BIS - LIMS (Laboratory Information Management System)

Indian Institute of Packaging

Plot E2, MIDC Area, Andheri East, Road No.8, Post Box No. 9432, Mumbai 400093, Maharashtra, India, Andheri, Mumbai, Maharashtra, 400093

2228219803 [email protected]

Scope List

Reset

25 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2552 (1989)

Steel drums (galvanized and ungalvanized) - Specification (Third Revision)

11600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.4(Dimensions)	-	500		-
7.4(Dimensions)	-	500		-

Complete

-
-

IS 1848 : Part 2 (2018)

Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.1(Mechanical pulp for furnish)	-	500	-
4.2(Substance)	-	500	-
4.3(Thickness)	-	500	-
4.5(pH)	-	550	-
4.6 Table 1 (Double Fold CD)	-	300	-
4.6 Table 1 (Double Fold MD)	-	300	-
4.6 Table 1 (Brightness)	-	700	-
4.6 Table 1 (Opacity)	-	700	-
4.6 Table 1 (One Minute Cobb Test)	-	600	-
4.6 Table 1 (Gloss)	-	700	-
4.6 Table 1 (Smoothness)	-	550	-
4.6 Table 1 (Tear Index CD)	-	350	-
4.6 Table 1(Tear Index MD)	-	350	-
4.8.2 (pulp made from materials other than bamboo, hardwoods, softwoods and reed.)	-	0	-
4.8.2(Recycled paper and paper board must be made from waste paper.)	-	0	-

Complete

-
-

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.5(pH)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	350	-
Cl.4.2(Substance, Ref IS 1763)	-	500	-
Cl. 4.4(Size and tolerance on size)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	0	-

Complete

-
-

IS 9055 (1979)

Specification for one time carbon paper

3650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	550	-
4.2(Carbon Work)	-	550	-
4.3(Base paper)	-	550	-
4.4(Size)	-	500	-
4.5, Table-1, iii)(Manifolding (minimum no. of copies))	-	500	-
4.5, Table-1, i)(Substance of base paper, g/m2)	-	500	-
4.5, Table-1, i)(Coating, g/m2)	-	500	-

Complete

-
-

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

Corrugated Fibre Board

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 3.4, table 1, Sl no. 1(Drop test IS 7028 (Part 4):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 2(Inclined impact test IS 7028 (Part-3):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 3(Stacking test IS 7028 (Part 1):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 4(Water spary test IS 7028 (Part 8):1974)	-	900	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii)(Water Absorption Cobb/30 min )	-	600	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i)(Bursting Strength)	-	550	-

Complete

-
-

IS 1551 (1991)

Carbon papers - Typewriters - Specification (Second Revision)

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Grade 1 )	-	0	-
Cl. 4(Grade 2 )	-	0	-
Cl. 4(Grade 3 )	-	0	-
Cl. 4(Grade 4 )	-	0	-
Cl 5.1(Description)	-	0	-
Cl. 5.2(Base Paper)	-	0	-
Cl. 5.2(Base Paper)	-	0	-
Cl. 5.3(Size)	-	1000	-
Cl. 5.4(Carbon Work)	-	0	-
Cl. 5.5(Resistance of Curling, Total length of narrow side in contact with flat surface)	-	550	-
Cl. 5.6 Table 1 S.No. i)(Substance of base paper)	-	500	-
Cl. 5.6 Table 1 S.No. ii)(Coating)	-	600	-
Cl. 5.6 Table 1 S.No. ii)(Durability)	-	700	-
Cl. 5.6 Table 1 S.No. ii)(Manifold)	-	0	-
Cl 6( KEEPING QUALITY)	-	0	-
Cl. 4(GRADES)	-	0	-
Cl. 7.1(Packing)	-	0	-

Complete

-
-

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

7050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
5.1(Body and ends)	-	0	-
5.2(Closures)	-	0	-
6.1(Construction)	-	0	-
6.2(Construction)	-	0	-
6.3(Construction)	-	500	-
6.4(Construction)	-	500	-
6.5(Closure)	-	500	-
7.1(Finish)	-	550	-
7.2(Finish)	-	550	-
8(Air Pressure Test)	-	550	-

Complete

-
-

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

3950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	0	-
5.2(Base Paper)	-	0	-
5.3(Size)	-	1100	-
5.4(Carbon work)	-	0	-
5.3(Resistance to curling)	-	550	-
Table- 1(i)(Substance of the)	-	500	-
Table- 1(ii)(Coating)	-	600	-
Table- 1(iii)(Durability)	-	700	-
Table- 1(iv)(Manifolding)	-	500	-
6(Keeping quality)	-	0	-
Cl. 6(Keeping Quality)	-	0	-
Cl. 5.6 Table no 3(Durability)	-	0	-

Complete

-
-

IS 12766 (1997)

Paper, computer - Specification (First Revision)

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Paper)	-	550	-
4.1.1(Grammage ( Substance ) )	-	500	-
4.1.2(Smuge)	-	550	-
4.2(no. of papers ,Folds & interleaved carbon paper)	-	600	-
4.3(At the Z-fold, the creases shall be perforated in such a manner that the paper is joined but is capable of separation. if need be. by an easy jerk)	-	0	-
4.4(At both the sides of computer paper, on the width size, there shall be uniformly punched feed holes, free from tibres and burrs unless otherwise agreed to between the purchaser and the supplier)	-	0	-
4.4(Diameter of the feed holes)	-	500	-
4.4(Disance of the feed holes)	-	500	-
4.5(Size)	-	550	-
4.6(Colour)	-	0	-
4.6 Table 1 S.no.i)(Bulk )	-	0	-
4.6 Table 1 S.no.ii)(Moisture)	-	550	-
4.6 Table 1 S.no.iii)(Ash,)	-	600	-
4.6 Table 1 S.no.iv)(Tesile Indec CD)	-	450	-
4.6 Table 1 S.no.iv)(Tesile Indec MD)	-	450	-
4.6 Table 1 S.no.v)(Burst index)	-	700	-
4.6 Table 1 S.no. vi )(Tear Index Average of CD & MD)	-	700	-
4.6 Table 1 S.no. vii)(One minute cobb test)	-	600	-
4.6 Table 1 S.no.viii)(Opacity,)	-	700	-
4.6 Table 1 S.no.ix)(Brightness)	-	700	-
4.6 Table 1 S.no.x)(Smoothness)	-	550	-
4.7.2.1 a(pulp made from materials other than bamboo, hardwoods, softwoods and reed.)	-	0	-
4.7.2.1 b(Recycled paper and paper board must be made from waste paper.)	-	0	-
4( REQUIREMENTS )	-	0	-
4.1.1( REQUIREMENTS )	-	0	-
4.1.2( REQUIREMENTS )	-	0	-
4.2( REQUIREMENTS )	-	0	-
4.3( REQUIREMENTS )	-	0	-
4.4( REQUIREMENTS )	-	0	-
4.6( REQUIREMENTS )	-	0	-
8 of IS 1060 ( Part 1 ) 1966(Table 1)	-	0	-
9 of IS 1060 ( Part I ) 1966(Table 1)	-	0	-
11 of IS 1060 ( Part 1 ) 1966(Table 1)	-	0	-
12.4 of IS 1060 ( Part 1 ) 1966(Table 1)	-	0	-
12.5 of IS 1060 ( Part 1 ) : 1966(Table 1)	-	0	-
12.7 of IS 1060 ( Part 1 ) 1966(Table 1)	-	0	-
13.2 of IS 1060 ( Part I ) : 1966(Table 1)	-	0	-
16 of IS 1060 ( Part 1 ) : 1966(Table 1)	-	0	-
13 of IS 1060 ( Part 2 ) : 1960(Table 1)	-	0	-
4 of IS 9894 : 1981(Table 1)	-	0	-
4.7(Additional Requirements for ECO Mark )	-	0	-
4.7.1 & 4.7.2(Additional Requirements for ECO Mark )	-	0	-
5.3(Marking)	-	0	-

Complete

-
-

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions and Tolerances)	-	550	-
4.2.1.1(Dimensions and Tolerances )	-	0	-
4.1(Dimensions and Tolerances)	-	0	-
4.1(Dimensions and Tolerances)	-	0	-
4.1(Dimensions and Tolerances)	-	0	-
4.2.1(Material)	-	6600	-
4.2.1(Material)	-	0	-
4.2.2(Handle)	-	550	-
4.3.1 (Manufacture)	-	0	-
4.3.2(Manufacture)	-	0	-
4.3.3(Manufacture)	-	0	-
4.3.4(Manufacture)	-	0	-
4.3.5(Handle)	-	550	-
4.3.5(Handle)	-	0	-
4.3.5(Handle)	-	0	-
4.3.5(Handle)	-	0	-
4.3.5(Handle)	-	0	-
5.1(Air-Pressure Test)	-	550	-
5.2(Handle Pull Test)	-	600	-
5.3(Hydraulic Pressure Test)	-	900	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	0	-

Complete

-
-

IS 6956 (2001)

Cover paper - Specification (First Revision)

8150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	500	-
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	500	-
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	600	-
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	550	-
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	550	-
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	300	-
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	300	-
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	450	-
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	450	-
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	350	-
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	350	-
4.1(REQUIREMENTS-General)	-	550	-
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1100	-
4.4.1.1(Additional Requirements for ECO-Mark)	-	550	-
4.4.3(Product Specific Requirements)	-	550	-
4.4.4(Product Specific Requirements)	-	550	-

Complete

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6315 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1650	-
4.6.2(TRANSPARANCY)	-	175	-
4.6.3(LEAKAGE TEST)	-	500	-
4.6.5(MIGRATION TEST)	-	1815	-
4.6.6(PORTABILITY TEST)	-	500	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	-
4.6.5.1 (chem)(Colour migration (Caps))	-	1815	-
4.6.5.1 (chem)(Colour migration (Container))	-	0	-
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	137	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	137	-
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	175	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	375	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	250	-
4.3(Workmanship, Finish & Appearance)	-	0	-
4.2 (chem)(a) Peelability)	-	0	-
4.2 (chem)(Design, Shape & Dimension)	-	0	-
Cl. 4.4 (a) (chem)(Capacity)	-	250	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	0	-

Complete

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

7178 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.5 Annex J(Product resistance test for printed pouches)	-	125	-
7.4 Annex H(Ink adhesion test for printed pouches)	-	175	-
7.3 Annex G(Drop test )	-	500	-
7.2 Annex F(Stack Load test)	-	500	-
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	500	-
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	175	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	175	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	0	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	175	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	0	-
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1815	-
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1815	-
6.1.6(Width)	-	375	-
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	375	-
6.1.4(Odour)	-	0	-
6.1.3(Winding of the Film )	-	0	-
5(Material)	-	1650	-
Cl. 7.1(Vibration Leakage Test)	-	500	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	0	-

Complete

-
-

IS 15073 : Part 2 (2008)

Packaging of electric detonator: Part 2 corrugated fibreboard cases

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	0	-
5.1(MARKING)	-	0	-
5.2(BIS CERTIFICATION MARKING)	-	0	-
5.2.1(BIS CERTIFICATION MARKING)	-	0	-
6(TESTING OF CORRUGATED FIBREBOARD AS PER TABLE 1 AND CLAUSE 4.4)	-	0	-
6.3.1(i) SUBSTANCE, g/m2, AS PER TABLE 1)	-	900	-
6.3.1(ii) DIMENSIONAL REQUIREMENT AS PER TABLE 1 AND CLAUSE 4.4.)	-	550	-
6.3.1(iii) BURST TEST AS PER TABLE 1)	-	550	-
6.3.1(iv) WATER ABSORPTION TEST AS PER TABLE 1)	-	600	-
6.3.1(v) DROP TEST AS PER TABLE 2)	-	2000	-
6.3.1(vi) INCLINED IMPACT TEST AS PER TABLE 2)	-	2000	-
6.3.1(vii) STACKING TEST AS PER TABLE 2)	-	2000	-

Complete

-
-

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
9.1(Leakage at air pressure )	-	900	-
9.2(Drop Test)	-	2000	-
8(Finish )	-	550	-
6, b(Thickness of ends(1.25± 0.09))	-	500	-
5, Fig 2(Type 2 D(h3: 4 min))	-	500	-

Complete

-
-

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
6(Material)	-	550	-
7(Construction)	-	550	-
8(Finish )	-	550	-
9.1(Leakage at air pressure )	-	900	-
9.2(Drop Test)	-	2000	-
9.3(Hydraulic Pressure Test)	-	900	-

Complete

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

11550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	275	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	275	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	350	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	275	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	3600	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	300	-
3.3.1(Bottom seam (IS 10789))	-	350	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	275	-
5.2 and Table 1 iv(Picks per dm )	-	275	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	350	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	350	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	350	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	350	-
4.2 and Table 1 x(Ash content )	-	300	-

Complete

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

- View breakup
Rs. 26,300/-; For BIS Samples : Rs. 13,150/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

- View breakup
Rs. 29150/- for others and Rs. 14575/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

24875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	3300	-
3.2(HDPE Fabric)	-	3300	-
5.1(Lamination)	-	250	-
5.2(Panel Width)	-	250	-
5.3(Joints/Seams)	-	350	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	-
5.1.1 and 6.2(Mass, g/sq m)	-	250	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	250	-
5.1.1 and 6.2(Length)	-	250	-
5.1.1 and 6.2(Width)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	875	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	350	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	15000	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	300	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	350	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	350	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	350	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	550	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	550	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	350	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	350	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	450	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	450	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	300	-

Complete

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

- View breakup
Rs. 27,750/-; For BIS Samples : Rs. 13,875/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
REVISED VERSION OF IS 9755:2016 INCLUDED.

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

21600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	250	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	350	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	0	-
5.4(Fixing of Eyelets, IS 7903)	-	275	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	0	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	300	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	350	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	350	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	300	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	350	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	350	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	350	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	275	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	0	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	5000	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	0	-
6.2(Length, IS 7903)	-	450	-
6.2(Width, IS 7903)	-	0	-
6.2(height, IS 7903)	-	0	-
6.3(Water Proofness,IS 7941)	-	275	-
6.3(Water Proofness, IS 7940)	-	550	-
6.2(dimension(l))	-	0	-
6.2(dimension(w))	-	0	-
6.2(dimension(h))	-	0	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	250	-
3.3(Eyelets)	-	0	-
3.2(HDPE Fabric (Material Identification))	-	0	-
3.1(HDPE Tapes (Carbon Black Content))	-	1750	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	0	-
3.1(HDPE Tapes (Material Identification))	-	0	-
3.1()	-	0	-
5.1.1(Coating Thickness)	-	350	-
5.1.1(Carbon Black Content)	-	0	-
5.1.1(Sandwich lamination thickness)	-	350	-
5.1.1(Mass of Finished Tarpaulin)	-	0	-
5.1.1(UV Exposure (144 hrs))	-	4250	-
5.1.1(Agening)	-	5250	-

Complete

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

- View breakup
Rs. 20,450/-; For BIS Samples : Rs. 6,525/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
REVISED VERSION OF IS 11652:2017 INCLUDED.

IS 14490 (2018)

Plain copier paper - Specification (First Revision)

10200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	550	-
5.1(General)	-	550	-
5.2(Moisture (IS 1060 (Part 5/Sec 2)).)	-	550	-
5.3(Grammage IS 1060 (Part 5/Sec 5) & IS 1060 (Part 4/Sec 1))	-	500	-
5.4(Thickness IS 1060 (Part 5/Sec 3).)	-	500	-
5.5 Table 1 i(ISO brightness IS/ISO 2470 (Part 1))	-	700	-
5.5 Table 1 ii(Opacity IS/ISO 2471)	-	700	-
5.5 Table 1 iii(One minute cobb test, both sides IS 1060 (Part 5/Sec 4))	-	600	-
5.5 Table 1 iv(Surface strength, Dennison (Wax Pick) 8 of IS 1060 (Part 3))	-	1100	-
5.5 Table 1 v(Smoothness for both sides (Bendsten) 3 of IS 9894)	-	550	-
5.5 Table 1 vi(Ash content (at 900°C) 11 of IS 1060 (Part 1))	-	600	-
5.5 Table 1 vii a(Taber stiffness, Machine direction (MD) Appendix D of IS 4658)	-	700	-
5.5 Table 1 vii b(Taber stiffness, Cross direction (CD) Appendix D of IS 4658)	-	700	-
5.5 Table 1 viii a(Tear index Machine direction (MD) IS 1060 (Part 6/Sec 1))	-	900	-
5.5 Table 1 viii a(Tear index Cross direction (CD) IS 1060 (Part 6/Sec 1))	-	900	-
5.5 Table 1 ix a(Tensile index, Machine direction (MD) IS 1060 (Part 5/Sec 6))	-	900	-
5.5 Table 1 ix b(Tensile index,Cross direction (CD) IS 1060 (Part 5/Sec 6))	-	900	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Indian Institute of Packaging

Plot E2, MIDC Area, Andheri East, Road No.8, Post Box No. 9432, Mumbai 400093, Maharashtra, India, Andheri, Mumbai, Maharashtra, 400093

2228219803 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found