BIS - LIMS (Laboratory Information Management System)

Yadav Measurements Pvt Ltd

Plot no. F 373-375, RIICO Bhamashah Industrial Area, Kaladwas, Udaipur (Rajasthan)-313003, Udaipur, Udaipur, Rajasthan, 313003

2942654101 [email protected]

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

84150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5 & 12.7.6.2(Impulse voltage test)	-	3650	-
9.5 & 12.7.6.3(a.c. voltage test)	-	300	-
12.7.6.4(Insulation resistance test)	-	300	-
11.1(Limits of Error Due to Variation of the Current)	-	1150	-
12.15(Interpretation of Test Results)	-	800	-
12.13 & 11.5(Starting Current)	-	300	-
11.4.2 & 12.12(Running with No-Load)	-	300	-
11.6 & 12.14(Meter Constant)	-	300	-
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	1950	-
11.7 & 12.16(Repeatability of Error Test)	-	3125	-
11.2(Voltage variation)	-	430.7	-
11.2(Frequency variation)	-	430.7	-
11.2(Wave form: 10 percent of third harmonic in the current)	-	430.7	-
11.2(Reversed phase sequence)	-	430.7	-
11.2(Voltage unbalance)	-	430.7	-
11.2(Auxiliary voltage ± 15 percent)	-	430.7	-
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	430.7	-
11.2(Continuous magnetic induction of external origin)	-	430.7	-
11.2(Magnetic induction of external origin 0.5 mT)	-	430.7	-
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	430.7	-
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	430.7	-
11.2(Electrical fast transient burst)	-	430.7	-
11.2(Electromagnetic HF fields)	-	430.7	-
9.1 & 12.7.1(Power Consumption)	-	375	-
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	1000	-
9.2.3 & 12.7.3(Short Time Over Current)	-	1625	-
9.4 & 12.7.5(Influence of Heating)	-	1525	-
9.3 & 12.7.4(Influence of Self-heating)	-	650	-
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	800	-
"12.8.6(Radio Interference Measurement)	-	13300	-
"12.8.4(Fast Transient Burst Test)	-	3650	-
"12.8.3(Test for Immunity to Electromagnetic HF Fields)	-	12800	-
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	3650	-
12.6.1(Dry heat test)	-	950	-
12.6.2(Cold Test)	-	4700	-
12.6.3(Damp Heat Cycle Test)	-	4700	-
12.3.2(Vibration test)	-	6100	-
12.3.1(Shock test)	-	5300	-
12.3.3(Spring hammer test)	-	200	-
12.5(Protection against penetration of dust and water)	-	2025	-
12.4(Test of resistance to heat and fire)	-	3050	-
6.1(General)	-	1	-
6.2(Meter Case)	-	1	-
6.3(Window)	-	1	-
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	1	-
6.5(Terminal Cover(s))	-	1	-
6.6(Clearance and Creepage Distance)	-	1	-
6.7(Insulating Encased Meter)	-	1	-
6.10(Display of Measured Values)	-	1	-
6.11(Output Device)	-	1	-
7.1(Name Plate)	-	1	-
7.2(Connections, Diagrams and Terminal Marking)	-	1	-
"12.8.5(Surge Immunity Test)	-	12000	-

Complete

31 May, 2022

-
-

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

84150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.2(Impulse voltage test)	-	3650	-
12.7.6.3(ac high voltage test)	-	300	-
12.7.6.4(Insulation resistance test)	-	300	-
11.1(Test on limits of error due to variation of current)	-	1150	-
12.15 & 11.6(Test of meter constant)	-	300	-
12.14 & 11.5(Test of starting condition)	-	300	-
12.13 & 11.4(Test of no-load condition)	-	300	-
12.12 & 11.3(Test of ambient temperature influence)	-	1950	-
11.2(Test on limits of error due to other influence quantities)	-	5600	-
12.7.1(Test of power consumption)	-	375	-
12.7.2(Test of influence of supply voltage)	-	1000	-
12.7.3(Test of influence of short time over currents)	-	1625	-
12.7.4(Test of Influence of self heating)	-	625	-
12.7.5(Test of influence of heating)	-	1525	-
12.8(Test of immunity to earth/phase fault)	-	800	-
12.9.6(Radio Interference Measurement)	-	13300	-
12.9.4(Fast transient burst test)	-	3650	-
12.9.2(Test of Immunity to electrostatic discharge)	-	3650	-
12.9.3(Test of Immunity to electromagnetic HF field)	-	12800	-
12.9.5(Surge Immunity Test)	-	12000	-
12.6.1(Dry heat test)	-	950	-
12.6.2(Cold test)	-	4700	-
12.6.3(Damp heat cyclic test)	-	4700	-
12.3.2(Vibration test)	-	6100	-
12.3.1(Shock test)	-	5300	-
12.3.3(Spring hammer test)	-	200	-
12.5(Test of protection against penetration of dust and water)	-	2025	-
12.4(Test of resistance to heat and fire)	-	3050	-
6.1(General)	-	1	-
6.2(Meter Case)	-	1	-
6.3(Window)	-	1	-
6.4(Terminals, terminal block and protective earth terminal)	-	1	-
6.5(Terminals covers and Extended Terminal Cover)	-	1	-
6.6(Clearance and creepage distances)	-	1	-
6.7(Insulating encased meter)	-	1	-
6.10(Display of measured values)	-	1	-
6.11(Output device)	-	1	-
7.1(Name Plate)	-	1	-
7.2(Connection diagrams and terminal marking)	-	1	-
12.16 & 11.7(Test of repeatability of error)	-	3125	-

Complete

31 May, 2022

-
-

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6.1(As per table 10 & 11, cl 5.6.1)	-	1520	Rs 520000/- for UC1 single phase meter.,Rs 546660/- for UC1 three phase meter,Rs 693330/- for UC2 or UC3 single phase meter,Rs 800000/- for UC2 or UC3 three phase meter
4.6.2(As per table 12)	-	20000	-
4.6.3(Limits of error due to Ambient temperature Variation)	-	4000	-
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	6500	-
5.2.1(As per cl 12.3.3 of IS 13779)	-	1250	-
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	6000	-
5.2.3(As per IS 9000 (Part 8))	-	8000	-
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	2500	-
5.2.5(Protection against penetration of water (IP1X))	-	2500	-
5.2.5(Protection against penetration of dust (IP5X))	-	2500	-
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	9000	-
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	10500	-
5.4.1(As per 4.4.1.1)	-	2000	-
5.4.2(As per 4.4.2.1)	-	2000	-
5.4.3(Table 8, as per cl4.4.3)	-	140000	-
5.4.4(Table 9, and cl 4.4.4)	-	2000	-
5.4.5(As per cl 4.4.5)	-	2000	-
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	7500	-
5.4.6.3(Table 15, power source 500 VA)	-	2000	-
5.4.6.4(500±50V dc)	-	1500	-
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	6500	-
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	58000	-
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	7500	-
5.5.5(according to IEC 62052-11)	-	42000	-
5.5.6(according to IEC 61000- 4-5)	-	12000	-
4.6.6.2.2 & G2(Normal operation)	-	7000	-
4.6.6.2.2 & G3(Electrical endurance)	-	148500	-
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	7000	-
4.6.6.2.2 & G5(Fault current making capacity)	-	56000	-
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	38000	-
4.6.6.2.2 & G7(Minimum switched current)	-	9000	-
4.6.6.2.2 & G8(Dielectric strength)	-	18500	-
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	5000	-
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	5000	-
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	15000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	10500	-
5.5.6(Surge Immunity Test)	-	1	-
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	25000	-
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	1	-
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	10000	-
6(Functional Requirements)	-	33500	-
5.9(Test of Consumption-Based charging function)	-	3500	-
5.10(Test of Time-Based charging function)	-	3500	-
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	111200	Applicable only for UC1
4.2.12.3(Keypad Interface)	-	2500	-
4.4.2(Table 7)	-	5000	-
4.2(Mechanical Requirements)	-	22500	-
5.6.5(As per cl 4.6.5)	-	1000	-
5.6.4(As per cl 4.6.3, Table 13)	-	1000	-
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	1000	-

Complete

31 May, 2022

-
-

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

306700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test on limits of error)	-	1150	-
6.12(Test of starting condition)	-	300	-
6.12(Test of meter constant)	-	300	-
6.12(Test of no-load condition)	-	300	-
6.12(Test of ambient temperature influence)	-	400	-
6.12(Test of repeatability of error)	-	3125	-
6.12(Test of influence quantities)	-	6000	-
6.10.1(Test of power consumption)	-	375	-
6.10.2(Test of influence of supply voltage)	-	950	-
6.10.3(Test of influence of short time over currents)	-	1500	-
6.10.4(Test of influence of self-heating)	-	600	-
6.10.5(Test of influence of heating)	-	1400	-
6.11(Radio interference measurement)	-	25000	-
6.11(Fast transient burst test)	-	7500	-
6.11(Test of immunity to electrostatic discharge)	-	6500	-
6.11(Test of immunity to electromagnetic HF field)	-	25000	-
6.9(Dry heat test)	-	4700	-
6.9(Cold test)	-	4700	-
6.9(Damp heat cyclic test)	-	8000	-
6.5(Vibration test)	-	5625	-
6.5(Shock test)	-	4850	-
6.5(Spring hammer test)	-	175	-
6.5(Test of protection against penetration of dust and water)	-	1875	-
6.4(Test of resistance to heat and fire)	-	2800	-
6.10.6(Impulse voltage test)	-	3375	-
6.10.6(ac high voltage test)	-	500	-
6.10.6(Insulation test)	-	500	-
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	120000	-
10.0(Smart Meter Functional Requirements)	-	5000	-
8, 9.5(Smart Meter Communicability)	-	35000	-
6.10.7(Test of immunity to earth/phase fault)	-	4500	-
6.11(Surge Immunity test)	-	10500	-
9.3(Test of Display)	-	300	-
9.4(Test for Data Exchange Protocol)	-	1	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	1	-
Note b of Table 1(Access and data read test)	-	1	-
6.2(General Constructional requirements)	-	5500	-
6.3(Clearance and creepage distances)	-	1	-
6.8(Marking of meters Name plate)	-	1800	-
6.6(Display of measured values)	-	1800	-
6.7(Output device)	-	4800	-

Complete

31 May, 2022

-
-

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

668000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	575	Rs440000/- for the UC1 single phase meter , Rs 533000/- for UCI three phase meter, Rs 560000/- for UC2 or UC3 single phase meter,Rs 668000/- for UC2 or UC3 three phase meters.
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	1520	-
cl. 11.5 of IS 13779(Starting Current)	-	690	-
cl. 11.6 of IS 13779(Meter Constant)	-	690	-
12.13 of IS 13779(Test of No-Load Condition)	-	690	-
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	0	-
4.4.4 of IS 15844(Influence of Self-Heating)	-	1380	-
4.4.5 of IS 15844(Influence of Heating)	-	600	-
12.17 of IS 13779(Repeatability of Error Test )	-	3450	-
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	1200	-
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	900	-
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	10500	-
6.10.1(Test of power consumption)	-	600	-
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	600	-
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	24000	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	8500	-
12.6.1 of IS 13779(Dry Heat Test)	-	9500	-
12.6.2 of IS 13779(Cold Test)	-	9500	-
12.3.2 of IS 13779(Vibration Test)	-	6100	-
12.3.1 of IS 13779(Shock Test)	-	6000	-
12.3.3 of IS 13779( Spring Hammer Test)	-	600	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	5750	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	120000	Applicable only for UC1
7.2, 10.4(Normal operation (G-2))	-	7000	-
7.2, 10.4(Electrical endurance (G-3))	-	145000	-
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	6720	-
7.2, 10.4(Fault current making capacity (G-5))	-	56000	-
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	35000	-
7.2, 10.4(Minimum switched current (G-7))	-	7500	-
7.2, 10.4(Dielectric strength (G-8))	-	10500	-
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	3450	-
6.11(Radio interference measurement)	-	58000	-
6.11(Fast transient burst test)	-	6935	-
6.11(Test of immunity to electrostatic discharge)	-	6600	-
6.11(Test of immunity to electromagnetic HF field)	-	46000	-
6.11(Surge Immunity test)	-	10500	-
6.5(Protection against penetration of dust and water)	-	3500	-
10.5(Test for Data Exchange Protocol)	-	135000	-
10.6.2(Test for Smart meter communicability )	-	6000	-
10.3(Test of Display)	-	2000	-
11(Smart Meter Functional Requirement)	-	6000	-
6.2(General and constructional requirements)	-	3000	-
6.3(Clearance and creepage distances)	-	3000	-
6.8(Marking of smart meters Name plate)	-	3000	-
6.8(BIS Standard Mark)	-	3000	-
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.7.1 of IS 13779(Test of Power Consumption)	-	1500	-
12.9.2 of IS 13779(Test for Immunity to Electrostatic Discharge (ESD))	-	1	-
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	1	-
12.9.5 of IS 13779(Radio Interference Measurement)	-	1	-
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	0	-
Note 1b of Table 1(Access and data read test)	-	0	-
Note 1c of Table 1(Remote disconnect/connect)	-	0	-
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	0	-
12.5 a) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	0	-
6.6(Display of measured values)	-	1	-
6.7(Output device)	-	4800	-
6.8(Connection diagrams and terminal marking)	-	3150	-

Complete

31 May, 2022

-
-

IS 16227 : Part 2 (2016)

Instrument transformers: Part 2 additional requirements for current transformers

41875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.13.201.1(Terminal markings: General rules)	-	750	-
6.13.201.2(Method of marking)	-	1	-
6.13.201.3(Markings to be used)	-	1	-
6.13.201.4(Indication of relative polarities)	-	1	-
7.2.2(Temperature-rise test)	-	3750	-
7.2.201(Short-time current tests)	-	13500	-
7.2.6.203(Test for composite error of class P and PR protective current transformers)	-	625	-
7.2.6.201(Test for ratio error and phase displacement of measuring current transformers)	-	10000	-
7.2.6.202(Determination of the instrument security factor (F S) of measuring current transformers)	-	1250	-

Complete

31 May, 2022

-
-

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.3(ac Voltage test)	-	570	PRICE FOR FULL TYPE TEST Rs 146667/- for single phase meter. Rs 160000/- for three phase meter.
12.7.6.2(Impulse voltage test)	-	7000	-
12.7.6.4(Insulation resistance test)	-	570	-
12.16 a)(Limits of Error and Interpretation or Test Results)	-	1	-
12.16 b)(Limits of Error and Interpretation or Test Results)	-	1	-
12.16 c)(Limits of Error and Interpretation or Test Results)	-	1	-
12.14(Test of Starting Conditions)	-	570	-
12.15(Test of Meter Constant/Registration)	-	570	-
12.13(Test of No-Load Condition)	-	570	-
12.12(Test ofAmbient Temperature Influence)	-	3705	-
12.17(Repeatability of Error Test )	-	5937.5	-
12.11(Test of Iniluence Quantities)	-	10640	-
12.7.1(Test of Power Consumption)	-	712.5	-
12.7.2(Test of Influence of Supply Voltage)	-	1900	-
12.7.3( Test of Influence of Short-time Overcurrents)	-	3087.5	-
12.7.5(Test of Influence of Heating)	-	2898	-
12.7.4(Test of Influence of Self-Heating)	-	1187.5	-
12.8(TestorImmunity to Earth Fault)	-	1520	-
12.9.5(Radio Interference Measurement)	-	19000	-
12.9.4(FastTransient BurstTest)	-	6935	-
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	6935	-
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	27320	-
12.6.1(Dry Heat Test)	-	8000	-
12.6.2(Cold Test)	-	8930	-
12.6.3( Damp Heat Cycle Test)	-	8930	-
12.3.2(Vibration Test)	-	11590	-
12.3.1(Shock Test)	-	7070	-
12.3.3( Spring Hammer Test)	-	380	-
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	1738	-
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	1739	-
12.4(Testof Resistance to Heat and Fire )	-	5795	-
6.1(General)	-	500	-
6.2(Meter case)	-	500	-
6.3(Window)	-	1	-
6.4(Terminals, terminal block and protective earth terminal)	-	500	-
6.5(Terminal Cover(s))	-	1	-
6.6(Clearance and creepage dis¬t¬ances)	-	500	-
6.7(Insulating encased meter)	-	1	-
6.10(Display of measured values)	-	1	-
6.11(Output device)	-	1	-
7.2(Connection diagrams and terminal marking)	-	1000	-
7.1.1(BIS Standard Mark)	-	1	-
7.1 a)(MARKING OF METERS : Name Plate )	-	1	-
7.1 b)(MARKING OF METERS : Name Plate )	-	1	-
7.1 c)(MARKING OF METERS : Name Plate )	-	1	-
7.1 d)(MARKING OF METERS : Name Plate )	-	1	-
7.1 e)(MARKING OF METERS : Name Plate )	-	1	-
7.1 f)(MARKING OF METERS : Name Plate )	-	1	-
7.1 g)(MARKING OF METERS : Name Plate )	-	1	-
7.1 h)(MARKING OF METERS : Name Plate )	-	1	-
7.1 j)(MARKING OF METERS : Name Plate )	-	1	-
7.1 k)(MARKING OF METERS : Name Plate )	-	1	-
7.1 m)(MARKING OF METERS : Name Plate )	-	1	-
7.1 p)(MARKING OF METERS : Name Plate )	-	1	-
7.1 n)(MARKING OF METERS : Name Plate )	-	1	-
11.1(Limits of Error and Interpretation or Test Results)	-	1200	-

Complete

31 May, 2022

-
-

IS 14697 (1999)

AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification

168000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Limits of Error Due to Variation of the Current)	-	2277	-
12.15 a)(Limits of error and Interpretation of Test Results )	-	1	-
12.15 b)(Limits of error and Interpretation of Test Results )	-	1	-
12.15 c)(Limits of error and Interpretation of Test Results )	-	1	-
12.13(Test of Starting Conditions)	-	594	-
12.12(Test of no-load condition)	-	594	-
12.14(Test of meter constant)	-	594	-
12.11(Test of ambient temperature influence)	-	3861	-
12.16(Test of repeatability of error)	-	6188	-
12.7.1(Test of Power Consumption )	-	743	-
12.7.2(Test of Influence of Supply Voltage)	-	1980	-
12.7.3(Test of Influence of Short-Time Over Currents)	-	3218	-
12.7.4(Test of influence of self-heating)	-	1238	-
12.7.5(Test of Influence of Heating )	-	600	-
12.17(Test of immunity to earth/phase fault)	-	1395	-
12.8.5(Radio interference measurement)	-	14500	-
12.8.4(Fast transient burst test)	-	7227	-
12.8.2(Test of immunity to electrostatic discharge)	-	7227	-
12.8.3(Test of immunity to electromagnetic HF field)	-	26000	-
12.6.1(Dry heat test)	-	8200	-
12.6.2(Cold test)	-	9306	-
12.6.3(Damp heat cyclic test)	-	9306	-
12.3.2(Vibration test)	-	12078	-
12.3.1(Shock test)	-	7494	-
12.3.3(Spring hammer test)	-	575	-
12.5 a)(Test of Protection Against Penetration of Dust )	-	5207	-
12.5 b)( Protection against penetration of water)	-	5208	-
12.4(Test of Resistance to Heat and Fire)	-	6039	-
12.7.6.2(Impulse voltage test )	-	7227	-
12.7.6.3(ac Voltage test)	-	594	-
12.7.6.4(Insulation resistance test)	-	594	-
6.1(General)	-	500	-
6.2(Meter case)	-	500	-
6.3(Window)	-	1	-
6.4(Terminals, terminal block and protective earth terminal)	-	2700	-
6.5(Terminal Cover(s))	-	1	-
6.6(Clearance and creepage distances)	-	500	-
6.7(Insulating encased meter)	-	1	-
6.10(Display of measured values)	-	1	-
6.11(Output device)	-	1	-
7.2(Connection Diagrams and Terminal Marking)	-	1	-
7.1 a)( MARKING OF METERS: Name Plate )	-	500	-
7.1 b)( MARKING OF METERS: Name Plate )	-	1	-
7.1 c)( MARKING OF METERS: Name Plate )	-	1	-
7.1 d)( MARKING OF METERS: Name Plate )	-	1	-
7.1 e)( MARKING OF METERS: Name Plate )	-	1	-
7.1 f)( MARKING OF METERS: Name Plate )	-	1	-
7.1 g)( MARKING OF METERS: Name Plate )	-	1	-
7.1 h)( MARKING OF METERS: Name Plate )	-	1	-
7.1 j)( MARKING OF METERS: Name Plate )	-	1	-
7.1 k)( MARKING OF METERS: Name Plate )	-	1	-
7.1 n)( MARKING OF METERS: Name Plate )	-	1	-
7.1 m)( MARKING OF METERS: Name Plate )	-	1	-
7.1.1(Bis marking)	-	1000	-
12.13(Test of starting condition)	-	1	-
12.14(Test of Meter Constant/ Registration)	-	1	-
12.11(Test of Ambient Temperature Influence)	-	1	-
12.7.2(Test of influence of supply voltage)	-	1	-
12.7.3(Test of influence of short time over currents)	-	1	-
12.7.4(Test of influence of self-heating)	-	1	-
12.7.5(Test of influence of heating)	-	1	-
12.8.5(Radio interference measurement)	-	1	-
12.8.4(Fast Transient Burst Tes)	-	1	-
12.8.3(Test for Immunity to Electromagnetic HF Fields )	-	1	-
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	-
12.6.1(dry heat test)	-	1	-
12.6.3(Damp Heat Cycle Test )	-	1	-
12.3.1(Shock Test)	-	1	-
12.3.3(Spring Hammer Test)	-	1	-
12.16(Repeatability of Error Test)	-	1	-
12.1(Test of influence quantities)	-	12238	-
6.1(General)	-	1	-
6.2(Meter case)	-	1	-
6.5(Terminal Cover(s))	-	1	-
6.6(Clearance and creepage distances)	-	1	-

Complete

31 May, 2022

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.7(Markings and instructions)	-	1748	-
1.6(Power interface .)	-	583	-
2.1(Protection from electric shock and energy hazards)	-	583	-
2.3(TNV circuits)	-	1165	-
2.4(Limited current circuits)	-	583	-
2.6(Provisions for earthing and bonding)	-	583	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	583	-
2.2(SELV circuits)	-	1165	-
2.8(Safety interlocks)	-	146	-
2.9(Electrical insulation)	-	583	-
2.10(Clearances, creepage distances and distances through insulation)	-	3495	-
3.1(General)	-	583	-
3.2(Connection to a mains supply)	-	583	-
3.3(Wiring terminals for connection of external conductors)	-	583	-
4.1(Stability)	-	583	-
4.2(Mechanical strength)	-	583	-
4.3(Design and construction)	-	583	-
4.4(Protection against hazardous moving parts)	-	583	-
4.5(Thermal requirements)	-	6990	-
4.6(Openings in enclosures)	-	583	-
4.7(Resistance to fire)	-	4660	-
5.1(Touch current and protective conductor curren)	-	583	-
5.2(Electric strength)	-	14563	-
5.3(Abnormal operating and fault conditions)	-	3495	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	583	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	583	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	583	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	4078	-
7.4(Insulation between primary circuits and cable distribution systems)	-	5825	-
Annex A3(Hot flaming oil test)	-	1	-
Annex B(Motor tests under abnormal conditions)	-	1	-
Annex C(Transformers)	-	1	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	1	-
Annex K(Thermal Control)	-	1	-
Annex EE(Household and home/ office document/ media shredders)	-	1	-

Complete

31 May, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

Yadav Measurements Pvt Ltd

Plot no. F 373-375, RIICO Bhamashah Industrial Area, Kaladwas, Udaipur (Rajasthan)-313003, Udaipur, Udaipur, Rajasthan, 313003

2942654101 [email protected]

Scope List