BIS - LIMS (Laboratory Information Management System)

RITES Eastern Region Laboratory

56, CR Avenue, Central Metro Station Building, KOLKATA, Kolkata, West Bengal, 700012

9073399490 [email protected]

Scope List

Reset

7 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.1(MANUFACTURE)	-	500	-
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	500	-
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	0	Testing charges included under Cl.4.2
4-4.5(Manufacture- Freedom from Defects )	-	300	-
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	300	-
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	-
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	0	Testing charges Rs.500 for both Ends and Picks
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	1000	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	0	Testing charges Rs.1000/- for both Wrap and Weft
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	1000	-
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	750	-
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	918	-
5-5.2-Table 2-Sr. No.i)(SPECIFIC REQUIREMENTS-Cl. 8.9 of IS 9113 Total number of bags per bale (see Note 1) 500 )	-	0	-
5-5.2-Table 2-Sr. No.ii)(SPECIFIC REQUIREMENTS- Total number of bags per bale (see Note 1) 25)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iii)(SPECIFIC REQUIREMENTS- Contract mass of a bale, kg (see Note 2) 332.5)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iv)(SPECIFIC REQUIREMENTS- Cl. 8.1 of IS 9113 Corrected net mass of a bale, kg)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.v)(SPECIFIC REQUIREMENTS- Visual Number of joined bags per bundle of 25 bags )	-	0	-
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	0	Testing charges covered under 5.5.1
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	-
4-4.4(Manufacture-Hemming at the Mouth )	-	100	-

Complete

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	100	-
Cl 7.2(Weight)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 6.1(Length, Width & Thickness)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 5(Deformations and Surface Characteristics)	-	0	Pull test test Facility not available.
Cl. 8.1 Table 3(Elongation, percentage)	-	1500	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(TS/YS ratio)	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Tensile Strength (TS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 7.2 Table -2 (Nominal Mass)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, projected area
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, mean area
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl 9.3(Load In One Direction)	-	1000	-
Cl 8.1(UTM)	-	1500	-
Cl 9.4(Load In Other Direction From Bend)	-	1000	-

Complete

-
-

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Fabric)	-	500	-
4.2 IS 9113(Seam )	-	500	-
4.3 IS 9113(Hemming at the Mouth )	-	500	-
4.4 Annex B(Freedom from Defects)	-	300	-
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	300	-
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	300	-
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	500	-
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	500	-
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	500	-
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	-
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	-
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	-
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	-
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	425	-
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	425	-
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	918	-
5.3 Table 2 ii) ( Number of joined bags per)	-	300	-
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	300	-
6 IS 2873(PACKING)	-	0	-
4.1.1(Fabric)	-	500	-
4.5 IS 10146(Liner)	-	0	-
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	500	-
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	500	-

Complete

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.2(Workmanship)	-	100	-
Cl 10.2(Press)	-	1000	-
Cl 10.3(Workmanship)	-	100	-
Cl 11(Length, Width & Thickness)	-	100	-
Cl 9(Workmanship)	-	100	-
6.1(Carbon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Cr)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Copper %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Manganese %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Mo)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Ni)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Phosphorus %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Silicon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Sulphur %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(V)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
10.1 (a)(Macro-examination)	-	1500	-
10.1 (b)(Sulphur print)	-	1500	Testing charges Rs.1500/- for Both Micro and Sulphur print Examination

Complete

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
9( FREEDOM FROM DEFECTS)	-	100	Chemical analysis charges is applicable for testing all elements as per the IS 2831
10.1.a)( Macro examination IS 11371)	-	750	-
10.1.b)( Sulphur print tests IS 12037)	-	750	-
11 & 12(DIMENSIONS and Tolerances)	-	100	-

Complete

-
-

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

6268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	500	-
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	500	-
4.2(Seam-IS 9113 (Cl.5.1.2))	-	500	-
4.2.i)( Type of stitches Herakle )	-	500	-
4.2.iii)( Stitches/dm 10 ± 1 )	-	500	-
4.3.ii)(Tex of jute twine )	-	500	-
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	500	-
4.3.i)( Stitches/dm 10 ± 1 )	-	500	-
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	500	-
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	500	-
4.5(Freedom from defects)	-	300	-
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	300	-
4.1 & 5.1, Table 1(Outside Length, cm )	-	300	-
4.1 & 5.1, Table 1(Outside Width, cm )	-	300	-
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	500	-
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	500	-
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	500	-
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	1000	-
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	500	-
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	500	-
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	1000	-
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	750	-
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	918	-

Complete

-
-

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

5618 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl4.2( IS 9113 )(HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-	500	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	500	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113(For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-	500	-
Cl.4.4 (IS 19113)( Joined Bag The joining shall be done in such a manner that warp and weft shall run in the same direction.)	-	300	-
Cl.4.5( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-	300	-
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	300	-
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	500	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	500	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	500	-
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	1000	-
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	1000	-
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. i) Total number of bags per bale)	-	0	-
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. ii) Number of joined bags per bundle of 25 bags)	-	0	-
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. iv) Contract mass of a bale, kg)	-	500	-
Cl.5.2 & Table 2. Cl 8.1 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Correct net mass of a bale)	-	500	-
Cl.5.2 & Table 2. Cl 8.2 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Moisture regain percent, Max)	-	500	-
Cl.5.2 & Table 2. IS 2969( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-	918	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

RITES Eastern Region Laboratory

56, CR Avenue, Central Metro Station Building, KOLKATA, Kolkata, West Bengal, 700012

9073399490 [email protected]

Scope List