BIS - LIMS (Laboratory Information Management System)

LUCID LABORATORIES PRIVATE LIMITED

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 [email protected]

Scope List

Reset

40 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1200	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

Complete

19 Apr, 2022

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-

Complete

19 Apr, 2022

-
-

IS 8042 (2015)

White portland cement - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	800	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1500	-

Complete

19 Apr, 2022

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
7.0(CARBON)	-	-
7.0(SULPHUR)	-	-
7.0(PHOSPHORUS)	-	-
7.0(MANGANESE)	-	-
7.0(SILICON)	-	-
7.0(NITROGEN)	-	-
7.0(ALUMINIUM)	-	-
7.0(MICRO ALLOYS)	-	-
Cl 8(UTM)	-	-
Cl 9(Workmanship)	-	-
Cl 11(Length, Width & Thickness)	-	-

Complete

19 Apr, 2022

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4 ii)(Total pesticied residue)	-	400	-
5.3 Table-2 x (Aluminium (as Al))	-	300	-
5.3 Table-2 ix (Silver (as Ag))	-	300	-
5.3 Table-2 viii (Zinc (as Zn))	-	300	-
5.3 Table-2vii (Fluoride (as F))	-	200	-
5.3 Table-2 vi (Nitrite (as NO2))	-	200	-
5.3 Table-2 v (Nitrate (as NO3))	-	500	-
5.3 Table-2 iv (Manganese (as Mn))	-	200	-
5.3 Table-2 iii (Iron (as Fe),)	-	500	-
5.3 Table-2 ii (Copper (as Cu))	-	200	-
5.3 Table-2 i (Barium (as Ba))	-	200	-
5.3 Table-1 v (Total dissolved solids)	-	200	-
5.3 Table-1 iv(Turbidity)	-	200	-
5.3 Table-1 iii (Taste)	-	200	-
5.3 Table-1 ii (Odour)	-	200	-
5.3 Table-1 i (Colour)	-	200	-
5.3 Table-2 xvii (Sodium (as Na))	-	200	-
5.3 Table-3 iii (Arsenic (as As))	-	200	-
5.3 Table-3 i (Mercury (as Hg))	-	200	-
5.3 Table-2 xii (Selenium (as Se),)	-	200	-
5.3 Table-2 xxv (Bromates (as BrO3),)	-	2500	-
5.4 i)(Aldrin)	-	200	-
5.4 i)(Isoproturon)	-	200	-
5.3 Table-3 vii (Nickel (as Ni))	-	200	-
5.3 Table-2 xx (Mineral oil)	-	200	-
5.3 Table-2 xv (Calcium (as Ca),)	-	200	-
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	200	-
5.3 Table-2 xiii (Sulphate (as SO4),)	-	200	-
5.3 Table-1vi (pH)	-	200	-
5.3 Table-2 xxii (Sulphide (as H2S))	-	300	-
5.3 Table-3 iv (Cyanide (as CN))	-	200	-
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	200	-
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	200	-
5.3 Table-3 vi(Chromium (as Cr))	-	200	-
5.3 Table-3 v (Lead (as Pb))	-	200	-
5.3 Table-3 ii (Cadmium (as Cd))	-	200	-
5.3 Table-2 xxiv (Borates (as B))	-	200	-
5.3 Table-2 xxiii (Antimony (as Sb))	-	200	-
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	200	-
5.3 Table-2 xviii (Residual free chlorine)	-	200	-
5.4 i)(Gamma-HCH (Lindane))	-	200	-
5.4 i)(Monocrotophos)	-	200	-
5.4 i)(Endosulfan Sulphate)	-	200	-
5.4 i)(Malathion)	-	200	-
5.4 i)(Methyl Parathion)	-	200	-
5.4 i)(Phorate sulphoxide)	-	200	-
5.4 i)(Chlorpyrifos)	-	200	-
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	470	-
5.2.9(Vibrio parahaemolyticus)	-	470	-
5.2.9(Vibrio cholera)	-	470	-
5.2.8(Shigella)	-	470	-
5.2.8(Salmonella)	-	470	-
5.2.7(Yeast and Mould)	-	470	-
5.2.6(Aerobic Microbial Count at 37°C)	-	465	-
5.2.6(Aerobic Microbial Count at 20-22°C)	-	465	-
5.2.5(Pseudomonas Aeruginosa)	-	470	-
5.2.4(Sulphite Reducing Anaerobes)	-	470	-
5.2.3(Staphylococcus Aureus)	-	470	-
5.2.3(Faecal Streptococci)	-	470	-
5.2.2(Coliform)	-	470	-
5.3 Table-2 xi (Chloride (as Cl))	-	500	-
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-	300	-
5.3 Table-2 xvi (Magnesium (as Mg))	-	500	-
5.4 i)(Malaoxon)	-	100	-
5.4 i)(o,p DDD)	-	100	-
5.4 i)(p,p DDD)	-	100	-
5.4 i)(o,p DDT)	-	100	-
5.4 i)(p,p DDT)	-	100	-
5.4 i)(alpha-HCH)	-	100	-
5.4 i)(beta-HCH)	-	100	-
5.4 i)(Delta-HCH)	-	100	-
5.4 i)(alpha-Endosulfan)	-	100	-
5.4 i)(beta-Endosulfan)	-	100	-
5.4 i)(Ethion)	-	100	-
5.4 i)(Phorate)	-	100	-
5.4 i)(phorate sulphone)	-	100	-
5.4 i)(2,4-D)	-	100	-
5.4 i)(Butachlor)	-	100	-
5.4 i)(Alachlor)	-	100	-
5.4 i)(Atrazine)	-	100	-
5.4 i)(Methyl Paraoxon)	-	100	-
5.4 i)(Dieldrin)	-	100	-
5.3(Description)	-	100	-
5.4 i)(o,p DDE)	-	100	-
5.4 i)(p,p DDE)	-	100	-

Complete

19 Apr, 2022

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8500 View breakup
Rs.8500/-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Die Press)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Length, Width & Thickness)	-	-

Complete

19 Apr, 2022

-
-

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl. 14.1(Exact Length)	-	250	-
Cl. 14.1(Weight on individual length)	-	250	-

Complete

19 Apr, 2022

-
-

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

HOT ROLLED STEEL FLAT PRODUCTS

7000 View breakup
-

Clause No.	Exclusion	Remark
7.1(Carbon %)	-	-
7.1(Sulphur %)	-	-
7.1(Phosphorus %)	-	-
7.1(Manganese %)	-	-
7.1(Silicon %)	-	-
7.1( Copper %)	-	-
7.1(CE)	-	-
7.1( Nitrogen%)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Sudden Load Applied)	-	-
Cl 11(Expansion Test)	-	-
Cl 13(Workmanship)	-	-
Cl 14(Weldability)	-	-
Cl 15(Length, Width & Thickness)	-	-

Complete

19 Apr, 2022

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
6.1(Boron)	-	-
6.1( Ti)	-	-
6.1(V)	-	-
Cl 8(Workmanship)	-	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	-

Complete

19 Apr, 2022

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

3500 View breakup
-

Clause No.	Exclusion	Remark
5.1(carbon)	-	-
5.1(sulphur)	-	-
5.1(phosphorus)	-	-
5.1(manganese)	-	-
5.1(aluminium)	-	-
5.1(silicon )	-	-
5.1(nitrogen)	-	-
Cl 8.1(UTM)	-	-
Cl 8.2(Press)	-	-
Cl 10(Galvanising Test)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Weight)	-	-
Cl 14(Length, Width & Thickness)	-	-

Complete

19 Apr, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

LUCID LABORATORIES PRIVATE LIMITED

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 [email protected]

Scope List