BIS - LIMS (Laboratory Information Management System)

National Test House (NR)

Kamla Nehru Nagar,Ghaziabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

9999472699 [email protected]

Scope List

Reset

44 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	10	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1,b(Marking )	-	10	-
8.1,c(Marking )	-	10	-
8.1,d(Marking )	-	10	-
8.1,e(Marking )	-	10	-
8.1,f(Marking )	-	10	-
8.1,g(Marking )	-	10	-
8.2(Marking )	-	10	-
8.3,a(Marking )	-	10	-
8.3,b(Marking )	-	10	-
8.3,c(Marking )	-	10	-
8.3,d(Marking )	-	10	-
8.3,e(Marking )	-	10	-
8.4(Marking )	-	10	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	10	-
6.2(Rating)	-	200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	400	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	400	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	800	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	100	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	100	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	100	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	400	-
10.1(Speed Regulators)	-	100	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	200	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	50	-
10.5(Speed Regulators)	-	50	-
10.6(Speed Regulators)	-	50	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	50	-
11.1(Starting)	-	50	-
11.2(Starting)	-	50	-
12(Interchangeability)	-	100	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.3 & Table 1(Test for Air Performance)	-	100	-
14.4(Measurement of Speed of the Fan )	-	200	-
14.4(Measurement of Speed of the Fan )	-	100	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	500	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	100	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	200	-

Complete

-
-

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

- View breakup
Rs.5000/- for each fan, 15000/- for 3 fans

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

- View breakup
For BIS samples: BIS approved testing charges, for others: Rs.8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 4283 (1981)

Withdrawal

- View breakup
Rs.10000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.2(Diameter & Ovality)	-	500	-
Cl 6.2(Weight)	-	500	-
Cl 5.1(Workmanship)	-	1000	-
Cl 8(Physical Requirements)	-	1000	-
Cl 9.3(Press)	-	1000	-
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.3(TITANIUM)	-	500	-
Clause -4, 4.2(VANADIUM)	-	500	-
Clause -4, 4.1(Molybdenum)	-	500	-
Clause -4, 4.1(Chromium)	-	500	-
Clause -4, 4.1(Nickel)	-	500	-
Clause -4, 4.1( ALUMINIUM)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(NITROGEN)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-

Complete

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1000	-
Cl 4.1(Workmanship)	-	1000	-
Cl 5 & 6(Diameter)	-	1000	-
Cl 7(UTM)	-	2000	-
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-

Complete

-
-

IS 5206 (1983)

Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

- View breakup
Rs.20000/- Full test, (Rs.16500/- Mechanical Test, Rs.3500/- Chemical test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
E13, E16, E18, E19, E20, E23, E25, E29

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1- Table 4(Thickness of Body and Bonnet- IS 778)	-	200	-
8.6- Table 9 to Table 12(End to end/ centre to ends/ Face to face/Centre to face dimension )	-	200	-
8.2 - Table 5(Flat to Flat size -IS 778 )	-	200	-
8.3 - Table 6(Width of end - IS 778)	-	200	-
8.4 - Table 7(Stem Diameters - IS 778)	-	200	-
8.5 - Table 8(Size of packing space - IS 778)	-	200	-
8.5 - Table 8(Depth of stuffing box - IS 778)	-	200	-
8.5 - Table 8(Dia of stuffing box - IS 778)	-	200	-
9.3-Table 13(Body Test ( Hydrostatic))	-	1250	-
9.4(Back Seat Test )	-	1250	-
6- Table 1-i)(Brass(Body)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-i)(Leaded tin Bronze(Body)-Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-ii)(Leaded tin Bronze(Bonnet or cover)-Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-ii)(Forged Brass(Bonnet or cover)-Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-ii)(Brass(Bonnet or cover)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Leaded tin bronze(Stuffing box) - Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (disc hinge)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze( check nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (stem nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (disc retaining nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (gland)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (gland nut) - Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze ( gland flange)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (body seat rings)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze ( disc or wedge facing rings )- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Extruded brass rod (Stuffing box) - Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode(disc hinge)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)( Extruded brass rode (check nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (stem nut) - Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (disc retaining nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (gland )- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (gland nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode ( gland flange)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (body seat rings)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode( disc or wedge facing rings)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Forged brass (Stuffing box)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass(disc hinge)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass ( check nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (stem nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (disc retaining nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland flange)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (body seat rings)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (disc or wedge facing rings)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Brass(Stuffing box)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass (disc hinge)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass( check nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(stem nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(disc retaining nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland flange)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(body seat rings)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass( disc or wedge facing rings)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iv)(Extruded brass rod (stem)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( stem) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iv)(Extruded brass rod (hinge pin)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass ( hinge pin) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( hinge pin) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iv)(Extruded brass rod (plug)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass( plug) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( plug) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-v)(Chromium steel (Ball for ball type check valves) - Cl 5.1 and table 1 of IS 4398)	-	5000	-
6- Table 1-vi)(Mild steel (Bolts, nuts) - IS 1367)	-	5000	-
6- Table 1-vii)(Cast iron (Handwheel ) - Cl 6.1 of IS 210)	-	2000	-
6- Table 1-x)(Phosphor bronze wire (Spring) - As per Cl 6.1, Table 1 of IS 7608)	-	2500	-

Complete

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

- View breakup
For BIS samples: BIS approved Testng charges. For Others: Rs.15000 (Inclusive of safety testing charges as per IS 302-2-35 @ Rs.5000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
Rs.20000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

BWR/MR/TYPE I/TYPE II

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	0	-
4.1(Grade - For MR)	-	0	-
4.2(Type - For Type 1)	-	0	-
4.2(Type - For Type 2)	-	0	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	250	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	250	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	250	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	250	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	250	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	250	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	250	-
9(Finish - Cl. 9.1, 8.3)	-	0	-
9(Finish - Cl. 9.2, 8.3)	-	0	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2000	-

Complete

-
-

IS 6419 (1996)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Copper Content of Coated Wire or Rod)	-	500	-
14.1 Table 7(Carbon-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Manganese-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Silicon-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Phosphorous-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Sulphur-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Nickel-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Chromium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Copper-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Molybdenum-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Vanadium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Titanium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Aluminium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Mo+Ni+Cr-Relevant parts of IS 228)	-	500	-
5(Diameter)	-	500	-
6(Reels for Wire)	-	500	-
7(Reeling Condition)	-	500	-
8(Dimension of Spools, Rims & Coils)	-	1500	-
10.1(Finish)	-	500	-
10.2.2 Table 6(Cast- As per Cl.10.2.2 )	-	500	-
10.2.3 Table 6(Helix- As per Cl.10.2.3 )	-	500	-
10.2.1(Welding rods and bare electrodes for gas shielded arc welding of structural steel)	-	1000	-
14.2(Soundness test)	-	1000	-
14.3.2(Yield Stress)	-	1000	-
14.3.2(UTS)	-	1000	-
14.3.2(% of Elongation)	-	1000	-
14.3.3(Impact Test)	-	3000	-

Complete

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Reversion)	-	1000	-
8.1(Hydraulic characteristics)	-	5000	-
8.3(Density)	-	1500	-
8.4(Melt Flow Rate)	-	1000	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	-
6(Dimensions of pipes)	-	500	-
10(Marking)	-	500	-
3(Designation)	-	500	-
4(Colour)	-	500	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-

Complete

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	1000	-
8.9(Marking)	-	500	-
6(Rating)	-	500	-
7(Classification)	-	500	-
10(Protection against Electric Shock)	-	500	-
11.1(Provision for earthing)	-	500	-
12(Terminals)	-	500	-
12.2.2(Connection of conductor)	-	500	-
12.2.3(Mechanical strength of terminals)	-	500	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

National Test House (NR)

Kamla Nehru Nagar,Ghaziabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

9999472699 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found