BIS - LIMS (Laboratory Information Management System)

BIS, Bengaluru Branch Office Laboratory (BNBOL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- [email protected]

Scope List

Reset

93 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Manufacture)	-
3.3 (Manufacture)	-
6.1 (Hydrostatic Test)	-
7.1 (Sizes and Mass)	-
7.2 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
8.5 (Permissible Deviation from a Straight Line)	-
9 (Coating)	-

Partial

-
-

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

Complete

-
-

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Actual bore)	-
6.2 (Manufacture Dimensions Table 2 )	-
6.2 (Manufacture Dimensions Table 2 )	-
6.4 (Manufacture )	-
6.5 (Manufacture )	-
6.6 (Manufacture )	-
6.7 (Manufacture )	-
6.8 (Manufacture )	-
6.8.1 (Manufacture )	-
6.9 (Manufacture )	-
6.9 (Manufacture )	-
6.9 (Manufacture )	-
6.9 (Manufacture )	-
6.10 (Manufacture )	-
6.10.1 (Manufacture )	-
6.12 (Door Faces)	-
6.13 (By-pass arrangements)	-
6.13.1 (By-pass arrangements)	-
6.13.1 (By-pass arrangements)	-
7.1 (Coating)	-
8.2 (Hydrostatic Body Test )	-
8.3 (Hydrostatic Seat Test)	-

Partial

-
-

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-

Partial

-
-

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
6.1 (Construction)	-
6.2 (Construction)	-
6.3 (Construction)	-
6.4 (Construction)	-
6.5 (Closure)	-
7.1 (Finish)	-
7.2 (Finish)	-
8 (Air Pressure Test)	-

Partial

-
-

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges )	-
6.1 (Manufacture- General)	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
6.3.3 Fig-1 (Position of Holes)	-
8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under)	-
8.2 (Packing -Each Package shall bear the following Particulars)	-

Partial

-
-

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-
6.2- Table 3 (PACKING)	-

Partial

-
-

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-
8.1 (MARKING- .)	-
8.1.1, (MARKING- )	-
9 (PACKING)	-

Partial

-
-

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
7 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.7 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

Partial

-
-

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.6 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

Partial

-
-

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
5.2 (Lid Thickness of the finished utensil, mm)	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 ( Nominal Size, mm)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-
8.4.2 (A coating of thickness 25 to 100 microns is generally required)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-
0.5 (Fabrication)	-

Partial

-
-

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 )	-
8 (Hydrostatic Test)	-
9.1,Table 2 & 3 (DI)	-
9.1,Table 2 & 3 (P)	-
9.1,Table 2 & 3 (g)	-
9.1,Table 2 & 3 (h)	-
9.1,Table 2 & 3 (K)	-
9.1,Table 2 & 3 (L)	-
9.1,Table 2 & 3 (M)	-
9.1,Table 2 & 3 (N)	-
9.1,Table 2 & 3 (f)	-
9.1,Table 4 (D)	-
9.1,Table 4 (a)	-
9.1,Table 4 (b)	-
9.1,Table 4 (s)	-
9.1,Table 4 (r)	-
9.1,Table 5 (D)	-
9.1,Table 5 (g)	-
9.1,Table 5 (a)	-
9.1,Table 5 (b)	-
9.1,Table 5 (c)	-
9.1,Table 5 (f)	-
9.1,Table 5 (s)	-
9.1,Table 5 (C)	-
9.1,Table 5 (Holes No)	-
9.1,Table 5 (Holes diameter)	-
9.1,Table 6 (Diameterof Bolts)	-
9.1&11.1,Table 7,8&9 (e)	-
9.1&11.1,Table 7,8&9 (l)	-
9.1&11.1,Table 7,8&9 (Mass (Approx))	-
9.1&11.1,Table 10 to13 (e)	-
9.1&11.1,Table 10 to13 (r)	-
9.1&11.1,Table 10 to13 (a)	-
9.1&11.1,Table 10 to13 (b)	-
9.1&11.1,Table 10 to13 (Mass (Approx))	-
9.1&11.1,Table 14 (Nominal Diameter)	-
9.1&11.1,Table 14 (e)	-
9.1&11.1,Table 14 (e1)	-
9.1&11.1,Table 14 (l)	-
9.1&11.1,Table 14 (h)	-
9.1&11.1,Table 14 (Mass (Approx))	-
9.1&11.1,Table 15 (e)	-
9.1&11.1,Table 15 (l)	-
9.1&11.1,Table 15 (Nominal Diameter)	-
9.1&11.1,Table 15 (e1)	-
9.1&11.1,Table 15 (k)	-
9.1&11.1,Table 15 (Mass (Approx))	-
9.1&11.1,Table 16 (e)	-
9.1&11.1,Table 16 (l)	-
9.1&11.1,Table 16 (h)	-
9.1&11.1,Table 16 (Mass (Approx))	-
9.1&11.1,Table 17 (e1)	-
9.1&11.1,Table 17 (l1)	-
9.1&11.1,Table 17 (Nominal Diameter)	-
9.1&11.1,Table 17 (e2)	-
9.1&11.1,Table 17 (l2)	-
9.1&11.1,Table 17 (l3)	-
9.1&11.1,Table 17 (l)	-
9.1&11.1,Table 17 (Mass)	-
9.1&11.1,Table 18 (a)	-
9.1&11.1,Table 18 (P)	-
9.1&11.1,Table 18 (Mass (Approx))	-
9.1&11.1,Table 19 (DC)	-
9.1&11.1,Table 19 (e)	-
9.1&11.1,Table 19 (a)	-
9.1&11.1,Table 19 (l)	-
9.1&11.1,Table 19 (Mass (Approx))	-
9.1&11.1,Table 20 (DI)	-
9.1&11.1,Table 20 (h)	-
9.1&11.1,Table 20 (Mass (Approx))	-
9.1&11.1,Table 21 (e)	-
9.1&11.1,Table 21 (r)	-
9.1&11.1,Table 21 (a)	-
9.1&11.1,Table 21 (b)	-
9.1&11.1,Table 26 (e1)	-
9.1&11.1,Table 21 (Mass (Approx))	-
9.1&11.1,Table 22 (e)	-
9.1&11.1,Table 22 (r)	-
9.1&11.1,Table 22 (a)	-
9.1&11.1,Table 22 (b)	-
9.1&11.1,Table 22 (c)	-
9.1&11.1,Table 22 (a)	-
9.1&11.1,Table 22 (f)	-
9.1&11.1,Table 22 (g)	-
9.1&11.1,Table 23 (e)	-
9.1&11.1,Table 23 (r)	-
9.1&11.1,Table 23 (a)	-
9.1&11.1,Table 23 (l)	-
9.1&11.1,Table 23 (Mass (Approx))	-
9.1&11.1,Table 24 (e)	-
9.1&11.1,Table 24 (l)	-
9.1&11.1,Table 24 (Nominal Diameter)	-
9.1&11.1,Table 24 (e1)	-
9.1&11.1,Table 24 (h)	-
9.1&11.1,Table 24 (Mass (Approx))	-
9.1&11.1,Table 25 (e)	-
9.1&11.1,Table 25 (l)	-
9.1&11.1,Table 25 (h)	-
9.1&11.1,Table 25 (Mass (Approx))	-

Partial

-
-

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Nominal Pressures)	-
5.1 (Nominal Sizes)	-
5.1.1 (Actual Bore)	-
7.2.1 (Manufacture - Bodies and Bonnets)	-
7.2.1 (Manufacture - Bodies )	-
7.2.2 (Manufacture - Bodies and Bonnets)	-
7.2.3 (Manufacture)	-
7.2.4 (Manufacture)	-
7.2.4 (Manufacture)	-
7.2.4 (Manufacture)	-
7.3 Table 3A 1 (Flanges)	-
7.3 Table 3A 2 (Flanges)	-
7.3 Table 3A 3 (Flanges)	-
7.3 Table 3A 4 (Flanges)	-
7.3 Table 3A 5 (Flanges)	-
7.3 Table 3A 6 (Flanges)	-
7.4.1 (Wedges )	-
7.4.1 (Wedges)	-
7.4.1 (Wedges)	-
7.4.2 (Wedge Faces)	-
7.5 (Guides and Lugs)	-
7.5 (Guides and Lugs)	-
7.5 (Guides and Lugs)	-
7.5.1 (Guides and Lugs)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,4 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,5 (Dimension of Stem and Wedge Nuts)	-
7.7.2 (Stem and Wedge Nuts)	-
7.7.3 (Stem and Wedge Nuts)	-
7.7.4 (Stem and Wedge Nuts)	-
7.7.4 (Stem and Wedge Nuts)	-
7.9 (Height of Valve)	-
7.1 (Gears)	-
7.11 (Hand Wheel)	-
7.11 (Hand Wheel)	-
7.11 (Hand Wheel)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.14 (By Pass Arrangements)	-
7.14 (By Pass Arrangements)	-
8 (Accessories or Optical Features)	-
9 (Coating)	-
10.1 Annex B-1 (Hydraulic Test)	-
10.1 Annex B-2 (Hydraulic Test)	-
10.2 (Flaw Detection Test for Stems)	-

Partial

-
-

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.6 (Listeria monocytogenes)	-
5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia))	-
5.6 (Spore count, Aerobic (Bacillus cereus))	-
5.6 (Salmonella)	-
5.6 (Coagulase positive Staphylococcus aureus)	-
5.6 (Escherichia coli)	-
5.6 (Coliform count )	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Listeria monocytogenes)	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Scorched particles)	-
5.6 (Titratable acidity (lactic acid))	-
5.6 (Total ash (on dry basis))	-
5.6 (Insolubility index)	-
5.6 (Milk fat)	-
5.6 (Milk protein in milk solids not fat)	-
5.6 (Moisture)	-
5.2 (Absence of extraneous matter, added colour and added flavour)	-
4 (Description)	-
Cl 5.4 (The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-
5.6 (Insolubility index)	-

Complete

-
-

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5 (pH of Aqueous Extract )	-

Complete

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Construction and workmanship)	-
7.2 (Flow path in emitters)	-
7.3.1 (Resistance to Hydrostatic pressure)	-
7.3.2 (Resistance to Hydrostatic pressure)	-
7.3.3 (Resistance to Hydrostatic pressure)	-
7.4.1 (Emitter Pull Out In-line emitters)	-
7.4.2 (Emitter Pull Out On-line emitters)	-
8.1.2 (Uniformity of Emission Rate Unregulated emitters)	-
8.1.2 (Uniformity of Emission Rate Unregulated emitters)	-
8.1.3 (Uniformity of Emission Rate Regulated emitters)	-
8.2.2 (Emission rate as a function of inlet pressure Unregulated emitters)	-
8.2.3 (Emission rate as a function of inlet pressure Regulated emitters)	-
8.3 (Determination of Emitter Exponent)	-
4 (Classification)	-

Complete

-
-

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Tables 2 to 9 (Types)	-
5.1 Tables 2 to 9 (2) (Size of Hinge)	-
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (8) (Number of Screw Holes)	-
5.1 Tables 2 to 9 (9) (Holes for Screw No.)	-
6.1 (General)	-
6.1 (General)	-
6.1 (General)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
6.4.2.1 (Position of Holes)	-
6.4.2 (X)	-

Partial

-
-

IS 12933 : Part 1 (2003)

Solar flat plate collector - Specification: Part 1 requirements (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
7.1.1 (Static Pressure Leakage Test)	-
7.2.5 (Impact Resistance Test)	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-
4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-

Partial

-
-

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.3 (Designation)	-
5 (Material-Rolled Steel Section)	-
5 (Material-Coupling Section)	-
5 (Material-Glass Panels)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel )	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel plate)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay )	-
6.2.3 (Peg Stay - Dimensions-A)	-
6.2.3 (Peg Stay - Dimensions-B)	-
6.2.3 (Peg Stay - Dimensions-C)	-
6.2.3 (Peg Stay - Dimensions-D)	-
6.2.3 (Peg Stay - Dimensions-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
6.2.3 (Peg Stay - Dimensions-G)	-
6.2.3 (Peg Stay - Dimensions-H)	-
6.2.3 (Peg Stay - Dimensions-J)	-
6.2.3 (Peg Stay - Dimensions-K)	-
6.2.3 (Peg Stay - Dimensions-L)	-
6.2.3 (Peg Stay - Dimensions-M)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
7.2 Table 2 (Lugs-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-
5 (Material-Rolled Steel Section)	-
5 (Material-Coupling Section)	-
5 (Material-Glass Panels)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel )	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel plate)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay )	-
6.2.3 (Peg Stay - Dimensions-A)	-
6.2.3 (Peg Stay - Dimensions-B)	-
6.2.3 (Peg Stay - Dimensions-C)	-
6.2.3 (Peg Stay - Dimensions-D)	-
6.2.3 (Peg Stay - Dimensions-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
6.2.3 (Peg Stay - Dimensions-G)	-
6.2.3 (Peg Stay - Dimensions-H)	-
6.2.3 (Peg Stay - Dimensions-J)	-
6.2.3 (Peg Stay - Dimensions-K)	-
6.2.3 (Peg Stay - Dimensions-L)	-
6.2.3 (Peg Stay - Dimensions-M)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
7.2 Table 2 (Lugs-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-

Partial

-
-

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.2.1 (Material)	-
4.2.1 (Material)	-
4.2.2 (Handle)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-

Partial

-
-

IS 12600 (1989)

Portland cement, low heat - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 v ( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 - Table - 1 note 2 (Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-
5.2 (Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-

Partial

-
-

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-

Partial

-
-

IS 10086 (1982)

Specificaton for moulds for use in tests of cement and concrete

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Construction)	-
Cl 5.3 (Arangement for fastening / Clamping)	-

Partial

-
-

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

Complete

-
-

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 (Flavour and Taste)	-
3.4.5 (Moisture)	-
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.4.5 (Titratable acidity (lactic acid))	-

Complete

-
-

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (Copper Content)	-
Cl. 2.3, Table-1 (Suspensibility)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-

Complete

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.1 (General Requirement)	-

Complete

-
-

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.3 (Carbon Black Content )	-
4.2.3 (Carbon Dispersion Test)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.3 (Types and Features )	-
7.1.1 (Resistance to Deformation)	-
7.1.2 (Resistance to Deformation)	-
7.2 (Resistance to Impact)	-
7.4 (Tensile Strength)	-
7.5 (Flexural Modulus)	-
7.6 (overall Migration)	-
6.1 (Finish)	-
9.2.1 (Man-Hole and Hand-Hole Lids)	-
9.2 (Man-Hole and Hand-Hole Lids)	-
9.1 (Lid Thickness)	-
7.3 (Test for Top Load Resistance)	-
6.1 (Finish)	-
5.4 (Wall Thickness above effective height)	-
5.2 Table 2 (7) (Minimum Wall Thickness)	-
5.1 Table 1 (7) (Minimum Weight of Tank (Without Lid))	-
9.1 (Man-Hole and Hand-Hole Lids)	-
7.6 (overall Migration)	-

Partial

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-
5 and Table 1 (DIMENSIONS OF PIPES - outside diameters)	-
5 and Table 1 (DIMENSIONS OF PIPES - wall thickness shall)	-
7.2 (Reversion Test)	-
3.1 (Class of Pipe)	-
6.1 (Visual Appearance)	-
7.1 (Hydraulic Characteristics)	-
7.1 (Hydraulic Characteristics)	-

Partial

-
-

IS 455 (2015)

Portland slag cement - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-
6 - Table - 1 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-
6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985)	-
6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-
7 Table 1 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 Table 1 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 Table 1 i (Fineness IS 4031(Part 2))	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Bengaluru Branch Office Laboratory (BNBOL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- [email protected]

Scope List