BIS - LIMS (Laboratory Information Management System)

bureau veritas consumer products services india private limited

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8800198061 [email protected]

Scope List

Reset

15 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		N/A
5.2(Message Readability)	-	15000		N/A

Complete

-
-

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	1200	-
4.1.2 and A.4.1.2(Maximum height)	-	1200	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	1200	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	1200	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	1200	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	1200	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	1200	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	1200	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	1200	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	1200	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	1200	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	1200	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	1200	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	1200	-
4.3(Rung ladders, stepladders and stairways)	-	1200	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	1200	-
4.3 c(The surface of the tread shall not be slippery)	-	1200	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	1200	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	1200	-
4.3 f(The inclination of stairways)	-	1200	-
4.3 f(The inclination of stepladders)	-	1200	-
4.3 f(The inclination of rung ladders)	-	1200	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	1200	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	1200	-
4.4.1 (Head and neck entrapment)	-	1200	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	1200	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	1200	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	1200	-
4.6.1 and A.4.6.(Stability of slides)	-	1200	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	1200	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	1200	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	1200	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	1200	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	1200	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	1200	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	1200	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	1200	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	1200	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	1200	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	1200	-
4.6.4 and A.4.6.(Roller slides)	-	1200	-
4.6.4 and A.4.6.(Roller slides)	-	1200	-
4.6.4 and A.4.6.(Roller slides)	-	1200	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	1200	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	1200	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	1200	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	1200	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	1200	-
4.7.3.1(Swings intended for children under 36 months)	-	1200	-
4.7.3.1(Swings intended for children under 36 months)	-	1200	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	1200	-
4.7.5(Free swinging elements)	-	1200	-
4.7.5(Elements excluding free swinging)	-	1200	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	1200	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	1200	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	1200	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	1200	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	1200	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	1200	-
4.9(Carousels and rocking toys)	-	1200	-
4.9(Carousels and rocking toys)	-	1200	-
4.9(Free height of fall for carousels and rocking toys)	-	1200	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	1200	-
4.11.1(Paddling pools - General)	-	1200	-
4.11.2(Edges, points, and small parts)	-	1200	-
4.11.2(Edges, points, and small parts)	-	1200	-
4.11.3(Paddling pools with inflatable walls)	-	1200	-
4.11.3(Paddling pools with inflatable walls)	-	1200	-
5.1(Labelling)	-	1200	-
5.2(Assembly and installation instructions)	-	1200	-
5.3(Maintenance instructions)	-	1200	-
5.4(Warnings)	-	1200	-

Complete

-
-

IS 15644 (2006)

Safety of electric toys

38250 View breakup
Rs.9000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	250	N/A
8.0(Power Input)	-	1000	N/A
9.0(Heating and abnormal operation)	-	2500	N/A
10.0(Electrical strength at operating temperature)	-	2500	N/A
11.1(Moisture resistance)	-	5000	N/A
11.2(Resistant to humidity)	-	5000	N/A
12.0(Electric strength at room temperature)	-	2500	N/A
13.0(Mechanical strength)	-	1000	N/A
14.1(Construction)	-	250	N/A
14.2(Construction)	-	250	N/A
14.3(Construction)	-	250	N/A
14.4(Construction)	-	250	N/A
14.5(Construction)	-	250	N/A
14.6(Construction)	-	250	N/A
14.7(Construction)	-	250	N/A
14.8(Construction)	-	250	N/A
14.9(Construction)	-	250	N/A
14.1(Construction)	-	250	N/A
14.11(Construction)	-	250	N/A
14.12(Construction)	-	250	N/A
14.13(Construction)	-	250	N/A
14.14(Construction)	-	250	N/A
15.1(Protection of cords and wires)	-	500	N/A
15.2(Protection of cords and wires)	-	500	N/A
16.0(Components)	-	250	N/A
17 Table-1(Screws and connections)	-	250	N/A
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	N/A
18.0(Clearance and creepage distance)	-	500	N/A
19.1(Ball pressure test IEC 60695-10-2)	-	2500	N/A
19.2.1(Glow wire test IEC 60695-2-11)	-	5000	N/A
19.2.2(Needle flame test)	-	5000	N/A
20.0(Radiation, toxicity and similar hazards)	-	250	N/A

Complete

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

80000 View breakup
Rs.80,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	N/A
5(Classification of Luminaires')	-	2500	N/A
6.0(Marking)	-	2500	N/A
7.0(Construction)	-	40000	N/A
8.0(Creepage Distance and Clearances)	-	2500	N/A
9.0(Provision for earthing)	-	3500	N/A
10.0(Terminals)	-	15000	N/A
11.0(External & Internal Wiring)	-	11000	N/A
12.0(Protection against electric shock)	-	5000	N/A
13.0(Endurance Tests and Thermal Tests)	-	18000	N/A
14.0(Resistance to Dust & Moisture)	-	17000	N/A
15.0(Insulation Resistance and Electric Strength)	-	23000	N/A
16.0(Resistance to Heat , fire and tracking)	-	23000	N/A

Complete

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

80000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.80,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	15% discount to BIS
8(Protection against accidental contact with live parts)	-	20000	15% discount to BIS
9(Terminals)	-	121000	15% discount to BIS
10(PROVISION FOR EARTHING)	-	3000	15% discount to BIS
11(MOISTURE RESISTANCE)	-	10000	15% discount to BIS
12(Electric Strength)	-	1000	15% discount to BIS
14(Fault conditions)	-	5000	15% discount to BIS
15(Transformer heating)	-	15000	15% discount to BIS
17(Creepage distance and clearances)	-	5000	15% discount to BIS
18(Screws, current carrying parts and connections)	-	5000	15% discount to BIS
19(Resistance to heat, fire and tracking)	-	50000	15% discount to BIS
20(Resistance to corrosion)	-	5000	15% discount to BIS
16(Construction)	-	10000	15% discount to BIS

Complete

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

63500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2500	15 % discount to BIS
6(Interchangeability)	-	5000	15 % discount to BIS
7(Protection against accidental contact with live parts)	-	4000	15 % discount to BIS
8(Insulation Resistance and Electric Strength)	-	19500	15 % discount to BIS
9(MECHANICAL STRENGTH)	-	10000	15 % discount to BIS
10(cap temperature)	-	10000	15 % discount to BIS
11(Resistance to Heat)	-	6500	15 % discount to BIS
12(Resistance to Flame and Ignition)	-	5500	15 % discount to BIS
13(Fault conditions)	-	12000	15 % discount to BIS
14(Creepage distance and clearances)	-	2500	15 % discount to BIS

Complete

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2500	N/A
7(Marking and instructions)	-	2500	N/A
8(Protection against live parts)	-	2500	N/A
10(POWER INPUT AND CURRENT)	-	3500	N/A
11(HEATING)	-	8500	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	7000	N/A
14(IMPULSE VOLTAGE TEST)	-	5500	N/A
15(HUMIDITY TREATMENT TEST)	-	35000	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	7000	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	8500	N/A
18(ENDURANCE)	-	60000	N/A
19(ABNORMAL OPERATION)	-	14000	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	N/A
21(MECHANICAL STRENGTH)	-	33500	N/A
22(CONSTRUCTION)	-	8500	N/A
23(INTERNAL WIRING)	-	2500	N/A
24(COMPONENTS)	-	2500	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	8500	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	N/A
27(PROVISION FOR EARTHING)	-	3500	N/A
28(SCREWS AND CONNECTIONS)	-	2500	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3500	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	17500	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	5500	N/A

Complete

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

80000 View breakup
Rs.80000/- For UPS/ Inverters below 5 KVA [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	5000	N/A
4.5(Components)	-	5000	N/A
4.5(Components)	-	5000	N/A
4.6(Power interface)	-	5000	N/A
4.6(Power interface)	-	5000	N/A
4.7(Marking & instructions)	-	2500	N/A
4.7(Marking & instructions)	-	2500	N/A
4.7(Marking & instructions)	-	2500	N/A
5.1(Protection against shock and energy hazards)	-	8500	N/A
5.1(Protection against shock and energy hazards)	-	8500	N/A
5.2(Requirement of auxiliary circuits)	-	2000	N/A
5.2(Requirement of auxiliary circuits)	-	2000	N/A
5.3(Protective earthing and bonding)	-	8500	N/A
5.3(Protective earthing and bonding)	-	8500	N/A
5.3(Protective earthing and bonding)	-	8500	N/A
5.4(AC and DC power isolation)	-	2000	N/A
5.4(AC and DC power isolation)	-	2000	N/A
5.4(AC and DC power isolation)	-	2000	N/A
5.5(Over current and earth fault condition)	-	5000	N/A
5.5(Over current and earth fault condition)	-	5000	N/A
5.5(Over current and earth fault condition)	-	5000	N/A
5.6(Safety interlocks)	-	2000	N/A
5.6(Safety interlocks)	-	2000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	N/A
6.1(Wiring, connections and supply)	-	2500	N/A
6.1(Wiring, connections and supply)	-	2500	N/A
6.2(Connection to power)	-	2500	N/A
6.3(Wiring terminals for external power conductors)	-	2500	N/A
6.3(Wiring terminals for external power conductors)	-	2500	N/A
7.1(Enclosure)	-	5000	N/A
7.1(Enclosure)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.4(Construction details)	-	2000	N/A
7.4(Construction details)	-	2000	N/A
7.4(Construction details)	-	2000	N/A
7.5(Resistance to fire)	-	10000	N/A
7.6(Battery location)	-	2000	N/A
8.1(General procision for earth leakage)	-	5000	N/A
8.2(Electric Strength)	-	5000	N/A
8.3(Abnormal operating and fault conditions)	-	8500	N/A
9.0(Connection to telecommunication networks)	-	8500	N/A

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	500	N/A
6(Hazardous radiations)	-	250	N/A
7(Heating under normal operating conditions)	-	5000	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	5000	N/A
9(Electric shock hazard under normal operating conditions)	-	5000	N/A
10(Insulation requirements)	-	15000	N/A
11(Fault conditions)	-	15000	N/A
12(Mechanical strength)	-	5000	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	N/A
14(Components)	-	2000	N/A
15(TERMINALS)	-	2500	N/A
16(External flexible cords)	-	2500	N/A
17(Electrical connections and mechanical fixings)	-	5000	N/A
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	5000	N/A
19(Stability and mechanical hazards)	-	5000	N/A
20(Resistance to fire)	-	15000	N/A

Complete

-
-

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

166000 View breakup
Cell: Rs.1,66,000/- Battery : Rs.1,15,000/- [15% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	250	For Cell and Battery testing charges depend upon applicability
5(General Safety Considerations)	-	250	For Cell and Battery testing charges depend upon applicability
5.1(General)	-	250	For Cell and Battery testing charges depend upon applicability
5.2(Insulation and Wiring)	-	2500	For Cell and Battery testing charges depend upon applicability
5.3(Venting)	-	250	For Cell and Battery testing charges depend upon applicability
5.4(Temperature, Voltage and Current Management)	-	250	For Cell and Battery testing charges depend upon applicability
5.5(Terminal Contacts)	-	250	For Cell and Battery testing charges depend upon applicability
5.6(Assembly of Cells into batteries)	-	250	For Cell and Battery testing charges depend upon applicability
5.7(Quality Plan)	-	250	For Cell and Battery testing charges depend upon applicability
6(Tyoe Test amd Sample Size)	-	250	For Cell and Battery testing charges depend upon applicability
7(Specific requirements and tests)	-	250	For Cell and Battery testing charges depend upon applicability
7.1(Charging procedure for test purposes)	-	20000	For Cell and Battery testing charges depend upon applicability
7.2(Intended Use)	-	50000	For Cell and Battery testing charges depend upon applicability
7.3(Reasonably foreseeable misuse)	-	80000	For Cell and Battery testing charges depend upon applicability
8(Information for safety)	-	250	For Cell and Battery testing charges depend upon applicability
8.1(General)	-	250	For Cell and Battery testing charges depend upon applicability
8.2(Small Cell and battery safety information)	-	1000	For Cell and Battery testing charges depend upon applicability
9(Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.1(Cell Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.2(Battery Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.3(Caution for ingestion of small cells and batteries)	-	250	For Cell and Battery testing charges depend upon applicability
9.4(Other information)	-	250	For Cell and Battery testing charges depend upon applicability
10(Packaging)	-	1000	For Cell and Battery testing charges depend upon applicability

Complete

-
-

IS 16046 : Part 2 (2018)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	250	For Cell and Battery testing charges depend upon applicability
5(General Safety Considerations)	-	250	For Cell and Battery testing charges depend upon applicability
5.1(General)	-	250	For Cell and Battery testing charges depend upon applicability
5.2(Insulation and Wiring)	-	2500	For Cell and Battery testing charges depend upon applicability
5.3(Venting)	-	250	For Cell and Battery testing charges depend upon applicability
5.4(Temperature, Voltage and Current Management)	-	250	For Cell and Battery testing charges depend upon applicability
5.5(Terminal Contacts)	-	250	For Cell and Battery testing charges depend upon applicability
5.6(Assembly of Cells into batteries)	-	250	For Cell and Battery testing charges depend upon applicability
5.7(Quality Plan)	-	250	For Cell and Battery testing charges depend upon applicability
5.8(Battery Safety Components)	-	250	For Cell and Battery testing charges depend upon applicability
6(Tyoe Test amd Sample Size)	-	2500	For Cell and Battery testing charges depend upon applicability
7(Specific requirements and tests)	-	250	For Cell and Battery testing charges depend upon applicability
7.1(Charging procedure for test purposes)	-	20000	For Cell and Battery testing charges depend upon applicability
7.2(Intended Use)	-	10000	For Cell and Battery testing charges depend upon applicability
7.3(Reasonably foreseeable misuse)	-	70000	For Cell and Battery testing charges depend upon applicability
8(Information for safety)	-	250	For Cell and Battery testing charges depend upon applicability
8.1(General)	-	250	For Cell and Battery testing charges depend upon applicability
8.2(Small Cell and battery safety information)	-	1000	For Cell and Battery testing charges depend upon applicability
9(Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.1(Cell Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.2(Battery Marking)	-	250	For Cell and Battery testing charges depend upon applicability
9.3(Caution for ingestion of small cells and batteries)	-	250	For Cell and Battery testing charges depend upon applicability
9.4(Other information)	-	250	For Cell and Battery testing charges depend upon applicability
10(Packaging)	-	1000	For Cell and Battery testing charges depend upon applicability

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

93975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2500	N/A
1.6(Power interface .)	-	2500	N/A
1.7(Markings and instructions)	-	2500	N/A
2.1(Protection from electric shock and energy hazards)	-	7500	N/A
2.2(SELV circuits)	-	2500	N/A
2.3(TNV circuits)	-	2500	N/A
2.4(Limited current circuits)	-	2500	N/A
2.5(Limited power sources .)	-	3500	N/A
2.6(Provisions for earthing and bonding)	-	3500	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	N/A
2.8(Safety interlocks)	-	2500	N/A
2.9(Electrical insulation)	-	16000	N/A
2.10(Clearances, creepage distances and distances through insulation)	-	13000	N/A
3.1(General)	-	2500	N/A
3.2(Connection to a mains supply)	-	2500	N/A
3.3(Wiring terminals for connection of external conductors)	-	2500	N/A
3.4(Disconnection from the mains supply)	-	2500	N/A
3.5(Interconnection of equipment)	-	2500	N/A
4.1(Stability)	-	2500	N/A
4.2(Mechanical strength)	-	19000	N/A
4.3(Design and construction)	-	2500	N/A
4.4(Protection against hazardous moving parts)	-	2500	N/A
4.5(Thermal requirements)	-	17500	N/A
4.6(Openings in enclosures)	-	2500	N/A
4.7(Resistance to fire)	-	33000	N/A
5.1(Touch current and protective conductor curren)	-	3500	N/A
5.2(Electric strength)	-	3500	N/A
5.3(Abnormal operating and fault conditions)	-	8500	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3500	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	7000	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	N/A
7.1(General)	-	2500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	12700	N/A

Complete

-
-

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis

Complete

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1056 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1056	GST not included
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1056	GST not included
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1056	GST not included
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	GST not included
4.1(General)	-	1056	-

Complete

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

3597 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.9 - c( Metal wires and rods)	-	500	N/A
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	N/A
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	N/A
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	N/A
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	500	N/A
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	500	N/A
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	N/A
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	N/A
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	N/A
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	N/A
4.11.6(Cords- Electrical cables)	-	500	N/A
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	N/A
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	N/A
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.10(Cords-Cords on toy bags)	-	500	N/A
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	500	N/A
4.11.11( Cords, strings and lines for flying toys- )	-	500	N/A
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	N/A
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	N/A
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	N/A
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	N/A
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	N/A
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	N/A
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	N/A
4.14(a)(Springs)	-	500	N/A
4.14(b)(Springs)	-	500	N/A
4.14(c)(Springs)	-	500	N/A
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	N/A
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	N/A
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	N/A
4.16.1(Enclosures-Ventilation)	-	500	N/A
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	N/A
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	N/A
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	N/A
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	N/A
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	N/A
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	N/A
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	N/A
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	N/A
4.18.2(b)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(c)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	N/A
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	N/A
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	N/A
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	N/A
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	N/A
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	N/A
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	N/A
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	N/A
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	N/A
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	N/A
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	N/A
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	N/A
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	N/A
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	N/A
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	N/A
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	N/A
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	N/A
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	N/A
4.19(Rotors and propellers)	-	500	N/A
4.2(Aquatic toys)	-	500	N/A
4.21(a)(Braking)	-	500	N/A
4.22.1(Toy bicycles-Instructions for use)	-	500	N/A
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	N/A
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	N/A
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	N/A
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	N/A
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	N/A
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	N/A
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	N/A
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	N/A
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	N/A
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	N/A
4.6.2(Edges-Functional sharp edges)	-	500	N/A
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	N/A
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	N/A
4.7.2 - a(Points-Functional sharp points)	-	500	N/A
4.7.2 - b(Points-Functional sharp points)	-	500	N/A
4.8.1(Projections-General requirments)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	N/A
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	N/A
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	N/A
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	N/A
4.6.4( Edges-Edges on moulded toys)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	N/A
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.7.3 (Wooden toys)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	N/A
4.1(Normal use)	-	500	N/A
4.3.1(Material quality)	-	500	N/A
5.24.6.1(Tension Test General procedure)	-	500	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	1056	N/A
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	N/A
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	N/A
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	N/A
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	N/A
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	N/A
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	N/A
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	NA
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	NA
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	500	NA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	NA
4.16.1(Enclosures-Ventilation-No of openings)	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	NA
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	NA

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

bureau veritas consumer products services india private limited

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8800198061 [email protected]

Scope List