BIS - LIMS (Laboratory Information Management System)

ELECTRONICS REGIONAL TEST LABORATORY (EAST)

BLOCK-DN;SECTOR-V;SALT LAKE CITY KOLKATA-700 091., KOLKATA, 24 Paraganas North, West Bengal, 700091

9830786241 [email protected]

Scope List

Reset

15 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS/IEC 60079 : Part 1 (2014)

Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Level of protection (equipment protection level, EPL))	-	0	-
4.1(General)	-	0	-
4.4(Requirements for level of protection “dc”)	-	0	-
4.4.1(General)	-	0	-
4.4.2(Construction of “dc” devices)	-	0	-
4.4.2.1(General)	-	0	-
4.4.2.2(Free internal volume)	-	0	-
4.4.2.3(Seal protection)	-	0	-
4.4.2.4(Continuous operating temperature (COT) requirements)	-	0	-
4.4.2.5(Ratings)	-	0	-
4.4.3(Tests for “dc” devices)	-	0	-
5(Flameproof joints)	-	12000	Test charge includes all clauses under Cl. 5
5.1(General requirements)	-	0	-
5.2(Non-threaded joints)	-	0	-
5.2.1(Width of joints (L))	-	0	-
5.2.2(Gap (i))	-	0	-
5.2.3(Spigot joints)	-	0	-
5.2.4(Holes in joint surfaces)	-	0	-
5.2.5(Conical joints)	-	0	-
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	-
5.2.7(Flanged joints for acetylene atmospheres)	-	0	-
5.2.8(Serrated joints)	-	0	-
5.2.9(Multi-step joints)	-	0	-
5.3(Threaded joints)	-	0	-
5.4(Gaskets (including O-rings))	-	0	-
5.5(Equipment using capillaries)	-	0	-
6(Sealed joints)	-	333600	Test charge includes all clauses under cl. 6
6.1(Cemented joints)	-	0	-
6.1.1(General)	-	0	-
6.1.2(Mechanical strength)	-	0	-
6.1.3(Width of cemented joints)	-	0	-
6.2(Fused glass joints)	-	0	-
6.2.2(Width of fused glass joints)	-	0	-
7(Operating rods)	-	0	-
8.1.1(Joints of shafts)	-	0	-
8.1.2(Cylindrical joints)	-	0	-
8.1.3(Labyrinth joints)	-	0	-
8.1.4(Joints with floating glands)	-	0	-
8.2.1(Sleeve bearings)	-	0	-
8.2.2(Rolling-element bearings)	-	0	-
9(Light-transmitting parts)	-	0	-
10.2(Openings for breathing or draining)	-	0	Facility not available
10.3(Composition limits)	-	0	Facility not available
10.4(Dimensions)	-	0	Facility not available
10.5(Elements with measurable paths)	-	0	Facility not available
10.6(Elements with non-measurable paths)	-	0	Facility not available
10.7.1(Removable devices)	-	0	Facility not available
10.7.2(Mounting arrangements of the elements)	-	0	Facility not available
10.8(Mechanical strength)	-	0	Facility not available
10.9(Breathing devices and draining devices when used as Ex components)	-	0	Facility not available
10.9.1(General)	-	0	Facility not available
10.9.2(Mounting arrangements of the elements and components)	-	0	Facility not available
10.9.3(Thermal tests - Test procedure as per Cl 10.9.3.2.2)	-	0	Facility not available
10.9.3.3(Test for non-transmission of an internal ignition - Test procedure as per Cl 10.9.3.3.2)	-	0	Facility not available
10.9.3.4(Test of the ability of the breathing and draining device to withstand pressure -Test procedure as per Cl 10.9.3.4.1)	-	0	Facility not available
10.9.4(Ex component certificate)	-	0	Facility not available
11.1(Fasteners and openings)	-	0	-
11.2(Fasteners and openings)	-	0	-
11.3(Fasteners and openings)	-	0	-
11.4(Fasteners and openings)	-	0	-
11.5(Fasteners and openings)	-	0	-
11.6(Fasteners and openings)	-	0	-
11.7(Fasteners and openings)	-	0	-
11.8(Fasteners and openings)	-	0	-
11.9(Fasteners and openings)	-	0	-
12.1(Materials)	-	0	-
12.2(Materials)	-	0	-
12.3(Materials)	-	0	-
12.4(Materials)	-	0	-
12.5(Materials)	-	0	-
12.6(Materials)	-	0	-
12.7(Materials)	-	0	-
12.8(Materials)	-	0	-
13.1(Entries for flameproof enclosures)	-	0	-
13.2(Threaded holes)	-	0	-
13.3(Non-threaded holes (for Group I only))	-	0	-
13.4(Cable glands)	-	0	-
13.5.1(Conduit sealing devices)	-	0	-
13.5.2(Conduit sealing devices)	-	0	-
13.5.3(Conduit sealing devices)	-	0	-
13.6.1(Plugs and sockets and cable couplers)	-	3000	Test charge includes all clauses under cl. no. 13.6
13.6.2(Plugs and sockets and cable couplers)	-	0	-
13.6.3(Plugs and sockets and cable couplers)	-	0	-
13.6.4(Plugs and sockets and cable couplers)	-	0	-
13.6.5(Plugs and sockets and cable couplers)	-	0	-
13.7(Bushings)	-	0	-
13.8(Blanking elements)	-	0	-
15.2.1(Tests of ability of the enclosure to withstand pressure)	-	0	-
15.2.2(Determination of explosion pressure (reference pressure))	-	45000	-
15.2.3.2(Overpressure test – First method (static))	-	7500	-
15.3.1(Test for non-transmission of an internal ignition)	-	0	-
15.3.2(Electrical equipment of Groups I, IIA and IIB)	-	30000	-
15.3.3(Electrical equipment of Group lIC)	-	22500	-
15.5(Tests for “dc” devices - Test procedure as per Cl 15.5.3.2)	-	45000	-
17(Switchgear for Group I)	-	0	-
17.2.1(Means of isolation)	-	0	-
17.2.2(Means of isolation)	-	0	-
17.2.3(Means of isolation)	-	0	-
17.2.4(Means of isolation)	-	0	-
17.3(Doors or covers)	-	0	-
17.3.1(Quick-acting doors or covers)	-	0	-
17.3.2(Doors or covers fixed by screws)	-	0	-
17.3.3(Threaded doors or covers)	-	0	-
18(Lampholders and Iamp caps)	-	0	-
18.2(Device preventing lamps working loose)	-	0	-
18.3.1(Holders and caps for lamps with cylindrical caps)	-	0	-
18.3.2(Holders and caps for lamps with cylindrical caps)	-	0	-
18.4.1(Holders for lamps with threaded caps)	-	0	-
18.4.2(Holders for lamps with threaded caps)	-	0	-
18.4.3(Holders for lamps with threaded caps)	-	0	-
19.1(Non-metallic enclosures and non-metallic parts of enclosures)	-	0	-
19.2(Resistance to tracking and creepage distances on internal surfaces of the enclosure walls)	-	0	-
19.4(Test of erosion by flame)	-	30000	-
20(Marking)	-	0	-
20.1(General)	-	0	-
20.2(Caution and warning markings)	-	0	-
20.3(Informative markings)	-	0	-
21(Instructions)	-	0	-
4.3(Requirements for level of protection “db”)	-	0	-

Complete

19 Apr, 2021

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

110500 View breakup
-

Clause No.	Exclusion	Remark
1.5(Components)	-	-
1.6(Power interface .)	-	-
1.7(Markings and instructions)	-	-
2.1(Protection from electric shock and energy hazards)	-	-
2.2(SELV circuits)	-	-
2.3(TNV circuits)	-	-
2.4(Limited current circuits)	-	-
2.5(Limited power sources .)	-	-
2.6(Provisions for earthing and bonding)	-	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	-
2.8(Safety interlocks)	-	-
2.9(Electrical insulation)	-	-
2.10(Clearances, creepage distances and distances through insulation)	-	-
3.1(General)	-	-
3.2(Connection to a mains supply)	-	-
3.3(Wiring terminals for connection of external conductors)	-	-
3.4(Disconnection from the mains supply)	-	-
3.5(Interconnection of equipment)	-	-
4.1(Stability)	-	-
4.2(Mechanical strength)	-	-
4.3(Design and construction)	-	-
4.4(Protection against hazardous moving parts)	-	-
4.5(Thermal requirements)	-	-
4.6(Openings in enclosures)	-	-
4.7(Resistance to fire)	-	-
5.1(Touch current and protective conductor curren)	-	-
5.2(Electric strength)	-	-
5.3(Abnormal operating and fault conditions)	-	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	-
6.3(Protection of the telecommunication wiring system from overheating)	-	-
7.1(General)	-	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	-
7.4(Insulation between primary circuits and cable distribution systems)	-	-
1.5(Components)	-	-
2.8.2/2.8.5(Interlock switches)	-	-
2.8.7(Switches and Relay)	-	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	-
2.10.5.4(Opto-coupler)	-	-
2.10.5.6(Thin sheet materials)	-	-
2.10.5.11(SMPS Transformer and Inductor)	-	-
2.10.5.12(Wires in wound components)	-	-
2.10.5.13(Winding wire)	-	-
2.10.5.14(Additional insulation in wound components)	-	-
2.10.6(PCB material)	-	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	-
2.10.8.4(Abrasion resistance test)	-	-
2.10.9(Thermal Cycling)	-	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	-
2.10.12(Enclosed and sealed parts)	-	-
3.1.4(Internal wire)	-	-
3.2.4(Appliance inlet /connector)	-	-
3.2.4(Appliance inlet /connector)	-	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	-
4.2.8(Cathode Ray Tubes)	-	-
4.3.8(Batteries)	-	-
4.3.10(Dust, powders, liquids and gases)	-	-
4.3.11(Containers for liquids or gases)	-	-
4.3.12(Flammable liquids)	-	-
4.3.13.2(Ionizing radiation)	-	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	-
4.3.13.5(LED, laser class)	-	-
Annex A3(Hot flaming oil test)	-	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	-
Annex K(Thermal Control)	-	-
Annex Q(Voltage Dependent Resistors)	-	-
1()	-	-
Annex B(Motor tests under abnormal conditions)	-	-
Annex C(Transformers)	-	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	-
Annex EE(Household and home/ office document/ media shredders)	-	-

Complete

19 Apr, 2021

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

45500.00 View breakup
-

Clause No.	Exclusion	Remark
4(General Test Requireements)	-	-
5(Classification of Luminaires')	-	-
6.0(Marking)	-	-
7.0(Construction)	-	-
8.0(Creepage Distance and Clearances)	-	-
9.0(Provision for earthing)	-	-
10.0(Terminals)	-	-
11.0(External & Internal Wiring)	-	-
12.0(Protection against electric shock)	-	-
13.0(Endurance Tests and Thermal Tests)	-	-
14.0(Resistance to Dust & Moisture)	-	-
15.0(Insulation Resistance and Electric Strength)	-	-
16.0(Resistance to Heat , fire and tracking)	-	-
17.0(Photometric Test)	-	-

Complete

19 Apr, 2021

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45500 View breakup
-

Clause No.	Exclusion	Remark
7(Marking)	-	-
8(Protection against accidental contact with live parts)	-	-
9(Terminals)	-	-
10(PROVISION FOR EARTHING)	-	-
11(MOISTURE RESISTANCE)	-	-
12(Electric Strength)	-	-
13(Thermal endurance test for winding of ballasts)	-	-
14(Fault conditions)	-	-
15(Transformer heating)	-	-
16(Construction)	-	-
17(Creepage distance and clearances)	-	-
18(Screws, current carrying parts and connections)	-	-
19(Resistance to heat, fire and tracking)	-	-
20(Resistance to corrosion)	-	-
16(Enclosures)	-	-
16(Bridging resistor in primary circuit)	-	-
16(Capacitor and RC units)	-	-
16(RF suppression (X-Y capacitors))	-	-
16(Inductor)	-	-
16(MOV/VDR)	-	-
16(SMPS/Mains Transformer)	-	-
16(PCB material)	-	-
19(Metal base PCB for LED)	-	-
19(Transparent cover)	-	-
19(Bobbin)	-	-
16(Insulated tape)	-	-
16(Heat shrinkage sleeve)	-	-
19(Terminals)	-	-
16(Connector)	-	-
16(Fuse)	-	-
16(Internal wire)	-	-
16(LED)	-	-
16(Opto-coupler)	-	-
16(Opto-coupler)	-	-
16(EMI/EMC filter)	-	-
16(Winding wire)	-	-
16(Thin sheet materials)	-	-

Complete

19 Apr, 2021

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

45500 View breakup
-

Clause No.	Exclusion	Remark
5(Marking)	-	-
6(Interchangeability)	-	-
7(Protection against accidental contact with live parts)	-	-
8(Insulation Resistance and Electric Strength)	-	-
9(MECHANICAL STRENGTH)	-	-
10(cap temperature)	-	-
11(Resistance to Heat)	-	-
12(Resistance to Flame and Ignition)	-	-
13(Fault conditions)	-	-
14(Creepage distance and clearances)	-	-
4(General requirement and General test requirements)	-	-
5(Marking)	-	-
6(Interchangeability)	-	-
7(Protection against accidental contact with live parts)	-	-
8(Strength after humidity treatment)	-	-
9(Mechanical strength)	-	-
10(Cap temperature rise)	-	-
11(Resistance to heat)	-	-
12(Resistance to flame and ignition)	-	-
13(Fault conditions)	-	-
14(Creepage distances and clearances)	-	-
15(Selection of lamps for tests (Sampling))	-	-
16(Condition of compliance)	-	-
17(Tests)	-	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	-
Annex B(Lamps with operating position limitations)	-	-

Complete

19 Apr, 2021

-
-

IS 1651 (2013)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

- View breakup
Rs.50500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

19 Apr, 2021

-
Included w.e.f. 20.02.2020 Upto 12V, 800 Ah

IS 1652 (2013)

Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

- View breakup
Rs.50500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

19 Apr, 2021

-
Included w.e.f. 20.02.2020 Upto 12V, 800 Ah

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

78000 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7(Marking and instructions)	-	-
8(Protection against live parts)	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(IMPULSE VOLTAGE TEST)	-	-
15(HUMIDITY TREATMENT TEST)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	-

Complete

19 Apr, 2021

-
-

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45500 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7(Marking and instructions)	-	-
8(Protection against live parts)	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(TRANSIENT OVERVOLTAGES)	-	-
15(MOISTURE RESISTANCE)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	-
22.16(Automatic cord reel)	-	-
22.32(Oxygen bomb for rubber material)	-	-
22.47(Water pressure inlet)	-	-
22.3(Flexing test)	-	-
24(Components)	-	-

Complete

19 Apr, 2021

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

78000 View breakup
-

Clause No.	Exclusion	Remark
4.5(Components)	-	-
4.6(Power interface)	-	-
4.7(Marking & instructions)	-	-
5.1(Protection against shock and energy hazards)	-	-
5.2(Requirement of auxiliary circuits)	-	-
5.3(Protective earthing and bonding)	-	-
5.4(AC and DC power isolation)	-	-
5.5(Over current and earth fault condition)	-	-
5.6(Safety interlocks)	-	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
6.1(Wiring, connections and supply)	-	-
6.2(Connection to power)	-	-
6.3(Wiring terminals for external power conductors)	-	-
7.1(Enclosure)	-	-
7.2(STABILITY)	-	-
7.3(MECHANICAL STRENGTH)	-	-
7.4(Construction details)	-	-
7.5(Resistance to fire)	-	-
7.6(Battery location)	-	-
7.7(Temperature rise)	-	-
8.1(General procision for earth leakage)	-	-
8.2(Electric Strength)	-	-
8.3(Abnormal operating and fault conditions)	-	-
9.0(Connection to telecommunication networks)	-	-
4.5/RD 1.5(Components)	-	-
2.10.5.11(SMPS/Main transformer)	-	-
2.10.6(PCB Material)	-	-
3.2.5(Non-rewirable plug with PVC sheathed cable)	-	-
3.2.4(Appliances inlets/connectors)	-	-
2.10.5.4(Semiconductor devices)	-	-
5.6.1/ RD 2.8.7(Switches & Relays)	-	-
6.1.1/ RD 3.1.4(Insulating Conductors)	-	-

Complete

19 Apr, 2021

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	12000	-
8.2(Endurance test)	-	625000	Testing Charges for Endurance (2500 hrs. / 2000 hrs. / 1800 hrs. / 1500 hrs.) Rs. 6.25 lacs/5.0 lacs/ 4.5 lacs /3.75 lacs respectively
8.3(Charge retention test)	-	10000	-
8.4(Cycle endurance in Photovoltaic application)	-	825000	-
8.5(Sulphation Test)	-	3000	-
8.6(Water loss test)	-	126000	-

Complete

19 Apr, 2021

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

78000 View breakup
-

Clause No.	Exclusion	Remark
5(Marking and instructions)	-	-
6(Hazardous radiations)	-	-
7(Heating under normal operating conditions)	-	-
8(Constructional requirements with regard to the protection against electric shock)	-	-
9(Electric shock hazard under normal operating conditions)	-	-
10(Insulation requirements)	-	-
11(Fault conditions)	-	-
12(Mechanical strength)	-	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	-
14(Components)	-	-
15(TERMINALS)	-	-
16(External flexible cords)	-	-
17(Electrical connections and mechanical fixings)	-	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	-
19(Stability and mechanical hazards)	-	-
20(Resistance to fire)	-	-
6.1(Ionizing radiation)	-	-
6.2(Laser Radiation)	-	-
6.3()	-	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	-
8.16(Wound Component)	-	-
14(Components)	-	-
15(Internal wires and power cords)	-	-
16.3b(Cord Bending Test)	-	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	-
20.2.4(Printed Boards)	-	-

Complete

19 Apr, 2021

-
-

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

- View breakup
Rs.50500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

19 Apr, 2021

-
Included w.e.f. 20.02.2020 Upto 12V, 800 Ah

IS 14697 (1999)

AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification

144000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)( MARKING OF METERS: Name Plate )	-	1	Charges : for Type Test ; Rs. 1,44,000.00 & Acceptance Test ; Rs. 14,500.00 (per sample) Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 b)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 c)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 d)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 e)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 f)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 g)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 h)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 j)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 k)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 n)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 m)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1.1(Bis marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.2(Connection Diagrams and Terminal Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac Voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 a)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 b)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 c)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 b)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Limits of Error Due to Variation of the Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 a)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 b)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 c)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14(Test of Meter Constant/ Registration)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13(Test of Starting Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12(Test of No-Load Condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.11(Test of Ambient Temperature Influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16(Repeatability of Error Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.1(Test of Influence Quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of Power Consumption )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3(Test of Influence of Short-Time Over Currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of influence of self-heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of Influence of Heating )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.3(Test for Immunity to Electromagnetic HF Fields )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.4(Fast Transient Burst Tes)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.5(Radio interference measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(cold test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3(Damp Heat Cycle Test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3(Spring Hammer Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 a)(Test of Protection Against Penetration of Dust )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 b)( Protection against penetration of water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Test of Resistance to Heat and Fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.

Complete

19 Apr, 2021

-
-

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 b)(MARKING OF METERS : Name Plate )	-	1	For Type Test : Rs. 90,000/- (1 Ph.), Rs. 1,00,000/- (3 Ph.) For Acceptance Test : 10,000/- (1 Ph.)/Sample & Rs. 14,500/- (3 Ph.)/Sample. Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 c)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 d)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 e)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 f)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 g)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 h)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 j)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 k)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 m)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 p)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 n)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac Voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 a)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 b)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 c)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15(Test of Meter Constant/Registration)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14(Test of Starting Conditions)	-	1.01	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13(Test of No-Load Condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12(Test ofAmbient Temperature Influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.17(Repeatability of Error Test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of Power Consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3( Test of Influence of Short-time Overcurrents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of Influence of Self-Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of Influence of Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8(TestorImmunity to Earth Fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.4(FastTransient BurstTest)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.5(Radio Interference Measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(Dry Heat Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(Cold Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3( Damp Heat Cycle Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3( Spring Hammer Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Testof Resistance to Heat and Fire )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.11(Test of Iniluence Quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.

Complete

19 Apr, 2021

-
-

Bureau of Indian Standards

The National Standards Body of India

ELECTRONICS REGIONAL TEST LABORATORY (EAST)

BLOCK-DN;SECTOR-V;SALT LAKE CITY KOLKATA-700 091., KOLKATA, 24 Paraganas North, West Bengal, 700091

9830786241 [email protected]

Scope List

No Record Found

No Record Found

No Record Found