BIS - LIMS (Laboratory Information Management System)

KRISHNA DIGITAL MATERIAL TESTING LABORATORY

02, Bhawani Nagar JK Road Bhopal, Bhopal, Bhopal, Madhya Pradesh, 462021

9425813624 [email protected]

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M30 TO M50

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	250	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	250	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	150	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	150	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	150	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	150	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	150	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	800	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	800	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	750	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	1200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1200	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1200	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1100	-
Clause 7.3, Annex G(Average Breaking Load)	-	1100	-

Complete

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

Precast Concrete Paving Blocks

8350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	-
6.1.2(Physical requirement)	-	100	-
6.1.3(Physical requirement)	-	100	-
6.1.4(Physical requirement)	-	100	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	100	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	100	-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	200	-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	100	-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	100	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	100	-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	100	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	100	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	500	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1000	-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	500	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1250	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	1150	-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	500	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	500	-
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	200	-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	750	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	1000	-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	250	-
Annex-G-7(AVERAGE BREAKING LOAD)	-	250	-
6.2.4, Table 4(Water Absorption)	-	250	-

Complete

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

Cement Concrete Flooring Tiles

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 11(Suface Finish)	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1000	-
Cl 12.7(Resistance to wear)	-	2500	-
Cl 12.2(Concavity & Convexity )	-	500	-

Complete

-
-

IS 303 (1989)

Plywood for General Purposes -

General Purpose Plywood

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	250	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-

Complete

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- i(Fineness 4031 Part 2)	-	500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-

Complete

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33 Grade 43 Grade 53 Grade 53 S Grade

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 i.(Fineness)	-	500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	500	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iv(Magnesia)	-	500	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

KRISHNA DIGITAL MATERIAL TESTING LABORATORY

02, Bhawani Nagar JK Road Bhopal, Bhopal, Bhopal, Madhya Pradesh, 462021

9425813624 [email protected]

Scope List