BIS - LIMS (Laboratory Information Management System)

Institute for Auto Parts and Hand Tools Technology

A-9, Phase-V, Focal Point, Ludhiana, Ludhiana, Ludhiana, Punjab, 141010

8427262400 [email protected]

Scope List

Reset

20 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 6118 (2017)

Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision)

All Grade / Type / Size / Designation etc

3360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(l)	-	1200	- Inspection charges = 1200/- for all Dimensions -Material test= 1460 Hardness Test (HV or HRc) =400 Handle load Test =300
Table 1(t1, max)	-	0	-
Table 1(g, min)	-	0	-
Table 1(l3.min)	-	0	-
Table 1(l1)	-	0	-
Table 1(Fa)	-	0	-
Table 1(Sb)	-	0	-

Complete

-
-

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

All Grade / Type / Size / Designation as per IS 7283

10310 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	1000	For freedom from defects mechanical test = Rs 800/ sample Hardness test = Rs 400/ sample
Cl 7(Diameter & Out Of Round)	-	800	-
Cl 8(Decarburization)	-	400	-
Cl 9(Inclusion)	-	400	-
Cl 10(Hardenability)	-	5000	Sample Preparation charges extra.
Cl 11(Size)	-	400	---
Cl 5(Material Test)	-	1110	Material test C, Si, Mn, P, S = Rs 90/Element = Rs 450 -Ni, Cr, Cu, V, Mo, Al, = Rs 110/ Element. = Rs 660 Rs 1110

Complete

-
-

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All Grade / Type / Size / Designation

4060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1300	Rs 1300/ sample for mechanical Test - C, Si, Mn, P, S = Rs 90/Element - Al = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12(Length, Width & Thickness)	-	1200	-
Cl 8(UTM)	-	1300	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12(Length, Width & Thickness)	-	1200	-

Complete

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All Grade / Type / Size / Designation as per 11513

4610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	90	- C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Manganese %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Phosphorus %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Sulphur %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Silicon %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Aluminium %)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Copper %)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Nb)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(V)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Ti)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 8(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	3000	Rs 3000/ sample for Dimensions & tolerance
6.1(Carbon %)	-	90	-
6.1(Manganese %)	-	90	-
6.1(Phosphorus %)	-	90	-
6.1(Sulphur %)	-	90	-
6.1(Silicon %)	-	110	-
6.1( Aluminium %)	-	110	-
6.1( Copper %)	-	110	-
6.1( Nb)	-	110	-
6.1(V)	-	110	-
6.1( Ti)	-	110	--
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	3000	-

Complete

-
-

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All Grade / Type / Size / Designation as per IS 10748

4610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	90	- C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Manganese %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Phosphorus %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Sulphur %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Silicon %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1( Copper %)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Ni)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(V)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1( Nb)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Mo)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
7.1(Cr)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 8 & Table 3(UTM)	-	1300	Rs 1300/ sample for mechanical test. Note : sample preparation charges extra.
Cl 9(Press)	-	500	Rs 500/ sample for Bend test. Note : sample preparation charges extra.
Cl 11(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 12 & 13(Length, Width & Thickness)	-	1200	Rs 1200/ sample for dimension and tolerances

Complete

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

All Grade / Type / Size / Designation as per IS 7887

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	90	- C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Silicon %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Manganese %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Phosphorus %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Sulphur %)	-	90	C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Aluminium %)	-	110	C, Si, Mn, P, S = Rs 90/Element - Cu, V, Al, Nb, Ti = Rs 110/Element. If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 8(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 9(Nominal Diameter & Out Of Shape)	-	1200	Rs 1200/ sample for dimensions.

Complete

-
-

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

All Grade / Type / Size / Designation

8610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	90	- C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Silicon %)	-	90	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Manganese %)	-	90	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Phosphorus %)	-	90	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Sulphur %)	-	90	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Ni)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Cr)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Mo)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(V)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1( Aluminium %)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1( Copper %)	-	110	C, Si, Mn, P, S, = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl 13(Workmanship)	-	500	Rs 500/ sample for Freedom from defects
Cl 8(UTM)	-	1300	Rs 1300/ sample for mechanical testing. Note: Sample preparation charges extra.
Cl 9(Press)	-	500	Rs 500/ sample for bend test. Note: Sample preparation charges extra.
Cl 10(Sudden Load Applied)	-	4000	Rs 1000/ set for Impact Test Rs 3000/ set for Sub zero impact
Cl 15(Length, Width & Thickness)	-	1200	Rs 1200/ sample for Dimensions.

Complete

-
-

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

All Grade / Type / Size / Designation as per IS 5872

4110 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(UTM)	-	800	Rs 800/ sample for Mechanical testing Note : sample preparation charges extra.
Cl 7(Bending To Both Side At 90°, Then Straight)	-	500	Rs. 500/ sample for re- bend test Note : sample preparation charges extra.
Cl 9(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 10(Width & Thickness)	-	1200	Rs 1200/ sample for dimensional tolerances.

Complete

-
-

IS 3502 (2009)

Steel chequered plates (Third Revision)

All Grade / Type / Size / Designation as per IS 3502

3310 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	400	Rs 400/ sample for freedom from defects - C, Si, Mn, P, S = Rs 90/Element Ni, Cr, Cu, V, Mo, Al = Rs110/Element
Cl 8(UTM)	-	800	Rs 800/ sample for mechanical test. Note:Sample preparation charges extra
Cl 9(Press)	-	500	Rs 500/ sample for Bend test. Note:Sample preparation charges extra
Cl 10(Length, Width, Thickness & Chequered Height)	-	500	Rs 500/ sample for Dimensions.

Complete

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grade / Type / Size / Designation as per IS 2062

7610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.3(UTM)	-	800	Rs 800/ sample for Mechanical Testing Sample Preparation charges extra. -
Cl 11.3(Press)	-	500	Rs 500/ sample for Bend Test. Sample Preparation charges extra.
Cl 12(Sudden Load Applied)	-	4000	RS 1000 / set for impact test Rs 3000/ set for Sub Zero Impact
Cl 15(Length, Width & Thickness)	-	1200	Rs 1200 / sample for Dimensions.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Cr, Mo, V, Ni, Cu, Al, = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	-

Complete

-
-

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

All Grade / Type / Size / Designation as per IS 6240

9010 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	90	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1(Silicon %)	-	90	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1(Manganese %)	-	90	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1(Phosphorus %)	-	90	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1(Sulphur %)	-	90	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1( Aluminium %)	-	110	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element.
6.1(Nitrogen%)	-	0	C, Si, Mn, P, S = Rs 90/ Element Ni, Cr, Cu, V, Mo, Al, = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl 7(UTM)	-	800	Rs 800/sample for Mechanical test.
Cl 8(Press)	-	500	Rs 500/ sample for bend test
Cl 9(Strainage Embrittlement)	-	4500	Rs 4500/ sample for strainage embrittlement
Cl 10(Erichsen Cupping)	-	500	Rs 500/ sample for Erichsen Cupping
Cl 13(Length, Width & Thickness)	-	1600	Rs 400 sample for Freedom from defect & Rs 1200 Dimensions & Tolerance

Complete

-
-

IS 5517 (1993)

Steels for hardening and tempering - Speicification (Second Revision)

All grade, Type, size and designation as per IS 5517

11320 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	90	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	110	- C, Si, Mn, P, S = Rs 90/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	400	Rs 400/ sample for hardness testing.
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	3100	Rs 2100 for mechanical testing, Rs 1000 for Impact testing . Note : Sample preparation charges extra.
10(Grain Size - IS 4748)	-	200	Rs 200/ sample for Grain size.
11.1(Inclusion Rating- IS 4163)	-	200	Rs 200/ sample for inclusion rating.
12;Table 7(Hardenability Test-IS 3848)	-	5000	Rs 5000/ sample for harden ability test.
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	1200	Rs 1200/ sample for dimensional tolerances.

Complete

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All Grade, Type, Size and Designation as per IS 1079

3810 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	90	Rs 90 Note: - C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V,Ni, Cu, Al =110/Element If "N” is required, then testing charges will be extra @ 1000/- per Sample for this element.
6.1(Manganese %)	-	90	Rs 90 Note: - C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V,Ni, Cu, Al =110/Element If "N” is required, then testing charges will be extra @ 1000/- per Sample for this element.
6.1(Phosphorus %)	-	90	Rs 90 Note: - C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V,Ni, Cu, Al =110/Element If "N” is required, then testing charges will be extra @ 1000/- per Sample for this element.
6.1(Sulphur %)	-	90	Rs 90 Note: - C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V,Ni, Cu, Al =110/Element If "N” is required, then testing charges will be extra @ 1000/- per Sample for this element.
Cl 8(UTM)	-	800	Rs 800 for Mechanical test (For YS, TS, Elongation) Note: Sample Preparation Charges Extra.
Cl 9(Press)	-	500	RS 500/ sample for bend test Note: Sample Preparation Charges Extra.
Cl 10(Die Press)	-	500	Rs 500/ sample for cupping test Note: Sample Preparation Charges Extra.
Cl 12(Workmanship)	-	400	Rs 400/ sample
Cl 13(Length, Width & Thickness)	-	500	Rs 500 for dimensional tolerances.

Complete

-
-

IS 6149 (1984)

Specification for single - Ended open - Jaw adjustable wrenches (First Revision)

All Grade, Type, Size and Designation

2710 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table-1(Dimensions- Nominal Size)	-	600	Rs 600/- for complete inspection. -
4 Table-1(Dimensions- a)	-	0	--
4 Table-1(Dimensions- b)	-	0	--
4 Table-1(Dimensions- t)	-	0	--
4 Table-1(Dimensions- d)	-	0	--
4 Table-1(Dimensions- Opening of adjustable jaws)	-	0	--
6(Hardness- Frame, handle and Jaw)	-	300	Rs 300/sample for Hardness testing -
8(Longitudinal Play of Adjustable Jaw)	-	200	---
8(Transverse Play of Adjustable Jaw)	-	200	---
8(Torque)	-	300	---
3(Grades)	-	1110	C, Si, Mn, P, S = Rs 90/Element. - Cr, Cu, V, Mo, Al, Ni = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.

Complete

-
-

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

All Grade, Type, Size and Designation as per IS 3650

4310 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- L)	-	1000	-
3 Table 1(Dimensions- a)	-	0	---
3 Table 1(Dimensions- b)	-	0	--
3 Table 1(Dimensions- c1)	-	0	--
3 Table 1(Dimensions- e)	-	0	---
3 Table 1(Dimensions- h)	-	0	--
3 Table 1(Dimensions- h1)	-	0	--
3 Table 1(Dimensions- t)	-	0	-
4(Hardness- Near cutting edges)	-	400	-
4(Hardness- Body gripping surfce)	-	0	---
8.2(Tube Gripping Test)	-	200	--
8.3(Shock Test)	-	200	--
8.4(Torsion Test)	-	300	---
8.5(Handle Load Test)	-	300	--
8.6(Bend Test)	-	200	--
8.7(Insulation Test)	-	400	--
8.1(Cutting Test)	-	200	--
5(Material testing (Chemical composition))	-	1110	--

Complete

-
-

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

All grade,Type, Size and Designation as per IS 2029

3410 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table-1(Dimensions- s1)	-	1200	Complete Inspection charges Rs 1200/-. C, Si, Mn, P, S = Rs 90/Element Cr, Mo V, Ni, Cu, Al, = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
3, Table-1(Dimensions- s2)	-	0	-
3, Table-1(Dimensions- a)	-	0	-
3, Table-1(Dimensions- b1)	-	0	-
3, Table-1(Dimensions- b2)	-	0	-
3, Table-1(Dimensions- L)	-	0	-
5(Hardness)	-	300	Rs 300/ sample for Hardness Testing.
6(Workmanship and Finish)	-	500	Rs 500/ sample for freedom from defects
6(Torque Testing)	-	300	Rs 300/ sample for Torque Testing.
3, Table-1(Dimensions- s1)	-	-	-
3, Table-1(Dimensions- s2)	-	-	-
3, Table-1(Dimensions- a)	-	-	-
3, Table-1(Dimensions- b1)	-	-	-
3, Table-1(Dimensions- b2)	-	-	-
3, Table-1(Dimensions- L)	-	-	-
5(Hardness)	-	-	-
6(Workmanship and Finish)	-	-	-
6(Torque Testing)	-	-	-

Complete

-
-

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

All Grade, Type, Size and designation as per IS 2028

3410 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions- a)	-	1200	Rs 1200/ sample for complete inspection C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
3.2, 3.3, 3.4(Dimensions- a)	-	0	-
3.2, 3.3, 3.4(Dimensions- l)	-	0	-
5(Hardness- upto 32 mm)	-	300	Rs 300/ sample for Hardness test
6(Workmanship And Finish)	-	500	Rs 500/ sample for freedom from defects.
8(Tourque test)	-	300	Rs 300 for torque Testing.

Complete

-
-

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

All Grade,Type,Size and designation as per IS 1875:1992

12110 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12(Supplementary Requirements)	-	1110	Note; - C, Si, Mn, P, S = Rs 90/Element. Cr, Mo, V, Ni, Cu, Al = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl 7(Workmanship)	-	400	Rs 400/ sample for freedom from defects.
Cl 8(Diameter, Ovality & Weight)	-	1200	RS 1200/sample for inspection.
Cl 9(UTM & HBW)	-	1700	Rs 800 for Mechanical Test and Rs 400 for Hardness test & RS 500 for Bend Test. Note : Sample preparation charges extra.
Cl 12(Supplementary Requirements)	-	7700	Rs 400/ sample for Grain size, Rs 800/ sample for Macro structure, Rs 1000/ Sample for UT, Rs 1000/sample MPI, RS 4500/-sample for blue fracture test Note: Sample preparation charges extra.
6.1, 6.2(cr + n + mo)	-	500	-
6.1, 6.2(tin)	-	110	-
6.1, 6.2(boron)	-	110	-
6.1, 6.2(vanadium)	-	110	-
6.1, 6.2(molybdenum)	-	110	-
6.1, 6.2(copper)	-	110	-
6.1, 6.2(aluminium)	-	110	-
6.1, 6.2(phosphorus)	-	90	-
6.1, 6.2(sulphur)	-	90	-
6.1, 6.2(manganese)	-	90	-
6.1, 6.2(silicon )	-	90	-
6.1, 6.2(carbon)	-	90	-
6.1, 6.2(cromium)	-	110	-
6, table 1(Chemical Composition)	-	1110	-

Complete

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All Grade ,Type ,Size, Designation as per IS 432 (II)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	300	- Only for P and S element minimum billing = Rs 600. - If “N " is required, then testing charges will be extra @ 2500/- per Sample for this element.
Clause 3.1.1(Phosphorus)	-	300	- Only for P and S element minimum billing = Rs 600. - If “N " is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 4.1(Workmanship)	-	400	Rs 400/ sample for freedom from defects .
Cl 5 & 6(Diameter)	-	1200	Rs 1200/ sample for dimensional tolerance.
Cl 7(UTM)	-	800	RS 800/ sample for mechanical testing Sample preparation charges extra.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	RS 500/ sample for Bend Test. Sample preparation charges extra.

Complete

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Grade, Type, Size and designation as per IS 432

3410 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	400	Rs 400/ sample for freedom from defects. sample Preparation Charges Extra.
Cl 6.2(Diameter & Ovality)	-	600	RS 600/ sample for Nominal Size & Mass.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	800	Rs 800/ sample for Mechanical Testing sample Preparation Charges Extra.
Cl 9.3(Press)	-	500	Rs 500/ sample for Bend Test sample Preparation Charges Extra.
Clause -4, 4.3(TITANIUM)	-	110	Rs. 1110 for Chemical Testing C, Si, Mn, P, S =Rs 90/Element Ni, Cr, Cu, V, Mo, Al = Rs 110/Element.
Clause -4, 4.2(VANADIUM)	-	110	-
Clause -4, 4.1(NIOBIUM)	-	110	-
Clause -4, 4.1(Molybdenum)	-	110	-
Clause -4, 4.1(Chromium)	-	110	-
Clause -4, 4.1(Nickel)	-	110	-
Clause -4, 4.1( ALUMINIUM)	-	110	-
Clause -4, 4.1(SILICON)	-	90	-
Clause -4, 4.1(NITROGEN)	-	110	-
Clause -4, 4.1(MANGANESE)	-	90	-
Clause -4, 4.1(PHOSPHURS)	-	90	-
Clause -4, 4.1(SULPHUR)	-	90	-
Clause -4, 4.1( CARBON)	-	90	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Institute for Auto Parts and Hand Tools Technology

A-9, Phase-V, Focal Point, Ludhiana, Ludhiana, Ludhiana, Punjab, 141010

8427262400 [email protected]

Scope List