BIS - LIMS (Laboratory Information Management System)

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD

RH- 8 ,County Walk , Near Shishukunj School , Village jhalara, INDORE, Indore, Madhya Pradesh, 452016

8586931454 [email protected]

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated ( Heavy Duty) Electric Cables

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(INSULATION : Thickness of Insulation)	-	75	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.5.1(ARMOURING : Resistance)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.1.2(Armouring: Coverage )	-	75	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	78	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	78	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	75	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	81	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	81	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	81	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	81	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	81	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2670	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2670	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2670	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 d)4)(Hot deformation : Insulation )	-	90	-
15.1 d)4)(Hot deformation : Sheath )	-	90	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2670	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2670	-
15.1 d)6)(Heat shock test- Insulation )	-	90	-
15.1 d)6)(Heat shock test- sheath )	-	90	-
15.1 d)7)(Thermal stability- insulation )	-	81	-
15.1 d)7)(Thermal stability- Sheath )	-	81	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	156	-
15.1 e)(Insulation resistance test : IR Constant )	-	156	-
15.1 f)(High voltage test ( water immersion test ))	-	870	-
15.1 g)(High voltage test at room temperature)	-	870	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	177	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	177	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	177	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	177	-
16.4(Flammability Test)	-	75	-
16.5(Oxygen Index Test)	-	582	-
16.6(Flame Retardance Test on Single Cables)	-	75	-
16.7(Flame Retardance Test on Bunched Cables)	-	131	-
16.1(Temperature Index)	-	480	-
16.9(Test for Halogen Acid Gas Evolution)	-	183	-

Complete

03 Jan, 2024

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC INSULATED UNSHEATHED AND SHEATHED CABLE

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	4223	-
10.4(Flammability test- Unaffected portion)	-	125	-
10.4(Flammability test-Burning after flame removal)	-	125	-
table 1 e) 3) (IR constant- max. Temp)	-	176	-
table 1 e) 3) (IR constant- Room temp )	-	176	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	176	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	176	-
10.2(HV (room temperature))	-	870	-
10.1(HV (water immersion))	-	870	-
10.8(Smoke density rating)	-	131	-
10.6(Halogen evolution)	-	181	-
10.7(Temperature index)	-	630	-
10.5(Oxygen index)	-	585	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	102	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	102	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	102	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	102	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	81	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	81	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	90	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	90	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	90	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	90	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	90	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	90	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2670	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2670	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2670	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2670	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	81	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	81	-
8.3(Thickness of Sheath)	-	75	-
5.3(Thickness of Insulation)	-	75	-
10.11(Per sulphate test (for tinned Cu cable only))	-	125	-
4.2(Conductor resistance test)	-	81	-
4.1(Wrapping test (for Al))	-	75	-
4.1(Tensile test (for Al)- After Stranding)	-	81	-
4.1(Tensile test (for Al)-Before Stranding)	-	81	-
4.1(Annealing test (for copper))	-	81	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	75	-
Table 4(Copper purity test)	-	900	-

Complete

03 Jan, 2024

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

PLAIN CONDUITS OF INSULATING METERIALS

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	75	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	75	-
7.4(Unifomity of The wall Thickness)	-	75	-
7.2(Minimum inside diameter of conduit)	-	75	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	75	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	78	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	78	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	75	-
10(Resistance to Heat -Ball presure test)	-	75	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	75	-
9.3(Compression Test at Full force applied (On load))	-	78	-

Complete

03 Jan, 2024

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE Insulated, PVC Sheathed Armored cable

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Thickness of Insulation - Average)	-	75	-
9.3(Thickness of Insulation - Minimum)	-	75	-
13.1.2(Armouring: Coverage )	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-
13.5(Armouring : Resistance Test)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	78	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	128	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	125	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	78	-
14.3(Thickness of outer sheath - AVERAGE)	-	75	-
14.3(Thickness of outer sheath - minimum)	-	75	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) iii)(Wrapping test (for aluminium))	-	75	-
15.1 a) iv)(Resistance test - Main conductor)	-	81	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	81	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2670	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	90	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	90	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2670	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	870	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	81	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2670	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 e) v) (Sheath : Hot deformation)	-	2670	-
15.1 e) vi) (Sheath : Heat shock test)	-	81	-
15.1 e) vii) (Sheath : Thermalstability)	-	156	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1017	-
16.2(HIGH VOLTAGE TEST )	-	75	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	582	-
16.9(Oxygen Index Test)	-	75	-
16.14(Temperature Index)	-	78	-
16.1(Flame Retardance Test on Single Cables)	-	131	-
16.11(Flame Retardance Test on Bunched Cables)	-	183	-
16.13(Test for Halogen Acid Gas Evolution)	-	480	-

Complete

03 Jan, 2024

-
-

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminum Alloy Stranded conductor

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	300	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor )	-	300	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	300	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	300	-
12.3 Table 1(Elongation Test- Before Stranding)	-	300	-
12.3 Table 1(Elongation Test- After Stranding)	-	300	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 18 wire layer)	-	300	-
9.2(Lay Ratio 24 wire layer)	-	300	-

Complete

03 Jan, 2024

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

AERTAL BUNCHED CABLES

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2( Thickness of insulation)	-	75	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	78	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	75	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	78	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	78	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	78	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2670	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2670	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	2670	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	2670	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	165	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	5475	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	153	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	153	-
10.1 g)(High voltage test - IS10810:Part 45)	-	153	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	75	-

Complete

03 Jan, 2024

-
-

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for overhead Transmission purpose

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	300	-
12.3, Table-1(Breaking load before stranding)	-	300	-
12.3, Table-1(Breaking load after stranding)	-	300	-
12.4(Wrapping test)	-	300	-
12.5, Table 1(Resistance test)	-	300	-

Complete

03 Jan, 2024

-
-

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductor Galvanized steel reinforced

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	303	-
13.7.2 (chem)(Mass of Zinc coating)	-	304	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	304	-
13.10 (elec)(Ultimate breaking load)	-	304	-

Complete

03 Jan, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD

RH- 8 ,County Walk , Near Shishukunj School , Village jhalara, INDORE, Indore, Madhya Pradesh, 452016

8586931454 [email protected]

Scope List