BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List

Reset

274 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Diameter & Out Of Roundness)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SILICON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (MANGANESE)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (PHOSPHURS)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SULPHUR)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( CARBON)	-

Partial

-
-

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Workmanship)	-
Cl 9.1 & Table 3 (Diameter & Out Of Round)	-
Cl 10 (UTM)	-
Cl 10 (UTM)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Silicon)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Manganese)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Phosphorous)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Sulphor)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Carbon)	-

Partial

-
-

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, 6.2 (phosphorus)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (carbon)	-
Cl 7 (Workmanship)	-
Cl 8 (Diameter, Ovality & Weight)	-
9.1, table 2 (Tensile Strength)	-
9.1, table 2 (Yield Strength)	-
9.1, table 2 (Elongation)	-
9.2, table 2 (hardness test)	-
12.2 (Bend Test)	-

Partial

-
-

IS 4109 (1967)

Specification for kadahies

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (a) Round Shape / Bowl Shape)	-
3 (b) Nominal dia. at top D1 mm)	-
3 (c) Nominal overall Height H1 mm)	-
3 (d) Thickness at bottom mm Min)	-
4 (Manufacture and Workmanship)	-
6 (Test)	-

Partial

-
-

IS 2802 (1964)

Specification for ice-cream

- View breakup
Rs 7670/- excluding Phosphatase test of mix

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Coliform Count)	-
4.1 Table 1 (Total Colony Count)	-
4.1 Table 1 (Acidity percent, ice cream only)	-
4.1 Table 1 (Milk Fat, ice cream)	-
4.1 Table 1 (Sucrose, all types)	-
4.1 Table 1 (Total Solids)	-
4.1 Table 1 (weight in gram, ice cream)	-
3.1 (Odour and Flavour)	-
3.2 (Texture and Appearance)	-
3.3 (Freedom from Dirt)	-

Partial

-
-

IS 6406 (1994)

Brilliant blue FCF, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (Water-insoluble matter)	-
3.1 Table 1 (Combined ether extracts)	-
3.1 Table 1 (Subsidiary dyes)	-
3.1 Table 1 (Heavy metals - Arsenic)	-
3.1 Table 1 (Total dye content)	-

Partial

-
-

IS 4447 (1994)

Sodium benzoate, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Moisture)	-
3.3 Table 1 (Arsenic )	-
3.3 Table 1 (Heavy Metals)	-
3.3 Table 1 (Melting range of benzoic acid)	-
3.3 Table 1 (Purity,expressed as C7H602)	-
3.1 (Description)	-
3.2.1 (Reaction with Ferric Chloride)	-
3.2.2.1 (Test for Sodium - Reaction with uranylzinc acetate)	-
3.2.2.2 (Test for Sodium - Flame test)	-
3.3 Table 1 (Acidity or alkalinity)	-
3.3 Table 1 (Readily carbonizable substancances)	-
3.3 Table 1 (Readily oxidizable substancances)	-
3.3 Table 1 (Chlorinated organic compounds)	-

Partial

-
-

IS 4448 (1994)

Benzoic acid, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Sulphated ash)	-
3.3 Table 1 (Loss on drying)	-
3.3 Table 1 (Arsenic )	-
3.3 Table 1 (Heavy Metals)	-
3.3 Table 1 (Purity,expressed as C7H602)	-
3.1 (Description)	-
3.2.1 (Reaction with Ferric Chloride)	-
3.3 Table 1 (Readily carbonizable substancances)	-
3.3 Table 1 (Readily oxidizable substancances)	-
3.3 Table 1 (Chlorinated organic compounds)	-

Partial

-
-

IS 2923 (1995)

Carmoisine, food grade - Specification (Second Revision)

- View breakup
Rs 6835/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (Water-insoluble matter)	-
3.1 Table 1 (Combined ether extracts)	-
3.1 Table 1 (Subsidiary dyes)	-
3.1 Table 1 (Arsenic)	-
3.1 Table 1 (Loss on drying at 135 C)	-
3.1 Table 1 (Heavy metals)	-
3.1 Table 1 (Total dye content,)	-

Partial

-
-

100

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Colour and Pattern)	-
5.2 (Surface Finish)	-
5.3 ,Table 5 (Thickness)	-
5.4 (Appearance )	-
5.2.2 (Sports, dirt and similar surface defects)	-
5.4.7,Fig. 2 (Staightness of Edges)	-
5.4.6 (Length and width of a full size Laminate)	-
5.4.6 (Length and width of a full size Laminate)	-
5.4.7,Fig. 2 (Staightness of Edges)	-
5.2.2 (Broken Corners )	-
7.2 a) (Marking)	-
7.2 b) (Marking)	-
7.2 c) (Marking)	-
7.2 d) (Marking)	-
7.2.1 (Marking)	-
5.5, Tables 7, Sr No.(i) Annex C (Resistance to Surface wear)	-
5.5, Tables 7, Sr No.(ii) Annex D (Resistance to immersin in boiling water)	-
5.5, Tables 7, Sr No.(iii) Annex E (Resistance to Dry heat at 180 °C)	-
5.5, Tables 7, Sr No.(iv) Annex F (Dimensional Stability at deviated Temperature)	-
5.5, Tables 7, Sr No.(v) Annex G (Dimensional Stability at 20°C)	-
5.5, Tables 7, Sr No.(vi) Annex G (Resistance to impact by small diameter ball)	-
5.5, Tables 7, Sr No.(vii) Annex J (Resistance to impact by large diameter balls (self supporting compact laminates))	-
5.5, Tables 7, Sr No.(viii) Annex K (Resistance to cracking (thin laminates))	-
5.5, Tables 7, Sr No.(ix) Annex B & E (Resistance to scratching)	-
5.5, Tables 7, Sr No.(i) Annex C (Resistance to Surface wear)	-

Partial

-
-

101

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Finish and workmanship)	-
6 (Branch pipe)	-
6.3 (Hydraulic test requirement)	-
7.3 (Hydraulic test requirement)	-
5.3 (Size and Dimension )	-
3 (Finish and workmanship)	-

Partial

-
-

102

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-
7, 6.1.1 (SILICON)	-

Partial

-
-

103

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-

Partial

-
-

104

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-

Partial

-
-

105

IS 12299 (1998)

Dairy whitener - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Description)	-
5.3 (Flavour and Taste)	-
5.5.1 (Bacterial Count)	-
5.5.2 (Coliform Count)	-
5.5.2 (E Coli)	-
5.5.2 (Staphylococcus aureus)	-
5.5.3 (Salmonella)	-
5.6 Table 1 i) (Moisture)	-
5.6 Table 1 ii) (Milk Solids (non-fat))	-
5.6 Table 1 iii) (Insolubility Index)	-
5.6 Table 1 iv) (Total Ash (on dry basis))	-
5.6 Table 1 v) (Milk Fat)	-
5.6 Table 1 vi) (Acid Insoluble ash)	-
5.6 Table 1 vii) (Total added sugar)	-

Complete

-
-

106

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-

Partial

-
-

107

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Particle Size)	-
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Arsenic(as As))	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Lead as (Pb))	-

Partial

-
-

108

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 12 (Sudden Load Applied)	-
Cl 11.3 (Press)	-
Cl 10.3 (UTM)	-
Clause - 5, 8.1 & 8.2 (E650, SILICON)	-
Clause - 5, 8.1 & 8.2 (E650 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E650, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E650, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E550, CARBON)	-
Clause - 5, 8.1 & 8.2 (E550, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E600, SILICON)	-
Clause - 5, 8.1 & 8.2 (E600 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E600, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E600, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E600, CARBON)	-
Clause - 5, 8.1 & 8.2 (E550, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E550, SILICON)	-
Clause - 5, 8.1 & 8.2 (E550 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E550, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E600, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E550, CARBON)	-
Clause - 5, 8.1 & 8.2 (E450, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E450, SILICON)	-
Clause - 5, 8.1 & 8.2 (E450 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E450, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E450, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E450, CARBON)	-
Clause - 5, 8.1 & 8.2 (E410, SILICON)	-
Clause - 5, 8.1 & 8.2 (E410 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E410, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E410, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON)	-
Clause - 5, 8.1 & 8.2 (E350, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E350, SILICON)	-
Clause - 5, 8.1 & 8.2 (E350 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E350, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E350, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E350, CARBON)	-
Clause - 5, 8.1 & 8.2 (E300, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E300, SILICON)	-
Clause - 5, 8.1 & 8.2 (E300 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E300, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E300, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E275, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E275, SILICON)	-
Clause - 5, 8.1 & 8.2 (E275 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E275, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E450, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON)	-
Clause - 5, 8.1 & 8.2 (E250, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E250, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E250 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E250, SILICON)	-

Partial

-
-

109

IS 7532 (2018)

Soft soap - Specification (First RevisIon)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 5 ( 5.1) (The material shall be homogeneous translucent mass of jelly-like texture, free from putrescent, fishy or objectionable odour. It applies to soft soap with potassium or sodium base or a mixture of these bases. It does not apply to soaps for medicinal purposes. It may or may not be suitably perfumed subject to agreement between the purchaser and the supplier. It shall be free from foreign matter and visible impurities)	-
5.2 (5.2 The material shall quickly form a satisfactory lather while in use and shall show no sign of any deterioration on storage in original sealed containers under normal conditions for a period of 12 months.)	-
5.4 (Soft soap is liable to lose moisture on keeping. The results obtained for unsaponified and unsaponifiable matter, total free alkali and free caustic alkali by the specific methods of analysis shall, therefore, be recalculated in relation to the specified minimum total fatty matter by means of the equation: Recalculated result = Minimum specified total fatty matter content Actualresult× Actual total fatty matter conten)	-
Table-1 (i) IS.no 286 (Total Fatty Matter ( Type 1 ))	-
Table1(ii) IS.no 286 CL12 (Unsaponified and Unsaponified matter (Type 2 ))	-
Table-1 (iii) IS.no 286 CL 14 (Rosin acids percent by mass of total fatty matter ( Type 1))	-
Table-1 (iv) IS.no 286 Annex A (Total free alkali ( as K2O ) type 1)	-
Table-1 (v) IS.no 286 CL 6 ( see note ) (Free Caustic alkali ( as K2O) type 1)	-

Complete

-
-

110

IS 14542 (1998)

Partly skimmed milk powder specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1(i) (Moisture Type I (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type I (IS 11623))	-
Table 1(iii) (Milk fat, Type I (IS I1722))	-
Table 1(iv) (Insolubility index, a) Roller dried Type I (IS 12759))	-
Table 1(v) (Total ash Type I (Annex B of IS 14433 - Part 1))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type I (IS 11766))	-
Cl 6.4 (Flavour and Taste (IS 10030))	-
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

Complete

-
-

111

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3-Table 1- i (Moisture)	-
4.3-Table 1- ii (Total protein (N × 6.25) (on dry basis),)	-
4.3-Table 1- iii (Total fat (on dry basis))	-
4.3-Table 1- iv (Total ash (on dry basis))	-
4.3-Table 1- v (Acid insoluble ash (on dry basis) (in dilute HCl))	-
4.3-Table 1- vi (Solubility)	-
4.3-Table 1- viii (Test for starch)	-
4.3-Table 1- ix (Bacterial count)	-
4.3-Table 1- x (Coliform count)	-
4.3-Table 1- xi (E. coli)	-
4.3-Table 1- xii (Yeast and mould count)	-
4.3-Table 1- xiii (Salmonella)	-
4.3-Table 1- xiv (Shigella)	-
4.3-Table 1- xv (Vibrio cholerae )	-
4.3-Table 1- xv ( V. parahaemolyticus)	-
4.3-Table 1- xvi (Faecal streptococci )	-
4.3-Table 1- xvi ( Staphylococcusaureas)	-

Complete

-
-

112

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & 9 (Diameter)	-

Partial

-
-

113

IS 1698 (1994)

Indigo carmine, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- v (Subsidiary dyes)	-
3.1-Table 1- viii (Arsenic)	-
3.1-Table 1- ix (Heavy Metals)	-

Partial

-
-

114

IS 1697 (1994)

Erythrosine, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Contaminants)	-
3.1-Table 1- vi (Subsidiary colouring matters except fluorescein)	-
3.1-Table 1-x (Arsenic)	-
3.2 (Contaminants)	-

Partial

-
-

115

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

116

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

- View breakup
Rs.4500/- Excluding Macro examination and Sulphur print test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

117

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

- View breakup
Rs. 5250/- Excluding Macro examination and Sulphur print test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

Partial

-
-

118

IS 1695 (2014)

Sunset yellow, FCF, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- x (Arsenic)	-
3.1-Table 1-xi (Heavy Metals)	-
3.3 (Test for Colour)	-

Partial

-
-

119

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

- View breakup
Rs 3000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3.1 (Appearance)	-
3.3.2 (Odour and Flavour)	-
3.3.3 (Texture and Consistency)	-
3.3.4- Table 1-i (Moisture- Annex A)	-
3.3.4- Table 1-ii (Milk fat ( on dry basis)- Annex B)	-
3.3.4- Table 1-iii (Salt ( added sodium chloride)- Annex C)	-

Complete

-
-

120

IS 1694 (1994)

Tartrazine, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- v (Subsidiary dyes)	-
3.1-Table 1- viii (Arsenic)	-
3.1-Table 1-xi (Heavy Metals)	-

Partial

-
-

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List