BIS - LIMS (Laboratory Information Management System)

Unique Test House

VILLAGE:-SARSINI, PO:-LALRU, MOHALI, S.A.S Nagar, Punjab, 140501

9896169971 -

Scope List

Reset

59 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

ALL

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7(UTM)	-	1500		-

Complete

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

ALL

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Mechanical and Physical Properties)	-	100	-
Cl 8(UTM)	-	1000	-
Cl 9(Workmanship)	-	200	-
Cl 9.6(Workmanship)	-	200	-
Cl 10(Workmanship)	-	200	-
Cl 11(Length, Width & Thickness)	-	500	-
7.0(ALUMINIUM)	-	800	-
7.0(MICRO ALLOYS)	-	800	-
7.0(NITROGEN)	-	800	-
7.0(SILICON)	-	800	-
7.0(MANGANESE)	-	800	-
7.0(PHOSPHORUS)	-	800	-
7.0(SULPHUR)	-	800	-
7.0(CARBON)	-	800	-

Complete

-
-

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

ERW C1 to ERW C3

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	800	Testing Charges for Complete IS 2039(pt-1) -9300/- /IS 2039(pt-2) -9300/-/IS 2039(pt-3) -9300/-
Cl. 5.1 Table 1(Silicon)	-	800	.....
Cl. 5.1 Table 1(Manganese)	-	800	.....
Cl. 5.1 Table 1(Phosphorous)	-	800	....
Cl. 5.1 Table 1(Sulphur)	-	800	....
Cl. 6.1(Workmanship)	-	200	.....
Cl. 6.2(Fin Height)	-	500	....
Cl. 6.3(Straightness)	-	500	....
Cl. 8.1(Tensile Strength)	-	800	....
Cl. 8.1(Yield Strength)	-	600	....
Cl. 8.1(Elongation)	-	600	....
Cl. 8.2(Drift Expansion Test- IS 2335)	-	500	....
Cl. 8.3(Flattening Test-IS 2338)	-	500	....
Cl. 9(Diameter)	-	100	.....
Cl. 9(Thickness)	-	100	.....
Cl. 3.2.1, Table 4(Yield Stress)	-	600	....
Cl. 3.2.1, Table 4(UTS)	-	800	....
Cl. 3.2.1, Table 4(Elongation)	-	600	.....
Cl. 3.2.2, Table 2(Drift Expansion Test- IS 2335)	-	500	....
Cl. 3.2.3, Table 3(Flattening Test-IS 2338)	-	500	....
Cl. 4.2.1(Diameter)	-	100	.....
Cl. 4.2.2(Thickness)	-	100	....
Cl. 4.2.3(Length)	-	100	.....
Cl. 3.1(Carbon)	-	800	....
Cl. 3.1(Silicon)	-	800	....
Cl. 3.1(Manganese)	-	800	....
Cl. 3.1(Phosphorous)	-	800	....
Cl. 3.1(Sulphur)	-	800	...
Cl. 4.2.1, Table 7(Yield Stress)	-	600	....
Cl. 4.2.1, Table 7(UTS)	-	800	....
Cl. 4.2.1, Table 7(Crushing)	-	300	....
Cl. 4.2.2, Table 8(Drift Expansion Test- IS 2335)	-	600	....
Cl. 4.2.3, Table 9(Flattening Test-IS 2338)	-	500	...
Cl. 5.2.1, Table 10(Diameter)	-	100	....
Cl. 5.2.2(Mean Thickness)	-	100	....
Cl. 5.2.3, Table 6(Length)	-	100	...

Complete

-
-

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

TYPE-1 TO TYPE-5

10700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Type based on Flame retardant chemical used)	-	200	...
8(a) Length)	-	200	...
8(b) Width)	-	200	...
8(c) Thickness 1) less than 6mm ±10% 2) 6 mm and above ±5% )	-	200	...
8.3 & Annex A (d) Edge Straightness 0.2% Max.)	-	500	...
8.3 & Annex A (e) Edge Squareness 0.2% Max.)	-	500	...
9(Workmanship and finish)	-	200	...
12(Test Requirements )	-	500	...
12.2(Moisture content )	-	1000	....
12.3.1(Flammability )	-	1000	....
12.3.2(Flame Penetration )	-	1000	....
12.2.3(Rate of burning )	-	1500	....
12.4(Glue adhesion (water resistance ))	-	1000	...
12.4(Static Bending Strength as per BWR grade of IS 303 :)	-	1000	...
12.4(Modulus of Rupture, (Along the grain direction of the face veneer))	-	1000	....
12.4(Modulus of Rupture, (Along the grain direction of the face veneer))	-	1000	....
8.3 (Table 1)(b) 6 mm and above)	-	10700	10700/- FULL REPORT AS PER IS 5509:2021

Complete

-
-

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	100	....
13(Mechanical Testing)	-	2000	Tensile , Yield, Elongation.
6.0(Workmanship)	-	100	...
4.1(Sulphur-Percentage by mass)	-	700	Each Parameter - Rs-700/-
4.1(Phosphorus-Percentage by mass)	-	700	Each Parameter - Rs-700/-
8.0(Straightness)	-	100	..
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	150	...
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	150	...
11.1(Surface Protection)	-	100	...
11.2(Surface Protection)	-	100	...
13.1.3(Tensile Strength)	-	800	....
13.1.1(Yield Stress)	-	600	....
13.1.2(Elongation)	-	600	....
13.2(Flattening Test)	-	500	....
13.3(Bend Test (Strip))	-	500	....
13.4(Bend Test (Whole Tube))	-	500	....
13.5(Drift Expansion Test)	-	500	....
13.6(Crush Test)	-	500	....
19.1.3(Height of Internal Fin)	-	200	....
4.1(Sulphur-Percentage by mass)	-	100	-

Complete

-
-

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

GRADE-1 & GRADE 2 ,TYPE -O /HB/HD

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	...
7.0(Dimension and Tolerances)	-	100	...
8.1 Table 1(Cu)	-	500	...
8.1 Table 1(Pb)	-	500	...
8.1 Table 1(Fe)	-	500	...
8.1 Table 1(Total other impurities excluding iron)	-	100	...
8.1 Table 1(Zn)	-	500	...
9.1 Table-2(Tensile Strength)	-	800	...
9.1 Table-2(Elongation)	-	600	...
9.2(Vickers Hardness)	-	500	...
10.1(Mercurous Nitrate Test)	-	500	....

Complete

-
-

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

8300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	200	......
6 Table-1(Al)	-	800	.....
6 Table-1(Cu)	-	800	......
6 Table-1(Mg)	-	800	.....
6 Table-1(Si)	-	800	.....
6 Table-1(Fe)	-	800	....
6 Table-1(Mn)	-	800	....
6 Table-1(Zn)	-	800	....
6 Table-1(Ti)	-	800	....
6 Table-1(Cr)	-	800	....
6 Table-1(Cu+Si+Fe)	-	100	....
6 Table-1(Cu+Si+Fe+Mn+Zn)	-	100	...
6 Table-1(Cu+Mg+Si+Fe+Mn+Zn)	-	100	....
7 Table-2(Tensile Strength)	-	800	....
7 Table-2(Elongation)	-	600	....
7 Table-2(0.2 % Proof Stress)	-	600	....
7 Table-2(Bend Test)	-	300	...

Complete

-
-

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Grade-BWR ,Type- CS,CSC,CSFF

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	100	...
7.2(DIMENSIONS & TOLERANCES )	-	100	..
7.2(DIMENSIONS & TOLERANCES )	-	100	...
7.3(DIMENSIONS & TOLERANCES )	-	100	...
7.4(DIMENSIONS & TOLERANCES )	-	100	...
7.4(DIMENSIONS & TOLERANCES )	-	100	....
8.1(WORKMANSHIP AND FINISH )	-	100	...
8.3(WORKMANSHIP AND FINISH )	-	100	...
10.1.1(MOISTURE CONTENT)	-	1000	....
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	500	...
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	1000	...
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	1000	...
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	1000	...
10.1.4(RESISTANCE TO WATER TEST)	-	1000	...
10.1.5(MYCOLOGICAL TEST )	-	500	...
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	500	...
10.1.5.2(MYCOLOGICAL TEST )	-	500	...
10.1.6(TENSILE STRENGTH)	-	2000	...
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	500	..
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	500	...
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	500	...
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	500	...
10.1.9(RETENTION OF PRESERVATIVE)	-	1000	...
12, 12.1(MARKING)	-	100	...
12, 12.2(MARKING)	-	100	...
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	500	-
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	500	-
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	-
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	500	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	500	-
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	500	-

Complete

-
-

IS 5531 (2014)

Cast iron specials for asbestos cement pressure pipes for water and sewage - Specification (Third Revision)

7300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5(WALL THICKNESS AND CLASSIFICATION)	-	200	...
Cl. 6.2(Tensile Test)	-	2000	....
Cl. 6.3(Brinell Hardness Test)	-	500	....
Cl. 6.4(Retest)	-	300	...
Cl. 7(HYDROSTATIC TEST)	-	2000	...
Cl. 7.1.1 (Table 1)(Hydrostatic Test Pressure at Works)	-	500	...
Cl. 8(SIZES)	-	200	...
Cl. 9(DIMENSIONS)	-	500	..
Cl. 10.1(Thickness)	-	100	...
Cl. 10.2(Tolerance)	-	200	...
Cl. 12(COATING)	-	800	...
Cl. 5(WALL THICKNESS AND CLASSIFICATION)	-	200	....
Cl. 6.2(Tensile Test)	-	2000	...
Cl. 6.3(Brinell Hardness Test)	-	1000	....
Cl. 6.4(Retest)	-	200	....
Cl. 7(HYDROSTATIC TEST)	-	1500	...
Cl. 7.1.1 (Table 1)(Hydrostatic Test Pressure at Works)	-	500	....
Cl. 8(SIZES)	-	200	....
Cl. 9(DIMENSIONS)	-	500	...
Cl. 10.1(Thickness)	-	200	....
Cl. 12(COATING)	-	1000	....

Complete

-
-

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

ALL

2450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SIZE AND SHAPE)	-	500	-
6(FREEDOM FROM DEFECTS)	-	500	-
4, Table 2.(MECHANICAL PROPERTIES)	-	800	-
3, Table 1.(CHEMlCAL COMPOSITION)	-	800	800 PER PARATMETER
7.2(Dimension)	-	100	-
7.1(Mass)	-	200	-
6.2(Freedom from defects-Castings)	-	100	-
6.1(Freedom from defects-Ingots)	-	100	-
4.1, Table 2(Elongation)	-	100	-
4.1, Table 2(0.2% Proof stress)	-	200	-
4.1, Table 2(Tensile strength)	-	500	-

Complete

-
-

IS 2191 : Part 1 (1983)

Specification for wooden flush door shuiters (Cellular And Hollow Core Type): Part 1 plywood face panels (Fourth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4 (Table-2)(Size- Height)	-	500	...
Cl. 4 (Table-2)(Size- Width)	-	500	...
Cl. 4.2 (Nominal thickness of shutters)	-	500	....
Cl. 5.1(Timber)	-	1500	...
Cl. 5.2(Plywood)	-	1000	....
Cl. 5.3(Cross-Bands)	-	1500	....
Cl. 5.4(Face Veneers)	-	1500	....
Cl. 5.6(Adhesive)	-	2000	...
Cl. 5.7(Particle Board)	-	1500	....
Cl. 6(CONSTRUCTION)	-	2000	....
Cl. 6.1(Cellular Core)	-	1000	....
Cl. 6.2(Hollow Core)	-	1000	....
Cl. 6.3(Stiles and Rails)	-	2000	....
Cl. 6.4(Levelling)	-	1500	...
Cl. 6.5(Face Panel)	-	1500	...
Cl. 6.6(Lipping)	-	1500	...
Cl. 6.7(Rebating)	-	1500	...
Cl. 6.8(Opening for Glazing)	-	1500	...
Cl. 6.9(Venetian)	-	1500	...
Cl. 7(FITTINGS)	-	1500	..
Cl. 7.1(Locks)	-	1500	...
Cl. 8(WORKMANSHIP AND FINISH)	-	500	...
Cl. 9.1(End immersion Test)	-	2000	...
Cl. 9.2(Knife Test)	-	2000	....
Cl. 9.3(Adhesion Test)	-	2000	...

Complete

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

ALL GRADE

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	300	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	600	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	600	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	600	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	600	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	600	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	600	-

Complete

-
-

IS 14329 (1995)

Malleable iron castings - Specification

WM 350 to PM 700

1200 View breakup
Rs.1200/-

Complete

-
-

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

DCB-1,DCB-2

2100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	200	....
6.0(Shape)	-	100	....
6.0(Size)	-	100	...
6.0(Mass)	-	200	...
7.0(Cu)	-	700	..
7.0(Sn)	-	700	..
7.0(Pb)	-	700	...
7.0(Ni)	-	700	..
7.0(Fe)	-	700	..
7.0(Al)	-	700	...
7.0(Mn)	-	700	..
7.0(Si)	-	700	...
7.0(Total impurities excluding Ni Pb Al Zn)	-	100	...
9.0(Pressure test)	-	200	...

Complete

-
-

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

GRADE 1,2,3

8200 View breakup
Rs.8200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	2500	Rs-800/ for chemical test (each parameter)
Cl 9(Press)	-	800	...
Cl 11(Workmanship)	-	500	....
Cl 12(Length, Width & Thickness)	-	500	...
Cl 13(Workmanship)	-	300	...

Complete

-
-

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

BWP

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table-1(dimension )	-	500	--..
11.11(varying humidity test)	-	7500	--..
11.14(screw withdrawal resistance test)	-	3000	--..
11.7(shock resistance test)	-	2000	.....
7.1(Heavy duty (Construction))	-	500	...
7.2(Light duty)	-	500	...
7.3(Empanelment)	-	500	...
7.4(Lipping )	-	500	...
7.5(rebating )	-	500	...
9(workmanship and finish)	-	500	...
11.1(Dimension and squareness test)	-	1000	...
11.2(General flatness test)	-	1000	...
11.3(low Planeness Teat)	-	1000	...
11.4(Impact Indentation Test)	-	1000	...
11.5(Flexure Test)	-	1500	...
11.6(edge loading test)	-	2000	...
11.8(Buckling Test)	-	2000	...
11.9(slamming Test)	-	1000	....
11.1(misuse test)	-	1000	...
11.12(end immersion test)	-	2500	....
11.13(glue adhesion test)	-	1000	....

Complete

-
-

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

UP TO 600 MM

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Nominal Sizes)	-	2000		--
4(Nominal Pressures)	-	2500		LIQIUD PENETRATION TEST CHARGES-2000 EXTRA

Complete

-
-

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

GRADE-1,2

18700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and tolerances)	-	500	...
10.6(test for modulis of rupture)	-	2500	....
10.8(Test for tensile strength perpendicular to Surface after ageing )	-	2500	...
10.2, Table-1(Test for Density)	-	1000	....
10.4, Table-1(Test for Water Absorption)	-	1500	....
10.5(test for swelling in water)	-	1500	....
10.7(Test for tensile strength perpendicular to Surface)	-	2000	....
10.9(test screw withdrawal strength)	-	1500	....
10.1(test for surface abrasion resistance)	-	1500	...
10.11(test for resistance to steam)	-	1500	....
10.12(test for resistance to crack)	-	1000	....
10.13(test for resistance to cigarette burn)	-	1000	....
10.14(test for resistance to stain)	-	1000	....

Complete

-
-

IS 13095 (1991)

Butterfly valves for general purposes

UP TO 500 MM

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(VALVE END CONNECTIONS)	-	200	....
5(SERVICE APPLICATIONS)	-	200	...
6( NOMINAL SIZES )	-	200	....
7(NOMINAL PRESSURES)	-	200	...
7.2(Class designations)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	100	....
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	100	...
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	100	...
9.1.1 ( Double Flanged Body Ends)	-	100	...
9.2.2(Wafer Body Ends)	-	100	...
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	100	...
11(Bodies)	-	100	...
12(DISC AND SHAFT)	-	100	...
13(SEATING AND LININGS)	-	100	...
14(BEARINGS)	-	100	...
14.2(BEARINGS)	-	100	...
14.3(BEARINGS)	-	100	...
16(OPERATION)	-	1500	...
17.1(Performance Testing)	-	500	....
17.2(Body Test)	-	200	...
17.3(Seat Test)	-	200	...
17.4(Disc Strength Test)	-	200	....
4.0(VALVE END CONNECTIONS)	-	100	-
5.0(SERVICE APPLICATIONS)	-	100	-
6.0( NOMINAL SIZES )	-	100	-
7.0(NOMINAL PRESSURES)	-	500	-
7.2(Class designations)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	50	-
9.1.1 ( Double Flanged Body Ends)	-	50	-
9.2.2(Wafer Body Ends)	-	50	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	50	-
11.0(Bodies)	-	50	-
12.0(DISC AND SHAFT)	-	50	-
13.0(SEATING AND LININGS)	-	50	-
14.0(BEARINGS)	-	50	-
14.2(BEARINGS)	-	50	-
14.3(BEARINGS)	-	50	-
16.0(OPERATION)	-	50	-
17.1(Performance Testing)	-	50	-
17.2(Body Test)	-	50	-
17.3(Seat Test)	-	50	-
17.4(Disc Strength Test)	-	50	-
14.3(BEARINGS)	-	50	-
17.2(Body Test)	-	50	-

Complete

-
-

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

GRADE 1 AND 2

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	--.
Cl 10.9(Test For Screw Withdrawal Strength)	-	1500	--.
Cl 10.4(For Water AbsorptionTest )	-	1000	.......
Cl 4(Grades & Types)	-	1000	....
Cl 6(Manufacture)	-	500	....
Cl 7(Finish)	-	500	...
Cl 8(Dimensions & Tolerances)	-	500	...
Cl 10.2(Test For Density)	-	500	...
Cl 10.3(Test For Moisture Content)	-	1000	....
Cl 10.5(For Swelling in water Test )	-	1500	....
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	...
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1500	...
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	...
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	...
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	....
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	...
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	...

Complete

-
-

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

LIGHT , MEDIUM ,HEAVY

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	100	...
6.2, Table 1 to 6(Length , A -IS 12817)	-	100	....
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	200	...
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	100	...
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	100	....
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	100	....
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	100	....
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	100	...
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	100	...
7.1(General - IS 12817 )	-	100	...
7.2(Knuckles - IS 12817 )	-	100	...
7.3(Pins- IS 12817 )	-	100	...
7.4(Screw Holes- IS 12817 )	-	100	...
7.4.2(Position of screw holes - IS 12817 )	-	100	...
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	100	...
8(Finish - IS 12817 )	-	100	...
6.2, Table 1 to 6(Length , A -IS 12817)	-	100	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	100	-
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	100	-
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	100	-
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	100	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	100	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	100	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	100	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	100	-
7.1(General - IS 12817 )	-	100	-
7.2(Knuckles - IS 12817 )	-	100	-
7.3(Pins- IS 12817 )	-	100	-
7.4(Screw Holes- IS 12817 )	-	100	-
7.4.2(Position of screw holes - IS 12817 )	-	100	-
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	100	-
8.0(Finish - IS 12817 )	-	100	-
Clause 7.4.2 (Dimension - Z )	-	50	-
Clause 7.4.2 (Dimension - Y )	-	50	-
Clause 7.4.2 (Dimension - X )	-	50	-
Clause 7.4.1(Number of holes)	-	50	-

Complete

-
-

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

GRADE-1 AND 2

30000 View breakup
-

Complete

-
-

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

UP TO 304.8 MM

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.2(Tensile Test ,; IS 1608(P1))	-	800	.....
4.1(Pipe Manufacturing Process )	-	100	...
6 &7 ; Table 1(Dimension & Tolerance)	-	100	...
8(Length)	-	100	...
9(Galvanizing ,IS 4736)	-	1000	...
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	200	....
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	200	...
10,10.3,Table 2(Leakage Test)	-	500	...
11, Table 3(Angularity of Joint)	-	200	....
12(Straightness)	-	100	...
13.1(Flattening Test,IS 2328)	-	500	....
14(Hydraulic Test)	-	1500	....
4.1(Pipe Manufacturing Process )	-	0	....
5,5.1(Workmsnship &Finish)	-	200	...

Complete

-
-

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

HFS, CDS,ERW

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	1000	---
10(Hardness)	-	500	--
8.2(Drift Expansion Test- IS 2335)	-	500	....
8.1.1 Table 1(Elongation Percent- IS 1608)	-	500	...
8.3(Flattening Test- IS 2328)	-	500	....
9.1 Table 2(Outside Diameter)	-	100	....
9.1 Table 2(Thickness)	-	100	...
9.1 Table 2(Mass)	-	200	....
13.1.1(Ovality)	-	150	....
13.1.2(Eccentricity)	-	150	....
15.1(Straightness)	-	200	....
16.1(Length)	-	100	...
17.1(Surface Protection)	-	100	...
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	700	....
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	700	....
14.0(Workmanship)	-	100	...
8.1.1 Table 1(Yield Strength- IS 1608)	-	500	...
6.2(Fin height)	-	200	...

Complete

-
-

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

UP TO 600 MM

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3500	--
Cl 11(Hydrostatic Test)	-	2000	....
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	1500	...

Complete

-
-

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

FERRITIC,MARTENSITICE,AUSTENITIC STEEL

13000 View breakup
-

Complete

-
-

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

ANNEALED/SOFTENED/HARDENED&TEMPERED/COLD FINISH

4700 View breakup
-

Complete

-
-

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

0.071 MM-12.5 AND ABOVE ACCORDING TO 6528

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(UTM)	-	1000	--
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	---
Cl 6(Workmanship)	-	150	CHEMICAL AND CRROSION RESISTANCE CHARGES WILL BE EXTRA.
Table 7(Workmanship)	-	150	....
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	800	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	800	-

Complete

-
-

IS 6392 (2020)

Steel Pipes Flanges — Specification ( First Revision )

CLASS 0.1 TO CLASS 16.0

4500 View breakup
-

Complete

-
-

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

TYPE-1/TYPE -1A,TYPE-2,TYPE-2A, TYPE-3,TYPE-4

9000 View breakup
-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Unique Test House

VILLAGE:-SARSINI, PO:-LALRU, MOHALI, S.A.S Nagar, Punjab, 140501

9896169971 -

Scope List