BIS - LIMS (Laboratory Information Management System)

Alpha Test House

plot no.160,Industrial Area Phase-9, Sahibzada Ajit Singh Nagar, S.A.S Nagar, Punjab, 160062

9888717272 [email protected]

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

- View breakup
Rs.3100/- (40% discount to BIS), Rs.2000/- for Concrete cube

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2020

-
Only for water for construction purpose as per cl.5.4

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2020

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

M-30;M-35;M-40;M-50;M-55

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	333.33	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.1.3(Physical requirement)	-	333.33	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.1.4(Physical requirement)	-	333.33	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.1 & 7.1(VISUAL INSPECTION)	-	350	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	3000	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	2250	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	2250	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	3000	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	3000	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	2250	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	2250	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	900	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	900	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	900	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	900	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
Annex-G-7(AVERAGE BREAKING LOAD)	-	900	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	118	FOR BIS SAMPLES:ADDITIONAL 15% DISCOUNT

Complete

31 Dec, 2020

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

fe415,415d,415s,500,500d,500s,550,550d,600

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.3(Load In One Direction)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.4(Load In Other Direction From Bend)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 5(Deformations and Surface Characteristics)	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl 6.1(Length, Width & Thickness)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl 7.2(Weight)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur and phosphorous)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(CE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nitrogen%)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Ni)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Mo)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Cr)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Ti)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(V)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nb)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1( Aluminium %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Copper %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Silicon %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Phosphorus %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Manganese %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Carbon %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(TS/YS ratio)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Yield Stress (YS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 7.2 Table -2 (Nominal Mass)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 6.1(Nominal Size)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT

Complete

31 Dec, 2020

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

C15C18C20C15MMnC18MMnC20MMnC15HMnC18HMnC20HMnC25HMn

23900 View breakup
Rs.5500/- for physical and chemical tests (25% discount to BIS), Rs.7900/- for Micro alloy elements, Rs.10000/- for optional test (25% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
Cl 10.1.a)(Workmanship)	-	5000	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
Cl 10.1.b)(Workmanship)	-	5000	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
Cl 10.2(Press)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
Cl 10.3(Workmanship)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
Cl 11(Length, Width & Thickness)	-	1000	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Carbon %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Manganese %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Phosphorus %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Sulphur %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Silicon %)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1( Copper %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1( Aluminium %)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1( Nb)	-	800	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(V)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1( Ti)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Cr)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Mo)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1(Ni)	-	500	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT
6.1( Nitrogen%)	-	2000	FOR BIS SAMPLES-ADDITIONAL 25% DISCOUNT

Complete

31 Dec, 2020

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

C8;C15;C22

23400 View breakup
Rs.5500/- for physical and chemical tests (25% discount to BIS), Rs.7900/- for Micro alloy elements, Rs.10000/- for optional test (25% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
9( FREEDOM FROM DEFECTS)	-	500	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
10.1.a)( Macro examination IS 11371)	-	5000	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
10.1.b)( Sulphur print tests IS 12037)	-	5000	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%
11 & 12(DIMENSIONS and Tolerances)	-	1000	FOR BIS SAMPLES-ADDITIONAL 25%DISCOUNT GST WILL BE CHARGED EXTRA @18%

Complete

31 Dec, 2020

-
-

Bureau of Indian Standards

The National Standards Body of India

Alpha Test House

plot no.160,Industrial Area Phase-9, Sahibzada Ajit Singh Nagar, S.A.S Nagar, Punjab, 160062

9888717272 [email protected]

Scope List

No Record Found

No Record Found