BIS - LIMS (Laboratory Information Management System)

EMC Testing and Compliance LLP

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 [email protected]

Scope List

Reset

23 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

(Liquidizes and Grinders)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.2(Marking)	-	500	-
7.4(Marking)	-	500	-
7.5(Marking)	-	500	-
7.6(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
14(Transient Over Voltages, IS 302-1)	-	10000	-
15.1(Moisture Resistance, IS 302-1)	-	5000	-
15.2(Moisture Resistance-Spillage test)	-	2000	-
15(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	15000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	500	-
22.2(Construction)	-	500	-
22.3(Construction)	-	500	-
22.4(Construction)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction)	-	500	-
22.8(Construction)	-	500	-
22.9(Construction)	-	500	-
23(Internal Wiring, IS 302-1)	-	2000	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components)	-	500	-
24.4(Components)	-	500	-
24.5(Components)	-	500	-
24.6(Components)	-	500	-
24.7(Components)	-	500	-
24.8(Components)	-	500	-
24.9(Components)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for External Conductors, IS 302-1)	-	2000	-
27(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	2000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	2000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	2000	-
31(Resistance of Rusting, IS 302-1)	-	2000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	-
34.3(Whisking egg whites )	-	500	-
34.4(IDLI batter-Grinding of black gram)	-	500	-
34.5.1 (a)(Operational test for juicers )	-	500	-
34.5.1 (b)(Operational test for juicers )	-	500	-
34.5.2(Operational test for juicers )	-	500	-
35(Temperature withstand test for bowl)	-	2000	-
36(Test for controls )	-	2000	-
Cl 36(Verification)	-	1000	-
37(Strength of Assembly )	-	2000	-

Complete

19 Jul, 2024

-
-

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	5 % Discount for BIS
8(Terminals)	-	2000	5 % Discount for BIS
9(PROVISION FOR EARTHING)	-	2000	5 % Discount for BIS
10(Protection against accidental contact with live parts)	-	2000	5 % Discount for BIS
11(Mositure Resistance and Insulation)	-	10000	5 % Discount for BIS
12(Electric Strength)	-	2000	5 % Discount for BIS
13(Fault conditions)	-	2000	5 % Discount for BIS
15(Construction)	-	2000	5 % Discount for BIS
16(Creepage distance and clearances)	-	2000	5 % Discount for BIS
17(Screws, current carrying parts and connections)	-	2000	5 % Discount for BIS
18(Resistance to heat, fire and tracking)	-	2000	5 % Discount for BIS
19(Resistance to corrosion)	-	5000	5 % Discount for BIS
21(Heat management)	-	1000	5 % Discount for BIS

Complete

19 Jul, 2024

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6(Marking)	-	1000	5 % Discount for BIS
7(Construction)	-	2000	5 % Discount for BIS
8(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9(Provision for earthing)	-	2000	5 % Discount for BIS
10(Terminals)	-	2000	5 % Discount for BIS
11(External & Internal Wiring)	-	2000	5 % Discount for BIS
12(Protection against electric shock)	-	2000	5 % Discount for BIS
13(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14(Resistance to Dust and Moisture)	-	10000	5 % Discount for BIS
15(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS
17(Photometric Test)	-	0	5 % Discount for BIS

Complete

19 Jul, 2024

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6.0(Marking)	-	1000	5 % Discount for BIS
7.0(Construction)	-	2000	5 % Discount for BIS
8.0(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9.0(Provision for earthing)	-	2000	5 % Discount for BIS
10.0(Terminals)	-	2000	5 % Discount for BIS
11.0(External & Internal Wiring)	-	2000	5 % Discount for BIS
12.0(Protection against electric shock)	-	2000	5 % Discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5 % Discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS
17.0(Photometric Test)	-	0	5 % Discount for BIS

Complete

19 Jul, 2024

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6.0(Marking)	-	1000	5 % Discount for BIS
7.0(Construction)	-	500	5 % Discount for BIS
8.0(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9.0(Provision for earthing)	-	2000	5 % Discount for BIS
10.0(Terminals)	-	2000	5 % Discount for BIS
11.0(External & Internal Wiring)	-	2000	5 % Discount for BIS
12.0(Protection against electric shock)	-	2000	5 % Discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5 % Discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS

Complete

19 Jul, 2024

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

Electric Toys and Non-Electric toys (all ranges)

5000 View breakup
Rs.5000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples

Complete

19 Jul, 2024

-
-

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

Toys and Similar products

3000 View breakup
Rs.3000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3000	10 % discount for BIS Samples

Complete

19 Jul, 2024

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Electric Toys and Non-Electric toys (all ranges)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	10% discount for BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	2000	10% discount for BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	2000	10% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	10% discount for BIS
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	10% discount for BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	2000	10% discount for BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	10% discount for BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	10% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	10% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	2000	10% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	2000	10% discount for BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	10% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	10% discount for BIS

Complete

19 Jul, 2024

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

Electric & Non-Electric Toys

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	200	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	200	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	200	-
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	2000	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	200	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	200	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	200	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	200	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	200	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	200	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	200	-
4.6.2(Edges-Functional sharp edges)	-	200	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	200	-
4.6.4( Edges-Edges on moulded toys)	-	200	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	200	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	200	-
4.7.2 - a(Points-Functional sharp points)	-	200	-
4.7.2 - b(Points-Functional sharp points)	-	200	-
4.7.3 (Wooden toys)	-	200	-
4.8.1(Projections-General requirments)	-	200	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.21(b)(braking)	-	500	-
4.22.1(Toy bicycles-Instructions for use)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	5000	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	2000	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.25(Liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	200	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	200	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	5000	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	2000	For Single unit
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	For Single unit
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	For Single unit
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	2000	For Single unit
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	For Single unit
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	2000	For Single unit
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	For Single unit
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	For Single unit
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	2000	For Single unit
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	2000	For Single unit
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	For Single unit
5.24.6.1(Tension Test General procedure)	-	200	-
4.1(Normal use)	-	200	-
4.3.1(Material quality)	-	200	-

Complete

19 Jul, 2024

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

Rated Voltage < 250V for single phase & 480V for other

50000 View breakup
Rs.50,000/- for Cooking ranges, Induction Hobs, Griddles, Grills, Steam, Ovens, and Similar Appliances

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	2000	10% Discount for BIS
8.0(Protection against access to live part test)	-	2000	10% Discount for BIS
10.0(Power Input and current test)	-	2000	10% Discount for BIS
11.0(Heating test)	-	5000	10% Discount for BIS
13.0(Leakage current and electric strength test)	-	2000	10% Discount for BIS
14.0(Transient voltages)	-	10000	10% Discount for BIS
15.0(Moisture Resistance)	-	15000	10% Discount for BIS
16.0(Leakage current and electric strength test)	-	2000	10% Discount for BIS
17.0(Overload protection of transformers test)	-	5000	10% Discount for BIS
19.0(Abnormal Operations)	-	15000	10% Discount for BIS
20.0(Stability and Mechanical Hazards)	-	2000	10% Discount for BIS
21.0(Mechanical Strength)	-	2000	10% Discount for BIS
22.0(Construction verification related tests)	-	2000	10% Discount for BIS
23.0(Internal wiring)	-	2000	10% Discount for BIS
24.0(Components)	-	2000	10% Discount for BIS
25.0(Supply connections and External Flexible Cords)	-	2000	10% Discount for BIS
26.0(Terminal for External Conductors)	-	2000	10% Discount for BIS
27.0(Provision for Earthing)	-	2000	10% Discount for BIS
28.0(Screws and connections)	-	2000	10% Discount for BIS
29.0(Clearances and Creepage distances and solid insulation)	-	2000	10% Discount for BIS
30.0(Resistance to heat and fire)	-	5000	10% Discount for BIS
31.0(Resistance to rusting)	-	5000	10% Discount for BIS
6.0(Classification)	-	0	Visual Inspection
11.0(Heating test)	-	2000	10% Discount for BIS
15.0(Moisture Resistance)	-	5000	10% Discount for BIS
30.0(Resistance to heat and fire)	-	2000	10% Discount for BIS

Complete

19 Jul, 2024

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Video Displays limited to 90"

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	Pre-tested certificates are analysed and reported 10% Discount for BIS
1.6(Power interface .)	-	5000	10% Discount for BIS
1.7(Markings and instructions)	-	5000	10% Discount for BIS
2.1(Protection from electric shock and energy hazards)	-	5000	10% Discount for BIS
2.2(SELV circuits)	-	5000	10% Discount for BIS
2.3(TNV circuits)	-	5000	10% Discount for BIS
2.4(Limited current circuits)	-	5000	10% Discount for BIS
2.5(Limited power sources .)	-	5000	10% Discount for BIS
2.6(Provisions for earthing and bonding)	-	10000	10% Discount for BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	5000	10% Discount for BIS
2.9(Electrical insulation)	-	5000	10% Discount for BIS
2.10(Clearances, creepage distances and distances through insulation)	-	5000	10% Discount for BIS
3.1(General)	-	5000	10% Discount for BIS
3.2(Connection to a mains supply)	-	5000	10% Discount for BIS
3.3(Wiring terminals for connection of external conductors)	-	5000	10% Discount for BIS
3.4(Disconnection from the mains supply)	-	5000	10% Discount for BIS
3.5(Interconnection of equipment)	-	5000	10% Discount for BIS
4.1(Stability)	-	5000	10% Discount for BIS
4.2(Mechanical strength)	-	5000	10% Discount for BIS
4.3(Design and construction)	-	5000	10% Discount for BIS
4.4(Protection against hazardous moving parts)	-	5000	10% Discount for BIS
4.5(Thermal requirements)	-	5000	10% Discount for BIS
4.6(Openings in enclosures)	-	2000	10% Discount for BIS
4.7(Resistance to fire)	-	5000	10% Discount for BIS
5.1(Touch current and protective conductor curren)	-	5000	10% Discount for BIS
5.2(Electric strength)	-	5000	10% Discount for BIS
5.3(Abnormal operating and fault conditions)	-	5000	10% Discount for BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	10% Discount for BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	4000	10% Discount for BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	4000	10% Discount for BIS
7.1(General)	-	1000	10% Discount for BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	3000	10% Discount for BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	3000	10% Discount for BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	10% Discount for BIS

Complete

19 Jul, 2024

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

250V for 1Ph, 480V for 3Ph

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	2000	10 % discount on BIS samples
7.0(Classification)	-	1000	10 % discount on BIS samples
8.0(Protection against access to live parts)	-	2000	10 % discount on BIS samples
10.0(Input and Current)	-	5000	10 % discount on BIS samples
11.0(Heating)	-	3000	10 % discount on BIS samples
13.0(Leakage Current and electric strength at operating temperature)	-	3000	10 % discount on BIS samples
14.0(Transient Overvoltage)	-	5000	10 % discount on BIS samples
15.0(Moisture resistance)	-	5000	10 % discount on BIS samples
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	3000	10 % discount on BIS samples
17.0(Overload Protection of transformer and associated circuit)	-	5000	10 % discount on BIS samples
19.0(Abnormal Operation)	-	5000	10 % discount on BIS samples
20.0(Stability and mechanical hazards)	-	5000	10 % discount on BIS samples
21.0(Mechanical Strength)	-	5000	10 % discount on BIS samples
22.0(Construction)	-	5000	10 % discount on BIS samples
23.0(Internal Wiring)	-	5000	10 % discount on BIS samples
24.0(Components)	-	2000	10 % discount on BIS samples
25.0(Supply Connection and External Flexible Cords)	-	5000	10 % discount on BIS samples
26.0(Terminals for external conductors)	-	5000	10 % discount on BIS samples
27.0(Provision For Earthing)	-	5000	10 % discount on BIS samples
28.0(Screws and Connections)	-	5000	10 % discount on BIS samples
29.0(Creepage Distances and Clearances)	-	5000	10 % discount on BIS samples
30.0(Resistance To Heat and Fire)	-	5000	10 % discount on BIS samples
31.0(Resistance To Rusting)	-	5000	10 % discount on BIS samples

Complete

19 Jul, 2024

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

DC or AC Supplied Electronic Controlgear For LED Module

45000 View breakup
Rs. 45,000/- for DC OR AC SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES 10% discount to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	10 % Discount for BIS samples
8(Protection against accidental contact with live parts)	-	2000	10 % Discount for BIS samples
9(Terminals)	-	2000	10 % Discount for BIS samples
10(PROVISION FOR EARTHING)	-	2000	10 % Discount for BIS samples
11(MOISTURE RESISTANCE)	-	10000	10 % Discount for BIS samples
12(Electric Strength)	-	5000	10 % Discount for BIS samples
13(Thermal endurance test for winding of ballasts)	-	10000	10 % Discount for BIS samples
14(Fault conditions)	-	5000	10 % Discount for BIS samples
15(Transformer heating)	-	2000	10 % Discount for BIS samples
16(Construction)	-	2000	10 % Discount for BIS samples
17(Creepage distance and clearances)	-	2000	10 % Discount for BIS samples
18(Screws, current carrying parts and connections)	-	2000	10 % Discount for BIS samples
19(Resistance to heat, fire and tracking)	-	5000	10 % Discount for BIS samples
20(Resistance to corrosion)	-	5000	10 % Discount for BIS samples

Complete

19 Jul, 2024

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Restricted to cap type B22d, E14 and E27 only.

35000 View breakup
Rs. 45,000/- for SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES 10% discount to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
6(Interchangeability)	-	5000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
7(Protection against accidental contact with live parts)	-	2000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
8(Insulation Resistance and Electric Strength)	-	10000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
9(MECHANICAL STRENGTH)	-	2000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
10(cap temperature)	-	10000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
11(Resistance to Heat)	-	5000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
12(Resistance to Flame and Ignition)	-	5000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
13(Fault conditions)	-	3000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples
14(Creepage distance and clearances)	-	2000	Restricted to cap type B22d, E14 and E27 only. 10 % Discount for BIS samples

Complete

19 Jul, 2024

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

Upto 10kV

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	5000	10 % Discount for BIS samples
4.7(Marking & instructions)	-	5000	10 % Discount for BIS samples
5.1(Protection against shock and energy hazards)	-	5000	10 % Discount for BIS samples
5.2(Requirement of auxiliary circuits)	-	5000	10 % Discount for BIS samples
5.3(Protective earthing and bonding)	-	5000	10 % Discount for BIS samples
5.4(AC and DC power isolation)	-	5000	10 % Discount for BIS samples
5.5(Over current and earth fault condition)	-	5000	10 % Discount for BIS samples
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	10 % Discount for BIS samples
6.1(Wiring, connections and supply)	-	5000	10 % Discount for BIS samples
6.2(Connection to power)	-	5000	10 % Discount for BIS samples
6.3(Wiring terminals for external power conductors)	-	5000	10 % Discount for BIS samples
7.1(Enclosure)	-	5000	10 % Discount for BIS samples
7.2(STABILITY)	-	5000	10 % Discount for BIS samples
7.3(MECHANICAL STRENGTH)	-	5000	10 % Discount for BIS samples
7.4(Construction details)	-	5000	10 % Discount for BIS samples
7.5(Resistance to fire)	-	5000	10 % Discount for BIS samples
7.6(Battery location)	-	5000	10 % Discount for BIS samples
7.7(Temperature rise)	-	5000	10 % Discount for BIS samples
8.1(General procision for earth leakage)	-	5000	10 % Discount for BIS samples
8.2(Electric Strength)	-	5000	10 % Discount for BIS samples
8.3(Abnormal operating and fault conditions)	-	5000	10 % Discount for BIS samples
9.0(Connection to telecommunication networks)	-	5000	10 % Discount for BIS samples

Complete

19 Jul, 2024

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

Restricted to Cell-5V, 10A & Batteries: 22V, 10A

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	4000	Cell: INR 65,000/- Battery: INR 75,000/- 10 % Discount for BIS samples
7(Specific requirements and tests)	-	70000	10 % Discount for BIS samples
8(Information for safety)	-	2000	10 % Discount for BIS samples
9(Marking)	-	2000	10 % Discount for BIS samples
10(Packaging)	-	2000	10 % Discount for BIS samples
4(Parameter Measurement Tolerances)	-	500	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	500	-
5.3(Venting)	-	500	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	500	-
5.8(Battery Safety Components)	-	500	-
6(Tyoe Test amd Sample Size)	-	500	-
7.1(Charging procedure for test purposes)	-	500	-
7.2(Intended Use)	-	500	-
7.3(Reasonably foreseeable misuse)	-	500	-
8.1(General)	-	500	-
8.2(Small Cell and battery safety information)	-	500	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-
9.3(Caution for ingestion of small cells and batteries)	-	500	-
9.4(Other information)	-	500	-

Complete

19 Jul, 2024

-
-

IS 16046 : Part 1 (2018)

Restricted to Cell-5V, 10A & Batteries: 22V, 10A

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Packaging)	-	2000	Cell: INR 90,000/- Battery: INR 75,000/- 10 % Discount for BIS samples
7(Specific requirements and tests)	-	75000	10 % Discount for BIS samples
9(Marking)	-	4000	10 % Discount for BIS samples
8(Information for safety)	-	2000	10 % Discount for BIS samples
5(General Safety Considerations)	-	2000	10 % Discount for BIS samples
4(Parameter Measurement Tolerances)	-	500	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	500	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	500	-
6(Tyoe Test amd Sample Size)	-	500	-
7.1(Charging procedure for test purposes)	-	500	-
7.2(Intended Use)	-	500	-
7.3(Reasonably foreseeable misuse)	-	500	-
8.1(General)	-	500	-
8.2(Small Cell and battery safety information)	-	500	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-

Complete

19 Jul, 2024

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

Upto 250V

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
14(TRANSIENT OVERVOLTAGES)	-	10000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	2000	-

Complete

19 Jul, 2024

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

Handlamps

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
8.2(Packing -Each Package shall bear the following Particulars)	-	200	-
7.0(Construction)	-	20000	-
8.0(Creepage Distance and Clearances)	-	5000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	8000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-

Complete

19 Jul, 2024

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

Rating up to 300V only

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	5000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	5000	-
13.0(Endurance Tests and Thermal Tests)	-	15000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-

Complete

19 Jul, 2024

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

LED Chain Lights

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	1000	-
20.5(Classification of Luminaires')	-	2000	-
20.6(Marking)	-	2000	-
20.7(Construction)	-	2000	-
20.8(Creepage Distance and Clearances)	-	5000	-
20.10(Terminals)	-	2000	-
20.11(External & Internal Wiring)	-	2000	-
20.12(Protection against electric shock)	-	5000	-
20.13(Endurance Tests and Thermal Tests)	-	15000	-
20.14(Resistance to Dust & Moisture)	-	5000	-
20.15(Insulation Resistance and Electric Strength)	-	5000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-

Complete

19 Jul, 2024

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

AC/ DC Adapters for household and similar appliance

50000 View breakup
Rs 50,000/- for Adaptors

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	10% Discount for BIS
8.1.1(Protection against live parts in all positions)	-	2000	10% Discount for BIS
8.1.2(Protection against live parts in openings)	-	2000	10% Discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	10% Discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	2000	10% Discount for BIS
10.1(Power input)	-	2000	10% Discount for BIS
10.2(Current input)	-	2000	10% Discount for BIS
11.1(General)	-	2000	10% Discount for BIS
11.2(General)	-	2000	10% Discount for BIS
11.3(Heating)	-	2000	10% Discount for BIS
13.1(General)	-	2000	10% Discount for BIS
13.2(Leakage current at operating temperature)	-	2000	10% Discount for BIS
13.3(Electric Strength at operating temperature)	-	2000	10% Discount for BIS
14(Transient Over Voltages)	-	10000	10% Discount for BIS
15.0(General)	-	2000	10% Discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	10% Discount for BIS
15.2(Spillage Test)	-	2000	10% Discount for BIS
15.3(Humidity Test)	-	5000	10% Discount for BIS
16.0(General)	-	2000	10% Discount for BIS
16.2(Leakage Current (after Clause 15))	-	2000	10% Discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	10% Discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	5000	10% Discount for BIS
19(Abnormal Operation)	-	15000	10% Discount for BIS
20(Stability test)	-	2000	10% Discount for BIS
21(Mechanical Strength Test)	-	2000	10% Discount for BIS
22(Construction verification related test)	-	2000	10% Discount for BIS
23(General)	-	2000	10% Discount for BIS
25(Supply connection and external flexible cords)	-	2000	10% Discount for BIS
26(Terminals for external conductors)	-	2000	10% Discount for BIS
27(Provision for earthing)	-	2000	10% Discount for BIS
28(Screw test and connections)	-	2000	10% Discount for BIS
29(clearance, creepage distances and solid insulation)	-	2000	10% Discount for BIS
30.1(Ball pressure test)	-	2000	10% Discount for BIS
30.2(Glow Wire Test)	-	2000	10% Discount for BIS
30.2(Needle Flame Test)	-	2000	10% Discount for BIS
31(Resistance to Rusting)	-	5000	10% Discount for BIS

Complete

19 Jul, 2024

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Upto and including 250V supply for Household and simila

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8.2(Marking )	-	500	10% discount on BIS samples
8.3,a(Marking )	-	500	10% discount on BIS samples
8.3,b(Marking )	-	500	10% discount on BIS samples
8.3,c(Marking )	-	500	10% discount on BIS samples
8.3,d(Marking )	-	500	10% discount on BIS samples
8.3,e(Marking )	-	500	10% discount on BIS samples
8.1,a(Marking )	-	500	10% discount on BIS samples
8.1,b(Marking )	-	500	10% discount on BIS samples
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	10% discount on BIS samples
8.1,c(Marking )	-	500	10% discount on BIS samples
8.1,d(Marking )	-	500	10% discount on BIS samples
8.1,e(Marking )	-	500	10% discount on BIS samples
8.1,f(Marking )	-	500	10% discount on BIS samples
8.1,g(Marking )	-	500	10% discount on BIS samples
8.4(Marking )	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	10% discount on BIS samples
6.2(Rating)	-	500	10% discount on BIS samples
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	10% discount on BIS samples
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	10% discount on BIS samples
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
10.1(Speed Regulators)	-	2000	10% discount on BIS samples
10.2(Speed Regulators)	-	2000	10% discount on BIS samples
10.3(Speed Regulators)	-	2000	10% discount on BIS samples
10.4(Speed Regulators)	-	2000	10% discount on BIS samples
10.5(Speed Regulators)	-	2000	10% discount on BIS samples
10.6(Speed Regulators)	-	2000	10% discount on BIS samples
10.7(Speed Regulators)	-	2000	10% discount on BIS samples
10.8(Speed Regulators)	-	2000	10% discount on BIS samples
11.1(Starting)	-	2000	10% discount on BIS samples
11.2(Starting)	-	2000	10% discount on BIS samples
12(Interchangeability)	-	2000	10% discount on BIS samples
13(Silent Operation)	-	5000	10% discount on BIS samples
14.3 & Table 1(Test for Air Performance)	-	5000	10% discount on BIS samples
14.4(Measurement of Speed of the Fan )	-	4000	10% discount on BIS samples
14.5(Measurement of Power factor and Power Input)	-	4000	10% discount on BIS samples
16(Endurance Test)	-	5000	10% discount on BIS samples
17(Test for Harmonic Distortion)	-	4000	10% discount on BIS samples

Complete

19 Jul, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

EMC Testing and Compliance LLP

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 [email protected]

Scope List