BIS - LIMS (Laboratory Information Management System)

CENTRAL ELECTRICAL TESTING LABORATORY

O/o THE DEPUTY DIRECTOR (E&E) CENTRAL ELECTRICAL TESTING LABORATORY DEPARTMENT OF INDUSTRIES & COMMERCE GOVERNMENT OF TAMIL NADU, CTH ROAD, KAKKALUR, Thiruvallur, Tamil Nadu, 602 003

9384572640 [email protected]

Scope List

Reset

16 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

16300 View breakup
-

Clause No.	Exclusion	Remark
6(Ratings)	-	-
7.1.1(Accessories Classification)	-	-
7.1.2(Accessories Classification)	-	-
7.1.3(Accessories Classification)	-	-
7.1.4(Accessories Classification)	-	-
7.1.5(Accessories Classification)	-	-
7.2.1(Socket-Outlets Classification)	-	-
7.2.2(Socket-Outlets Classification)	-	-
7.2.3(Socket-Outlets Classification)	-	-
7.2.4(Socket-Outlets Classification)	-	-
7.3(Plug Classification)	-	-
8.1(MARKING)	-	-
8.8(MARKING)	-	-
8.9(MARKING)	-	-
9.1(CHECKING OF DIMENSIONS)	-	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
11.1(PROVISIONS FOR EARTHING)	-	-
11.2(PROVISIONS FOR EARTHING)	-	-
11.3(PROVISIONS FOR EARTHING)	-	-
11.4(PROVISIONS FOR EARTHING)	-	-
11.5(PROVISIONS FOR EARTHING)	-	-
11.6(PROVISIONS FOR EARTHING)	-	-
12.1.1(TERMINALS)	-	-
12.1.2(TERMINALS)	-	-
12.2.1(TERMINALS)	-	-
12.2.2(TERMINALS)	-	-
12.2.3(TERMINALS)	-	-
12.2.4(TERMINALS)	-	-
12.2.5(TERMINALS)	-	-
12.2.6(TERMINALS)	-	-
12.2.7(TERMINALS)	-	-
12.2.8(TERMINALS)	-	-
12.2.9(TERMINALS)	-	-
12.2.10(TERMINALS)	-	-
12.2.11(TERMINALS)	-	-
12.3.1(TERMINALS)	-	-
12.3.2(TERMINALS)	-	-
12.3.3(TERMINALS)	-	-
12.3.4(TERMINALS)	-	-
12.3.5(TERMINALS)	-	-
12.3.6(TERMINALS)	-	-
12.3.7(TERMINALS)	-	-
12.3.8(TERMINALS)	-	-
12.3.9(TERMINALS)	-	-
12.3.10(TERMINALS)	-	-
12.3.11(TERMINALS)	-	-
12.3.12(TERMINALS)	-	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
15(INTERLOCKED SOCKET-OUTLETS)	-	-
16.1(RESISTANCE TO AGEING,)	-	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	-
16.3(Resistance to Humidity)	-	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
18(OPERATION OF EARTHING CONTACTS)	-	-
19(TEMPERATURE RISE)	-	-
20(BREAKING CAPACITY)	-	-
21(NORMAL OPERATION)	-	-
22.1(Verification of the Maximum Withdrawal Force)	-	-
22.2(Verification of Minimum Withdrawal Force)	-	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	-
24.15(MECHANICAL STRENGTH )	-	-
24.16(MECHANICAL STRENGTH )	-	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	-
25.4(RESISTANCE TO HEAT )	-	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	-
29(RESISTANCE TO RUSTING)	-	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	-
9.2(CHECKING OF DIMENSIONS)	-	-
6.1(RATINGS)	-	-
6.2(RATINGS)	-	-
8.2(Marking)	-	-
8.3(MARKING)	-	-
8.4(Marking)	-	-
8.5(Marking)	-	-
8.6(MARKING)	-	-
8.7(Marking)	-	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
11(PROVISION FOR EARTHING)	-	-
12(TERMINALS)	-	-
12.1(TERMINALS)	-	-
12.2(TERMINALS)	-	-
12.3.11 (a)(TERMINALS)	-	-
12.3.11 (b)(TERMINALS)	-	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	-
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	-
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
24.18(MECHANICAL STRENGTH)	-	-
24.19(MECHANICAL STRENGTH)	-	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	-
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	-
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	-

Complete

-
-

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

17600 View breakup
-

Clause No.	Exclusion	Remark
10.16(Creepage Distances and Clearances)	-	-
10.14(Cord Grip Test)	-	-
10.13(Mechanical Endurance Test (for Regulators Only))	-	-
10.12(Moisture Resistance Test)	-	-
10.11(Protection against Electric Shock)	-	-
10.1(Earthing Connection)	-	-
10.9(Fan Speed and Input)	-	-
10.8(Construction)	-	-
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	-
10.6(High Voltage Test)	-	-
10.5(Leakage Current)	-	-
10.4(Temperature-Rise Test)	-	-
10.3(Air Delivery Test)	-	-
9.0(Marking)	-	-
7.11(Oscillating Mechanism)	-	-
7.9(Interchangeability)	-	-
7.8(Speed Regulators)	-	-
5.0(Rated Frequency)	-	-
4.0(Rated Voltages)	-	-
3.0(Size, Speed and Types)	-	-

Complete

-
-

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

83300 View breakup
-

Clause No.	Exclusion	Remark
4.1(Lamp Dimensions )	-	-
4.3.2(Caps)	-	-
4.3.3(Caps)	-	-
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	-
7.3.1(Lamp Worm-Up Test)	-	-
7.4.1(Lamp Electrical Characteristics : Ageing)	-	-
8.4(Current Crest Factor )	-	-
10.2(Life Test)	-	-
10.1(5 000 hours operation, )	-	-
5.1(MARKING : Mark of origin)	-	-
5.1(MARKING : Rated wattage; )	-	-
5.1(MARKING : Country of manufacture; )	-	-
5.1(MARKING : Lamp designation )	-	-
5.1(MARKING : Rated voltage or voltage range. )	-	-
5.1.1(MARKING)	-	-
6(LAMP CAPS )	-	-
8.1(Open Circuit Voltage)	-	-
8.2.1(Starting Pulse Characteristics )	-	-
8.2.2(Starting Pulse Characteristics )	-	-
8.2.3(Starting Pulse Characteristics )	-	-
8.2.4.1(Starting Pulse Characteristics : General guidance)	-	-
8.2.4.2(Starting Pulse Characteristics : General guidance)	-	-
8.2.4.3(Starting Pulse Characteristics : General guidance)	-	-
8.3(Lamp Warm-Up Current )	-	-
9.1(Voltage Increase at Lamp Terminals)	-	-
9.2(Lamp Envelope Temperatures )	-	-
9.3(Permissible Cap Temperatures )	-	-
11.1( General Conditions )	-	-
11.2(Mechanical, Physical and Marking Requirements )	-	-
11.3.1( Lamp Starting, Warm-up and Electrical Characteristica )	-	-
11.4(Lumen Maintenmce)	-	-

Complete

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Size : Up to 63 mm

14100 View breakup
-

Clause No.	Exclusion	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	-
7.1.1 Table-2(Length of Socket end)	-	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	-
7.2(Minimum inside diameter of conduit)	-	-
7.3(Length of conduit)	-	-
7.4(Unifomity of The wall Thickness)	-	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	-
10(Resistance to Heat -Ball presure test)	-	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	-
6.1(Marking)	-	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	-
6.3(Standard Mark on Conduit)	-	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	-

Complete

-
-

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

16300 View breakup
Rs. 16300/-

Clause No.	Exclusion	Remark
7.1(Insulation)	-	-
7.3(Insulation)	-	-
8(Core Identification)	-	-
9(Laying up of cores)	-	-
10.1.1(Sheathing )	-	-
10.2(Sheathing )	-	-
3 & 6 (Conductor)	-	-
7.2, 10.3, 11(Dimensions & thickness )	-	-
4.2 & 12.1(Physical tests for Insulation & Sheath)	-	-
14(High Voltage Test)	-	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	-
19.2(EFFECT OF OIL ON IGNITION CABLES)	-	-
20.3(EFFECT OF LUBRICATING OIL)	-	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	-
21.2(EFFECT OF COOLING ON FLEXIBILITY)	-	-
22.1(FLAMMABILITY TEST)	-	-
23.1(Manufacturer's Identification)	-	-
24.1(PACKING AND MARKING)	-	-
24.2(PACKING AND MARKING)	-	-
24.2.1(PACKING AND MARKING)	-	-

Complete

-
-

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

15500 View breakup
-

Clause No.	Exclusion	Remark
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	-
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	-
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	-
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	-
4.1(Performance Requirments)	-	-
4.2(Performance Requirments)	-	-
4.3(Performance Requirments)	-	-
4.4(Performance Requirments)	-	-
4.5(Performance Requirments)	-	-
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	-
4.7(Electrolytic corrosion)	-	-
4.8(Stability to accelerated ageing )	-	-
4.9(Insulation resistance test)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	-
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	-
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	-
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	-
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	-
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	-
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	-

Complete

-
-

IS 11879 (1986)

Specification for electric steam cookers

- View breakup
For Ordinary type : Rs. 27600/- For immersion type : Rs. 30900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

15700 View breakup
-

Clause No.	Exclusion	Remark
3.1(MATERIALS : CONDUCTOR)	-	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	-
6.1(MATERIALS : ARMGURING)	-	-
6.2(MATERIALS : ARMGURING)	-	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	-
8.1(CONSTRUCTION : CONDUCTOR)	-	-
8.2(CONSTRUCTION : CONDUCTOR)	-	-
9.1(INSULATION )	-	-
9.2(INSULATION : Thickness of Insulation)	-	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	-
9.4(INSULATION : Application of Insulation)	-	-
10.1(CORE IDENTIFICATION)	-	-
10.2(CORE IDENTIFICATION)	-	-
10.3(CORE IDENTIFICATION)	-	-
10.3.1(Arrangement of Marking)	-	-
11.1(LAYING UP OF CORES)	-	-
11.2(LAYING UP OF CORES)	-	-
12.1(INNER SHEATH)	-	-
12.2(INNER SHEATH)	-	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	-
13.1.1(ARMOURING : Application)	-	-
13.1.2(Armouring: Coverage )	-	-
13.1.3(ARMOURING : Direction of lay )	-	-
13.1.4(ARMOURING : Application)	-	-
13.2(ARMOURING : Type of Armour)	-	-
13.3(Armouring : Dimensions -Wire Diameter)	-	-
13.4(ARMOURING : Joints)	-	-
13.5.1(ARMOURING : Resistance)	-	-
13.6 a)(ARMOURING: Tensile Strength)	-	-
13.6 b)(ARMOURING: Elongation )	-	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	-
13.6 g)(ARMOURING: Resistivity)	-	-
14.1(OUTER SHEATH)	-	-
14.2(OUTER SHEATH)	-	-
14.3(OUTER SHEATH : Colour )	-	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-
15.1 d)4)(Hot deformation : Insulation )	-	-
15.1 d)4)(Hot deformation : Sheath )	-	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	-
15.1 d)6)(Heat shock test- Insulation )	-	-
15.1 d)6)(Heat shock test- sheath )	-	-
15.1 d)7)(Thermal stability- insulation )	-	-
15.1 d)7)(Thermal stability- Sheath )	-	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	-
15.1 e)(Insulation resistance test : IR Constant )	-	-
15.1 f)(High voltage test ( water immersion test ))	-	-
15.1 g)(High voltage test at room temperature)	-	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	-
17.2(IDENTIFICATION : Cable Identification)	-	-
17.2.1(IDENTIFICATION : Cable Identification)	-	-
17.3(IDENTIFICATION : Cable Code)	-	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	-
16.4(Flammability Test)	-	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	-
16.4(Flammability Test- Un affected portion)	-	-
16.4(Flammability Test- Period of Burning)	-	-
9.3(Minimum Thickness of Reduce core insulation)	-	-
9.2(Thickness of Reduce core insulation)	-	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	-

Complete

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

19400 View breakup
-

Clause No.	Exclusion	Remark
3(CONDUCTOR: MATERIALS)	-	-
4(INSULATION : MATERIALS)	-	-
5.1(FILLER AND INNER SHEATH)	-	-
5.2(FILLER AND INNER SHEATH)	-	-
6(ARMOURING)	-	-
7(OUTER SHEATH)	-	-
8.1(CONDUCTOR: CONSTRUCTION)	-	-
8.2(PROTECTIVE BARRIER)	-	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	-
9.1(Insulation Applied by extrusicn)	-	-
9.2(Thickness of Insulation - Average)	-	-
9.3(Thickness of Insulation - Minimum)	-	-
9.4(Application of Insulation)	-	-
10.1(Core Identification)	-	-
10.2(Core Identification- Neutral)	-	-
10.3(Core Identification by number )	-	-
10.4(Core Identification by number - Neutral )	-	-
11(LAVING UP OF CORES)	-	-
12.1 & 12.2(Inner sheath : Application)	-	-
12.3(Thickness of Inner Sheath)	-	-
13.1(Armouring: Application)	-	-
13.1.2(Armouring: Coverage )	-	-
13.1.3(Armouring: Direction of Lay )	-	-
13.2(Type of armour )	-	-
13.3(Armouring : Dimensions -Wire Diameter)	-	-
13.3(Armouring : Dimensions -Formed wire )	-	-
13.4(Armour: Joint)	-	-
13.5(Armouring : Resistance Test)	-	-
13.6 a)(ARMOURING: Tensile Strength)	-	-
13.6 b)(ARMOURING: Elongation )	-	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	-
13.6 g)(ARMOURING: Resistivity)	-	-
14.1(Outer Sheath : Application)	-	-
14.2(Colour of outer sheath)	-	-
14.3(Thickness of outer sheath - AVERAGE)	-	-
14.3(Thickness of outer sheath - minimum)	-	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	-
15.1 a) iii)(Wrapping test (for aluminium))	-	-
15.1 a) iv)(Resistance test - Main conductor)	-	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	-
15.1 e) v) (Sheath : Hot deformation)	-	-
15.1 e) vi) (Sheath : Heat shock test)	-	-
15.1 e) vii) (Sheath : Thermalstability)	-	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	-
16.2(HIGH VOLTAGE TEST )	-	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	-
17.2(cable Indentification )	-	-

Complete

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.7 of IS 302-2-35:2017(Marking)	-	-
Cl.6 of IS 302-2-35:2017(Classification)	-	-
Cl.6 of IS 302-2-35:2017(Classification)	-	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	-
Cl.11 of 302-2-35:2017(Heating)	-	-
Cl.11 of 302-2-35:2017(Heating)	-	-
Cl.11 of 302-2-35:2017(Heating)	-	-
Cl.11 of 302-2-35:2017(Heating)	-	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	-
Cl.22 of IS 302-2-35-2011(Construction )	-	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	-
Cl.24 of IS 302-2-35:2017(Component )	-	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	-
Cl.10 of IS 8978 : 1992(Finish)	-	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	-
Cl.12 of IS 8978 : 1992(Endurance)	-	-

Complete

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

19800 View breakup
-

Clause No.	Exclusion	Remark
8(Marking)	-	-
8.9(Marking)	-	-
6(Rating)	-	-
7(Classification)	-	-
10(Protection against Electric Shock)	-	-
11.1(Provision for earthing)	-	-
12(Terminals)	-	-
12.2.1(Terminals)	-	-
12.2.2(Connection of conductor)	-	-
12.2.3(Mechanical strength of terminals)	-	-
12.2.4(Resistance to corrosion)	-	-
12.2.5(Undue damage to conductor)	-	-
12.2.7(Insertion of conductor)	-	-
12.2.9(Locking against accidental loosening)	-	-
12.2.11(Distance between screw and conductor)	-	-
12.3.2(Screwless terminals)	-	-
14(Mechanism [Cl. 14])	-	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	-
16.1(Insulation resistance [Cl. 16.1])	-	-
16.2( Electric Strength [Cl. 16.2])	-	-
17(Temperature- rise [Cl. 17])	-	-
18(Marking and breaking Capacity[Cl. 18])	-	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	-
19(b) Electric Strength)	-	-
19(c)Temperature-rise )	-	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	-
20(Mechanical Strength Test [Cl. 20])	-	-
21(Resistance to Heat [Cl.21])	-	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	-
12.3.4(Material of terminals)	-	-
12.3.5(Clamping)	-	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	-
13.2(i) Installation Test)	-	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	-
13.4(d) Ordinary switches [Cl 13.4])	-	-
13.5(e) Rotary switches [Cl 13.5])	-	-
13.6(f) Screws and other means [Cl 13.6])	-	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	-

Complete

-
-

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

11200 View breakup
-

Clause No.	Exclusion	Remark
9(Marking)	-	-
10.1(Dimentions)	-	-
10.2(Dimentions)	-	-
11.1(Accessibility of live parts )	-	-
11.2(Accessibility of live parts )	-	-
11.3(Accessibility of live parts )	-	-
11.4(Accessibility of live parts )	-	-
11.4.1(Accessibility of live parts )	-	-
13.1(Terminals)	-	-
12.1(Provision for Earthing)	-	-
12.2(Provision for Earthing)	-	-
13.2(Terminals)	-	-
13.3(Terminals)	-	-
13.4(Terminals)	-	-
13.5(Terminals)	-	-
13.6(Terminals)	-	-
13.7(Terminals)	-	-
13.8.1(Terminals)	-	-
13.8.2(Terminals)	-	-
13.8.3(Terminals)	-	-
14.1(Construction)	-	-
14.2(Construction)	-	-
14.3(Construction)	-	-
14.4(Construction)	-	-
15.1(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.2(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.3(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.4(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.5(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.6(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
15.7(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
16(Temperature Rise Test)	-	-
17(Temperature Rise Test)	-	-
18(Resistance to heat)	-	-
19(Resistance to abnormal heat fire and tracking)	-	-
19.2(Resistance to abnormal heat fire and tracking)	-	-
19.3(Resistance to abnormal heat fire and tracking)	-	-
20.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
20.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
20.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	-
21.1(CREEPAGE DISTANCE AND CLEARANCES)	-	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	-

Complete

-
-

IS 1475 : Part 1 (2001)

Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
6.1(COMPONENTS AND THEIR MATERIALS)	-	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	-
7.7.1(Insulation Resistance)	-	-
7.7.2(High Voltage Test)	-	-
7.7.3(Cooling capacity rating test)	-	-
7.7.4(Maximum operating conditions)	-	-
7.8.2(Performance test)	-	-

Complete

-
-

IS 2215 (2006)

Starters for fluorescent lamps (Third Revision)

20800 View breakup
-

Clause No.	Exclusion	Remark
11(Information for Ballast Design)	-	-
6(Marking)	-	-
7.3(Protection Against Accidental Electric Shocks)	-	-
7.4(Insulation Resistance under Humidity Conditions)	-	-
7.5(Dielectric Strength)	-	-
7.6(Dimensions)	-	-
7.7(Torsion Test)	-	-
7.8(Mechanical Strength)	-	-
7.9(Connections)	-	-
7.1(Resistance to Heat and Fire)	-	-
7.11(Quality of Marking)	-	-
7.12(Radio Interference Suppression Capacitors)	-	-
7.13(Heating of Starters with operating time limitation)	-	-
8(Starting Test)	-	-
9(Endurance Test)	-	-
10(Deactivated Lamp Test)	-	-

Complete

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

14500 View breakup
-

Clause No.	Exclusion	Remark
13(Cable code)	-	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	-
10.4(Flammability test- Unaffected portion)	-	-
10.4(Flammability test-Burning after flame removal)	-	-
10.2(HV (room temperature))	-	-
10.1(HV (water immersion))	-	-
10.1(HV (water immersion))	-	-
table 1 e) 3) (IR constant- max. Temp)	-	-
table 1 e) 3) (IR constant- Room temp )	-	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	-
Table 1(Category Code)	-	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	-
Table 1 iii) d) 4)(Cracks Observed)	-	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	-
Table 1 iii) c) 4)(Cracks Observed)	-	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	-
Table 1 iii) c) 3)(Elongation variation)	-	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	-
Table 1 iii) c) 3)(TS variation)	-	-
11.2(Legibility)	-	-
11.1(Durability)	-	-
11(Identification)	-	-
4.2(Conductor resistance test)	-	-
4.1(Wrapping test (for Al))	-	-
4.1(Tensile test (for Al)-Before Stranding)	-	-
4.1(Tensile test (for Al)- After Stranding)	-	-
4.1(Annealing test (for copper))	-	-
10.11(Persulphate Test )	-	-
9(Overall dimensions)	-	-
5.3(Thickness of Insulation)	-	-
8.3(Thickness of Sheath)	-	-
9.1(Ovality)	-	-
5.2(Application )	-	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	-
12(CONSTRUCTION Core Identification)	-	-
8.1(Sheath Material )	-	-
7(Binder Tape)	-	-
6.1(Filler)	-	-
6.2(Filler)	-	-
5.1(Insulation)	-	-
5.3(Minimum thickness of insulation)	-	-
5.3(Avarage thickness of insulation)	-	-
8.3(Minimum thickness of Sheath)	-	-
5.4(Mechanical properties before and after ageing)	-	-
12.0(Core identification)	-	-
8.3(Avarage thickness of Sheath)	-	-
4.1(Conductor - Material)	-	-
4.1(Conductor - Material)	-	-
4.4(Joints in Conductor)	-	-
4.4(Joints in Conductor)	-	-
4, IS 8130(Construction of conductor)	-	-
Table 2, IS 8130(No fo wire in a conductor)	-	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	-
Table 4(Copper purity test)	-	-
10.3(Spark test)	-	-
table 1, 4.2(insulation resistance test)	-	-

Complete

-
-

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

36700 View breakup
-

Clause No.	Exclusion	Remark
Clause No. 4.2 (Marking.)	-	-
Clause No. 4.3(Mechanical requirement for caps)	-	-
Clause No. 4.4(Insulation Resistance Measurement)	-	-
Clause No. 4.5(Electric strength )	-	-
Clause No. 4.6(Parts which can become accidentally live)	-	-
Clause No. 4.7(Resistance to heat & fire)	-	-
Clause No. 4.8(Creepage distance for caps)	-	-
Clause No. 4.9(Lamp cap temperature rise)	-	-
Clause No. 4.10(Lamp minimum overall length)	-	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CENTRAL ELECTRICAL TESTING LABORATORY

O/o THE DEPUTY DIRECTOR (E&E) CENTRAL ELECTRICAL TESTING LABORATORY DEPARTMENT OF INDUSTRIES & COMMERCE GOVERNMENT OF TAMIL NADU, CTH ROAD, KAKKALUR, Thiruvallur, Tamil Nadu, 602 003

9384572640 [email protected]

Scope List

No Record Found