10% Discount for BIS)
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	7000	(10% Discount for BIS)
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1500	(10% Discount for BIS)
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	3000	(10% Discount for BIS)
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	3000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grade

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	300	(10% Discount for BIS)
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	300	(10% Discount for BIS)
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	300	(10% Discount for BIS)
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	200	(10% Discount for BIS)
Cl 7(Workmanship)	-	200	(10% Discount for BIS)
Cl 10.3(UTM)	-	200	(10% Discount for BIS)
Cl 11.3(Press)	-	200	(10% Discount for BIS)
Cl 13(Y Groove Cracking Test)	-	200	(10% Discount for BIS)
Cl 12(Sudden Load Applied)	-	200	(10% Discount for BIS)
Cl 15(Length, Width & Thickness)	-	1000	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	(10% Discount for BIS)
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 15, 16(Camber (Angle))	-	300	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Upto 40mm (All Grade)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	200	(10% Discount for BIS)
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	(10% Discount for BIS)
Cl. 8.1 Table 3(Yield Stress (YS))	-	300	(10% Discount for BIS)
Cl. 8.1 Table 3(Elongation, percentage)	-	200	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	500	(10% Discount for BIS)
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	1000	(10% Discount for BIS)
Cl. 7.2 Table -2 (Nominal Mass)	-	200	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	(10% Discount for BIS)
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	500	(10% Discount for BIS)
4.2(Niobium (Nb))	-	300	(10% Discount for BIS)
4.2(Boron (B))	-	300	(10% Discount for BIS)
Cl. 8.1 Table 3(TS/YS Ratio)	-	300	(10% Discount for BIS)
Cl. 9.3, Table 4(Bend Test )	-	600	(10% Discount for BIS)
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	600	(10% Discount for BIS)
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	(10% Discount for BIS)
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	(10% Discount for BIS)
5.7(PullOut (Bond Test))	-	6000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

All Grade

7850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	300	(10% Discount for BIS)
7.3(Dimensional Requirements - Squareness - Annexure D)	-	300	(10% Discount for BIS)
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1500	(10% Discount for BIS)
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	(10% Discount for BIS)
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	(10% Discount for BIS)
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	750	(10% Discount for BIS)
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	750	(10% Discount for BIS)
9.2.6(Spot test - Annexure L)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

For Category 01 only

30750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	600	10% Discount for BIS
3.1(MATERIALS : CONDUCTOR)	-	300	10% Discount for BIS
13.1.2(Armouring: Coverage )	-	300	10% Discount for BIS
13.2(ARMOURING : Type of Armour)	-	300	10% Discount for BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	300	10% Discount for BIS
13.3(Armouring : Dimensions -Formed wire )	-	300	10% Discount for BIS
13.1.3(ARMOURING : Direction of lay )	-	300	10% Discount for BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	300	10% Discount for BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	300	10% Discount for BIS
13.6 a)(ARMOURING: Tensile Strength)	-	300	10% Discount for BIS
13.6 b)(ARMOURING: Elongation )	-	300	10% Discount for BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	300	10% Discount for BIS
13.6 g)(ARMOURING: Resistivity)	-	300	10% Discount for BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	300	10% Discount for BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	300	10% Discount for BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	300	10% Discount for BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	300	10% Discount for BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	300	10% Discount for BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	300	10% Discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	300	10% Discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	300	10% Discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	300	10% Discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	300	10% Discount for BIS
4.1.1(INSULATION : General Purjose Insulaiion)	-	300	10% Discount for BIS
4.1.2(INSULATION : Heat Resisting Insulation)	-	300	10% Discount for BIS
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	300	10% Discount for BIS
9.1(INSULATION )	-	300	10% Discount for BIS
9.2(INSULATION : Thickness of Insulation)	-	300	10% Discount for BIS
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	300	10% Discount for BIS
9.4(INSULATION : Application of Insulation)	-	300	10% Discount for BIS
10.1(CORE IDENTIFICATION)	-	300	10% Discount for BIS
10.2(CORE IDENTIFICATION)	-	300	10% Discount for BIS
10.3(CORE IDENTIFICATION)	-	300	10% Discount for BIS
10.3.1(Arrangement of Marking)	-	300	10% Discount for BIS
11.1(LAYING UP OF CORES)	-	300	10% Discount for BIS
12.1(INNER SHEATH)	-	300	10% Discount for BIS
12.2(INNER SHEATH)	-	300	10% Discount for BIS
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	10% Discount for BIS
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	300	10% Discount for BIS
14.2(OUTER SHEATH)	-	300	10% Discount for BIS
14.3(OUTER SHEATH : Colour )	-	300	10% Discount for BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	10% Discount for BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	300	10% Discount for BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	300	10% Discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	300	10% Discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	300	10% Discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	300	10% Discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	300	10% Discount for BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	300	10% Discount for BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	300	10% Discount for BIS
15.1 d)4)(Hot deformation : Insulation )	-	300	10% Discount for BIS
15.1 d)4)(Hot deformation : Sheath )	-	300	10% Discount for BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	300	10% Discount for BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	300	10% Discount for BIS
15.1 d)6)(Heat shock test- Insulation )	-	300	10% Discount for BIS
15.1 d)6)(Heat shock test- sheath )	-	300	10% Discount for BIS
15.1 d)7)(Thermal stability- insulation )	-	300	10% Discount for BIS
15.1 d)7)(Thermal stability- Sheath )	-	300	10% Discount for BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	300	10% Discount for BIS
15.1 e)(Insulation resistance test : IR Constant )	-	300	10% Discount for BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	300	10% Discount for BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	300	10% Discount for BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	300	10% Discount for BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	300	10% Discount for BIS
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	300	10% Discount for BIS
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	300	10% Discount for BIS
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	300	10% Discount for BIS
16.4(Flammability Test)	-	300	10% Discount for BIS
16.5(Oxygen Index Test)	-	300	10% Discount for BIS
16.6(Flame Retardance Test on Single Cables)	-	300	10% Discount for BIS
16.7(Flame Retardance Test on Bunched Cables)	-	300	10% Discount for BIS
16.9(Test for Halogen Acid Gas Evolution)	-	300	10% Discount for BIS
16.1(Temperature Index)	-	300	10% Discount for BIS
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	300	10% Discount for BIS
17.2(IDENTIFICATION : Cable Identification)	-	300	10% Discount for BIS
17.2.1(IDENTIFICATION : Cable Identification)	-	300	10% Discount for BIS
17.3(IDENTIFICATION : Cable Code)	-	300	10% Discount for BIS
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	300	10% Discount for BIS
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	300	10% Discount for BIS
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	300	10% Discount for BIS
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	300	10% Discount for BIS
16.4(Flammability Test- Un affected portion)	-	300	10% Discount for BIS
16.4(Flammability Test- Period of Burning)	-	300	10% Discount for BIS

Complete

24 Jan, 2024

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

All Grade

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	200	(10% Discount for BIS)
7 -Table 2- i(Fineness 4031 Part 2)	-	750	(10% Discount for BIS)
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	(10% Discount for BIS)
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	(10% Discount for BIS)
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

All Grade

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	350	(10% Discount for BIS)
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	200	(10% Discount for BIS)
7 -Table 2- i(Fineness 4031 Part 2)	-	750	(10% Discount for BIS)
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	(10% Discount for BIS)
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	(10% Discount for BIS)
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

All Grade

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	200	10% Discount for BIS
3 Tables 2 to 9(Types)	-	-	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	-	-
5.1 Tables 2 to 9 (3)(Length A)	-	-	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	-	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	-	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	-	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	-	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	-	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	-	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	-	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	-	-
6.1(General)	-	-	-
6.2.1(Knuckles)	-	-	-
6.3(Pins)	-	-	-
6.4(Screw Holes)	-	-	-
6.4.2(Position of Holes)	-	-	-
7(Finish)	-	-	-

Complete

24 Jan, 2024

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

All Grade

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	(10% Discount for BIS)
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	(10% Discount for BIS)
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	(10% Discount for BIS)
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	1000	(10% Discount for BIS)
8(Dimensions & Tolerances - Squareness - Annexure C)	-	1000	(10% Discount for BIS)
9(Finish - Cl. 9.1, 8.3)	-	500	(10% Discount for BIS)
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	(10% Discount for BIS)
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	8500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Plain Ended Pipe Only

6550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	600	(10% Discount for BIS)
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2100	(10% Discount for BIS)
Cl 10.1.1(Manufacturing )	-	-	-
Cl 15(Workmanship)	-	-	-

Complete

24 Jan, 2024

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

All Grade

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	(10% Discount for BIS)
Cl 12.5(Water absorption)	-	500	(10% Discount for BIS)
Cl 12.6(Wet transverse strength )	-	750	(10% Discount for BIS)
Cl 12.7(Resistance to wear)	-	750	(10% Discount for BIS)
Cl 12.7(Resistance to wear)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

All Grade

6500 View breakup
Rs..8000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	200	(10% Discount for BIS)
Clause - 5.1, Table-3(SULPHUR)	-	200	(10% Discount for BIS)
Cl 6(Outer Diameter, Thickness & Mass)	-	300	(10% Discount for BIS
Cl 7(Workmanship)	-	300	(10% Discount for BIS
Cl 9(Workmanship)	-	300	(10% Discount for BIS
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	300	(10% Discount for BIS
Clause - 5.1, Table-3(PHOSPHURS)	-	300	(10% Discount for BIS
Clause - 5.1, Table-3(MANGANESE)	-	300	(10% Discount for BIS
Clause - 5.1, Table-3(SILICON)	-	300	(10% Discount for BIS
5 AND AS PER IS 10748(COPPER)	-	300	(10% Discount for BIS

Complete

24 Jan, 2024

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All Grade

5300 View breakup
Rs.5500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	300	(10% Discount for BIS)
6.1(Manganese %)	-	300	(10% Discount for BIS)
Cl 8(UTM)	-	500	(10% Discount for BIS)
Cl 10(Die Press)	-	500	(10% Discount for BIS)
Cl 12(Workmanship)	-	200	(10% Discount for BIS)
Cl 13(Length, Width & Thickness)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

All Grade

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Size and Dimension )	-	500	(10% Discount for BIS)
7.3(Hydraulic test requirement)	-	2000	(10% Discount for BIS)
7(Nozzle)	-	2000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

All Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	500	(10% Discount for BIS)
Cl 5.2(Resistance to Leakage)	-	1000	(10% Discount for BIS)
Cl 5.3(Strength)	-	1000	(10% Discount for BIS)
Cl 5.5(Swinging)	-	300	(10% Discount for BIS)
Cl 5.6(Reel Action)	-	300	(10% Discount for BIS)
Cl 6(Workmanship)	-	300	(10% Discount for BIS)
Cl 7(Painting)	-	300	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

All Grade

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	2000	(10% Discount for BIS)
4 Table (i)(BWR (Boiling Water Resistant))	-	2000	(10% Discount for BIS)
4 Table (i)(MR (Moisture Ressistant))	-	1000	(10% Discount for BIS)
7.4(Acidity and Alkalinity ( pH))	-	1500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

All Grade

11300 View breakup
Rs..11300/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	500	(10% Discount for BIS)
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	750	(10% Discount for BIS)
9.1.3 , 9.1.3.1.1(Water resistance test)	-	1000	(10% Discount for BIS)
9.1.4(Tensile strength)	-	1000	(10% Discount for BIS)
9.1.5(Mycological test)	-	1500	(10% Discount for BIS)
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	750	(10% Discount for BIS)
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	750	(10% Discount for BIS)
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	250	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Only for category 01

25300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Annealing test (for copper))	-	600	(10% Discount for BIS)
4.1(Tensile test (for Al)- After Stranding)	-	600	(10% Discount for BIS)
4.2(Conductor resistance test)	-	750	(10% Discount for BIS)
9(Overall dimensions)	-	400	(10% Discount for BIS)
4.1(Conductor - Material)	-	200	(10% Discount for BIS)
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	200	(10% Discount for BIS)
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	(10% Discount for BIS)
4.1(Conductor - Material)	-	200	(10% Discount for BIS)
5.2(Application )	-	200	(10% Discount for BIS)
12.0(Core identification)	-	200	(10% Discount for BIS)
5.3(Thickness of Insulation)	-	200	(10% Discount for BIS)
5.1(Insulation)	-	200	(10% Discount for BIS)
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	200	(10% Discount for BIS)
Table 1 iii) c) 1)(Elongation (Without ageing))	-	200	(10% Discount for BIS)
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	200	(10% Discount for BIS)
Table 1 iii) c) 3)(TS variation)	-	200	(10% Discount for BIS)
Table 1 iii) c) 3)(Elongation (After ageing))	-	200	(10% Discount for BIS)
Table 1 iii) c) 3)(Elongation variation)	-	200	(10% Discount for BIS)
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	200	(10% Discount for BIS)
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	200	(10% Discount for BIS)
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	(10% Discount for BIS)
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	400	(10% Discount for BIS)
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	750	(10% Discount for BIS)
10.1(HV (water immersion))	-	500	(10% Discount for BIS)
10.1(HV (water immersion))	-	500	(10% Discount for BIS)
10.2(HV (room temperature))	-	500	(10% Discount for BIS)
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	(10% Discount for BIS)
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	(10% Discount for BIS)
table 1 e) 3) (IR constant- Room temp )	-	200	(10% Discount for BIS)
table 1 e) 3) (IR constant- max. Temp)	-	200	(10% Discount for BIS)
10.4(Flammability test-Burning after flame removal)	-	350	(10% Discount for BIS)
10.4(Flammability test- Unaffected portion)	-	350	(10% Discount for BIS)
10.5(Oxygen index)	-	2000	(10% Discount for BIS)
10.6(Halogen evolution)	-	2500	(10% Discount for BIS)
10.7(Temperature index)	-	2000	(10% Discount for BIS)
10.8(Smoke density rating)	-	2000	(10% Discount for BIS)
11(Identification)	-	200	(10% Discount for BIS)
11.1(Durability)	-	200	(10% Discount for BIS)
11.2(Legibility)	-	200	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

All Grade

10600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	1000	10% discount for BIS
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	300	10% discount for BIS
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	300	10% discount for BIS
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	500	10% discount for BIS
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	1000	10% discount for BIS
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	1500	10% discount for BIS
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	500	10% discount for BIS
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	500	10% discount for BIS
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	500	10% discount for BIS
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	500	10% discount for BIS
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	500	10% discount for BIS
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	500	10% discount for BIS
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	500	10% discount for BIS
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	500	10% discount for BIS

Complete

24 Jan, 2024

-
-

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

Above 0.6mm thickness

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	200	(10% Discount for BIS)
6.0(SULPHUR)	-	200	(10% Discount for BIS)
6.0(PHOSPHORUS)	-	200	(10% Discount for BIS)
6.0(MANGANESE)	-	200	(10% Discount for BIS)
6.0(SILICON)	-	200	(10% Discount for BIS)
6.0(ALUMINIUM)	-	200	(10% Discount for BIS)
6.0(NITROGEN)	-	200	(10% Discount for BIS)
Cl 7(UTM)	-	500	(10% Discount for BIS)
Cl 9(Workmanship)	-	500	(10% Discount for BIS)
Cl 10(Length, Width & Thickness)	-	500	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Above 0.6mm thickness

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	2800	(10% Discount for BIS)
8(Mechanical and Physical Properties)	-	7200	(10% Discount for BIS)
Cl 8(UTM)	-	800	(10% Discount for BIS)
Cl 10(Workmanship)	-	500	(10% Discount for BIS)
Cl 11(Length, Width & Thickness)	-	1000	(10% Discount for BIS)

Complete

24 Jan, 2024

-
-

IS 455 (2015)

Portland slag cement - Specification

All Grade

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	300	(10% Discount for BIS)
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	200	(10% Discount for BIS)
7 Table 1 i(Fineness IS 4031(Part 2))	-	500	(10% Discount for BIS)
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	750	(10% Discount for BIS)
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	750	(10% Discount for BIS)
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	(10% Discount for BIS)
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	(10% Discount for BIS)
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	0	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	0	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	0	-

Complete

24 Jan, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

- [email protected]

Scope List