BIS - LIMS (Laboratory Information Management System)

CENTRAL LEATHER RESEARCH INSTITUTE

Sardar Patel Road Adyar, Opposite to Indian Institute Of Technology, Chennai, Tamil Nadu 600020, chennai, Chennai, Tamil Nadu, 600020

8610157276 [email protected]

Scope List

Reset

22 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Phthalates contect )	-	1000	-
8.6(Carcinogenic Disperse Dyes)	-	1000	-
8.6(Allergenic Disperse Dyes)	-	0	-
8.6(Leak Proof test)	-	200	-
8.4(Volatility & lead content )	-	500	-
8.3(Compression Resistance)	-	0	-
8.3(Impact resistance )	-	1000	-
8.2(Internal Toe cap length)	-	200	-
8.1(Height of upper )	-	200	-
8.0(Construction)	-	0	-
7.10(Ageing test)	-	800	-
7.9(Hydrolysis)	-	0	-
7.8(Insocks Material )	-	0	-
7.7.5(Upper / Outsole bond strength)	-	0	-
7.7.4(Interlayer Bond Strength )	-	600	-
7.7.3(Flexing Resistance )	-	600	-
7.7.2(Abrasion Resistance)	-	700	-
7.7.1(Tear Strength )	-	600	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	0	-
7.7(Density )	-	0	-
7.6(Peel Strength )	-	600	-
7.6(Shape retention)	-	1000	-
7.6(Moisture )	-	0	-
7.6(Resilience test )	-	0	-
7.6(Hardness)	-	0	-
7.6(Dry collapsing)	-	0	-
7.5(Insocks )	-	800	-
7.5(Insoles )	-	0	-
7.5(Water abrasion & desorption)	-	0	-
7.5(Thickness )	-	0	-
7.4(Tensile Strength )	-	0	-
7.4(Abrasion Resistance)	-	0	-
7.4(Tear Strength )	-	0	-
7.3(Flexing Resistance )	-	500	-
7.3(Tensile Strength )	-	600	-
7.3(Thickness )	-	0	-
7.3(Water Vapour permeability & coefficient )	-	600	-
7.3(Tear Strength )	-	0	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance )	-	0	-

Complete

02 May, 2024

-
-

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	600	-
4.2(Water absorption)	-	800	-
4.2(Heat Shrinkage )	-	400	-
4.2(Shrinkage at room temp)	-	0	-
4.2(Split tear strength)	-	600	-
4.2(Compression set)	-	1000	-
4.2(Hardness (Shore A))	-	800	-
4.2(Density )	-	400	-
4.2(Size & Thickness )	-	0	-

Complete

02 May, 2024

-
-

IS 13995 (1995)

Unlined moulded rubber boots - Specification

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	0	-
5.1.6(Design)	-	0	-
5.1.5(Flexing resistance of upper)	-	600	-
5.1.4(Resistance to dry heat ageing )	-	600	-
5.1.3(Tear Strength)	-	600	-
5.1.2(Tensile Strength (after ageing))	-	600	-
5.1.1(Tensile Strength (before ageing))	-	600	-
4.1(Thickness )	-	0.02	-

Complete

02 May, 2024

-
-

IS 13893 (1994)

Polyurethane soles semirigid - specification

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	800	-
4.3(Ross Flex test)	-	600	-
4.3(Flexural strength )	-	600	-
4.3(Abrasion Resistance)	-	700	-
4.3(Elongation at break)	-	600	-
4.3(Tensile Strength )	-	600	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	400	-
4.2(Thickness )	-	0	-
4.1(Design)	-	0	-

Complete

02 May, 2024

-
-

IS 11544 (1986)

Specification for slipper, rubber

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	0	-
3.2.5(Type of Thread)	-	0	-
3.2.4(Colour fasntess to washing)	-	4800	IT INCLUDES LIGHT FASTNESS,WASHING AND PERSPIRATION
3.2.4(Picks per cm)	-	0	-
3.2.4(End per cm)	-	0	-
3.2.4(Mass per unit area)	-	0	-
3.2(Flexural endurance)	-	600	-
3.2(Hardness after ageing)	-	500	-
3.2(Hardness (IRHD))	-	0	-
3.2(Relative density )	-	400	-
3.1(Shape & Design)	-	0	-

Complete

02 May, 2024

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Stud bolt)	-	0	-
5.4(Stud diameter)	-	0	-
5.4(Tear strength )	-	600	-
5.4(Hardness (shore A)- after ageing)	-	500	-
5.4(Hardness (Shore A))	-	0	-
5.4(Breaking strength )	-	0	-
5.4(Elongation at break )	-	0	-
5.4(Tensile Strength )	-	600	-
5.4(Relative density )	-	400	-
5.4(Shrinkage test (at 100 C temp))	-	0	-
5.4(Shrinkage test (at room temp))	-	0	-
5.4(Split tear strength )	-	600	-
5.4(Compression set)	-	1000	-
5.4(Hardness (Shore A))	-	500	-
5.4(Relative density)	-	0	-
5.3(Thickness )	-	0	-
5.1(Shape & Design)	-	0	-

Complete

02 May, 2024

-
-

IS 6721 (1972)

Specification for PVC sandal

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Dimension)	-	0	-
4.0(Lead Content )	-	250	-
4.0(Volatility % by mass)	-	250	-
4.0(Tear strength )	-	600	-
4.0(Elongation at break )	-	0	-
4.0(Tensile Strength )	-	600	-
4.0(Hardness (IRHD))	-	500	-
4.0(Density )	-	400	-

Complete

02 May, 2024

-
-

IS 6719 (1972)

Solid Pvc Soles And Heels

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	800	-
3.6 (vi)(Lead (as Pb) ppm)	-	250	-
3.6 (v)(Volatility, percent by means )	-	250	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	600	-
3.6 (iii)(Elongation at break, percent )	-	600	-
3.6 (ii)(Tensile Strength )	-	600	-
3.6 (i)(Relative density )	-	400	-

Complete

02 May, 2024

-
-

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

38800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	0	-
5.2.3 Table-2(Seat Region)	-	0	-
5.3.1.1 Table-2(Construction)	-	0	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	600	-
Table-2(Strength)	-	0	-
5.3.2.1 Table-2(General)	-	0	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	100	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	1000	-
5.3.2.4 Table-2(Compression)	-	600	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	400	-
5.3.3 Table-2(Leak Proofness)	-	200	-
5.3.4 Table-2(Specific Ergonomic)	-	500	-
Table-2(Features)	-	0	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	1500	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	0	-
Table-2(0.18)	-	23100	INNOCUOSNESS 2100 FOR 1 SAMPLE TOTAL 11 SAMOLE 11*2100=23100
5.3.5.4 Table-2(Slip Resistance SRC)	-	0	-
5.4.1 Table-2(General)	-	0	-
5.4.2 Table-2(Thickness)	-	0	-
5 4 3 Table-2(Tear Strength)	-	600	-
5.4.4 Table-2(Tensile Properties)	-	600	-
5.4.5 Table-2(Flexing Resistance)	-	600	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	600	-
5 4.7 Table-2( )	-	0	-
5 4.8 Table-2(Hydrolysis)	-	500	-
5.4 9 Table-2(Chrome VI)	-	0	-
5.5.1 Table-2(Tear Strength)	-	0	-
5.5.2 Table-2(Abrasion Resistance)	-	700	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	0	-
5.5.4 Table-2(pH Value)	-	0	-
5.5.5 Table-2(Chrome VI)	-	0	-
5.6.1 Table-2(Tear Strength)	-	0	-
5.6.2 Table-2(pH Value)	-	0	-
5.6.3 Table-2(Chromium VI)	-	0	-
5.7.1 Table-3(Thickness)	-	0	-
5.7.2 Table-3(pH Value)	-	0	-
5.7.3 Table-3(Water Absorption &)	-	0	-
Table-3(Desorption)	-	0	-
5.7.4.1 Table-3(Insole Abrasion)	-	0	-
5.7.4.2 Table-3(Abrasion)	-	0	-
5.7.5 Table-3(Chromium VI)	-	0	-
5.8.1 Table-2(Design)	-	0	-
5.8.2 Table-2(Tear Strength)	-	0	-
5.8.3 Table-3(Abrasion Resistance)	-	0	-
5.8.4 Table-3(Flexing Resistance)	-	0	-
5.8.5 Table-3(Hydrolysis)	-	0	-
5.8.6 Table-2(Interlayer BondStrength)	-	0	-
6.2.1 Table-I8(Penetration Resistance)	-	0	-
6.2.2.1 Table-18(Electrical Properties)	-	500	-
Table-18(Conductive Footwear)	-	0	-
6.2.2.2 Table-18(Antistatic Footwear)	-	0	-
6.2.2.3 Table-18(Electrically Insulated)	-	0	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	1000	-
6.2.3.2 Table-18(Cold Insulated)	-	2000	-
6.2.4 Table-18(Energy Absorption of seat region)	-	500	-
6.2.5 Table-18(Water Resistance)	-	500	-
6.2.6 Table-18(Ankle Protection)	-	0	-
6.2.7 Table-18(Cut Resistance)	-	600	-
6.3 Table-18(Water Penetration & Absorption)	-	0	-
6.4.1 Table-18(Resistance to Hot Contact)	-	0	-
6.4.2 Table-18(Resistance to Fuel oil)	-	0	-

Complete

02 May, 2024

-
-

IS 16645 (2018)

Moulded Plastics Footwear ” Lined or Unlined Polyurethane Boots for General Industrial use ” Specification

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.8.2& 5.8.3(Hydrolysis )	-	0	-
5.8.1(Tensile strength after Hydrolysis)	-	600	-
5.7(Split tear strength )	-	600	-
5.6(Resistance to soling to cut growth)	-	600	-
5.5(Cold flex temp of upper)	-	600	-
5.4(Hardness (IRHD))	-	500	-
5.3(Tesile Strength )	-	600	-
5.2(Resistance to flexing of boot upper)	-	600	-
5.1(General )	-	0	-
4.3(Thickness of components )	-	0	-
4.2(Thickness )	-	0	-
4.1(Soling Pattern )	-	0	-

Complete

02 May, 2024

-
-

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Sulphur content )	-	400	-
5.5(Relative Density)	-	400	-
5.6(Volatility )	-	250	-
5.7(Lead Content )	-	250	-
5.1.1(Shape and Dimension)	-	0	-
5.2(Shape and Dimension)	-	0	-
5.3.1(Thickness)	-	0	-
5.3.2 Table 1(Thickness, Boot Upper, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel , Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel , Full Thickness,IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	0	-
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	500	-
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	0	-
5.5(Relative Density, IS 12240 (Part 3))	-	400	-
5.6(Volatility, IS 12240 ( Part 2) )	-	0	-
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	0	-
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	0	-
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	0	-
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	0	-
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	600	-
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	0	-
5.11(Leg Height, IS 12240 (part 9))	-	200	-
5.12(Leakage Resistance)	-	200	-
5.13(Cold Flex Temperature)	-	1000	-
5.14(Finish)	-	0	-
5.13(Cold flex test)	-	0	-
5.12(Leakage resistance)	-	200	-
5.11(Leg Height )	-	0	-
5.10(resistance to flexing for upper )	-	200	-
5.9(Resistance to cut growth (flexing test))	-	600	-
5.8(Tensile Strength )	-	600	-
5.7(Lead contect )	-	0	-
5.6(Volatility )	-	0	-
5.5(Relative density )	-	0	-
5.4(Hardness (IRHD))	-	0	-
5.3(Thickness )	-	0	-
5.2(Soling pattern )	-	0	-
5.1(Shape & Design)	-	0	-

Complete

02 May, 2024

-
-

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4200	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-

Complete

02 May, 2024

-
-

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	3000	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	600	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	400	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	400	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	600	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	400	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	600	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	200	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	1000	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-

Complete

02 May, 2024

-
-

IS 17043 (2018)

Derby shoes - Specification

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	23100	2100 FOR 1 PARAMETER TOTAL 11 PARAMETER 11*2100=23100
4.15.2(Breaking load & tag retention)	-	0	-
4.15.1(Length of laces )	-	0	-
4.14(Eyelet strength )	-	1600	-
4.13.8(Flex resistance )	-	600	-
4.13.7(Abrasion resistance )	-	0	-
4.13.6(Tear Strength)	-	0	-
4.13.5(Ageing test)	-	1000	-
4.13.4(Hardness (IRHD))	-	500	-
4.13.3(Density )	-	400	-
4.13.2(Thickness )	-	0	-
4.13.1(Meterial)	-	0	-
4.12(Breaking Strength of thread)	-	600	-
4.11.2(Tear Strength)	-	0	-
4.11.1(Thickness )	-	0	-
4.10(Toe Puff & counter stiffener thickness )	-	0	-
4.9.3(Abrasion resistance )	-	0	-
4.9.2(Water absorption & desorption )	-	0	-
4.9.1(Thickness )	-	0	-
4.8.3(Water absorption & desorption )	-	500	-
4.8.2(Abrasion )	-	0	-
4.8.1(Thickness )	-	0	-
4.7.4(Water vapour permeability & coefficent )	-	0	-
4.7.3(Abrasion resistance )	-	700	-
4.7.2(Tear Strength)	-	0	-
4.7.1(Thickness )	-	0	-
4.6.4(Water penetration and water absorption)	-	800	-
4.6.3(Water vapour permeability & coefficent )	-	600	-
4.6.2(Tear Strength)	-	600	-
4.6.1(Thickness )	-	0	-
4.5.8(Energy absorption of seat region )	-	500	-
4.5.7(Cold insulation tester )	-	2000	-
4.5.6(Heat insulation of sole complex)	-	1000	-
4.5.5.1(Electrical Properties Antistatic )	-	500	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	600	-
4.5.3.1(Upper/outsole bond strength)	-	0	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Contruction)	-	0	-
4.4(Height of upper )	-	200	-
4.3.2(Weight)	-	200	-
4.4, Table 3(Height of the Upper)	-	0	-
4.5.3(Bond Strength)	-	0	-
4.9(Insocks)	-	0	-
6.1(Scale of Sampling)	-	0	-
6.2(Methods of Selecting Footwear)	-	0	-
6.3.1(Visual and Tactile Examination)	-	0	-
6.3.2(Dimensional Characteristics)	-	0	-
6.3.3.1(Tests for physical requirements)	-	0	-
6.3.3.2(Tests for chemical requirements)	-	0	-
7(Marking)	-	0	-
6.1.3, Table 4(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	0	-

Complete

02 May, 2024

-
-

IS 17037 (2018)

Anti riot shoes - Specification

39500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	23100	2100 FOR 1 PARAMETER TOTSL 11 PARAMETER 11 X 2100=23100
4.16.2(Breaking load & lag retention)	-	0	-
4.16.1(Length of laces )	-	0	-
4.15(D-ring and Hooks )	-	0	-
4.15.10(Resistance to fuel oil )	-	600	-
4.15.9(Resistance to hot contact )	-	600	-
4.15.8(Flex resistance )	-	0	-
4.15.7(Abrasion resistance )	-	0	-
4.15.6(Tear Strength)	-	0	-
4.14.5(Ageing test)	-	0	-
4.14.4(Hardness (IRHD))	-	500	-
4.14.3(Density )	-	400	-
4.14.2(Thickness )	-	0	-
4.14.1(Meterial)	-	0	-
4.13(Breaking Strength of thread)	-	600	-
4.12.2(Tear Strength)	-	0	-
4.12.1(Thickness )	-	0	-
4.11.2(Tear Strength)	-	0	-
4.11.1(Thickness)	-	0	-
4.10(Counter stiffener thickness)	-	0	-
4.9.3(Water absorption & desorption )	-	0	-
4.9.2(Abrasion resistance )	-	0	-
4.9.1(Meterial)	-	0	-
4.8.3(Water absorption & desorption )	-	0	-
4.8.2(Abrasion resistance )	-	0	-
4.8.1(Meterial)	-	0	-
4.7.5(Water vapour permeability & coefficent )	-	0	-
4.7.4(Abrasion resistance )	-	700	-
4.7.3(Tear Strength)	-	0	-
4.7.1(Meterial)	-	800	-
4.6.4(Water penetration and water absorption)	-	800	-
4.6.3(Water vapour permeability & coefficent )	-	600	-
4.6.2(Tear Strength)	-	600	-
4.6.1(Thickness )	-	0	-
4.5.11(Water resistance machine method)	-	500	-
4.5.11(Water Resistance Tray method )	-	0	-
4.5.11(Thickness Toe puff & counter stiffener)	-	0	-
4.5.10(Energy absorption of seat region )	-	500	-
4.5.9(Cold insulation of sole complex)	-	2000	-
4.5.8(Heat insulation of sole complex)	-	1000	-
4.5.7.1(Antistatic test)	-	500	-
4.5.6.4(Compression resistance)	-	600	-
4.5.6.3(Impact resistance )	-	1000	-
4.5.6.2(Internal Toe cap length)	-	200	-
4.5.6.1(General)	-	0	-
4.5.5.4(Ageing test)	-	0	-
4.5.5.3(Nail penetraion Insert )	-	800	-
4.5.5.2(Flex resistance )	-	600	-
4.5.5.1(Dimension)	-	0	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	600	-
4.5.3.1(Upper/outsole bond strength)	-	0	-
4.5.2(Ergonomic Feature)	-	0	-
4.5.1(Contruction)	-	0	-
4.4(Height of upper )	-	200	-
4.3.2(Weight)	-	200	-
4.3.1(Size)	-	0	-
4.2(Design )	-	0	-
4.1(General)	-	0	-
4.5.3(Bond strength)	-	0	-
4.9(Insocks)	-	0	-
5(Chemical Requirements)	-	0	-
6.1(Scale of Sampling)	-	0	-
6.2(Methods of Selecting Footwear)	-	0	-
6.3.1(Visual and Tactile Examination)	-	0	-
6.3.2(Dimensional Characteristics)	-	0	-
6.3.3.1(Tests for physical requirements)	-	0	-
6.3.3.2(Tests for chemical requirements)	-	0	-
7(Marking)	-	0	-
4.4, Table 2(Shoe size)	-	0	-
4.4, Table 2(Height)	-	0	-
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	0	-

Complete

02 May, 2024

-
-

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

36900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	23100	2100 for 1 parameter total 11 parameter 2100*11=23100
4.16.2(Breaking Strength of lace )	-	600	-
4.16.1(Length of lace )	-	0	-
4.15(D-ring & Hooks )	-	0	-
6.1(Resistance to Fuel Oil)	-	600	-
4.14.9(Resistance to hot contact )	-	600	-
4.14.8(Flexing resistance )	-	600	-
4.14.7(Ageing test)	-	500	-
4.14.6(Hardness (IRHD))	-	500	-
4.14.5(Abrasion resistance )	-	0	-
4.14.4(Tear Strength)	-	0	-
4.14.3(Sole Density )	-	400	-
4.14.2(Thickness)	-	0	-
4.14.1(Meterial)	-	0	-
4.13(Breaking Strength of thread )	-	600	-
4.12.2(Tear Strength)	-	0	-
4.12.1(Thickness )	-	0	-
4.11.2(Tear Strength)	-	0	-
4.11.1(Thickness )	-	0	-
4.10.3(Water absorption & desorption percent)	-	0	-
4.10.2(Abrasion resistance )	-	0	-
4.10.1(Meterial )	-	0	-
4.9.3(Water absorption & desorption percent)	-	0	-
4.9.2(Abrasion resistance )	-	0	-
4.9.1(Thickness)	-	0	-
4.8(Thickness Toe puff & counter stiffener)	-	0	-
4.7.5(Water Vapour permeability & coefficient )	-	600	-
4.7.4(Abrasion resistance )	-	700	-
4.7.3(Tear Strength)	-	0	-
4.7.2(Meterial Counter & Toungue)	-	0	-
4.7.1(Meterial vamp & Quarter)	-	0	-
4.6.3(Water Penetration and water absorption )	-	800	-
4.6.2(Tear Strength)	-	600	-
4.6.1(Thickness )	-	0	-
4.5.8(Energy absorption of seat region )	-	500	-
4.5.7(Cold Insulation of sole complex)	-	2000	-
4.5.6(Heat Insulation of sole Complex)	-	1000	-
4.5.5(Antistatic test)	-	500	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	1200	-
4.5.3.1(Upper/outsole bond strength)	-	0	-
4.5.2(Ergonomic Feature)	-	0	-
4.5.1(Contruction)	-	0	-
4.4(Height of upper )	-	200	-
4.3.2(Weight)	-	200	-
4.3.1(Size)	-	0.01	-
4.2(Design )	-	0	-

Complete

02 May, 2024

-
-

IS 15844 (2010)

Sports Footwear Specification

17150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.11(Corrosion resistance)	-	800	-
3.10(Ross Flex test)	-	600	-
3.10(Shape retention percent )	-	0	-
3.10(Collapsing load )	-	0	-
3.10(Crush load )	-	800	-
3.9(Lace abrasion test)	-	700	-
3.9(Strength of shoe lace tags )	-	0	-
3.9(Colour fastness to rubbing )	-	1000	-
3.9(Breaking Strength )	-	800	-
3.8(Heat resistance tester )	-	600	-
3.8(Compression set )	-	0	-
3.8(Die-C tear Strength )	-	0	-
3.8(Elongation at Break )	-	0	-
3.8(Tensile Strength)	-	0	-
3.7(Flexing index)	-	400	-
3.7(Abrasion resistance )	-	600	-
3.7(Water absorption & loss percent )	-	800	-
3.7(Tensile Strength)	-	0	-
3.6(Ross flexing )	-	600	-
3.6(Adhesion to mid sole )	-	0	-
3.6(Abrasion resistance )	-	700	-
3.6(Die-C tear Strength )	-	0	-
3.6(Trouser tear strength )	-	0	-
3.5(Heat resistance tester )	-	500	-
3.5(Adhesive to sole)	-	0	-
3.5(Compression set )	-	1000	-
3.5(Die-C tear Strength )	-	600	-
3.5(Split tear strength )	-	0	-
3.5(Elongation at Break )	-	0	-
3.5(Tensile Strength)	-	600	-
3.4(Colorfastness to light )	-	0	-
3.4(Colour fastness to crocking )	-	3000	-
3.4(Tear Strength)	-	600	-
3.4(Adhesive Strength )	-	1200	-
3.4(Hydrolysis )	-	0	-
3.4(Upper flexing resistance )	-	600	-
3.3.4(Energy absorption of seat region )	-	500	-
3.3.3(Sole /midsole bond strength )	-	0	-
3.3.2(Upper/outsole bond strength)	-	600	-
3.3.1(Contruction)	-	0	-
3.2.3 & 3.2.4(Visual )	-	0	-
3.2.2(Mass of pairs )	-	0	-
3.2.1(Design )	-	0	-

Complete

02 May, 2024

-
-

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

12650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	0	-
5, 5.1(Requirements )	-	0	-
5.2, 5.2.1, 5.2.1.1(Materials - Upper Leather )	-	3000	-
5.2.2(Materials - Insole Material )	-	2400	-
5.2.3(Materials - Stiffener )	-	1600	-
5.2.4(Materials - Lining Material )	-	2100	-
5.2.5(Materials - Threads )	-	0	-
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	0	-
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	0	-
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	0	-
5.2.7(Materials - Cotton NEWAR)	-	0	-
5.2.8(Materials - Toe-Compound)	-	0	-
5.2.9(Materials - Laces)	-	0	-
5.2.10(Materials - Steel Toe Cap)	-	0	-
5.2.11.1 (Table 1)(Sole and Heel )	-	0	-
5.2.11.2(Sole and Heel )	-	0	-
5.3 (Table 3)(Components)	-	0	-
5.4.8(Workmanship and Finish)	-	0	-
5.4.8.2(Workmanship and Finish)	-	0	-
5.4.8.3(Workmanship and Finish)	-	0	-
5.5, 5.5.1(Mass)	-	0	-
5.5, 5.5.2(Mass)	-	0	-
5.5, 5.5.3(Mass)	-	0	-
5.6(Performance Test)	-	0	-
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	0	-
5.7, 5.7.2(Adhesion Test on Moulded Bottoms)	-	0	-
7, 7.1(Marking)	-	0	-
5.7(Adhesion Test )	-	1200	-
5.6(Impact resistance )	-	1000	-
5.5(Mass per pairs)	-	0	-
5.4(Construction)	-	0	-
5.3(Thickness of components )	-	0	-
5.2.11.4(Ageing Test)	-	0	-
5.2.11.2(Mass after resistance to chemical effect)	-	0	-
5.2.11.2(Tensile Strength after resistance to chemical effect)	-	600	-
5.2.11.2(Elongation at break after Resistance to chemical effect)	-	0	-
5.2.11.2(Hardness after Resistance to chemical effect )	-	500	-
5.2.11(Flexing Resistance )	-	600	-
5.2.11(Tensile Strength )	-	0	-
5.2.11(Elongation at break)	-	0	-
5.2.11(Hardness (IRHD))	-	500	-
5.2.11(Material Sole & heel )	-	0	-
5.2.10(Impact resistance )	-	0	-
5.2.9(Length )	-	0	-
5.2.8(Toe-compound )	-	0	-
5.2.7(Width of fabric)	-	0	-
5.2.6.3(Eyelets diameter)	-	0	-
5.2.6.2(Corrosion Shanks )	-	0	-
5.2.6.1(Corrosion test Lasting tacks)	-	0	-
5.2.5(Breaking Strength )	-	0	-
5.2.5(Twist)	-	0	-
5.2.5(Count)	-	0	-
5.2.5(Composition )	-	0	-
5.2.4(Lining Material )	-	0	-
5.2.3(Peel Strength )	-	600	-
5.2.3(Shape Retention)	-	0	-
5.2.3(Moisture)	-	0	-
5.2.3(Resilience Test)	-	1000	-
5.2.3(Hardness )	-	0	-
5.2.3(Dry collapsing)	-	0	-
5.2.2(Insole Material )	-	0	-
5.2(Material )	-	0	-

Complete

02 May, 2024

-
-

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

12950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(REQUIREMENTS)	-	0	-
5.2(Materials)	-	0	-
5.2.1(Materials)	-	0	-
5.2.1.1(Materials)	-	3000	-
5.2.2(Materials)	-	2400	-
5.2.3(Materials)	-	1600	-
5.2.4(Materials)	-	3400	-
5.2.5(Materials)	-	0	-
5.2.6(Materials)	-	0	-
5.2.6.1(Materials)	-	0	-
5.2.6.2(Materials)	-	0	-
5.2.6.3(Materials)	-	0	-
5.2.7(Materials)	-	0	-
5.2.8(Materials)	-	0	-
5.2.9(Materials)	-	400	-
5.2.10(Materials)	-	0	-
5.2.11(Materials)	-	0	-
5.2.11.1(Materials)	-	0	-
5.2.11.2(Materials)	-	0	-
5.2.11.3(Materials)	-	0	-
5.3(Components)	-	0	-
5.4( Manufacture )	-	0	-
5.4.1( Manufacture )	-	0	-
5.4.8(Workmanship and Finish)	-	0	-
5.5(Mass)	-	0	-
5.6(Performance Test)	-	0	-
5.7(Adhesion Test on Moulded Bottoms)	-	0	-
7(MARKING)	-	0	-
5.7(Toe adhesion )	-	1200	-
5.6.(Toe Impact test)	-	1000	-
5.5(Mass per pairs)	-	0	-
5.4.8(Leg height)	-	0	-
5.4(Dimension )	-	0	-
5.3 & 5.4.2(Thickness of components )	-	0	-
5.2.11.2(Flexing resistance)	-	0	-
5.2.11.2(Resistance to Fuel Oil)	-	0	-
5.2.11.2(Elongation at break)	-	0	-
5.2.11.2(Tensile Strength)	-	0	-
5.2.11.2(Hardness (Shore A))	-	0	-
5.2.11(Hardness (IRHD)-after ageing)	-	0	-
5.2.11(Flexing resistance)	-	0	-
5.2.11(Elongation at break)	-	0	-
5.2.11(Tensile Strength)	-	0	-
5.2.11(Hardness (IRHD))	-	0	-
5.2.11(Relative density )	-	0	-

Complete

02 May, 2024

-
-

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

36600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	0	-
Table 1(CLASS II)	-	0	-
5.2.2.1(General)	-	0	-
5.2.2.2(Height of upper)	-	0	-
5.2.2.3(Seat region)	-	0	-
5.3.2.1(Construction)	-	0	-
5.3.1.2(Upper/outsole bond strength)	-	600	-
5.3.2.2(Leakproofness)	-	200	-
5.3.2.3(Specific ergonomic features )	-	500	-
5.3.4.1(Slip resistance)	-	1500	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	0	-
5.3.4.3(Slip resistance on steel floor with glycerine )	-	0	-
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	0	-
5.3.2.5(Innocuousness )	-	23100	2100 for 1 parameter total 11 parameter 11 x 2100=23100
5.4.2.1(Upper)	-	0	-
5.4.2.2(Thickness )	-	0	-
5.4.2.3(Tear strenth)	-	600	-
5.4.2.4(Tensile properties)	-	600	-
5.4.2.5(Flexing resistance )	-	600	-
5.4.2.6(Water vapour permeability and coefficient )	-	600	-
5.4.2.7(pH value )	-	0	-
5.4.2.8(Hydrolysis)	-	500	-
5.4.2.9(Chromium VI content )	-	0	-
5.5.2.1(Tear strength )	-	0	-
5.5.2.2(Abrasion resistance )	-	700	-
5.5.2.3(Water vapour permeability and coefficient )	-	0	-
5.5.2.4(pH value )	-	0	-
5.5.2.5(Chromium VI content )	-	0	-
5.6(Tongue )	-	0	-
5.6.2.1(Tear strength )	-	0	-
5.6.2.2(pH value )	-	0	-
5.6.2.3(Chromium VI content )	-	0	-
5.7.2.1(Insole and insock )	-	0	-
5.7.2.2(Insole and insock )	-	0	-
5.7.2.3(Water absorption and desorption )	-	0	-
5.7.4.1(Abrasion resistance )	-	0	-
5.7.4.2(Abrasion resistance )	-	0	-
5.7.2.5(Chromium VI content )	-	0	-
5.8.2.1(Outsole)	-	0	-
5.8.1.1(Thickness )	-	0	-
5.8.1.2(Cleated area )	-	0	-
5.8.1.3(Cleat height)	-	0	-
5.8.2.2(Tear strength )	-	0	-
5.8.2.3(Abrasion resistance )	-	0	-
5.8.2.4(Flexing resistance )	-	0	-
5.8.2.5(Hydrolysis )	-	0	-
5.8.2.6(Interlayer bond strength )	-	0	-
6.2.1.1(Metallic anti-penetration insert )	-	500	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	0	-
6.2.1.2(Construction)	-	0	-
6.2.1.3(Dimensions )	-	0	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	0	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	0	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	0	-
6.2.2.1(Conductive footwear)	-	500	-
6.2.2.2(Antistatic footwear)	-	0	-
6.2.2.3(Electrically insulating footwear )	-	0	-
6.2.3.1(Heat insulation of sole complex )	-	1000	-
6.2.3.2(Cold insulation of sole complex)	-	2000	-
6.2.2.4(Energy absorption of seat region )	-	500	-
6.2.2.5(Water resistance )	-	500	-
6.2.2.6(Ankle protection)	-	0	-
6.2.7.1(Cut resistance foot wear)	-	500	-
6.2.7.2(Cut resistance foot wear)	-	0	-
6.2.7.3(Resistance to cutting)	-	0	-
6.2.7.4(Pentration resistance)	-	0	-
6.3.2.2(Upper- water penetration)	-	0	-
6.4.2.1(Resistance to hot contact)	-	600	-
6.4.2.2(Resistance to fuel oil)	-	500	-
7(a)(Marking)	-	0	-
7(b)(Marking)	-	0	-
7(c)(Marking)	-	0	-
7(d)(Marking)	-	0	-
7(e)(Marking)	-	0	-
7(e)(Marking)	-	0	-

Complete

02 May, 2024

-
-

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

38800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,Table 1(Class I, IS 15298)	-	0	-
4,Table 1(Class II, IS 15298)	-	0	-
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	0	-
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	0	-
5.2.3, Table 10 ,Design A(Seat Region)	-	0	-
5.3.1.1(Construction)	-	0	-
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	600	-
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	0	-
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	100	-
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	1000	-
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	600	-
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	400	-
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	0	-
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	200	-
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	0	-
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	0	-
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	0	-
5.3.6(Innocuousness)	-	23100	2100 for 1 parameter total 11 parameter 11x 2100=23100
5.4.1,Table 10(General)	-	0	-
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	0	-
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	600	-
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	600	-
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	0	-
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	600	-
5.4.7(Ph Value ; ISO 20344,6.9)	-	0	-
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	500	-
5.4.9(Chromium VI content; ISO 17075)	-	0	-
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	0	-
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	0	-
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	0	-
5.5.4(Ph Value ; ISO 20344,6.9)	-	0	-
5.5.5(Chromium VI content; ISO 17075)	-	0	-
5.6(Tongue - IS 15298 Part 2 )	-	0	-
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	0	-
5.6.2(Ph Value ; ISO 20344,6.9)	-	0	-
5.6.3(Chromium VI content; ISO 17075)	-	0	-
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	0	-
5.7.2(Ph Value ; ISO 20344,6.9)	-	0	-
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	0	-
5.7.4.1(Insole ; ISO 20344,7.3 )	-	0	-
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	0	-
5.7.5(Chromium VI content; ISO 17075)	-	0	-
5.8.1(Design, IS 15298 Part 2 )	-	0	-
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	0	-
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	100	-
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	0	-
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	0	-
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	0	-
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	0	-
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	0	-
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	0	-
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	500	-
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	0	-
6.2.1.2(Consruction)	-	0	-
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	0	-
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	0	-
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	0	-
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	0	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	500	-
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	0	-
6.2.2.3(Electrically insulating footwear; EN 50321)	-	0	-
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	1000	-
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	2000	-
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	500	-
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	500	-
6.2.6.1(Construction)	-	0	-
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	0	-
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	0	-
6.2.8.1(Design)	-	0	-
6.2.8.2(Construction)	-	0	-
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	500	-
6.2.8.4(Penetration Resistance)	-	0	-
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	0	-
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	600	-
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	0	-

Complete

02 May, 2024

-
-

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Performance test)	-	7650	IS 1989:Part -1 the total testing charges of both mechanical and chemical parameter is Rs-7650
4.1 (a)(Marking)	-	0	-
4.1 (b)(Marking)	-	0	-
4.1 (c)(Marking)	-	0	-
4.1 (d)(Marking)	-	0	-
4.1 (e)(Marking)	-	0	-
7.1(Design)	-	0	-
10.1(Finish)	-	0	-
10.3(Finish)	-	0	-
10.4(Finish)	-	0	-
11.1(Mass Boots with Leather Sole and Heel)	-	0	-
11.2(Mass Boots with Rubber Sole and Heel)	-	0	-
13(Design)	-	0	-
16.1(Finish)	-	0	-
16.2(Finish)	-	0	-
16.3(Finish)	-	0	-
16.4(Finish)	-	0	-
17.1(Mass Shoes with Leather Sole and Heel)	-	0	-
17.2(Mass Shoes with Rubber Sole and Heel)	-	0	-
18(Performance test)	-	0	-

Complete

02 May, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

CENTRAL LEATHER RESEARCH INSTITUTE

Sardar Patel Road Adyar, Opposite to Indian Institute Of Technology, Chennai, Tamil Nadu 600020, chennai, Chennai, Tamil Nadu, 600020

8610157276 [email protected]

Scope List