BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List

Reset

274 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 45o Bend)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-

Complete

-
-

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1) (Dimensions of 60o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-

Complete

-
-

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 90o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-

Complete

-
-

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2 (Materials)	-
3.3, 3.3.1, Fig 1 (Manufacture)	-
3.3.2, table 1, fig 1 (Dimensions)	-
3.3.3 (socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.3.1 and 3.3.2) (Dimensions of Threaded Adaptors)	-

Complete

-
-

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-
Table 2 (Cl.3.2.2, and Fig.1) (Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-

Complete

-
-

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Equal Tees)	-

Complete

-
-

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Caps)	-

Complete

-
-

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table-1 (cl.3.2.2, Fig 1) (Dimensions of Straight Reducers)	-

Complete

-
-

IS 10109 (2018)

Oil pressure stoves - Offset burner type - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.4 (Minimum Sheet thickness of fuel container)	-

Partial

-
-

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl.6) (Finish)	-

Partial

-
-

IS 6031 (1997)

Calcium propionate, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (DESCRIPTION)	-

Partial

-
-

IS 6022 (1994)

Fast green FCF, food grade specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Freedom from Contaminants)	-
3.1, Table 1, (i) (Total dye content, corrected for sample dried at 105 ± 1 ̊C for 2 h)	-

Partial

-
-

IS 5719 (2017)

Gelatin, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-

Partial

-
-

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-

Partial

-
-

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-

Partial

-
-

IS 3444 (1999)

Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (FREEDOM FROM DEFECTS)	-
13 (MECHANICAL TESTS)	-
Cl.13.2 (Tensiie Test)	-
Cl.13.2 (Elongation)	-
Cl. 13.3 (Hardness Test)	-

Partial

-
-

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Form and Description)	-
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-

Partial

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength)	-

Partial

-
-

IS 13489 (2000)

Textiles – Bed mattress – Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 a) (Length)	-
5.1 b) (Width)	-
5.1 c) (Thickness)	-
3 (TYPES)	-
4 Table 1 (MATERIALS)	-
4 Table 1 i)a) IS 175 (Case)	-
4 Table 1 ii) a) 1S8391 (Cushioning)	-
4 Table 1 ii) b) IS 1741 (Cushioning)	-
4 Table 1 ii) c) IS 7933 (Cushioning)	-
4 Table 1 iii) a) IS 1920 (Piping)	-
4 Table 1 ii) b) IS 1741 (Cushioning)	-
4 Table 1 ii) c) IS 7933 (Cushioning)	-
4 Table 1 iii) a) IS 1920 (Piping)	-
4 Table 1 iii) b) IS 3252 (Piping)	-
4 Table 1 iv) IS 1895 (Tying tapes)	-
5.1 Fig. l (Type 1 Mattress)	-
5.2 (Type 2 Mattress)	-
5.2 a) (Length)	-
5.2 b) (Width)	-
5.2 c) (Thickness)	-
6.1 (MANUFACTURE)	-
6.2 (MANUFACTURE)	-
6.3 (MANUFACTURE)	-
6.4 (MANUFACTURE)	-
6.5 (MANUFACTURE)	-
3 (TYPES)	-
cl. 7.2 (BIS certification marking)	-
cl. 7.1 (marking)	-

Complete

-
-

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 and 6.2.1 ( Strength of toys other than swings)	-
4.1.2 and A.4.1.2 (Maximum height)	-
4.1.3 and A.4.1.3 (Corners and edges on moving parts)	-
4.1.4.1 and 6.7.1 and Fig.6 (Protruding parts)	-
4.1.4.2 and 6.7.1 and Fig.7 (All protrusions)	-
4.1.4.3 and 6.7.1 and Fig.8 (Upright protrusions)	-
4.1.4.4 and 6.7.2 (Motion rides)	-
4.1.4.5 and 6.7.1.2 and Fig.9 (Slides)	-
4.1.4.5 (Slides)	-
4.1.5 and A.4.1.5. (Climbing and swinging ropes, chains and cables)	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-
4.2 and A.4.2. (Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-
4.2 and A.4.2. (Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-
4.2 and A.4.2. (Barriers for platforms more than 1 830 mm above the ground)	-
4.2 and A.4.2. (Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-
4.2 and A.4.2. (Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-
4.2 and A.4.2. and 4.6.2 and 4.6.3 (For barriers with an uneven top design)	-
4.3 (Rung ladders, stepladders and stairways)	-
4.3 a and Fig.10 (The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-
4.3 b and Fig.10 (The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-
4.3 c (The surface of the tread shall not be slippery)	-
4.3 d (The diameter or cross-sectional dimension of the rungs on rung ladders)	-
4.3.e (The depth of treads on stepladders with closed risers or stairways)	-
4.3 f (The inclination of stairways)	-
4.3 f (The inclination of stepladders)	-
4.3 f (The inclination of rung ladders)	-
4.3 g (Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-
4.3 g (A means of continuous hand support from a height of 760 mm)	-
4.4.1 (Head and neck entrapment)	-
4.4.2 (Entrapment of clothing and hair)	-
4.4.3 (Entrapment of feet)	-
4.4.4 (Entrapment of fingers)	-
4.5.1 (Stability of activity toys other than slides, swings and toys with crossbeams - General)	-
4.5.2 (Stability of activity toys with a free height of fall of 600 mm or less)	-
4.5.3 (Stability of activity toys with a free height of fall of more than 600 mm)	-
4.6.1 and A.4.6. (Stability of slides)	-
4.6.2 a and A.4.6. (Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-
4.6.2 b and A.4.6. (Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-
4.6.3 a and A.4.6. (Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-
4.6.3 a and A.4.6. (Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-
4.6.3 a and A.4.6. (Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-
4.6.3 b and A.4.6. (Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-
4.6.3 b and A.4.6. (Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-
4.6.3 b and A.4.6. (Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-
4.6.3 c and A.4.6. (Starting, sliding and run-out section on slides)	-
4.6.3 d and A.4.6. (The angle of inclination to the horizontal of the sliding section)	-
4.6.3 e and A.4.6. (The run-out section for the slide)	-
4.6.3 e and A.4.6. (The run-out section for the slide)	-
4.6.3 e and A.4.6. (The run-out section for the slide)	-
4.6.3 f and A.4.6. (The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-
4.6.4 and A.4.6. (Roller slides)	-
4.6.4 and A.4.6. (Roller slides)	-
4.6.4 and A.4.6. (Roller slides)	-
4.7.2 and A.4.7.2 (Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-
4.7.3.1 (Swings intended for children under 36 months)	-
4.7.3.1 (Swings intended for children under 36 months)	-
4.7.5 (Minimum clearance between swing elements, and similar equipment and adjacent structures)	-
4.7.5 (Free swinging elements)	-
4.7.5 (Elements excluding free swinging)	-
4.7.6 and A.4.7.6 (Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-
4.7.7 (Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-
4.7.7 (Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-
4.7.7 (Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-
4.7.7 (Minimum clearance between swing elements and the ground - Footrests of swing elements)	-
4.7.8 a and A.4.7.8 (Suspension connectors and means of suspension)	-
4.7.8 b and A.4.7.8 (Suspension connectors and means of suspension)	-
4.7.8 c and A.4.7.8 (Ropes used as means of suspension - Diameter )	-
4.7.8 d and A.4.7.8 (Straps and chains - Width)	-
4.7.8 d and A.4.7.8 (Accessible chains)	-
4.7.8 e and A.4.7.8 (Suspension connectors and means of suspension)	-
4.7.8 f and A.4.7.8 (Suspension connectors and means of suspension)	-
4.8 (Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-
4.8 (Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-
4.8 (Seesaws )	-
4.9 (Carousels and rocking toys)	-
4.9 (Carousels and rocking toys)	-
4.10.1 and A.4.10 (Inflatable activity toys - General)	-
4.10.2 and A.4.10 (Inflatable activity toys - Anchorage)	-
4.10.2 and A.4.10 (Inflatable activity toys - Anchorage)	-
4.10.2 and A.4.10 (Inflatable activity toys - Anchorage)	-
4.10.2 and A.4.10 (Inflatable activity toys - Anchorage)	-
4.10.2 and A.4.10 (Inflatable activity toys - Anchorage)	-
4.10.3 and A.4.10 (Connection tubes for continuous inflation)	-
4.10.4.1 and A.4.10 (Containment - General)	-
4.10.4.1 and A.4.10 (Containment - General)	-
4.10.4.1 and A.4.10 (Containment - General)	-
4.10.4.1 and A.4.10 (Containment - General)	-
4.10.4.2 and A.4.10 (Platforms - Any platform intended for sitting or standing)	-
4.10.4.2 and A.4.10 (Containment walls with a minimum height )	-
4.10.4.2 and A.4.10 (Permanently roofed Containment walls)	-
4.10.4.3 and A.4.10 (Slopes shall be treated as a platform.)	-
4.10.4.3 and A.4.10 (The first metre at the top of slopes)	-
4.10.4.3 and A.4.10 (The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-
4.10.4.4 and A.4.10 (Safe collapse)	-
4.10.4.4 a and A.4.10 (When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-
4.10.4.4 b and A.4.10 (the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-
4.11.1 (Paddling pools - General)	-
4.11.2 (Edges, points, and small parts)	-
4.11.3 (Paddling pools with inflatable walls)	-
4.11.3 (Paddling pools with inflatable walls)	-
5.1 (Labelling)	-
5.2 (Assembly and installation instructions)	-
5.3 (Maintenance instructions)	-
5.4 (Warnings)	-

Partial

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.2-5.2 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.2(a)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-
4.2.2(b)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
4.5-5.5 (Soft-filled toys-rate of spread of flame )	-
4.5-5.5 (Soft-filled toys-Test for soft-filled toys )	-

Partial

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test)	-
4.2 - 5.24.3 ( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-
4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test)	-
4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-
4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms)	-
4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components)	-
4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-
4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test)	-
4.2 - 5.24.8.2 ( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-
4.2 - 5.24.8.3 ( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-
4.3.2 - 5.21 ( Expanding materials)	-
4.4.1 - 5.2 (Small parts-For children under 36 months)	-
4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months )	-
4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-
4.5.1.3 - 5.3 (Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-
4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-
4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test)	-
4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-
4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-
4.5.5 (Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-
4.5.6 (Shape, size and strength of certain toys-Balloons)	-
4.5.7 (Shape, size and strength of certain toys-Marbles)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-
4.5.8 - b (Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-
4.6.1 a - 5.8 (Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-
4.6.2 (Edges-Functional sharp edges)	-
4.6.3 - 5.8 (Edges-Edges on metal toys-Sharp edge test)	-
4.6.4 ( Edges-Edges on moulded toys)	-
4.6.5 ( Edges-Edges on exposed bolts or threaded rod)	-
4.7.1 - 5.9 (Points-Accessible sharp points-sharp-point test)	-
4.7.2 - a (Points-Functional sharp points)	-
4.7.3 (Wooden toys)	-
4.8.1 (Projections-General requirments)	-
4.9(a) - 5.24.8.2 ( Metal wires and rods-wires and other metallic components intended to be bent)	-
4.9(b) - 5.24.8.3 ( Metal wires and rods-wires likely to be bent)	-
4.9 - c ( Metal wires and rods)	-
4.9 - c - 5.8 ( Metal wires and rods-Sharp edge test)	-
4.9 - c - 5.9 ( Metal wires and rods-Sharp Point test)	-
4.9 - c ( Metal wires and rods-Spokes ends)	-
4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys-average thickness)	-
4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys- individual thickness)	-
4.11.2.1(a) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.2.1(b) - 5.11.3 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-
4.11.2.1(b) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-
4.11.2.2 - 5.11.2 ( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-
4.11.3.1(a) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.3.1(b) - 5.11.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-
4.11.3.1(b) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-
4.11.3.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-
4.11.4(a) - 5.11.4.1 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-
4.11.4(a) - 5.11.4.2 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-
4.11.4(b) - 5.11.3 (Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-
4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length)	-
4.11.7 - 5.11.1 (Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-
4.11.8 - 5.11.5 (Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-
4.11.9.1 (Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-
4.11.10 (Cords-Cords on toy bags)	-
4.12.1(a - 1) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 2) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 3) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-
4.12.1(a - 4) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 5) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.2 (a) - 5.22.3 (Folding mechanisms-Other toys with folding mechanisms)	-
4.12.3 (Folding mechanisms-Hinge line clearance)	-
4.12.2 (b) (Folding mechanisms-Other toys with folding mechanisms)	-
4.12.3 (Folding mechanisms-Hinge line clearance)	-
4.13.1 (Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-
4.13.3 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-
4.13.3 - 5.7 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-
4.13.4 (Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-
4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys)	-
4.14(a) (Springs)	-
4.14(b) (Springs)	-
4.14(c) (Springs)	-
4.15.1.1 - 5.12.2 ( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-
4.15.1.2 - 5.12.3 ( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-
4.15.1.3 - 5.12.4 ( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-
4.15.2 - 5.12.5 ( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-
4.15.3 - 5.12.6 ( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-
4.16.1 (Enclosures-Ventilation)	-
4.16.2.1 (Enclosures-Closures-Lids, doors and similar devices)	-
4.16.2.2(a) - 5.13.2.1 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-
4.16.2.2(b) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-
4.16.3 (Enclosures-Toys that enclose the head)	-
4.16.3 (Enclosures-Toys that enclose the head-No of openings)	-
4.17 - 5.14 (Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-
4.17 (Simulated protective equipment, such as helmets, hats and goggles)	-
4.18.2(a) - 5.36 (Projectile toys-Projectiles-tip assessment of rigid projectiles)	-
4.18.2(b) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles-Radius)	-
4.18.2(d) - 5.37 (Projectile toys-Projectiles-length of suction cup projectiles)	-
4.18.2(d) - 5.37 - 5.24.5 (Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-
4.18.2(d) - 5.37 - 5.24.6.5 (Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-
4.18.2 - e - 5.24.5 (Projectile toys-Projectiles-torque test)	-
4.18.2 - e - 5.24.6.5 (Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-
4.18.3(a) - 5.2 (Projectile toys-Projectile toys with stored energy-small parts test)	-
4.18.3(a) - 5.3 - 5.24 (Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-
4.18.3(a) - 5.4 (Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.18.3(c ) - 5.24.5 (Projectile toys-Projectile toys with stored energy-torque test)	-
4.18.3(c ) - 5.24.6.4 (Projectile toys-Projectile toys with stored energy- tension test for protective components)	-
4.18.3(d) - 5.15.2 (Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-
4.18.3(e ) (Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-
4.18.4.1 - 5.20 (Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-
4.18.4.2(a) - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-
4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-
4.18.4.3 - 5.15.2 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-
4.18.4.3(a) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.18.4.3(c) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.18.4.6 - 5.24.5 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-
4.18.4.6 - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-
4.19 (Rotors and propellers)	-
4.2 (Aquatic toys)	-
4.21(a) (Braking)	-
4.21(a) (Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-
4.21(a) (braking)	-
4.21(b) (braking)	-
4.22.1 (Toy bicycles-Instructions for use)	-
4.22.2 (Toy bicycles-Determination of maximum saddle height)	-
4.22.3 - 5.16.1 (Toy bicycles-Braking requirements-determination of free-wheeling facility)	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-
4.22.3 - 5.16.3 (Toy bicycles-Braking requirements- brake performance for toy bicycles)	-
4.23 - 5.17 (Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-
4.24(a) - 5.18 (Toys containing a heat source-determination of temperature increases)	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-
4.25 - 5.19 (Liquid-filled toys-leakage of liquid-filled toys)	-
4.25 (Liquid-filled toys)	-
4.26(a) - 5.2 ( Mouth-actuated toys-small parts test)	-
4.26(b) - 5.24.5 - 5.3 ( Mouth-actuated toys-small parts test after torque test)	-
4.26(b) - 5.24.6.1 - 5.4 ( Mouth-actuated toys-small parts test after tension test, general procedure)	-
4.26(c ) - 5.20 - 5.2 ( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-
4.27 (Toy roller skates, toy inline skates and toy skateboards)	-
4.28 ( Percussion caps specifically designed for use in toys)	-
4.29(a) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(b) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(c) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(d) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(e) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(f) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.29(g) - 5.25 (Acoustic requirements-determination of sound pressure levels)	-
4.30.2 (Toy scooters-Warnings and instructions for use)	-
4.30.3 - 5.26 - 5.8 (Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-
4.30.3 - 5.26 - 5.9 (Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-
4.30.3 - 5.26 (Toy scooters-Strength-static strength for toy scooters)	-
4.30.3 - 5.27 - 5.8 (Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-
4.30.3 - 5.27 - 5.9 (Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-
4.30.3 - 5.27 (Toy scooters-Strength-dynamic strength for toy scooters)	-
4.30.3 - 5.29 (Toy scooters-Strength-strength of toy scooter steering tubes)	-
4.30.4 - 5.12.2 (Toy scooters-Stability-sideways stability test, feet available for stabilization)	-
4.30.5(a) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(b) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(c) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(d) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(e) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(f) - 5.30 ( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-
4.30.6 ( Toy scooters-Braking)	-
4.30.6 - 5.28 ( Toy scooters-Braking- force required to hold the toy)	-
4.30.7 ( Toy scooters-Wheel size(diameter))	-
4.30.8 (Toy scooters-Projections)	-
4.30.8 (Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-
4.31 (Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-
4.31.1 - 5.32 (Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-
4.31.1 - 5.2 (Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-
4.31.2(b) - 5.34 - 5.2 (Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-
4.31.2(b) - 5.34 - 5.2 (Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2 (Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-
4.32 - 5.38.2 ( Yo-yo balls - length (lo) of the yo-yo ball tether)	-
4.33 - 5.11.3 (Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-
4.34 (Sledges and toboggans with cords for pulling)	-
4.35.3 - 5.39 (Jaw entrapment in handles and steering wheels-jaw entrapment test)	-
9873 (Part - 2) 4.5 - 5.5 (Soft-filled toys-rate of spread of flame )	-
9873 (Part - 2) 4.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
9873 (Part - 2) 4.4 - 5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
9873 (Part - 2) 4.5 - 5.5 (Soft-filled toys-Test for soft-filled toys )	-
9873 (Part - 2) 4.3 - 5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-
9873 (Part - 2) 4.3 - 5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
9873 (Part - 2) 4.3 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-
9873 (Part - 2) 4.4 - 5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
9873 (Part - 2) 4.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
9874 (Part - 4) 5.4 (Warnings)	-
9874 (Part - 4) 5.3 (Maintenance instructions)	-
9874 (Part - 4) 5.2 (Assembly and installation instructions)	-
9874 (Part - 4) 5.1 (Labelling)	-
9874 (Part - 4) 4.11.3 (Paddling pools with inflatable walls)	-
9874 (Part - 4) 4.11.3 (Paddling pools with inflatable walls)	-
9874 (Part - 4) 4.11.2 (Edges, points, and small parts)	-
9874 (Part - 4) 4.11.1 (Paddling pools - General)	-
9874 (Part - 4) 4.10.4.4 b and A.4.10 (the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-
9874 (Part - 4) 4.10.4.4 a and A.4.10 (When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-

Partial

-
-

IS 3062 (1995)

Crop protection equipment - Rocker sprayer - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(F-6) (Workmanship and Finish)	-
Cl. 6.5 (Other requiremnt)	-
(F-4) (Other requiremnt)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(Table 1 of IS 3652) (Material)	-
( F-11) (Type)	-
( F-11) (Marking)	-
( D - 4) (Other requirment)	-
( D - 3) (Dimensions)	-
(D-2 and Table 1 of IS3652) (Material)	-
(D-1) (Types)	-
(D-5) (Marking)	-
( C - 9 ) (ii) Leakage and Reliability test)	-
( C - 8 ) (Tests (C-7) i) Strength test)	-
( C - 6) (Operating Trigger/ Knob)	-
( C - 5 ) (Gaskets )	-
(C-4) (End Fittings i) Inlet ii) outlet)	-
( C - 2) (Dimensions)	-
Table 1 of IS 3652 ) (Material)	-
(C-10) (Types ( C-1 ))	-
(C-10) (Marking)	-
(Cl. 9.1) (MARKING)	-
(Cl.8) (Workmanship and Finish)	-
(Cl. 7) (Other requirements)	-
(Cl. 6.11) (Total Mass)	-
(Cl. 6.10) (Gaskets)	-
4.8.2 (c) test for hose connection)	-
4.8.2 (b) For cut- off device )	-
4.8.2 ( Hose Connections a) For delivery spout )	-
(Cl. 6.9 , 4.8.1 ) (Discharge Line, Delivery hose)	-
4.7.3 ( b) For Strainer Body)	-
4.7.3 ( Hose Connections a) For Suction spout)	-
4.7.2 ( Strainer Assembly a) stainer b) Stainer body)	-
(Cl. 6.8) & 4.7.1 (Suction Line, and suction hose)	-
4.6.2 ( Delivery Spout)	-
4.6.1 & 6.7 (Suction , delivery spout and suctionspout)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
4.4.4 ( Piston Rod)	-
4.4.4 ( Piston Rod)	-
4.4.3 (Piston Spreaded)	-
4.4.2 ( Piston)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.2 (Frame)	-
Cl. 6.1 (Construction Requirment , base board)	-
Cl. 5.3 (Endurance Test)	-
Cl. 5.2 (Volumetric Efficiency)	-
5 & 5.1 (Performance requirement, Discharge rate)	-

Complete

-
-

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (VALVE END CONNECTIONS)	-
5.0 (SERVICE APPLICATIONS)	-
6.0 ( NOMINAL SIZES )	-
7.0 (NOMINAL PRESSURES)	-
7.2 (Class designations)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-
11.0 (Bodies)	-
12.0 (DISC AND SHAFT)	-
13.0 (SEATING AND LININGS)	-
14.3 (BEARINGS)	-
16.0 (OPERATION)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-

Partial

-
-

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
29.0 (Resistance to Rusting)	-
28.2 (Resistance to Tracking)	-
28.1.1 (Glow-Wire Test )	-
27.3 (Creepage distances, clearances and distances through sealing compound )	-
27.2 (Creepage distances, clearances and distances through sealing compound )	-
27.1 (Creepage distances, clearances and distances through sealing compound )	-
26.7 (Screws, current carrying parts and connections)	-
26.2 (Screws, current carrying parts and connections)	-
26.1 (Screws, current carrying parts and connections)	-
25.4 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.1 (Resistance to heat)	-
25.1 (Resistance to heat)	-
24.14.2 (f)Verification of the Removal of Covers or Cover-Plates )	-
24.14.1 (e)Verification of the Non-removal of Covers or Cover-Plates )	-
24.8 (c) For shuttered socket-outlets )	-
24.6 (b) For screwed glands of accessories other than ordinary)	-
24.3 (a) For surface type socket outlet)	-
24.1 (a) Mechanical Strength )	-
22.2 (Verification of Minimum withdrawal force)	-
22.1 (Verification of Max withdrawal force)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
20.0 (Making & Breaking Capacity)	-
19.0 (Temperature Rise )	-
18.0 (Operation of Earthing Contacts)	-
17.2 ( Electric Strength)	-
17.1 (Insulation Resistance)	-
16.3 (Resistance to humidity)	-
16.2 (Resistance to Harmful Ingress of Water)	-
16.1 (Resistance to Ageing )	-
15.0 (Interlocked socket-outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
12.2.11 (Terminals)	-
12.2.10 (Terminals)	-
12.2.9 (Terminals)	-
12.2.7 (Terminals)	-
12.2.5 (Terminals)	-
12.2.4 (Terminals)	-
12.2.3 (Terminals)	-
12.2.2 (Terminals)	-
12.2.1 (Terminals)	-
12.1 (Terminals)	-
11.5 (Provision for Earthing)	-
11.2 (Provision for Earthing)	-
11.1 (Provision for Earthing)	-
10.6 (Protection against Electric Shock)	-
10.5 (Protection against Electric Shock)	-
10.3 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (Checking of dimensions)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
6.0 (Ratings)	-
6.0 (Ratings)	-
30.4 (Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-
30.3 (Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-
30.2 (Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-
30.1 (Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-
28.1.2 (Addiitional tests for plugs with pins provided with insulating sleeves)	-
24.18 (Verification of the Removal of Covers or Cover-Plates )	-
24.17 (Verification of the Removal of Covers or Cover-Plates )	-
24.16 (Verification of the Removal of Covers or Cover-Plates )	-
24.15 (Verification of the Removal of Covers or Cover-Plates )	-
24.13 (For portable socket outlets having means for suspension on a wall)	-
24.12 (For portable socket outlets having means for suspension on a wall)	-
24.11 (For portable socket outlets having means for suspension on a wall)	-
24.1 (For plugs)	-
24.9 (For portable multiple and combined socket outlets)	-
24.7 (For plug pins provided with insulating sleeves)	-
24.5 (For Portable single socket outlets/ plugs)	-
24.4 (For Portable socket outlets/ plugs)	-
24.2 (For Portable single socket outlets/ plugs)	-
23.4 (Flexible cables & their connection )	-
23.3 (Flexible cables & their connection )	-
23.2 (Flexible cables & their connection )	-
23.1 (Flexible cables & their connection )	-
14.15 (Construction of Plugs & Portables socket outlet )	-
14.11 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.8 (Construction of Plugs & Portables socket outlet )	-
14.7 (Construction of Plugs & Portables socket outlet )	-
14.3 (Construction of Plugs & Portables socket outlet )	-
14.2 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
12.1 (Terminals)	-
10.4 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
8 (Marking)	-

Partial

-
-

IS 15757 (2007)

Follow-up formula - Complementary foods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.7 (Flavour and Odour)	-
5.8.1 (Bacterial Count )	-
5.8.2 (Coliform Count )	-
5.8.3 (Escherichia Coli )	-
5.8.4 (Staphylococcus Aureus )	-
5.8.5 (Salmonella and Shigella )	-
Table 1 (i) (Moisture)	-
Table 1 (ii) (Total milk protein)	-
Table 1 (iii) (Total fat)	-
Table 1 (iv) (Total ash (Annex B of IS 14433))	-
Table 1 (v) (Acid insoluble ash (Annex B of IS 14433))	-

Partial

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-
4.2 ( Description)	-

Complete

-
-

IS 2558 (1994)

Ponceau 4R, food grade - Specification (Second Revision)

- View breakup
Rs. 8008/- excluding chlorides, dye intermediates and lead.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1 Clause-3.1 SI.no (i) Annex-A (Total dye content corrected for sample dried at 105 ± 1°C for 2 h )	-
Table-1 Clause-3.1 SI.no (ii) IS-1699 :1994 CL-6 (Loss on drying at 135 °C )	-
Table-1 Clause-3.1 SI.no (iii) IS 1699:1994 CL-7 (Water-i nsoluble matter, percent by mass, Max)	-
Table-1 Clause-3.1 SI-no.(iv) IS-1699 CL-8 (Combined ether extracts percent by mass,Max)	-
Table-1 Clause-3.1 SI-no.(v) Annex-B (Subsidiary dyes, percent by mass,Max)	-
Table-1 Clause-3.1 SI-no ( vii) IS-1699 CL 15 (Arsenic mg/kg)	-
Table-1 Clause-3.1 SI-no.(viii) IS-1699 CL 16 (Heavy Metals mg/kg)	-

Partial

-
-

IS 1 (1968)

Specification for the national flag of India (Cotton khadi) (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (FLAG)	-
4.3 a IS 1803 (Asoka Chakra)	-
4.3 b IS 1804 (Asoka Chakra)	-
4.3.1 Table 6 Fig. 4. (J)	-
4.3.1 Table 6 Fig. 4. (K)	-
4.3.1 Table 6 Fig. 4. (L)	-
4.3.1 Table 6 Fig. 4. (N)	-
3.5,3.5.1 (Wooden Toggles)	-
4,4.1 Table 5 Fig. 2 & 3 (A)	-
4,4.1 Table 5 Fig. 2 & 3 (B)	-
4,4.1 Table 5 Fig. 2 & 3 (C)	-
4,4.1 Table 5 Fig. 2 & 3 (D)	-
4,4.1 Table 5 Fig. 2 & 3 (E)	-
4,4.1 Table 5 Fig. 2 & 3 ( Dimension of Hemp Cordage and Loop L)	-
4,4.1 Table 5 Fig. 2 & 3 (M)	-
4,4.1 Table 5 Fig. 2 & 3 (N)	-
3.5.2 Table 5 Fig.1 (Wooden Toggle P)	-
5,5.1 a (Constructions)	-
5,5.1 b (The number of stitches shall not be less than 4 per cm)	-
5.2 (Depth of Lapped seam 10 mm ± 2 mm)	-
5.3 (Reinforcements -)	-
5.4 ( Sleeve)	-
5.5 (Hemp cordage)	-
5.5.1 (Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-
5.6 (Toggle)	-

Partial

-
-

IS 4752 (1994)

Sodium metabisulphite, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Water insoluble matter)	-
3.4 Table 1 (Thiosulphate)	-
3.4 Table 1 (Arsenic)	-
3.4 Table 1 (Iron)	-
3.4 Table 1 (Heavy metals)	-
3.4 Table 1 (Selenium)	-
3.4 Table 1 (Purity, as SO2)	-
3.4 Table 1 (Purity, as Na2S2O5)	-
3.1 (Description)	-
3.2 (Identification test)	-
3.4 Table 1 (pH)	-

Partial

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List