BIS - LIMS (Laboratory Information Management System)

Sleen India Biz venture Private Limited

NH-2, 1st floor, 199 Singna, Kerawali, near keetham lake, Agra, Agra, Agra, Uttar Pradesh, 282007

8193022228 [email protected]

Scope List

Reset

41 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 3617 (1992)

Textiles – Gent’s pullover, knitted – Specification (first revision)

5160 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1( Dimensional changes)	-	420	EXCLUDING 18 % GST
5.2(Contruction )	-	120	EXCLUDING 18 % GST
5.2(Dimensional Changes )	-	420	EXCLUDING 18 % GST
5.2(Scouring Loss )	-	550	EXCLUDING 18 % GST
5.2(Alkali Solubility )	-	550	EXCLUDING 18 % GST
5.2(Colorfastness to light )	-	900	EXCLUDING 18 % GST
5.2(Colorfastness to Washing )	-	650	EXCLUDING 18 % GST
5.2(Colorfastness to Rubbing)	-	450	EXCLUDING 18 % GST
5.2(Colorfastness to dry cleaning)	-	450	EXCLUDING 18 % GST
5.2(Fiber content )	-	1050	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 13995 (1995)

Unlined moulded rubber boots - Specification

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Thickness )	-	120	EXCLUDING 18 % GST
5.1.1(Tensile Strength (before ageing))	-	420	EXCLUDING 18 % GST
5.1.2(Tensile Strength (after ageing))	-	4200	EXCLUDING 18 % GST
5.1.3(Tear Strength)	-	420	EXCLUDING 18 % GST
5.1.4(Resistance to dry heat ageing )	-	550	EXCLUDING 18 % GST
5.1.5(Flexing resistance of upper)	-	600	EXCLUDING 18 % GST
5.1.6(Design)	-	120	EXCLUDING 18 % GST
5.1.7(Size)	-	120	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 13893 (1994)

Polyurethane soles semirigid - specification

4120 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Design)	-	120	EXCLUDING 18 % GST
4.2(Thickness )	-	400	EXCLUDING 18 % GST
4.3(Relative density )	-	350	EXCLUDING 18 % GST
4.3(Hardness Shore(A))	-	350	EXCLUDING 18 % GST
4.3(Tensile Strength )	-	420	EXCLUDING 18 % GST
4.3(Elongation at break)	-	420	EXCLUDING 18 % GST
4.3(Abrasion Resistance)	-	900	EXCLUDING 18 % GST
4.3(Flexural strength )	-	600	EXCLUDING 18 % GST
4.3(Ross Flex test)	-	600	EXCLUDING 18 % GST
4.3.2(Ageing test)	-	120	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 11544 (1986)

Specification for slipper, rubber

3220 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shape & Design)	-	120	EXCLUDING 18 % GST
3.2(Relative density )	-	400	EXCLUDING 18 % GST
3.2(Hardness (IRHD))	-	500	EXCLUDING 18 % GST
3.2(Hardness after ageing)	-	550	EXCLUDING 18 % GST
3.2(Flexural endurance)	-	800	EXCLUDING 18 % GST
3.2.4(Mass per unit area)	-	150	EXCLUDING 18 % GST
3.2.4(End per cm)	-	150	EXCLUDING 18 % GST
3.2.4(Picks per cm)	-	150	EXCLUDING 18 % GST
3.2.4(Colour fasntess to washing)	-	400	EXCLUDING 18 % GST
3.2.5(Type of Thread)	-	120	EXCLUDING 18 % GST
3.2.6(Thickness of components)	-	400	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Shape & Design)	-	220	EXCLUDING 18 % GST
5.3(Thickness )	-	350	EXCLUDING 18 % GST
5.4(Relative density )	-	400	EXCLUDING 18 % GST
5.4(Hardness (Shore A))	-	500	EXCLUDING 18 % GST
5.4(Compression set)	-	500	EXCLUDING 18 % GST
5.4(Split tear strength )	-	600	EXCLUDING 18 % GST
5.4(Shrinkage test (at room temp))	-	550	EXCLUDING 18 % GST
5.4(Shrinkage test (at 100 C temp))	-	7000	EXCLUDING 18 % GST
5.4(Relative density)	-	350	EXCLUDING 18 % GST
5.4(Tensile Strength )	-	700	EXCLUDING 18 % GST
5.4(Elongation at break )	-	600	EXCLUDING 18 % GST
5.4(Breaking strength )	-	500	EXCLUDING 18 % GST
5.4(Hardness (shore A)- after ageing)	-	500	EXCLUDING 18 % GST
5.4(Tear strength )	-	600	EXCLUDING 18 % GST
5.4(Stud diameter)	-	150	EXCLUDING 18 % GST
5.4(Stud bolt)	-	150	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 6719 (1972)

Solid Pvc Soles And Heels

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6 (i)(Relative density )	-	400	EXCLUDING 18 % GST
3.6 (ii)(Tensile Strength )	-	700	EXCLUDING 18 % GST
3.6 (iii)(Elongation at break, percent )	-	600	EXCLUDING 18 % GST
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	600	EXCLUDING 18 % GST
3.6 (v)(Volatility, percent by means )	-	800	EXCLUDING 18 % GST
3.6 (vi)(Lead (as Pb) ppm)	-	800	EXCLUDING 18 % GST
3.6.1(Hardness )	-	500	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 6721 (1972)

Specification for PVC sandal

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Density )	-	400	EXCLUDING 18 % GST
4.0(Hardness (IRHD))	-	500	EXCLUDING 18 % GST
4.0(Tensile Strength )	-	700	EXCLUDING 18 % GST
4.0(Elongation at break )	-	600	EXCLUDING 18 % GST
4.0(Tear strength )	-	600	EXCLUDING 18 % GST
4.0(Volatility % by mass)	-	800	EXCLUDING 18 % GST
4.0(Lead Content )	-	800	EXCLUDING 18 % GST
4.4(Dimension)	-	600	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

6450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Size & Thickness )	-	350	EXCLUDING 18 % GST
4.2(Hardness (Shore A))	-	350	EXCLUDING 18 % GST
4.2(Compression set)	-	300	EXCLUDING 18 % GST
4.2(Split tear strength)	-	420	EXCLUDING 18 % GST
4.2(Shrinkage at room temp)	-	4200	EXCLUDING 18 % GST
4.2(Heat Shrinkage )	-	550	EXCLUDING 18 % GST
4.2(Water absorption)	-	300	EXCLUDING 18 % GST
4.2(Flexing resistance )	-	600	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 297 (2001)

Sodium sulphide, technical - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 (i)(Total Sulphide ( as Na2S))	-	1250	EXCLUDING 18 % GST
3.2 (ii)(Sodium )	-	1250	-
3.2 (iii)(Excess Alkali (as Na2CO3))	-	1250	EXCLUDING 18 % GST
3.2 (vi)(Reducing)	-	1250	EXCLUDING 18 % GST
3.2 (v)(Iron and aluminum compound (Fe2O3))	-	1250	EXCLUDING 18 % GST
3.2 (vi)(Sodium Sulphate (Na2SO4))	-	1250	EXCLUDING 18 % GST
3.2 (vii)(Sodium Chloride ( as NaCI))	-	1250	EXCLUDING 18 % GST
3.2 (viii)(Water insoluble)	-	1250	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 2080 (1980)

Specification for stabilized hydrogen peroxide (First Revision)

8750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No. 3.4 [ Table 1, Sl no.(i) ] Appendix C-1 Grade 1(Acidity (as H2SO4))	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 1(Residue on evaporation.)	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 3(Residue on evaporation.)	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no.(iv) ] Appendix C-4 Grade 1, Grade 2 , & Grade 3 (Iron ( at Fe ))	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no.(v) ] Appendix C-5 Grade 1, Grade 2 , & Grade 3 (Copper ( as Cu ))	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no.(vi) ] Appendix C-6 Grade 1, Grade 2 , & Grade 3 (Lead (as Pb))	-	1250	EXCLUDING 18 % GST
Cl No. 3.4 [ Table 1, Sl no.(vii) ] Appendix C-7 Grade 1, Grade 2 , & Grade 3 ref to 5.1 of IS : 2088-1971(Arsenic ( as As2O3 ))	-	1250	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

20695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	420	EXCLUDING 18 % GST
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	720	EXCLUDING 18 % GST
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	660	EXCLUDING 18 % GST
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	2940	EXCLUDING 18 % GST
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	120	EXCLUDING 18 % GST
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	2490	EXCLUDING 18 % GST
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	2710	EXCLUDING 18 % GST
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	3095	EXCLUDING 18 % GST
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	3500	EXCLUDING 18 % GST
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	1000	EXCLUDING 18 % GST
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	120	EXCLUDING 18 % GST
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	120	EXCLUDING 18 % GST
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	120	EXCLUDING 18 % GST
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	720	EXCLUDING 18 % GST
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	720	EXCLUDING 18 % GST 20

Complete

15 May, 2024

-
-

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1(Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2(Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2(Sodium sulphite (Na2SO3))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2(pH (of 1 percent solution))	-	350	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2(Lead (as Pb))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2(Copper (as Cu))	-	1250	EXCLUDING 18 % GST
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-	1250	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

18720 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.11(Materials)	-	4080	EXCLUDING 18 % GST
5.2.11.2(Materials)	-	3910	EXCLUDING 18 % GST
5.3(Components)	-	2620	EXCLUDING 18 % GST
5.4( Manufacture )	-	3910	EXCLUDING 18 % GST
5.4.8(Workmanship and Finish)	-	1930	EXCLUDING 18 % GST
5.5(Mass)	-	420	EXCLUDING 18 % GST
5.6(Performance Test)	-	1500	EXCLUDING 18 % GST
5.7(Adhesion Test on Moulded Bottoms)	-	350	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Shape and Dimension)	-	120	EXCLUDING 18 % GST
5.2(Shape and Dimension)	-	120	EXCLUDING 18 % GST
5.3.1(Thickness)	-	550	EXCLUDING 18 % GST
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	700	EXCLUDING 18 % GST
5.5(Relative Density, IS 12240 (Part 3))	-	350	-
5.6(Volatility, IS 12240 ( Part 2) )	-	550	EXCLUDING 18 % GST
5.7(Lead Content )	-	550	EXCLUDING 18 % GST
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	840	EXCLUDING 18 % GST
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	600	EXCLUDING 18 % GST
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	600	EXCLUDING 18 % GST
5.11(Leg Height, IS 12240 (part 9))	-	120	EXCLUDING 18 % GST
5.12(Leakage Resistance)	-	1100	EXCLUDING 18 % GST
5.13(Cold Flex Temperature)	-	1500	EXCLUDING 18 % GST
5.15(Performance)	-	1100	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2(Materials - Insole Material )	-	3910	EXCLUDING 18 % GST
5.2.3(Materials - Stiffener )	-	2620	EXCLUDING 18 % GST
5.2.4(Materials - Lining Material )	-	3910	EXCLUDING 18 % GST
5.2.5(Materials - Threads )	-	420	EXCLUDING 18 % GST
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	590	EXCLUDING 18 % GST
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	590	EXCLUDING 18 % GST
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	470	EXCLUDING 18 % GST
5.2.7(Materials - Cotton NEWAR)	-	540	EXCLUDING 18 % GST
5.2.8(Materials - Toe-Compound)	-	570	EXCLUDING 18 % GST
5.2.9(Materials - Laces)	-	1930	EXCLUDING 18 % GST
5.2.10(Materials - Steel Toe Cap)	-	1970	EXCLUDING 18 % GST
5.2.11.1 (Table 1)(Sole and Heel )	-	350	EXCLUDING 18 % GST
5.2.11.2(Sole and Heel )	-	350	EXCLUDING 18 % GST
5.2.11.4(Sole and Heel )	-	420	EXCLUDING 18 % GST
5.3 (Table 3)(Components)	-	350	EXCLUDING 18 % GST
5.4.8.3(Workmanship and Finish)	-	350	EXCLUDING 18 % GST
5.5, 5.5.1(Mass)	-	350	EXCLUDING 18 % GST
5.6(Performance Test)	-	350	EXCLUDING 18 % GST
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	420	EXCLUDING 18 % GST

Complete

15 May, 2024

-
-

IS 15844 (2010)

Sports Footwear Specification

22700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Design )	-	120	EXCLUDING GST 18%
3.2.2(Mass of pairs )	-	120	EXCLUDING GST 18%
3.2.3 & 3.2.4(Visual )	-	120	EXCLUDING GST 18%
3.3.1(Contruction)	-	120	EXCLUDING GST 18%
3.3.2(Upper/outsole bond strength)	-	720	EXCLUDING GST 18%
3.3.3(Sole /midsole bond strength )	-	720	EXCLUDING GST 18%
3.3.4(Energy absorption of seat region )	-	420	EXCLUDING GST 18%
3.4(Upper flexing resistance )	-	600	EXCLUDING GST 18%
3.4(Hydrolysis )	-	600	EXCLUDING GST 18%
3.4(Adhesive Strength )	-	720	EXCLUDING GST 18%
3.4(Tensile Strength)	-	420	EXCLUDING GST 18%
3.4(Elongation at Break )	-	420	EXCLUDING GST 18%
3.4(Tear Strength)	-	420	EXCLUDING GST 18%
3.4(Colour fastness to crocking )	-	350	EXCLUDING GST 18%
3.4(Colorfastness to light )	-	1000	EXCLUDING GST 18%
3.5(Tensile Strength)	-	420	EXCLUDING GST 18%
3.5(Die-C tear Strength )	-	420	EXCLUDING GST 18%
3.8(Compression set )	-	300	EXCLUDING GST 18%
3.8(Heat resistance tester )	-	1080	EXCLUDING GST 18%
3.5(Adhesive to sole)	-	720	EXCLUDING GST 18%
3.6(Trouser tear strength )	-	420	EXCLUDING GST 18%
3.6(Die-C tear Strength )	-	420	EXCLUDING GST 18%
3.6(Abrasion resistance )	-	900	EXCLUDING GST 18%
3.6(Adhesion to mid sole )	-	420	EXCLUDING GST 18%
3.6(Ross flexing )	-	600	EXCLUDING GST 18%
3.7(Tensile Strength)	-	420	EXCLUDING GST 18%
3.7(Water absorption & loss percent )	-	600	EXCLUDING GST 18%
3.7(Abrasion resistance )	-	900	EXCLUDING GST 18%
3.7(Flexing index)	-	720	EXCLUDING GST 18%
3.8(Tensile Strength)	-	420	EXCLUDING GST 18%
3.8(Elongation at Break )	-	420	EXCLUDING GST 18%
3.8(Die-C tear Strength )	-	420	EXCLUDING GST 18%
3.9(Breaking Strength )	-	420	EXCLUDING GST 18%
3.9(Colour fastness to rubbing )	-	350	EXCLUDING GST 18%
3.9(Strength of shoe lace tags )	-	420	EXCLUDING GST 18%
3.9(Lace abrasion test)	-	420	EXCLUDING GST 18%
3.10(Crush load )	-	420	EXCLUDING GST 18%
3.10(Collapsing load )	-	420	EXCLUDING GST 18%
3.10(Shape retention percent )	-	420	EXCLUDING GST 18%
3.10(Ross Flex test)	-	600	EXCLUDING GST 18%
3.11(Corrosion resistance)	-	1000	EXCLUDING GST 18%

Complete

15 May, 2024

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

14605 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	2140	EXCLUDING 18% GST
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	2940	EXCLUDING 18% GST
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	2490	EXCLUDING 18% GST
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	990	EXCLUDING 18% GST
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	3095	EXCLUDING 18% GST
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	420	EXCLUDING 18% GST
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	420	EXCLUDING 18% GST
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	550	EXCLUDING 18% GST
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	720	EXCLUDING 18% GST
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	720	EXCLUDING 18% GST
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	120	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Workmanship and Finish - IS 17423)	-	500		EXCLUDING 18% GST
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	4500		EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

5460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4 and Table 1 i(Capacity)	-	250	EXCLUDING 18% GST
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	EXCLUDING 18% GST
5.2 and Table 1 iii(Ends per dm )	-	250	EXCLUDING 18% GST
5.2 and Table 1 iv(Picks per dm )	-	250	EXCLUDING 18% GST
5.1 and Table 1 v(Mass of sack )	-	250	EXCLUDING 18% GST
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	420	EXCLUDING 18% GST
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	420	EXCLUDING 18% GST
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	420	EXCLUDING 18% GST
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	EXCLUDING 18% GST
5.2 and Table 1 x(Ash content )	-	450	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

5040 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5 and Table 1 i(Capacity)	-	250	EXCLUDING 18% GST
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	EXCLUDING 18% GST
5.2 and Table 1 iii(Ends per dm )	-	250	EXCLUDING 18% GST
5.2 and Table 1 iv(Picks per dm )	-	250	EXCLUDING 18% GST
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	EXCLUDING 18% GST
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	420	EXCLUDING 18% GST
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	420	EXCLUDING 18% GST
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	EXCLUDING 18% GST
5.2 and Table 1 x(Ash content )	-	450	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

2960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	EXCLUDING 18% GST
4.2 and Table 1 ii(Dimensions )	-	250	EXCLUDING 18% GST
5.2 and Table 1 iii(Ends per dm )	-	250	EXCLUDING 18% GST
5.2 and Table 1 iv(Picks per dm )	-	250	EXCLUDING 18% GST
4.2 and Table 1 v(Mass of sack )	-	250	EXCLUDING 18% GST
4.2 and Table 1 vi(Average breaking strength of fabric )	-	420	EXCLUDING 18% GST
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	420	EXCLUDING 18% GST
4.2 and Table 1 viii(Elongation at break of fabric )	-	420	EXCLUDING 18% GST
4.2 and Table 1 x(Ash content )	-	450	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

4790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	EXCLUDING 18% GST
4.1 and Table 1 ii(Ends per dm )	-	250	EXCLUDING 18% GST
4.1 and Table 1 iii(Picks per dm )	-	250	EXCLUDING 18% GST
4.2 and Table 1 iv(Mass of sack )	-	250	EXCLUDING 18% GST
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	420	EXCLUDING 18% GST
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	420	EXCLUDING 18% GST
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	EXCLUDING 18% GST
4.1 and Table 1 ix(Ash content )	-	450	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 2052 (2009)

Compounded feeds for cattle - Specification (Fourth Revision)

11150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - i(Moisture - Cl 4 of IS 7874 (Part 1))	-	400	EXCLUDING 18% GST
4.3 - Table 1 - ii(Crude protein (N x 6.25) - Cl 5 of IS 7874 (Part 1))	-	750	EXCLUDING 18% GST
4.3 - Table 1 - iii(Crude fat - Cl 7 of IS 7874 (Part 1))	-	550	EXCLUDING 18% GST
4.3 - Table 1 - iv(Crude fibre - Cl 8 of IS 7874 (Part 1))	-	750	EXCLUDING 18% GST
4.3 - Table 1 - v(Acid insoluble ash - Cl 10 of IS 7874 (Part 1))	-	750	EXCLUDING 18% GST
4.3 - Table 2 - i(Salt (as NaCl) - Cl 4 of IS 7874 (Part 2))	-	750	EXCLUDING 18% GST
4.3 - Table 2 - ii(Calcium (as Ca) - IS 13433 (Part 1 / Part 2))	-	1050	EXCLUDING 18% GST
4.3 - Table 2 - iii(Total Phosphorus - IS 14828)	-	750	EXCLUDING 18% GST
4.3 - Table 2 - iv(Available Phosphorus - Annex C of IS 1374)	-	1050	EXCLUDING 18% GST
4.3 - Table 2 - v(Urea - IS 7874 )	-	750	EXCLUDING 18% GST
4.3 - Table 2 - vi(Vitamin A - ISO 14565)	-	1050	EXCLUDING 18% GST
4.3 - Table 2 - vii(Vitamin D3 - Annex E)	-	1050	EXCLUDING 18% GST
4.3 - Table 2 - viii(Vitamin E - Annex F)	-	750	EXCLUDING 18% GST
4.3 - Table 2 - ix(Aflatoxin B1- Annex G)	-	750	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

13350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	420	EXCLUDING 18% GST
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	420	EXCLUDING 18% GST
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	3060	EXCLUDING 18% GST
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	1320	EXCLUDING 18% GST
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	1090	EXCLUDING 18% GST
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	2160	EXCLUDING 18% GST
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	670	EXCLUDING 18% GST
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	400	EXCLUDING 18% GST
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	120	EXCLUDING 18% GST
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	420	EXCLUDING 18% GST
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	550	EXCLUDING 18% GST
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	240	EXCLUDING 18% GST
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	120	EXCLUDING 18% GST
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	400	EXCLUDING 18% GST
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	120	EXCLUDING 18% GST
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	120	EXCLUDING 18% GST
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	120	EXCLUDING 18% GST
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	400	EXCLUDING 18% GST
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	420	EXCLUDING 18% GST
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	420	EXCLUDING 18% GST
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	420	EXCLUDING 18% GST
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	400	EXCLUDING 18% GST
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	120	EXCLUDING 18% GST
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	400	EXCLUDING 18% GST
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	900	EXCLUDING 18% GST
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	600	EXCLUDING 18% GST
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	420	EXCLUDING 18% GST
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	400	EXCLUDING 18% GST
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	600	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

17060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(a) Upper Leather)	-	2450	EXCLUDING 18% GST
8(b) Lining Leather)	-	3950	EXCLUDING 18% GST
8(c) Bottom Material)	-	1920	EXCLUDING 18% GST
8(d) Steel Toe Cap)	-	760	EXCLUDING 18% GST
8(f) Bottom Filling)	-	2970	EXCLUDING 18% GST
8(g) Eyelet)	-	360	EXCLUDING 18% GST
8(k) Screw Wire)	-	1040	EXCLUDING 18% GST
16(Finish)	-	120	EXCLUDING 18% GST
8(n) Laces)	-	1090	EXCLUDING 18% GST
10(Finish)	-	120	EXCLUDING 18% GST
8(c) Bottom Material)	-	1920	EXCLUDING 18% GST
8(g) Eyelet)	-	360	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

120 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1(Design)	-	120		EXCLUDING GST 18%

Complete

15 May, 2024

-
-

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

4830 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	350	EXCLUDING 18% GST
Clause 6(FREEDOM FROM DEFECTS)	-	120	EXCLUDING 18% GST
Clause 7 Sub-Clause 7.1(Material)	-	3500	EXCLUDING 18% GST
Clause 10 Table 2(Preferred Thickness)	-	120	EXCLUDING 18% GST
Clause 12(Dimension and Tolerances: I) Width)	-	120	EXCLUDING 18% GST
Clause 12(Dimension and Tolerances: 2) Length)	-	120	EXCLUDING 18% GST
Clause 14(Surface condition)	-	500	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

19940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	120	EXCLUDING 18% GST
5.2.3 Table-2(Seat Region)	-	120	EXCLUDING 18% GST
5.3.1.1 Table-2(Construction)	-	120	EXCLUDING 18% GST
5.3.1.2 Table-2(Upper/Outsole Bond)	-	720	EXCLUDING 18% GST
5.3.2.2 Table-2(Internal Length of toe cap)	-	200	EXCLUDING 18% GST
5.3.2.1 Table-2(General)	-	200	EXCLUDING 18% GST
5.3.2.3 Table-2(Impact Resistance -T- )	-	400	EXCLUDING 18% GST
5.3.2.4 Table-2(Compression)	-	400	EXCLUDING 18% GST
5.3.3 Table-2(Leak Proofness)	-	300	EXCLUDING 18% GST
5.3.4 Table-2(Specific Ergonomic)	-	600	EXCLUDING 18% GST
5.3.5.2 Table-2(Slip Resistance SRA)	-	1500	EXCLUDING 18% GST
5.4.1 Table-2(General)	-	120	EXCLUDING 18% GST
5.4.2 Table-2(Thickness)	-	120	EXCLUDING 18% GST
5 4 3 Table-2(Tear Strength)	-	420	EXCLUDING 18% GST
5.4.4 Table-2(Tensile Properties)	-	420	EXCLUDING 18% GST
5.4.5 Table-2(Flexing Resistance)	-	600	EXCLUDING 18% GST
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	420	EXCLUDING 18% GST
5 4.7 Table-2( )	-	420	EXCLUDING 18% GST
5 4.8 Table-2(Hydrolysis)	-	1200	EXCLUDING 18% GST
5.4 9 Table-2(Chrome VI)	-	720	EXCLUDING 18% GST
5.5.1 Table-2(Tear Strength)	-	420	EXCLUDING 18% GST
5.5.2 Table-2(Abrasion Resistance)	-	900	EXCLUDING 18% GST
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	420	EXCLUDING 18% GST
5.5.4 Table-2(pH Value)	-	180	EXCLUDING 18% GST
5.5.5 Table-2(Chrome VI)	-	720	EXCLUDING 18% GST
6.2.1 Table-I8(Penetration Resistance)	-	420	EXCLUDING 18% GST
6.2.2.1 Table-18(Electrical Properties)	-	420	EXCLUDING 18% GST
Table-18(Conductive Footwear)	-	420	EXCLUDING 18% GST
6.2.2.2 Table-18(Antistatic Footwear)	-	1080	EXCLUDING 18% GST
6.2.2.3 Table-18(Electrically Insulated)	-	420	EXCLUDING 18% GST
6.2.3.1 Table-18(Heat Insulated Comp)	-	600	EXCLUDING 18% GST
6.2.3.2 Table-18(Cold Insulated)	-	600	EXCLUDING 18% GST
6.2.4 Table-18(Energy Absorption of seat region)	-	420	EXCLUDING 18% GST
6.2.5 Table-18(Water Resistance)	-	300	EXCLUDING 18% GST
6.2.6 Table-18(Ankle Protection)	-	800	EXCLUDING 18% GST
6.3 Table-18(Water Penetration & Absorption)	-	720	EXCLUDING 18% GST
6.2.7 Table-18(Cut Resistance)	-	1000	EXCLUDING 18% GST
6.4.1 Table-18(Resistance to Hot Contact)	-	300	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	500	EXCLUDING 18% GST
4.3(Thickness)	-	500	EXCLUDING 18% GST
4.4.1(Physical Properties)	-	1000	EXCLUDING 18% GST
4.4.3(After heat ageing in autoclave)	-	1500	EXCLUDING 18% GST
4.4.4(Tension Set)	-	500	EXCLUDING 18% GST
4.5(pH of Aqueous Extract )	-	500	EXCLUDING 18% GST

Complete

15 May, 2024

-
-

IS 8521 : Part 1 (1977)

Specification for industrial safety face shields: Part 1 with plastics visor

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	10000		EXCLUDING GST 18%

Complete

15 May, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

Sleen India Biz venture Private Limited

NH-2, 1st floor, 199 Singna, Kerawali, near keetham lake, Agra, Agra, Agra, Uttar Pradesh, 282007

8193022228 [email protected]

Scope List