BIS - LIMS (Laboratory Information Management System)

Shriram Institute For Industrial Research

14-15, Sadarmangala Industrial Area, Whitefield Road, Bengaluru, Bengaluru Urban, Karnataka, 560048

9818193810 [email protected]

Scope List

Reset

47 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1251 (1988)

Specification for zinc phosphide, technical

All Grades

4350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2 Table 2 i (Zinc Phosphide (Zn3P2))	-	2000	-
2.2 Table 2 ii (Zinc Content)	-	1000	-
2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve)	-	500	-
2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve)	-	0	-
2.3(Freedom from sulphides)	-	750	-

Complete

-
-

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

All Grades

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	1000	-
Cl 5.1 (b)(Composition, Driers)	-	0	-
Cl 5.1.2(Volatile vehicle)	-	200	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	200	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	200	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	200	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	200	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	300	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	0	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	200	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	300	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	300	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	300	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	200	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	200	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	200	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	200	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	300	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	300	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	300	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	2000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	500	-

Complete

-
-

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

All Grades

7500 View breakup
Rs.11000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3(Freedom from Coarse Particles)	-	100		-

Complete

-
-

IS 1165 (2002)

Milk powder - Specification (First Revision)

All Grades

10430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.5(Bacterial count)	-	300	-
3.5.2(Coliform count)	-	300	-
3.5.3(Staphylococcus Aureus)	-	500	-
3.5.4(Salmonella)	-	400	-
3.5.5(Shigella)	-	400	-
3.1(Description)	-	500	-
3.2(Flavour and Taste)	-	1500	-
3.4.5(Moisture)	-	2000	-
3.4.5(Total solids)	-	1000	-
3.4.5(Fat)	-	1330	-
3.4.5(Insolubility index)	-	750	-
3.4.5(Total ash)	-	750	-
3.4.5(Titratable acidity (lactic acid))	-	700	-

Complete

-
-

IS 1061 (2017)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

All Grades

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3/3.2(Germicidal Value)	-	1750	-
4.3/3.3(Germicidal Value)	-	1750	-
4.2(Stability after Dilution)	-	500	-
4.5(Stability on Storage)	-	4000	-
4.6(Detection of Phenolic Compounds)	-	250	-
4.4(Mercury Compounds)	-	250	-

Complete

-
-

IS 517 (2020)

Specification for Methanol ( Methyl Alcohol ) ( Third Revision )

All Grades

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Relative Density)	-	1000	-
Table-1(Distillation range)	-	1000	-
Table-1(Residue on evaporation)	-	1000	-
Table-1(Alkalinity)	-	750	-
Table-1(Acidity)	-	750	-
Table-1(Aldehydes and Ketones)	-	1000	-
Table-1(Sulphur and compounds of Sulphur)	-	2000	-
Table-1(Chlorines and Chlorine compound)	-	1000	-
Table-1(Water compound)	-	1000	-
Table-1(Purity)	-	3000	-

Complete

-
-

IS 7933 (1975)

Specification for flexible polyurethane foam for domestic mattresses

All Grades

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4.1(Dimensions - Length)	-	1000	-
3.5(Indentation Hardness Characteristic)	-	1000	-
3.7(Density)	-	1000	-
3.8(Tensile Strength)	-	2000	-
3.9(Heat Ageing)	-	2500	-
3.1(Compression Set)	-	2500	-
3.11(Durability - Reduction in Thickness)	-	3000	-
3.11(Durability - Loss in 25 Percent Indentation Hardness Characteristic)	-	3000	-
3.6(Indentation Hardness Index)	-	1000	-
3.4.1(Dimensions - Width)	-	1000	-
3.4.1(Dimensions - Thickness)	-	1000	-

Complete

-
-

IS 8255 (1976)

Specification for flexible load rearing polyurethane foam components for vehicles

- View breakup
Rs.12000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 2567 (1978)

Specification for malathion emulsifiable concentrates

All Grades

450 View breakup
Rs.4500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	100	-
2.2.2(Cold Test)	-	250	-
2.2.3(Flash Point (Abel))	-	1000	-
2.2.4(Emulsion Stability)	-	250	-
2.3.1(Malathion content)	-	2150	-
2.3.2(Acidity (as H2SO4), )	-	750	-

Complete

-
-

IS 5277 (1978)

Specification for dichlorvos emulsifiable concentrates (First Revision)

All Grades

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	100	-
2.2.2(Cold test)	-	250	-
2.2.3(Flash Point)	-	1000	-
2.2.4(Emulsion Stability)	-	250	-
2.3.1(Dichlorvos Content, NV upto 9)	-	2150	-
2.3.2(Acidity)	-	750	-

Complete

-
-

IS 6438 (1980)

Specification for aluminium phosphide formulations (First Revision)

All Grades

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	250	-
2.3.1(Aluminium Phosphide Content)	-	2000	-
2.3.2(Evolution of Gas)	-	250	-

Complete

-
-

IS 9360 (1980)

Specification for carbofuran granules, bncapsulated

All Grades

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	100	-
2.2.2(Particle Size)	-	250	-
2.2.3(Dust)	-	650	-
2.2.4(Encapsulation)	-	1300	-
2.2.6(Moisture Content)	-	850	-
2.3.1(Carbofuran Content, NV upto 9)	-	2000	-
2.3.2(Acidity)	-	1250	-

Complete

-
-

IS 9665 (1981)

Specification for propoxur emulsifiable concentrates

All Grades

5350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	100	-
2.2.2(Cold Test)	-	250	-
2.2.3(Flash Point)	-	1000	-
2.2.4(Emulsion Stability)	-	250	-
2.3.1(Propoxur Content, NV upto 9)	-	2500	-
2.3.2(Acidity)	-	1250	-

Complete

-
-

IS 261 (1982)

Specification for copper sulphate (Second Revision)

All Grades

4800 View breakup
Rs.4800/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Description, Tech and Pure)	-	100	-
1(i) Table 1(Copper, Tech, A-2)	-	2000	-
1(i) Table 1(Copper, Pure, A-2)	-	0	-
1(ii) Table 1(Matter insoluble in water, Tech, A-3)	-	500	-
1(ii) Table 1(Matter insoluble in water, Pure, A-3)	-	0	-
1(iii) Table 1(Soluble iron and aluminium compounds ( as Fe ), Tech, A-4)	-	500	-
1(iii) Table 1(Soluble iron and aluminium compounds ( as Fe ), Pure, A-4)	-	0	-
1(iv) Table 1(pH value, Tech, A-5)	-	500	-
1(iv) Table 1(pH value, Pure, A-5)	-	0	-
1(v) Table 1(Chloride ( as Cl ), Tech, A-6)	-	200	-
1(v) Table 1(Chloride ( as Cl ), Pure, A-6)	-	0	-
1(vi) Table 1(Arsenic ( as As2O3 ), Tech, A-7)	-	500	-
1(vi) Table 1(Arsenic ( as As2O3 ), Pure, A-7)	-	0	-
1(vii) Table 1(Lead and zinc, Tech, A-8)	-	500	-

Complete

-
-

IS 4766 (1982)

Specification for thiram water dispersible powders (First Revision)

All Grades

4850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.3 Table 1(Thiram content, NV upto 9)	-	2500	-
2.3 Table 1(Thiram content, NV above 9 below 50)	-	0	-
2.3 Table 1(Thiram content, NV above 50)	-	0	-
2.3 Table 1(Wettability)	-	1000	-
2.3 Table 1(Sieving requirement)	-	1700	-

Complete

-
-

IS 12016 (1987)

Specification for cypermethrin EC

All Grades

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	100	-
2.2.2(Cold Test)	-	250	-
2.2.3(Flash Point (Abel))	-	1000	-
2.2.4(Emulsion Stability)	-	250	-
2.3.1(Cypermethrin content)	-	2650	-
2.3.2(Acidity)	-	1250	-

Complete

-
-

IS 2771 : Part 1 (1990)

Corrugated fibreboard boxes - Specification: Part 1 general requirements (Second Revision)

- View breakup
Rs.5000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

All Grades

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Fineness 4031 Part 2)	-	1000	-
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1000	-
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6.3 a)(Setting Time Initial- 4031 Part 5)	-	500	-
6.3 b)(Setting Time Final- 4031 Part 5)	-	500	-
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	2000	-
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	-

Complete

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

All Grades

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	750	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	750	-

Complete

-
-

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

All Grades

4126 View breakup
Rs.5600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4 Table 1(Caffeine content)	-	2126	-
3.4 Table 1(Moisture content)	-	700	-
3.4 Table 1(Total ash)	-	500	-
3.1(Description )	-	100	-
3.4 Table 1(Solubility in boiling)	-	100	-
3.4 Table 1(Solubility in cold water)	-	100	-

Complete

-
-

IS 3309 (1992)

Soluble Coffee - Chicory powder - Specification (Second Revision)

All Grades

5026 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.2.4(Monocrotophos)	-	900	-
3.4 Table 1(Moisture content)	-	700	-
3.4 Table 1(Total ash)	-	500	-
3.7(Copper content)	-	500	-
3.4 Table 1(Caffeine content)	-	2126	-
3.1(Description)	-	100	-
3.4 Table 1(Solubility in boiling)	-	100	-
3.4 Table 1(Solubility in cold water)	-	100	-

Complete

-
-

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

All Grades

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	100	-
Cl. 3.3&3.3.1 Table 1(Deltamethrin content, )	-	2000	-
Cl. 3.3 Table 1(Sieving (material passing through 45 Micron IS Sieve),)	-	500	-
Cl. 3.3 Table 1(Suspensibility, )	-	2000	-
Cl. 3.3 Table 1(Wettability )	-	250	-
Cl. 3.3 Table 1(Acidity (as H2SO4), or Alkalinity (as NaOH))	-	1250	-

Complete

-
-

IS 2557 (1994)

Annatto colour for food products - Specification (First Revision)

All Grades

5280 View breakup
Rs.5280/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1 Clause-5.1 SI.no (i) Annex-B(a) Annatto extract in oil, expresaed as bixin, percent by mass , min )	-	1000	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15(Arsenic mg/kg)	-	1000	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-15(Lead mg/kg )	-	1000	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15(Copper mg/kg)	-	1000	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-18(Heavy Metals mg/kg)	-	480	-

Complete

-
-

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

All Grades

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.5(Total dye Content)	-	1500	-
Clause 4.6 Table 1(Water InsoIuble matter,)	-	1000	-
Clause 4.6 Table 1(Lead (as pb) )	-	500	-
Clause 4.6 Table 1(Arsenic(as As))	-	500	-
Clause 4.6 Table 1(Heavy metals)	-	500	-
4.6 - Table 1 - Sl No - iv(Heavy metals - Cl 16 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - iii(Arsenic(as As) - Cl 15 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - ii(Lead (as pb) - Cl 15 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - i(Water InsoIuble matter - Cl 4 of IS 1699)	-	1000	-
4.5(Total dye Content, Annex - B)	-	1500	-

Complete

-
-

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

All Grades

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Tensile & Hardness)	-	2000	-
Cl 9(Tensile & Hardness)	-	1000	-
Cl 10(Diameter & Out Of Round)	-	1000	-

Complete

-
-

IS 9359 (1995)

Pesticide - Phorate G encapsulated - Specification

- View breakup
Rs.6000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

All Grades

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	400	-
9.1(PIPE ENDS)	-	400	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	200	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-

Complete

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

All Grades

3280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(General Requirement)	-	530	-
6.3 Table 2 i (Moisture)	-	800	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-	950	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-	1000	-

Complete

-
-

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

All Grades

8000 View breakup
Rs.8000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.2(Initial & Final)	-	1000	-
Cl 3.1(The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent))	-	3000	-
Cl 3.3(Compressive Strength, At 3days & 7 days)	-	3000	-

Complete

-
-

IS 3633 (2003)

Black tea - Specification (Second Revision)

- View breakup
Rs.4900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 16-4-2018

Bureau of Indian Standards

The National Standards Body of India

Shriram Institute For Industrial Research

14-15, Sadarmangala Industrial Area, Whitefield Road, Bengaluru, Bengaluru Urban, Karnataka, 560048

9818193810 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found