BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE, bhadhaurgarh

198-199, M.I.E, PHASE-I, BAHADURGARH, HARYANA-124507, Bahadurgarh, Jhajjar, Haryana, 124507

9711227171 [email protected]

Scope List

Reset

31 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	10% discount for BIS
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% discount for BIS
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% discount for BIS
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% discount for BIS
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	10% discount for BIS
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	10% discount for BIS
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	10% discount for BIS
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	1000	10% discount for BIS
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	2000	10% discount for BIS
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	2000	10% discount for BIS
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2000	10% discount for BIS
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2000	10% discount for BIS
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	3000	10% discount for BIS
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	3000	10% discount for BIS
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	3000	10% discount for BIS
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	2000	10% discount for BIS
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	3000	10% discount for BIS

Complete

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

16426 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	500	10% discount for BIS
3(Designation)	-	1500	10% discount for BIS
4(Colour)	-	1500	10% discount for BIS
6(Dimensions of pipes)	-	1500	10% discount for BIS
7(Visual Appearance)	-	500	10% discount for BIS
8.1(Hydraulic characteristics)	-	4000	10% discount for BIS
8.2(Reversion)	-	1500	10% discount for BIS
8.3(Density)	-	3000	10% discount for BIS
8.4(Melt Flow Rate)	-	3000	10% discount for BIS
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	3500	10% discount for BIS
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	3500	10% discount for BIS

Complete

-
-

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	200	10% Discount for BIS
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	200	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	200	10% Discount for BIS
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	300	10% Discount for BIS
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	300	10% Discount for BIS
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	300	10% Discount for BIS
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	300	10% Discount for BIS
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	300	10% Discount for BIS
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	300	10% Discount for BIS
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	300	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	300	10% Discount for BIS
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	300	10% Discount for BIS
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	300	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	300	10% Discount for BIS
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	300	10% Discount for BIS
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	300	10% Discount for BIS
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	300	10% Discount for BIS
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	300	10% Discount for BIS
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	300	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	376	10% Discount for BIS
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	200	10% Discount for BIS
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	200	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	200	10% Discount for BIS
Cl.4.4.5 ( Table 1.)(b) Weft )	-	200	10% Discount for BIS
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	10% Discount for BIS
Cl.4.1.1 upper IS 1969(b)Weft)	-	200	10% Discount for BIS
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	200	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	200	10% Discount for BIS
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	200	10% Discount for BIS
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	10% Discount for BIS
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	10% Discount for BIS
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	200	10% Discount for BIS
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	200	10% Discount for BIS
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	10% Discount for BIS
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	200	10% Discount for BIS
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	200	10% Discount for BIS
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	10% Discount for BIS
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	200	10% Discount for BIS
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	200	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	200	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	200	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	200	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	200	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	200	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	200	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	200	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	200	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	200	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	200	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	200	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	200	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	200	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	200	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	200	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	200	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	200	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	200	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	200	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	200	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	200	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	200	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	200	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	200	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	200	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	200	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	200	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	200	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	200	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	200	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	200	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	200	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	200	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	200	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	200	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	200	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	200	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	200	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	200	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	200	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	200	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	200	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	200	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	200	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	200	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	200	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	200	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	200	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	200	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	200	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	200	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	200	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	200	-

Complete

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	2000	10% discount for BIS
8.9 table-6(Elongation at Break)	-	2000	10% discount for BIS
8.8(Tensile Strength for Butt-fusion)	-	2000	10% discount for BIS
8.7(Density)	-	1000	10% discount for BIS
8.5 (Oxidation Induction Time)	-	1500	10% discount for BIS
8.4( Melt Flow Rate)	-	1500	10% discount for BIS
8.2(Longitudinal Reversion Test)	-	2000	10% discount for BIS
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	500	10% discount for BIS
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	500	10% discount for BIS
7.4.1.2(Ovality)	-	500	-
7.4 table -3 & 4(6.1 Dimensions)	-	1500	-
7.2(Length)	-	1500	-
6.2.1(6.1.1 Identification Stripes)	-	1500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.3(Carbon black)	-	2000	-
5.3(e)(Carbon Black Master Batch)	-	2000	-
5.3(d)(Carbon Black Master Batch)	-	2000	-
5.3(c)(Carbon Black Master Batch)	-	2000	-
5, 5.1 table-1(MATERIALS)	-	1000	-
7()	-	1000	-
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	500	-
8.6(Overall migration)	-	500	-

Complete

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	2500	10% Discount for BIS
9.5(Tensile Strength IS 12235(Part 13))	-	2500	10% Discount for BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	2500	10% Discount for BIS
9.3(Density IS 12235 (Part 14))	-	2500	10% Discount for BIS
9.1( Visual Appearance)	-	500	10% Discount for BIS
9.1(Visual Appearance)	-	500	10% Discount for BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4(Sealing rings - Hardness)	-	100	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	100	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	100	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	100	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	100	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	100	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	100	-
7.3.2(Rib height)	-	100	-
7.3.1(No.of Ribs)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	100	-
5(COLOUR)	-	1000	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	500	-
8.4(Width b)	-	500	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	500	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	500	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	500	-
5.0(Colour of Pipes)	-	1000	-
9.2(Internal Diameter)	-	500	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	1000	-

Complete

-
-

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	100	10% Discount for BIS
5.1(Tensile Adhesion Strength )	-	7900	10% Discount for BIS
5.1(Tensile Adhesion Strength)	-	7900	10% Discount for BIS
5.2(Shear Adhesion Strength )	-	14000	10% Discount for BIS
5.2(Shear Adhesion Strength)	-	14000	10% Discount for BIS
5.2(Shear Adhesion Strength)	-	14000	10% Discount for BIS
5.3(OpenTime)	-	1000	10% Discount for BIS
5.4(Adjustment Time)	-	1000	10% Discount for BIS
5.5(Slip (Required for Vertical Application Only))	-	1000	10% Discount for BIS
5.6(Deformability (Required for VerticalApplication Only))	-	5000	10% Discount for BIS

Complete

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Visual Appearance)	-	500	10% Discount for BIS
Cl 7(Dimensions Of Pipes)	-	1500	10% Discount for BIS
Cl 9.1(Hydraulic Characteristics)	-	3500	10% Discount for BIS
Cl 9.3(Reversion Test )	-	2500	10% Discount for BIS
Cl 9.2(Fusion Compatibility)	-	2500	10% Discount for BIS
Cl 9.4 & Annex B(Impact Strength)	-	2500	10% Discount for BIS
Cl 9.5(Density)	-	2000	10% Discount for BIS
Cl 9.9(Opacity)	-	2000	10% Discount for BIS
Cl 9.6(Melt Flow Rate)	-	2000	10% Discount for BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	2500	10% Discount for BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	2500	10% Discount for BIS
Cl 4( Designation)	-	1500	10% Discount for BIS

Complete

-
-

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	10% Discount for BIS
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	10% Discount for BIS
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	10% Discount for BIS
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	10% Discount for BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	500	10% Discount for BIS
7.1.3 (Effective length)	-	500	10% Discount for BIS
8(Pipe Ends)	-	500	10% Discount for BIS
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	1000	10% Discount for BIS
9.1(Visual Appearance)	-	500	10% Discount for BIS
9.1(Visual Appearance)	-	500	10% Discount for BIS
9.2 IS 12235 (Part 3)(Opacity)	-	500	10% Discount for BIS
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	10% Discount for BIS
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	10% Discount for BIS
9.6 IS 12235(Part 14)(Density)	-	1500	10% Discount for BIS
10(Mechanical Properties)	-	3000	10% Discount for BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3000	10% Discount for BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3000	10% Discount for BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3000	10% Discount for BIS
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	1500	10% Discount for BIS
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1500	10% Discount for BIS
10.4 IS 12235(Part 19)(Flattening Test)	-	2000	10% Discount for BIS
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	3000	10% Discount for BIS
7.1.2(Wall Thickness (Maximum))	-	1500	10% Discount for BIS
7.1.1(Outside Diameter at any point (Maximum))	-	1000	10% Discount for BIS
6.3.1 Annex B(Chloride content)	-	1500	10% Discount for BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	10% Discount for BIS

Complete

-
-

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	10% Discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1000	10% Discount for BIS
Clause 7.3, Annex G(Average Breaking Load)	-	2000	10% Discount for BIS
Clause 7.3, Annex G(Individual Breaking Load)	-	2000	10% discount for BIS
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2000	10% discount for BIS
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	10% discount for BIS
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	1000	10% discount for BIS
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	1000	10% discount for BIS
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	1000	10% discount for BIS
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	1000	10% discount for BIS
Clause 7.1.3 (Colour and Texture)	-	500	10% discount for BIS
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	10% discount for BIS
Clause 7.1.1 (General Quality)	-	500	10% discount for BIS
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	1000	10% discount for BIS
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	1000	10% discount for BIS
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	1000	10% discount for BIS
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	1000	10% discount for BIS
Clause 3.20(Spacer nibs)	-	1000	10% discount for BIS

Complete

-
-

IS 4581 (1978)

Specification for phosphorus trichloride, pure and analytical reagent (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description )	-	1000	10% Discount for BIS
3.2, Table 1 and A-2 of IS 4581(Phosphprus Tricloride ( as PCl3 ) - For Analytical Reagent )	-	3000	10% Discount for BIS
3.2, Table 1 and A-3 of IS 4581(Relative density at 27°C/ 27°C - For all Grade)	-	4000	10% Discount for BIS
3.2, Table 1 and A-4 of IS 4581(Evaporation residue, including PCl5 - For All Grades)	-	4000	10% Discount for BIS
3.2, Table 1 and A-5 of IS 4581(Sulphate ( as SO4) - For Analytical Reagent)	-	4000	10% Discount for BIS
3.2, Table 1 and A-6 of IS 4581(Heavy metals (as Pb), - For Analytical Reagent)	-	4000	10% Discount for BIS

Complete

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Shape & Design)	-	500	10% Discount for BIS
5.3(Thickness )	-	500	10% Discount for BIS
5.4(Stud bolt)	-	500	10% Discount for BIS
5.4(Stud diameter)	-	500	10% Discount for BIS
5.4(Tear strength )	-	1000	10% Discount for BIS
5.4(Hardness (shore A)- after ageing)	-	1000	10% Discount for BIS
5.4(Hardness (Shore A))	-	1000	10% Discount for BIS
5.4(Breaking strength )	-	1000	10% Discount for BIS
5.4(Elongation at break )	-	1000	10% Discount for BIS
5.4(Tensile Strength )	-	1000	10% Discount for BIS
5.4(Relative density )	-	1000	10% Discount for BIS
5.4(Shrinkage test (at 100 C temp))	-	2000	10% Discount for BIS
5.4(Shrinkage test (at room temp))	-	1000	10% Discount for BIS
5.4(Split tear strength )	-	2000	10% Discount for BIS
5.4(Compression set)	-	2000	10% Discount for BIS
5.4(Hardness (Shore A))	-	1000	10% Discount for BIS
5.4(Relative density)	-	1000	10% Discount for BIS
6, 6.1, 6.2(Marking and packing)	-	500	10% Discount for BIS

Complete

-
-

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (ix)(Bacterial count (IS 5402))	-	400	10% Discount for BIS
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	300	10% Discount for BIS
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	300	10% Discount for BIS
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	200	10% Discount for BIS
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	200	10% Discount for BIS
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	200	10% Discount for BIS
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	200	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	200	-
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	200	-
Table 1 (ix)(Bacterial count (IS 5402))	-	200	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	200	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	200	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	200	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	200	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	200	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	200	-
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	200	-
Clause no 4(Description)	-	100	-
Clause no 5.2(freedom from extraneous matter)	-	100	-
Clause no 5.4(Flavour)	-	100	-
Table 1 (i)(Moisture (IS 116231or 16072))	-	100	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	100	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	100	-
Table 1 (iv)(Insolubility index (IS 12759))	-	100	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	100	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	100	-
Table 1 (vii)(Lactate content (IS 11202))	-	100	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	100	-

Complete

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		Nil
5.2(Message Readability)	-	15000		Nil

Complete

-
-

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Bacterial count)	-	500	10% Discount for BIS
5.6(Coliform count )	-	500	10% Discount for BIS
5.6(Escherichia coli)	-	300	-
5.6(Coagulase positive Staphylococcus aureus)	-	300	10% Discount for BIS
5.6(Salmonella)	-	500	10% Discount for BIS
5.6(Spore count, Aerobic (Bacillus cereus))	-	300	-
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	300	-
5.6(Listeria monocytogenes)	-	300	-
4(Description)	-	100	-
5.2(Absence of extraneous matter, added colour and added flavour)	-	100	-
Cl 5.4(The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-	100	-
5.6(Moisture)	-	100	-
5.6(Milk protein in milk solids not fat)	-	300	-
5.6(Milk fat)	-	300	-
5.6(Insolubility index)	-	300	-
5.6(Total ash (on dry basis))	-	300	-
5.6(Titratable acidity (lactic acid))	-	300	-
5.6(Scorched particles)	-	300	-

Complete

-
-

IS 14542 (1998)

Partly skimmed milk powder specification

3950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	100	-
Table 1(i)(Moisture Type II (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	100	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	100	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	100	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	100	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	100	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	100	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	100	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	100	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	100	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	100	-
Cl 6.4(Flavour and Taste (IS 10030))	-	100	-
5.1(Description)	-	100	-
6.1(Etraneous matters, added colours and flavours)	-	100	-
6.7 i(Moisture)	-	100	-
6.7 ii(Total solids (milk solids and added salts))	-	100	-
6.7 iii(Milk Fat)	-	100	-
6.7 iv(Insolubiltiy index)	-	100	-
6.7 v(Total ash (on dry basis))	-	100	-
6.7 vi(Titratable acidity as lactic acid)	-	100	-
Table 1(i)(Moisture Type I (IS 11623))	-	100	-
Table 1(i)(Moisture Type II (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	100	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	50	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	50	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	50	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	50	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	50	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	50	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	50	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	50	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	50	-
Cl 6.4(Flavour and Taste (IS 10030))	-	50	-
5.1(Description)	-	50	-
6.1(Etraneous matters, added colours and flavours)	-	50	-
6.7 i(Moisture)	-	50	-
6.7 ii(Total solids (milk solids and added salts))	-	50	-
6.7 iii(Milk Fat)	-	50	-
6.7 iv(Insolubiltiy index)	-	50	-
6.7 v(Total ash (on dry basis))	-	50	-
6.7 vi(Titratable acidity as lactic acid)	-	50	-

Complete

-
-

IS 1165 (2002)

Milk powder - Specification (First Revision)

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	10% Discount for BIS
3.2(Flavour and Taste)	-	500	10% Discount for BIS
3.4.5(Moisture)	-	250	10% Discount for BIS
3.4.5(Total solids)	-	500	10% Discount for BIS
3.4.5(Fat)	-	500	10% Discount for BIS
3.4.5(Insolubility index)	-	500	10% Discount for BIS
3.4.5(Total ash)	-	500	10% Discount for BIS
3.4.5(Titratable acidity (lactic acid))	-	250	-
3.5(Bacterial count)	-	800	10% Discount for BIS
3.5.2(Coliform count)	-	800	10% Discount for BIS
3.5.3(Staphylococcus Aureus)	-	800	10% Discount for BIS
3.5.4(Salmonella)	-	800	10% Discount for BIS
3.5.5(Shigella)	-	800	10% Discount for BIS
3.1(Description)	-	0	-
3.2(Flavour and Taste)	-	0	-
3.4.5(Moisture)	-	0	-
3.4.5(Total solids)	-	0	-
3.4.5(Fat)	-	0	-
3.4.5(Insolubility index)	-	0	-
3.4.5(Total ash)	-	0	-
3.4.5(Titratable acidity (lactic acid))	-	0	-
3.5(Bacterial count)	-	0	-
3.5.2(Coliform count)	-	0	-
3.5.3(Staphylococcus Aureus)	-	0	-
3.5.4(Salmonella)	-	0	-
3.5.5(Shigella)	-	0	-

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	Nil
1.6(Power interface .)	-	2000	Nil
1.7(Markings and instructions)	-	0	Nil
2.1(Protection from electric shock and energy hazards)	-	500	Nil
2.3(TNV circuits)	-	1000	Nil
2.4(Limited current circuits)	-	500	Nil
2.5(Limited power sources .)	-	500	Nil
2.6(Provisions for earthing and bonding)	-	1000	Nil
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	Nil
2.8(Safety interlocks)	-	0	Nil
2.9(Electrical insulation)	-	1000	Nil
2.10(Clearances, creepage distances and distances through insulation)	-	1000	Nil
3.1(General)	-	2000	Nil
3.2(Connection to a mains supply)	-	1500	Nil
3.3(Wiring terminals for connection of external conductors)	-	1500	Nil
3.4(Disconnection from the mains supply)	-	2000	Nil
3.5(Interconnection of equipment)	-	0	visual inspection test
4.1(Stability)	-	1000	Nil
4.2(Mechanical strength)	-	1000	Nil
4.3(Design and construction)	-	1000	nil
4.4(Protection against hazardous moving parts)	-	2000	Nil
4.5(Thermal requirements)	-	2000	Nil
4.6(Openings in enclosures)	-	3000	Nil
4.7(Resistance to fire)	-	500	Nil
5.1(Touch current and protective conductor curren)	-	1500	Nil
5.2(Electric strength)	-	1500	Nil
5.3(Abnormal operating and fault conditions)	-	1000	Nil
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	Nil
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2500	Nil
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	Nil
7.1(General)	-	0	visual inspection test
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	20000	Nil
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2500	Nil
7.4(Insulation between primary circuits and cable distribution systems)	-	500	Nil
2.2(SELV circuits)	-	300	Nil
2.10.4.2(Material Group and Comparative Tracking Index)	-	200	Nil
2.10.5.3(Insulating Compound as Solid Insulation)	-	200	Nil
2.10.5.6(Thin sheet materials)	-	200	Nil
2.10.5.11(SMPS Transformer and Inductor)	-	300	Nil
2.10.5.12(Wires in wound components)	-	300	Nil
2.10.5.13(Winding wire)	-	300	Nil
2.10.5.14(Additional insulation in wound components)	-	200	Nil
2.10.6(PCB material)	-	200	Nil
2.10.8.2(Thermal conditioning (thermal ageing))	-	300	Nil
2.10.8.4(Abrasion resistance test)	-	500	Nil
2.10.9(Thermal Cycling)	-	500	Nil
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	Nil
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	Nil
2.10.12(Enclosed and sealed parts)	-	500	Nil
3.1.4(Internal wire)	-	500	Nil
3.2.4(Appliance inlet /connector)	-	500	Nil
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	Nil
Annex K(Thermal Control)	-	500	Nil
Annex B(Motor tests under abnormal conditions)	-	500	Nil
Annex C(Transformers)	-	500	Nil
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	Nil

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	-
7(Heating under normal operating conditions)	-	3000	-
8(Constructional requirements with regard to the protection against electric shock)	-	3000	-
9(Electric shock hazard under normal operating conditions)	-	3000	-
10(Insulation requirements)	-	5000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
14(Components)	-	0	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	4000	-
17(Electrical connections and mechanical fixings)	-	3000	-
19(Stability and mechanical hazards)	-	3000	-
20(Resistance to fire)	-	3000	-
6.1(Ionizing radiation)	-	500	-
6.2(Laser Radiation)	-	500	-
6.3()	-	1000	-

Complete

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	Qualitative Test
5(General Safety Considerations)	-	0	Qualitative Test
5.1(General)	-	0	Qualitative Test
5.2(Insulation and Wiring)	-	0	Qualitative Test
5.3(Venting)	-	0	Qualitative Test
5.4(Temperature, Voltage and Current Management)	-	0	Qualitative Test
5.5(Terminal Contacts)	-	0	Qualitative Test
5.6(Assembly of Cells into batteries)	-	0	Qualitative Test
5.7(Quality Plan)	-	0	Qualitative Test
5.8(Battery Safety Components)	-	0	Qualitative Test
6(Tyoe Test amd Sample Size)	-	0	Qualitative Test
7(Specific requirements and tests)	-	0	Qualitative Test
7.1(Charging procedure for test purposes)	-	0	Qualitative Test
7.2(Intended Use)	-	10000	Nil
7.3(Reasonably foreseeable misuse)	-	50000	Nil
8(Information for safety)	-	5000	Nil
8.1(General)	-	0	Qualitative Test
8.2(Small Cell and battery safety information)	-	0	Qualitative Test
9(Marking)	-	5000	Nil
9.1(Cell Marking)	-	0	Qualitative Test
9.2(Battery Marking)	-	0	Qualitative Test
9.3(Caution for ingestion of small cells and batteries)	-	0	Qualitative Test
9.4(Other information)	-	0	Qualitative Test
10(Packaging)	-	0	Qualitative Test

Complete

-
-

IS 16046 : Part 1 (2018)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	Qualitative test
5(General Safety Considerations)	-	0	Qualitative test
5.1(General)	-	0	Qualitative test
5.2(Insulation and Wiring)	-	0	Qualitative test
5.3(Venting)	-	0	Qualitative test
5.4(Temperature, Voltage and Current Management)	-	0	Qualitative test
5.5(Terminal Contacts)	-	0	Qualitative test
5.6(Assembly of Cells into batteries)	-	0	Qualitative test
5.7(Quality Plan)	-	0	Qualitative test
6(Tyoe Test amd Sample Size)	-	0	Qualitative test
7(Specific requirements and tests)	-	0	Qualitative test
7.1(Charging procedure for test purposes)	-	0	Qualitative test
7.2(Intended Use)	-	20000	Nil
7.3(Reasonably foreseeable misuse)	-	45000	Nil
8(Information for safety)	-	5000	Nil
8.1(General)	-	0	Nil
8.2(Small Cell and battery safety information)	-	0	Nil
9(Marking)	-	5000	Nil
9.1(Cell Marking)	-	0	Nil
9.2(Battery Marking)	-	0	Nil
9.4(Other information)	-	0	Nil
10(Packaging)	-	5000	Nil

Complete

-
-

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% Extra
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	375 GST @ 18% Extra

Complete

-
-

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

51500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	2500	10% Discount to bis
Cl 5.2(Cleaning and Disinfecting)	-	500	10% Discount to bis
Cl 5.3(Practical Performance Test)	-	6500	10% Discount to bis
Cl 5.4(Leakage)	-	10000	10% Discount to bis
Cl 5.5(Compatibility with Skin)	-	500	10% Discount to bis
Cl 5.6(Flammability)	-	3500	10% Discount to bis
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	6500	10% Discount to bis
Cl 5.8(Head Harness)	-	8000	10% Discount to bis
Cl 5.9(Field of Vision)	-	3000	10% Discount to bis
Cl 5.10(Inhalation and Exhalation Valves)	-	5000	10% Discount to bis
Cl 5.11(Breathing Resistance)	-	5000	10% Discount to bis
Cl 5.12(Clogging (Coal & Dolomite))	-	0	Nil
Cl 5.13(De-mountable Parts)	-	500	10% Discount to bis
5.1. 1(Components/ Straps)	-	0	NIL
5.1.2(Face Piece)	-	0	NIL
5.1.3(Material Requirements)	-	0	NIL
5.1.4(Metal Parts)	-	0	NIL
5.4.1.a(Total Inward Leakage (AR-5 Samples) )	-	0	NIL
5.4.1.a(Total Inward Leakage (TC-5 Samples) )	-	0	NIL
5.4.1.b(Total lnward Leakage (AR- 5 Samples) )	-	0	NIL
5.4.1.b(Total Inward Leakage (TC -5 Samples))	-	0	NIL
5.6(Flammability (AR-2 Samples) )	-	0	Nil
5.6(Flammability (TC- 2 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (AR-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (TC-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (SW-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (SW-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (SW-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (SW-3 Samples))	-	0	Nil
7.0(Instructions for Use)	-	0	Nil
6.2.2(Marking)	-	0	Nil
6.2.1(Marking)	-	0	Nil
6.1(Packing)	-	0	Nil
5.10.2.4(Exh. Valve Tensile Force (SW-1 Sample) )	-	0	Nil
5.10.2.4(Exh. Valve Tensile Force (AR-1 Sample) )	-	0	Nil
5.10.2.3(Exh. Valve Flow (TC-2 Samples))	-	0	Nil
5.10.2.3(Exh. Valve Flow (AR-1 Sample) )	-	0	Nil
5.10.2.2(Exhalation valve)	-	0	Nil
5.10.1(Inhalation valve)	-	0	Nil
5.8.1(Head Harness)	-	0	NIL
5.8.2(Head Harness)	-	0	NIL
5.11(Breathing Resistance Test (m bar) (SW-3 Samples) )	-	0	NIL
5.4.1(Total Inward Leakage (AR-5 Samples) )	-	0	NIL

Complete

-
-

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	500	GST @ 18% extra.
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	500	GST @ 18% extra.
4.7(pH value - ISO 787-9)	-	500	GST @ 18% extra.
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	500	GST @ 18% extra.
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	1000	GST @ 18% extra.
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	500	GST @ 18% extra.
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	500	GST @ 18% extra.

Complete

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra

Complete

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	27	GST@18% EXTRA
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	27	GST@18% EXTRA
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	30	GST@18% EXTRA
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	27	GST@18% EXTRA
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	27	GST@18% EXTRA
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	27	GST@18% EXTRA
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	27	GST@18% EXTRA
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	27	GST@18% EXTRA
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	27	GST@18% EXTRA
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	27	GST@18% EXTRA
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	27	GST@18% EXTRA
4.3.2 - 5.21( Expanding materials)	-	100	GST@18% EXTRA
4.4.1 - 5.2(Small parts-For children under 36 months)	-	100	GST@18% EXTRA
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	100	GST@18% EXTRA
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	20	GST@18% EXTRA
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	10	GST@18% EXTRA
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	10	GST@18% EXTRA
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	10	GST@18% EXTRA
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	10	GST@18% EXTRA
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	10	GST@18% EXTRA
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	10	GST@18% EXTRA
4.5.6(Shape, size and strength of certain toys-Balloons)	-	10	GST@18% EXTRA
4.5.7(Shape, size and strength of certain toys-Marbles)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	10	GST@18% EXTRA
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	10	GST@18% EXTRA
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	33	GST@18% EXTRA
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	33	GST@18% EXTRA
4.6.2(Edges-Functional sharp edges)	-	33	GST@18% EXTRA
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	33	GST@18% EXTRA
4.6.4( Edges-Edges on moulded toys)	-	33	GST@18% EXTRA
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	35	GST@18% EXTRA
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	50	GST@18% EXTRA
4.7.2 - a(Points-Functional sharp points)	-	50	GST@18% EXTRA
4.7.2 - b(Points-Functional sharp points)	-	50	GST@18% EXTRA
4.7.3 (Wooden toys)	-	50	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	34	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	33	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	33	GST@18% EXTRA
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	16	GST@18% EXTRA
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods)	-	14	GST@18% EXTRA
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	14	GST@18% EXTRA
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods-Spokes ends)	-	14	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	34	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	33	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	33	GST@18% EXTRA
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	4	GST@18% EXTRA
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	7	GST@18% EXTRA
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	4	GST@18% EXTRA
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	4	GST@18% EXTRA
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	4	GST@18% EXTRA
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	4	GST@18% EXTRA
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	4	GST@18% EXTRA
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	4	GST@18% EXTRA
4.11.6(Cords- Electrical cables)	-	4	GST@18% EXTRA
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	4	GST@18% EXTRA
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	4	GST@18% EXTRA
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	4	GST@18% EXTRA
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	4	GST@18% EXTRA
4.11.10(Cords-Cords on toy bags)	-	5	GST@18% EXTRA
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	10	GST@18% EXTRA
4.11.11( Cords, strings and lines for flying toys- )	-	10	GST@18% EXTRA
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	10	GST@18% EXTRA
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	8	GST@18% EXTRA
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	8	GST@18% EXTRA
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	8	GST@18% EXTRA
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	8	GST@18% EXTRA
4.12.3(Folding mechanisms-Hinge line clearance)	-	8	GST@18% EXTRA
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	14	GST@18% EXTRA
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	14	GST@18% EXTRA
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	14	GST@18% EXTRA
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	14	GST@18% EXTRA
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	14	GST@18% EXTRA
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	14	GST@18% EXTRA
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	16	GST@18% EXTRA
4.14(a)(Springs)	-	33	GST@18% EXTRA
4.14(b)(Springs)	-	33	GST@18% EXTRA
4.14(c)(Springs)	-	34	GST@18% EXTRA
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	33	GST@18% EXTRA
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	33	GST@18% EXTRA
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	33	GST@18% EXTRA
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	33	GST@18% EXTRA
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	33	GST@18% EXTRA
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	35	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-No of openings)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	3	GST@18% EXTRA
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	3	GST@18% EXTRA
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	3	GST@18% EXTRA
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	7	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head)	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	3	GST@18% EXTRA
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	50	GST@18% EXTRA
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	50	GST@18% EXTRA
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	5	GST@18% EXTRA
4.18.2(b)(Projectile toys-Projectiles)	-	5	GST@18% EXTRA
4.18.2(c)(Projectile toys-Projectiles)	-	5	GST@18% EXTRA
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	5	GST@18% EXTRA
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	5	GST@18% EXTRA
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	5	GST@18% EXTRA
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	5	GST@18% EXTRA
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	5	GST@18% EXTRA
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	5	GST@18% EXTRA
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	5	GST@18% EXTRA
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	5	GST@18% EXTRA
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	5	GST@18% EXTRA
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	5	GST@18% EXTRA
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	5	GST@18% EXTRA
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	5	GST@18% EXTRA
4.19(Rotors and propellers)	-	100	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.21(a)(Braking)	-	25	GST@18% EXTRA
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	25	GST@18% EXTRA
4.21(a)(braking)	-	25	GST@18% EXTRA
4.21(b)(braking)	-	25	GST@18% EXTRA
4.22.1(Toy bicycles-Instructions for use)	-	28	GST@18% EXTRA
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	28	GST@18% EXTRA
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	28	GST@18% EXTRA
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	28	GST@18% EXTRA
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	28	GST@18% EXTRA
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	28	GST@18% EXTRA
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	32	GST@18% EXTRA
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	100	GST@18% EXTRA
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	20	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	16	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	16	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	16	GST@18% EXTRA
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	16	GST@18% EXTRA
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	16	GST@18% EXTRA
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	100	GST@18% EXTRA
4.25(Liquid-filled toys)	-	100	GST@18% EXTRA
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	50	GST@18% EXTRA
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	50	GST@18% EXTRA
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	50	GST@18% EXTRA
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	50	GST@18% EXTRA
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	100	GST@18% EXTRA
4.28( Percussion caps specifically designed for use in toys)	-	50	GST@18% EXTRA
4.28( Percussion caps specifically designed for use in toys)	-	50	GST@18% EXTRA
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	16	GST@18% EXTRA
4.30.2(Toy scooters-Warnings and instructions for use)	-	20	GST@18% EXTRA
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	20	GST@18% EXTRA
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	20	GST@18% EXTRA
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	20	GST@18% EXTRA
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	20	GST@18% EXTRA
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	20	GST@18% EXTRA
4.30.6 ( Toy scooters-Braking)	-	20	GST@18% EXTRA
4.30.6 ( Toy scooters-Braking)	-	20	GST@18% EXTRA
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	40	GST@18% EXTRA
4.30.7( Toy scooters-Wheel size(diameter))	-	20	GST@18% EXTRA
4.30.8(Toy scooters-Projections)	-	40	GST@18% EXTRA
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	20	GST@18% EXTRA
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	20	GST@18% EXTRA
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	12	GST@18% EXTRA
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	12	GST@18% EXTRA
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	12	GST@18% EXTRA
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	12	GST@18% EXTRA
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	12	GST@18% EXTRA
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	12	GST@18% EXTRA
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	14	GST@18% EXTRA
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	14	GST@18% EXTRA
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	50	GST@18% EXTRA
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	50	GST@18% EXTRA
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	100	GST@18% EXTRA
4.34(Sledges and toboggans with cords for pulling)	-	100	GST@18% EXTRA
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	375	GST@18% EXTRA
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	130	GST@18% EXTRA
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	130	GST@18% EXTRA
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	120	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	120	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	120	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1500	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1000	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1000	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1500	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	120	GST@18% EXTRA
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.10(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	1000	GST@18% EXTRA
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	500	GST@18% EXTRA
9873 (Part - 4) 4.1.1 and 6.2.1( Strength of toys other than swings)	-	2000	GST@18% EXTRA
9873 (Part - 4) 4.1.2 and A.4.1.2(Maximum height)	-	500	GST@18% EXTRA
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	250	GST@18% EXTRA
9873 (Part - 7) 4.7(pH value - ISO 787-9)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	1002	GST@18% EXTRA
9873 (Part - 4) 4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	200	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.1.4.4 and 6.7.2 (Motion rides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.4.5 (Slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	784	GST@18% EXTRA
9873 (Part - 7) 4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	150	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	150	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	300	GST@18% EXTRA
9873 (Part - 4) 4.3(Rung ladders, stepladders and stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 c(The surface of the tread shall not be slippery)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of stepladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of rung ladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.3 g(A means of continuous hand support from a height of 760 mm)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.4.1 (Head and neck entrapment)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.2(Entrapment of clothing and hair)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.3(Entrapment of feet)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.4(Entrapment of fingers)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	600	GST@18% EXTRA
9873 (Part - 4) 4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	700	GST@18% EXTRA
9873 (Part - 4) 4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	700	GST@18% EXTRA
9873 (Part - 4) 4.6.1 and A.4.6.(Stability of slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.3.1(Swings intended for children under 36 months)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.3.2(Toddler swings without a crossbeam)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Free swinging elements)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Elements excluding free swinging)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	120	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 d and A.4.7.8(Straps and chains - Width)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 d and A.4.7.8(Accessible chains)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws )	-	500	GST@18% EXTRA
9874 (Part - 4) 4.9(Carousels and rocking toys)	-	700	GST@18% EXTRA
9874 (Part - 4) 4.9(Free height of fall for carousels and rocking toys)	-	600	GST@18% EXTRA
9874 (Part - 4) 4.10.1 and A.4.10(Inflatable activity toys - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 and A.4.10(Safe collapse)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	100	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.11.1(Paddling pools - General)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.2(Edges, points, and small parts)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.2(Edges, points, and small parts)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.3(Paddling pools with inflatable walls)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.3(Paddling pools with inflatable walls)	-	320	GST@18% EXTRA
9874 (Part - 4) 5.1(Labelling)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.2(Assembly and installation instructions)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.3(Maintenance instructions)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.4(Warnings)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	250	GST@18% EXTRA
9874 (Part - 4) 4.9(Carousels and rocking toys)	-	700	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9873 (Part - 1) 4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	0	GST@18% EXTRA
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	0	GST@18% EXTRA
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	0	GST@18% EXTRA
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	0	GST@18% EXTRA
4.1(Normal use)	-	0	GST@18% EXTRA
5.24.6.1(Tension Test General procedure)	-	0	GST@18% EXTRA
4.3.1(Material quality)	-	0	GST@18% EXTRA

Complete

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6.5(MIGRATION TEST)	-	1000	10% discount to BIS
4.6.6(PORTABILITY TEST)	-	1000	10% discount to BIS
4.6.2(TRANSPARANCY)	-	500	10% discount to BIS
4.6.3(LEAKAGE TEST)	-	1000	10% discount to BIS
4.6.4(DROP TEST)	-	500	10% discount to BIS
4.0 (chem)(MATERIAL)	-	400	10% discount to BIS
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	200	10% discount to BIS
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	200	10% discount to BIS
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	200	10% discount to BIS
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	0	NIL
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	0	NIL
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0	NIL
4.4 (b)(Brimful Capacity)	-	100	10% discount to BIS
4.1(Material )	-	100	10% discount to BIS
Cl. 4.4 (a)(Capacity)	-	100	10% discount to BIS
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	0	NIL
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	100	10% discount to BIS
4.3 (chem)(Workmanship, Finish & Appearance)	-	100	10% discount to BIS
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	NIL
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	NIL
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	Nil
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	NIL
4.6.5.1 (chem)(Colour migration (Container))	-	0	NIL
4.6.5.1 (chem)(Colour migration (Caps))	-	0	NIL

Complete

-
-

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table-1 i(Colour)	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 ii(Odour)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 iii(Taste)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 iv(Turbidity)	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 v(Total dissolved solids)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 vi(pH)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 i(Nitrate (as NO3))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 ii(Nitrite (as NO2))	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 iii(Sulphide (as H2S))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 iv(Manganese (as Mn))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 v(Copper (as Cu))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 vi(Zinc (as Zn))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 vii(Flouride (as F))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 viii(Barium (as Ba))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 ix(Antimony (as Sb))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 x(Borates (as B))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xi(Silver (as Ag))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xii(Chloride (as Cl))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xiii(Sulphate (as SO4),)	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xiv(Magnesium (as Mg))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xv(Calcium (as Ca))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xvi(Sodium (as Na))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xviii(Selenium (as Se))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xix(Mineral Oil)	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	1000	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 i(Arsenic (as As))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 ii(Cadmium (as Cd))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 iii(Cyanide (as CN))	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 iv(Chromium (as Cr))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 v(Mercury (as Hg))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 vi(Lead (as Pb)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 vii(Nickel (as Ni))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	1500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	1500	20% Discount to BIS. GST @18% will be charged extra.
6.3(α-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(β-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(δ-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(γ-HCH (Lindane))	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(α Endosulfan)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(β Endosulfan)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Endosulfan Sulphate)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDD)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p,p DDD)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDE)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p, DDE)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDT)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p,p DDT)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Alachlor)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Butachlor)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Chlorpyrifos)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Atrazine)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Aldrin)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Dieldrin)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(2,4-D)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Ethion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Monocrotophos)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Phorate)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(phorate sulphone)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Phorate sulphoxide)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Methyl Paraoxon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Methyl Parathion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Malaoxon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Malathion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Isoproturon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.1.2(Coliform , bacteria)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.1.3(Faecal Streptococci )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.3(Staphylococcus Aureus)	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.4(Sulphite Reducing Anaerobes )	-	400	20% Discount to BIS. GST @18% will be charged extra.
6.1.5(Pseudomonas Aeruginosa )	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.1.6(Yeast and Mould )	-	400	20% Discount to BIS. GST @18% will be charged extra.
6.1.7(Salmonella )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.7(Shigella)	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.8(Vibrio cholera )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.8(Vibrio parahemolyticus)	-	200	20% Discount to BIS. GST @18% will be charged extra.

Complete

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	0	18% GST EXTRA
6.1.4(Odour)	-	0	18% GST EXTRA
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	500	18% GST EXTRA
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	500	18% GST EXTRA
5(Material)	-	0	18% GST EXTRA
6.1.1(Description)	-	0	18% GST EXTRA
6.1.2(Film Form)	-	0	18% GST EXTRA
6.1.3(Winding of the Film )	-	0	18% GST EXTRA
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	0	18% GST EXTRA
6.1.6(Width)	-	0	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	400	18% GST EXTRA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	400	18% GST EXTRA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	250	18% GST EXTRA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	250	18% GST EXTRA
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	500	18% GST EXTRA
7.2 Annex F(Stack Load test)	-	500	18% GST EXTRA
7.3 Annex G(Drop test )	-	500	18% GST EXTRA
7.4 Annex H(Ink adhesion test for printed pouches)	-	300	18% GST EXTRA
7.5 Annex J(Product resistance test for printed pouches)	-	300	18% GST EXTRA
Cl. 7.1(Vibration Leakage Test)	-	500	18% GST EXTRA
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2000	18% GST EXTRA

Complete

-
-

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

36850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(SIZES, Large)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(SIZES, Extra Large)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(SIZES, XXL)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	350	GST@18% extra
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	1000	GST@18% extra
Cl 5(Absorbent Capacity, Regular )	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(Absorbent Capacity, Large)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(Absorbent Capacity, Extra Large)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 5(Absorbent Capacity, XXL)	-	1500	Rs. 1500 will be charged for applicable size of sample received. GST@18% extra
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	6000	GST@18% extra
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	6000	GST@18% extra

Complete

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-2 xxv (Bromates (as BrO3),)	-	2000	20% Discount for BIS. 18% GST will be charged extra.
5.2.9(Vibrio parahaemolyticus)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.9(Vibrio cholera)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.8(Shigella)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.8(Salmonella)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 i (Colour)	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 ii (Odour)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 iii (Taste)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 iv(Turbidity)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 v (Total dissolved solids)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1vi (pH)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 i (Barium (as Ba))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 ii (Copper (as Cu))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 iii (Iron (as Fe),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 iv (Manganese (as Mn))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 v (Nitrate (as NO3))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 vi (Nitrite (as NO2))	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2vii (Fluoride (as F))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 viii (Zinc (as Zn))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 ix (Silver (as Ag))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 x (Aluminium (as Al))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xi (Chloride (as Cl))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xii (Selenium (as Se),)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xiii (Sulphate (as SO4),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xv (Calcium (as Ca),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xvi (Magnesium (as Mg))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xvii (Sodium (as Na))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xviii (Residual free chlorine)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xx (Mineral oil)	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	1000	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxii (Sulphide (as H2S))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxiii (Antimony (as Sb))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxiv (Borates (as B))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 i (Mercury (as Hg))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 ii (Cadmium (as Cd))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 iv (Cyanide (as CN))	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 v (Lead (as Pb))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 vi(Chromium (as Cr))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 vii (Nickel (as Ni))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 iii (Arsenic (as As))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	1500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	1500	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(alpha-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(beta-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Gamma-HCH (Lindane))	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Delta-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(alpha-Endosulfan)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(beta-Endosulfan)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Endosulfan Sulphate)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDD)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDD)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDE)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDE)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDT)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDT)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Alachlor)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Butachlor)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Chlorpyrifos)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Atrazine)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Aldrin)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Dieldrin)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(2,4-D)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Ethion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Monocrotophos)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Phorate)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Phorate sulphoxide)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(phorate sulphone)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Malaoxon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Malathion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Methyl Paraoxon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Methyl Parathion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Isoproturon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.2.7(Yeast and Mould)	-	400	20% Discount for BIS. 18% GST will be charged extra.
5.2.6(Aerobic Microbial Count at 37°C)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.6(Aerobic Microbial Count at 20-22°C)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.5(Pseudomonas Aeruginosa)	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.2.4(Sulphite Reducing Anaerobes)	-	400	20% Discount for BIS. 18% GST will be charged extra.
5.2.3(Staphylococcus Aureus)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.3(Faecal Streptococci)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.2(Coliform)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	350	20% Discount for BIS. 18% GST will be charged extra.

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE, bhadhaurgarh

198-199, M.I.E, PHASE-I, BAHADURGARH, HARYANA-124507, Bahadurgarh, Jhajjar, Haryana, 124507

9711227171 [email protected]

Scope List