BIS - LIMS (Laboratory Information Management System)

HEXIQON LABORATORY

8487878021 [email protected]

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2556 : Part 6 (1995)

Vitreous sanitary appliances (Vitreous China): Part 6 specific requirements of urinals and partition plates

All Sizes and Grade

7000 View breakup
Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Patterns and Size)	-	500	NA
Cl 5(Dimensions & Tolerances)	-	2000	NA
Cl 6(Construction)	-	200	NA
Cl 7(Finish)	-	50	NA
Cl 8(Cleanability Test)	-	700	NA

Complete

07 Feb, 2024

-
-

IS 2556 : Part 7 (1995)

Vitreous sanitary appliances (Vitreous China) - specification: Part 7 specific requirements of accessories for sanitary appliances

All Type and Sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	100	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	50	NA
3(General requirements-Thickness IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type A )	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type B )	-	1500	NA
4(DIMENSIONS-FOOT REST )	-	1500	NA
4(DIMENSIONS-Traps for Long Pattern and Orilsa Pattern Pans )	-	1500	NA
4(DIMENSIONS-- Ovality permissible within the variation allowed for the dimensioN )	-	1500	NA
4(DIMENSIONS-- FLOOR TRAP)	-	1500	NA
4(DIMENSIONS-TYPICAL ILLUSTRATION OF VITRIOUS SHOWER ROSH)	-	1500	NA
5(CONSTRUCTION)	-	100	NA
6(FINISH)	-	100	NA
7.1(Performance Test)	-	2000	NA
7.2(FLUSHING TESTS-Toilet Paper Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Smudge Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Water Holding Capacity -Test-IS 2556(P-3))	-	600	NA
7.2(FLUSHING TESTS-Saw Dust Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Splash Test-IS 2556(P-3))	-	400	NA

Complete

07 Feb, 2024

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

100 ml to 25000 ml /PET, PP, PC, PE, PVC, PBT, PS

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	600	NA
4.6.2(TRANSPARANCY)	-	250	NA
4.6.3(LEAKAGE TEST)	-	1450	NA
4.6.4(DROP TEST)	-	300	NA
4.6.5(MIGRATION TEST)	-	1500	NA
4.6.6(PORTABILITY TEST)	-	2500	NA
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2500	NA
4.6.5.1 (chem)(Colour migration (Caps))	-	1500	NA
4.6.5.1 (chem)(Colour migration (Container))	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	1500	NA
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	300	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	1450	NA
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	250	NA
4.6.2 Annex A(Transparency)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	250	NA
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	NA
4.3(Workmanship, Finish & Appearance)	-	50	NA
4.2(Design, Shape & Dimension )	-	50	NA
4.1(Material )	-	600	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	250	NA
Cl. 4.4 (a)(Capacity)	-	250	NA
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	50	NA
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	50	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Color migration (Caps))	-	1500	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	1500	NA
Cl. 4.6.5(Cl. 4.6.5 Migration )	-	1500	NA
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	1450	NA
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	1450	NA
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	1450	NA
4.6.2.1, Annex-A(Transparency of container)	-	250	NA

Complete

07 Feb, 2024

-
-

IS 2556 : Part 3 (2004)

Vitreous Sanitary Appliances (Vitreous China) - - Part 3: Specific Requirements of Squatting Pans

Long/Orissa/Rural/ Any other Pattern declared

3750 View breakup
Rs.3750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	None
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	None
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	None
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	None
3(General requirements-Thickness IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	600	None
4(PATTERNS )	-	50	None
4(SIZE)	-	100	None
5.1(CONSTRUCTION)	-	50	None
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	200	None
6.1-Table 1(DIMENSIONS AND TOLERANCES-B)	-	200	None
6.1-Table 2(DIMENSIONS AND TOLERANCES-F)	-	200	None
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	200	None
6.1-Table 4(DIMENSIONS AND TOLERANCES-J)	-	200	None
6.1-Table 5(DIMENSIONS AND TOLERANCES-Slope of bottom of pan)	-	200	None
6.1-Table 6(DIMENSIONS AND TOLERANCES-L)	-	200	None
6.1-Table 7(DIMENSIONS AND TOLERANCES-N)	-	200	None
6.1-Table 8(DIMENSIONS AND TOLERANCES-P)	-	200	None
6.2-Table 2(DIMENSIONS AND TOLERANCES-C)	-	200	None
6.2-Table 3(DIMENSIONS AND TOLERANCES-D)	-	200	None
6.2-Table 4(DIMENSIONS AND TOLERANCES-E)	-	200	None
6.2-Table 5(DIMENSIONS AND TOLERANCES-G)	-	200	None
6.2-Table 6(DIMENSIONS AND TOLERANCES-K)	-	200	None
6.2-Table 7(DIMENSIONS AND TOLERANCES-M)	-	200	None
6.2(DIMENSIONS AND TOLERANCES-top surface variation)	-	200	None
7(FINLSH)	-	200	None
8.1(FLUSHING TESTS-Toilet Paper Test)	-	400	None
8.2(FLUSHING TESTS-Smudge Test)	-	400	None
8.3(FLUSHING TESTS-Water Holding Capacity Test)	-	600	None
8.4(FLUSHING TESTS-Saw Dust Test)	-	400	None
8.5(FLUSHING TESTS-Splash Test)	-	400	None

Complete

07 Feb, 2024

-
-

IS 4457 (2007)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

Thickness 5.0 mm to 20 mm

14000 View breakup
Rs.14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5, Table 1 - iv -a (Resistance to Chemicals - Annex F)	-	2500	NA
Cl. 5, Table 1 - iv -b (Resistance to conc. HNO3 and conc. H2SO4 - Annex G)	-	2000	NA
3(MANUFACTURE)	-	500	NA
4(MANUFACTURE)	-	500	NA
5(MANUFACTURE)	-	500	NA
4.1(DIMENSIONS AND TOLERANCES- Size)	-	1000	NA
4.2(DIMENSIONS AND TOLERANCES- Thickness)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Length)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Width)	-	1000	NA
5-Table 1(i)-b(REQUIREMENTS-Dimensions and Surface Quality-Thickness)	-	1000	NA
5-Table 1(i)-c(REQUIREMENTS-Dimensions and Surface Quality-Straightness of sided)	-	1500	NA
5-Table 1(i)-d(REQUIREMENTS-Dimensions and Surface Quality-Rectangularity)	-	1500	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Centre curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Edge curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Warpage)	-	2000	NA
5-Table 1(ii)(REQUIREMENTS-Surface Quality)	-	200	NA
5-Table 1(iii)(REQUIREMENTS-Physical Properties-Water absorption by weigh(Average))	-	1500	NA
5-Table 1(iii)-a(REQUIREMENTS-Physical Properties-Water absorption by weigh(Indivisual))	-	1500	NA
5-Table 1(iii)-b-1(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness>=7.5mm))	-	700	NA
5-Table 1(iii)b-2(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness <7.5mm))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Average))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Individual))	-	700	NA
5-Table 1(iii)-d(REQUIREMENTS-Physical Properties-Abrusion resistance)	-	2000	NA

Complete

07 Feb, 2024

-
-

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Glazed and Unglazed, Floor and Wall

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	200	NA
6 table 5, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 5,i a (width-IS 13630(pt-1))	-	1000	NA
6 table 5, i b (Thickness- IS 13630(pt-1))	-	1000	NA
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1500	NA
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	NA
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	2000	NA
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 5, ii j(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	300	NA
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	500	NA
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	500	NA
6 table 6, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 6, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 6, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	NA
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 6, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 7, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 7, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 7, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	300	NA
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 7, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 8, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 8, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 8, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	2000	NA
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1500	NA
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 9, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 9, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 9, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 9, ii q(Bulk Density-)	-	1500	NA
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	2000	NA
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	2000	NA
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 9, iii a(Resistance to staining )	-	500	NA
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1500	NA
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	2000	NA

Complete

07 Feb, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

HEXIQON LABORATORY

8487878021 [email protected]

Scope List