BIS - LIMS (Laboratory Information Management System)

Intertek India Private Limited

Plot No 290 Udyog Vihar Phase II ,Gurugram ,Haryana 122016, GURUGRAM, Gurugram, Haryana, 122016

9811046894 [email protected]

Scope List

Reset

12 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

Respiratory protective devices - Filtering half masks

257000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.3(Practical Performance Test)	-	44600.00	-
5.4.1(Total Inward Leakage (AR-5 Samples) )	-	32400.00	-
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	36400.00	-
Cl 5.6(Flammability)	-	8640.00	-
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	23400.00	-
Cl 5.9(Field of Vision)	-	7200.00	-
Cl 5.10(Inhalation and Exhalation Valves)	-	6480.00	-
Cl 5.11(Breathing Resistance)	-	45360.00	-
Cl 5.12(Clogging (Coal & Dolomite))	-	43200.00	-

Complete

-
-

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

Medical textiles – Surgical gowns and surgical drapes

241000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1 (i.)(Impact penetration)	-	5760.00	-
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	5760.00	-
7.1 Table 1 (iii.)(Blood resistance)	-	7920.00	-
7.1 Table 1 (iv.)(Viral resistance)	-	15840.00	-
7.1 Table 1 (v.)(Particle release)	-	10800.00	-
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	4896.00	-
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	4320.00	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	15840.00	-
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	15840.00	-
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	15840.00	-
7.1 Table 1 (xii.)(Moisture vapour transmission rate (Max.))	-	10800.00	-

Complete

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Medical textiles – Coveralls for COVID 19

4613.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-	2640	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	2640	-

Complete

-
-

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

Medical textiles - Surgical face masks

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	7900	-
4.2 Table 1 ii)(Differential Pressure)	-	6700	-
4.2 Table 1 iii)(Splash Resistance)	-	17500	-
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	7900	-

Complete

-
-

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

Single - Use medical examination gloves

14300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Width corresponding to size code (dimension w,Figure 1))	-	500	-
6.2(Watertightness)	-	700	-
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	550	-
6.3.2 & Table 3(Minimum Elongation at break before accelerated ageing)	-	550	-
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	2550	-

Complete

-
-

IS 13422 (1992)

Disposable surgical rubber gloves specification

Disposable surgical rubber gloves

10350.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(General Characteristics and Dimensions)	-	500	-
5.3 and Table 2( Tensile Strength Before Ageing)	-	550	-
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	2550	-
5.4(Sterility)	-	10000	-
5.5(Airtight Test)	-	700	-
5.3 and Table 2( Elongation at Break Before Ageing)	-	550	-
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	2550	-

Complete

-
-

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

Surgical Rubber Gloves

5888.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	300	-
4.2(Dimensions Fig 1 and Table 1)	-	2000	-
4.3(Thickness)	-	300	-
4.4.1(Physical Properties)	-	550	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	2550	-
4.4.3(After heat ageing in autoclave)	-	5000	-
4.4.4(Tension Set)	-	550	-
4.5(pH of Aqueous Extract )	-	500	-

Complete

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	4000 /component
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	4000 /component

Complete

-
-

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

38480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	2640		2640/- per component

Complete

-
-

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2500	INR 2500/ material for complete all 8 HM.

Complete

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Flammability

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500		-

Complete

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	Charges for Drop Test
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	500	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	500	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	500	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	500	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	500	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	500	-
4.3.2 - 5.21( Expanding materials)	-	500	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	500	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	500	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	500	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	500	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	500	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	-
4.6.2(Edges-Functional sharp edges)	-	500	-
4.6.4( Edges-Edges on moulded toys)	-	500	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	500	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	-
4.7.2 - a(Points-Functional sharp points)	-	500	-
4.7.2 - b(Points-Functional sharp points)	-	500	-
4.7.3 (Wooden toys)	-	500	-
4.8.1(Projections-General requirments)	-	500	-
4.8.1(Projections-General requirments)	-	500	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	500	-
4.9 - c( Metal wires and rods)	-	500	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	-
4.3.1(Material quality)	-	500	-
4.1(Normal use)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	500	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	500	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	500	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	-
4.11.6(Cords- Electrical cables)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	500	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	-
4.11.10(Cords-Cords on toy bags)	-	500	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	500	-
4.11.11( Cords, strings and lines for flying toys- )	-	500	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	500	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	500	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	500	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	500	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.2(Aquatic toys)	-	500	-
4.2(Aquatic toys)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.21(a)(braking)	-	500	-
4.21(b)(braking)	-	500	-
4.22.1(Toy bicycles-Instructions for use)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.25(Liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	500	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	500	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	500	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	500	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	500	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	500	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	500	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	500	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	500	-
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	-
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	500	-
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	-
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	500	-
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	500	-
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	500	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	500	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	500	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	500	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Intertek India Private Limited

Plot No 290 Udyog Vihar Phase II ,Gurugram ,Haryana 122016, GURUGRAM, Gurugram, Haryana, 122016

9811046894 [email protected]

Scope List