BIS - LIMS (Laboratory Information Management System)

Central Institute of Petrochemical Engineering and Technology

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 [email protected]

Scope List

Reset

33 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

upto DN 315mm

23925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	0.0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
9.1(PIPE ENDS)	-	0	compiled with the test charges for cl no. 10.1
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
Clause 10.7(Sulphated Ash Content)	-	950	-
11.2(Resistance to External Blows at 0°C)	-	1400	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-

Complete

31 Dec, 2023

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

upto DN 315 mm

49275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	5825	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
7.2(Length)	-	0.0	-
7.4 table -3 & 4(6.1 Dimensions)	-	800	ovality & visual appearance charges are inclusive
7.4.1.2(Ovality)	-	0.0	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8.2(Longitudinal Reversion Test)	-	900	-
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	-
8.9 table-6(Elongation at Break)	-	1600	-
8.1(Slow Crack Growth Rate)	-	6000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.3(Carbon black)	-	1625	CBC & CBD ARE INCLUSIVE
5.3 (a)(Carbon Black Master Batch)	-	925	-
5.3(d)(Carbon Black Master Batch)	-	950	-
6.2(Colour)	-	250	identification of stripes charges are inclusive
8.6(Overall migration)	-	2000	-

Complete

31 Dec, 2023

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

ALL

17725.00 View breakup
FOR OTHERS : Rs. 14350/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 7700/- GST for Low Density Polyethylene Films (Natural) Type III & IV Rs. 16925/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 10275/- + GST for Low Density Polyethylene Films(Black) Type III & IV. For PE Film & sheet - Raw Materials Rs. 2650/- + GST for Natural Compound Rs. 1500/- + GST for Black Compound. Rs. 4075/- + GST for Carbon Black Masterbatch (Optional). Rs. 5100/- + GST for Carbon Black Powder (Optional). FOR BIS : Rs. 12025/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 5900/- + GST for Low Density Polyethylene Films (Natural) Type III & IV. Rs. 13956/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 7831/- + GST for Low Density Polyethylene Films (Black) Type III & IV. For PE Film & sheet - Raw Materials. For PE Film & sheet - Raw Materials Rs. 1988/- + GST for Natural Compound. Rs. 375/- + GST for Black Compound. Rs. 3056/- + GST for Carbon Black Masterbatch (Optional). Rs. 3825/- + GST for Carbon Black Powder (Optional).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1225	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1225	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1225	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1225	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	875	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	875	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-

Complete

31 Dec, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

Central Institute of Petrochemical Engineering and Technology

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 [email protected]

Scope List