BIS - LIMS (Laboratory Information Management System)

MSME TESTING CENTRE (WR), MUMBAI

MSME-DI campus, Kurla - Andheri road, Sakinaka,, Mumbai, Mumbai Suburban, Maharashtra, 400072

9527242663 [email protected]

Scope List

Reset

12 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(marking)	-	1800	1800
9.0(Dimensions)	-	1800	1800
10.0(Protection against electric shock)	-	1800	1800
11.0(PROVISION FOR EARTHING)	-	1800	1800
12.0(Constructions)	-	1800	1800
13.0(Resistance to ageing)	-	3000	3000
18.0(Resistance to insulating material to abnormal heat and fire)	-	3000	3000
13.0(Resistance to ingress of solid objects)	-	3500	3500
13.0(Resistance toharmful ingress of water)	-	3000	3000
15.0(Mechanical strength)	-	1800	1800
16.0(resistance to heat)	-	1800	1800
20.0(Resistance to corrosion)	-	1800	1800
19.0(Resistance to tracking)	-	1800	1800

Complete

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC insulated unsheathed & sheathed cables/cords 110V

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tensile test (for Al)- After Stranding)	-	1800	Type test: i)Single core/Unsheathed/01:Rs.12,000/-, ii) Single core/sheathed/01:Rs.16000/- , iii)Single core/Unsheathed/FR:Rs.18000/-, iv)Single core/sheathed/FR:Rs.22000/-
4.1(Tensile test (for Al)-Before Stranding)	-	1800	Acceptance test: i)Single core/Unsheathed/01:Rs.9,000/-, ii) Single core/sheathed/01:Rs.12000/- , iii)Single core/Unsheathed/FR:Rs.13500/-, iv)Single core/sheathed/FR:Rs.16500/-
4.1(Annealing test (for copper))	-	1800	For Multicore cables:25%extra for each additional core on single core rate
4.1(Wrapping test (for Al))	-	1500	-
4.2(Conductor resistance test)	-	1800	-
Table 1(Category Code)	-	5000	For Cat.02 Rs.5000/- additional on above test charge
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1800	1800
table 1 e) 3) (IR constant- Room temp )	-	1800	1800
table 1 e) 3) (IR constant- max. Temp)	-	1800	1800
5.1(Insulation)	-	2000	2000
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1800	1800
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	3500	3500
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1800	1800
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	2000	2000
Table 1 iii) d) 8)(Cold bend for sheath)	-	3500	3500
Table 1 iii) d) 9)(Cold impact for sheath)	-	3500	3500
10.4(Flammability test- Unaffected portion)	-	1800	1800
10.5(Oxygen index)	-	3500	3500
10.7(Temperature index)	-	3500	3500
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3000	3000
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	2000
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	3500	3500
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1800	1800
10.1(HV (water immersion))	-	4000	4000
10.2(HV (room temperature))	-	1800	1800
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	5000	5000

Complete

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Domestic Electric Food Mixers (Liquidizers & Grinders)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	1800	1800
8( Protection Against Electric Shock, IS 302-1)	-	1800	1800
9(Starting, IS 302-1)	-	1800	1800
10(Power Input and Current, IS 302-1)	-	1800	1800
11(Heating, IS 302-1)	-	2500	2500
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
15.1(Moisture Resistance, IS 302-1)	-	3000	3000
15.2(Moisture Resistance-Spillage test)	-	3000	3000
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
19(Abnormal Operation, IS 302-1)	-	1800	1800
21(Mechanical Strength, IS 302-1)	-	1800	1800
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1800	1800
27(Provision for Earthing, IS 302-1)	-	1800	1800
28(Screws & Connections, IS 302-1)	-	1800	1800
29(Clearances and Distances through Insulation, IS 302-1)	-	1800	1800
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	3000	3000
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	2500	2500
34.3(Whisking egg whites )	-	2500	2500
35(Temperature withstand test for bowl)	-	1500	1500
36(Test for controls )	-	1800	1800

Complete

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

Switches for Domestic & similar purpose

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	1800	Type test:Rs.14,000/- for 6AX/10A, Rs.16000/- for 16AX/20A for BIS SAMPLES Rs.7,462/- for 6AX/10A, Rs.8,775/- for 16AX/20A
7(Classification)	-	1800	Type test:Rs.14,000/- for 6AX/10A, Rs.16000/- for 16AX/20A for BIS SAMPLES Rs.7,462/- for 6AX/10A, Rs.8,775/- for 16AX/20A
10(Protection against Electric Shock)	-	1800	1800
11.1(Provision for earthing)	-	1800	1800
12(Terminals)	-	2500	2500
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	2500	2500
14(Mechanism [Cl. 14])	-	3000	3000
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	3000	3000
16.1(Insulation resistance [Cl. 16.1])	-	3000	3000
16.2( Electric Strength [Cl. 16.2])	-	3000	3000
17(Temperature- rise [Cl. 17])	-	2500	2500
18(Marking and breaking Capacity[Cl. 18])	-	2000	2000
19(Normal Operation [Cl. 19] a) General & Operation)	-	4000	4000
19(b) Electric Strength)	-	1800	1800
19(c)Temperature-rise )	-	4000	4000
20(Mechanical Strength Test [Cl. 20])	-	1800	1800
21(Resistance to Heat [Cl.21])	-	2500	2500
22(Screw, Current Carrying Part And Connection [Cl.22])	-	1800	1800
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	1800	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	4000	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	4000	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	2500	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	1800	1800
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	1800	-

Complete

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self ballasted LED Lamps for general lighting service

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1800	1800
6(Interchangeability)	-	1800	1800
7(Protection against accidental contact with live parts)	-	1800	1800
8(Insulation Resistance and Electric Strength)	-	6000	6000
9(MECHANICAL STRENGTH)	-	2500	2500
10(cap temperature)	-	5000	5000
11(Resistance to Heat)	-	1800	1800
12(Resistance to Flame and Ignition)	-	2500	2500
13(Fault conditions)	-	1800	1800
14(Creepage distance and clearances)	-	1800	1800

Complete

-
-

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

upto & including 250V & rated current upto 16A

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.1(Accessories Classification)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.2(Accessories Classification)	-	1800	1800
7.1.3(Accessories Classification)	-	1800	1800
7.1.4(Accessories Classification)	-	1800	1800
7.1.5(Accessories Classification)	-	1800	1800
7.2.1(Socket-Outlets Classification)	-	1800	1800
7.2.2(Socket-Outlets Classification)	-	1800	1800
7.2.3(Socket-Outlets Classification)	-	1800	1800
7.2.4(Socket-Outlets Classification)	-	1800	1800
7.3(Plug Classification)	-	1800	1800
8.1(MARKING)	-	1800	1800
8.8(MARKING)	-	1800	1800
8.9(MARKING)	-	1800	1800
9.1(CHECKING OF DIMENSIONS)	-	1800	1800
9.2(CHECKING OF DIMENSIONS)	-	1800	1800
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
11.1(PROVISIONS FOR EARTHING)	-	1800	1800
11.2(PROVISIONS FOR EARTHING)	-	1800	1800
11.3(PROVISIONS FOR EARTHING)	-	1800	1800
11.4(PROVISIONS FOR EARTHING)	-	1800	1800
11.5(PROVISIONS FOR EARTHING)	-	1800	1800
11.6(PROVISIONS FOR EARTHING)	-	1800	1800
12.1.1(TERMINALS)	-	2500	2500
12.1.2(TERMINALS)	-	2500	2500
12.2.1(TERMINALS)	-	2500	-
12.2.2(TERMINALS)	-	2500	2500
12.2.3(TERMINALS)	-	2500	2500
12.2.4(TERMINALS)	-	2500	2500
12.2.5(TERMINALS)	-	2500	2500
12.2.6(TERMINALS)	-	2500	2500
12.2.7(TERMINALS)	-	2500	2500
12.2.8(TERMINALS)	-	2500	2500
12.2.9(TERMINALS)	-	2500	2500
12.2.10(TERMINALS)	-	2500	2500
12.2.11(TERMINALS)	-	2500	2500
12.3.1(TERMINALS)	-	2500	2500
12.3.2(TERMINALS)	-	2500	2500
12.3.4(TERMINALS)	-	2500	2500
12.3.5(TERMINALS)	-	2500	2500
12.3.6(TERMINALS)	-	2500	2500
12.3.7(TERMINALS)	-	2500	2500
12.3.8(TERMINALS)	-	2500	2500
12.3.9(TERMINALS)	-	2500	2500
12.3.10(TERMINALS)	-	2500	2500
12.3.11(TERMINALS)	-	2500	2500
12.3.12(TERMINALS)	-	2500	2500
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
15(INTERLOCKED SOCKET-OUTLETS)	-	2500	2500
16.1(RESISTANCE TO AGEING,)	-	3000	3000
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	3000	3000
16.3(Resistance to Humidity)	-	3000	3000
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
18(OPERATION OF EARTHING CONTACTS)	-	1800	1800
19(TEMPERATURE RISE)	-	2500	2500
20(BREAKING CAPACITY)	-	2000	2000
21(NORMAL OPERATION)	-	4000	4000
22.1(Verification of the Maximum Withdrawal Force)	-	1800	1800
22.2(Verification of Minimum Withdrawal Force)	-	1800	1800
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1800	1800
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1800	1800
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	1800	1800
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	1800	1800
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	2500	2500
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	2500	2500
25.4(RESISTANCE TO HEAT )	-	2500	2500
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	2500	2500
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	2500	2500
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	2500	2500
29(RESISTANCE TO RUSTING)	-	1800	1800
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1800	1800
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1800	1800
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1800	1800
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1800	1800

Complete

-
-

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	1000	1000
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	1000	1000
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	1000	1000
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	1000	1000
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	1000	1000
9.1(Construction)	-	2000	2000
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	2000	2000
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	2000	2000
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	2000	2000
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	2000	2000
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	2000	2000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000
10.3(Impact Test [ Cl.10.3 ])	-	2000	2000
10.4(Linear Deflection Test [ Cl.10.4 ])	-	2000	2000
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	1000
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	3000	3000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000

Complete

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.1(Marking)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	1000	1000
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	1000
7.1.1 Table-2(Length of Socket end)	-	1000	1000
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	1000
7.2(Minimum inside diameter of conduit)	-	1000	1000
7.3(Length of conduit)	-	1000	1000
7.4(Unifomity of The wall Thickness)	-	1000	1000
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	2000	2000
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	2000
10(Resistance to Heat -Ball presure test)	-	2000	2000
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	1000
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	3000	3000
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	3000	3000

Complete

-
-

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	1000	1000
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	2000	2000
10(Resistance to Heat -IS:3419)	-	2000	2000
11(Resistance to Burning - IS 3419)	-	2000	2000
12(Moisture Absorption - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	2000	2000
14.1(Copper Test - IS 3419)	-	2000	2000
15, 15.3(Resistance to Oil - IS 3419)	-	2000	2000
15,15.4(Resistance to Oil - IS 3419)	-	2000	2000
16- Appendix-A(Resistance to Impact -IS 3419)	-	2000	2000
17.2(Electric Strength - IS 3419)	-	2000	2000
17.3(Insulation Resistance - IS 3419)	-	2000	2000

Complete

-
-

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Discharge capacity from 5liter to 10liter

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Cistern)	-	2000	2000
Cl 5.2(Cover)	-	2000	2000
Cl 5.3(Flush pipe)	-	2000	2000
Cl 5.3.1(Flush pipe connection to cistern.)	-	2000	2000
Cl 5.4(Inlet and overflow holes)	-	2000	2000
Cl 5.5(Float valve)	-	2000	2000
Cl 5.6(Operating mechanism / lever)	-	2000	2000
(Cl.6)(Finish)	-	1000	1000
(Cl 9.3)(Endurance test)	-	5000	5000
Cl 7.6 & 9.2(Discharge rate )	-	1000	1000

Complete

-
-

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

LD-2.5, MD-10,HD-20, EHD-35

9000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 and Table 1(Dimensions of Frame - A)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - B)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - C)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - D)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - E)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - F)	-	500	Per single dim.500
5.2(Dimensions of cover- Diameter)	-	500	Per single dim.500
5.2(Clearance at top between the frame and the cover all round the periphery)	-	500	Per single dim.500
5.2(Top surface ofthe frame and cover is in level)	-	500	Per single dim.500
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	500	Per single dim.500
5.2 and Fig 1(Clear cover to reinforcement)	-	500	Per single dim.500
5.2 and Fig 1(Distance of housing from the edge)	-	500	Per single dim.500
7.4.1(Edge Protection and Finishing - Frame)	-	1500	1500
7.4.2(Edge Protection and Finishing - Cover)	-	1500	1500
8(LIFTING HOOKS)	-	500	Per single dim.500
9.3 and Table and Annex C(Load Test)	-	2500	2500

Complete

-
-

IS 651 (2007)

Glazed stoneware pipes and fittings - Specification (Sixth Revision)

Class: SP1, SP2 & SP3

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(GENERAL QUALITY)	-	500	Visual inspection
7.2(Hydraulic Test)	-	2500	Hydraulic Test
7.3(Absorption Test)	-	1500	Absorption Test
Clause 7.4(Acid Resistance Test)	-	1000	Test for Acid Resistance
Clause 7.5(Alkali Resistance Test)	-	1000	Test for Alkali Resistance

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

MSME TESTING CENTRE (WR), MUMBAI

MSME-DI campus, Kurla - Andheri road, Sakinaka,, Mumbai, Mumbai Suburban, Maharashtra, 400072

9527242663 [email protected]

Scope List