BIS - LIMS (Laboratory Information Management System)

TCR ENGINEERING SERVICES PVT.LTD.

VKB HOOUSE PLOT NO. EL 182 MIDC TTC ELECTRONIC ZONE MAHAPE NAVI MUMBAI, NAVI MUMBAI, Thane, Maharashtra, 400710

9323398284 [email protected]

Scope List

Reset

20 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	250	-
6.0(SULPHUR)	-	250	-
6.0(PHOSPHORUS)	-	250	-
6.0(MANGANESE)	-	250	-
6.0(SILICON)	-	250	-
6.0(ALUMINIUM)	-	250	-
6.0(NITROGEN)	-	250	-
Cl 7(UTM)	-	650	-
Cl 8.5(Workmanship)	-	500	-
Cl 9(Workmanship)	-	250	-
Cl 10(Length, Width & Thickness)	-	250	-

Complete

-
-

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	0		-

Complete

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

As per table 2 ,3 & 4

6150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	350	-
Cl 8.1(UTM)	-	650	-
Cl 6.1(Length, Width & Thickness)	-	250	-
Cl 7.2(Weight)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	250	-

Complete

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

As per table 1& 4

14350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	350	-
Cl 15(Length, Width & Thickness)	-	350	-
Cl 13(Y Groove Cracking Test)	-	7500	-
Cl 12(Sudden Load Applied)	-	1500	-
Cl 11.3(Press)	-	350	-
Cl 10.3(UTM)	-	650	-
Cl 7(Workmanship)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-

Complete

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(CARBON)	-	250	-
7.0(SULPHUR)	-	250	-
7.0(PHOSPHORUS)	-	250	-
7.0(MANGANESE)	-	250	-
7.0(SILICON)	-	250	-
7.0(ALUMINIUM)	-	250	-
Cl 8(UTM)	-	650	-
Cl 9(Workmanship)	-	500	-
Cl 10(Workmanship)	-	250	-
Cl 11(Length, Width & Thickness)	-	250	-
8(Mechanical and Physical Properties)	-	17600	-

Complete

-
-

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

As per Table 1 to 7

6150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	250	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	250	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	250	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	250	-
9.3(Guided bend test(For SAW Pipes))	-	1000	-
9.1(Tensile test-Yield Strength)	-	650	-
9.1(Tensile test-Strength)	-	650	-
9.1(Tensile test- Elongation)	-	650	-
9.2.3(Flattening Test for seamless pipes)	-	250	-
9.3(Guided Bend Test (for SAW Pipes))	-	1000	-
11.1, Table 5.(Mass)	-	250	-
11.1, Table 5.(Outside Diameter (OD))	-	250	-

Complete

-
-

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

25100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Diameter of Core Wire)	-	500	-
7.1.2(Length of Electrodes)	-	500	-
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	250	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	700	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-	700	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	700	-
9.1.3 Table 6 ( Impact Strength-Annex F)	-	900	-
9.2(Butt Weld Bend Test-IS 1599)	-	1000	-
9.3(Running PerformanceTest-Annex H)	-	200	-
9.4(Increased Metal Recovery Test-IS 13043)	-	300	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	5000	-
9.6(Radiographic Test- IS 1182)	-	750	-

Complete

-
-

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	0		-

Complete

-
-

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3(UTM)	-	0		-

Complete

-
-

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13(Mechanical Testing)	-	0		-

Complete

-
-

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7(UTM)	-	0		-

Complete

-
-

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12(UTM)	-	0		-

Complete

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

As per Table 1 to 7

5800 View breakup
Rs. 5800/- (10 % Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	650	-
Cl 9(Press)	-	350	-
Cl 10(Die Press)	-	300	-
Cl 13(Length, Width & Thickness)	-	250	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Silicon %)	-	250	-
6.1( Copper %)	-	250	-
6.1( Aluminium %)	-	250	-
6.1( Nb)	-	250	-
6.1(V)	-	250	-
6.1( Ti)	-	250	-
6.1(Cr)	-	250	-
6.1(Mo)	-	250	-
6.1(Ni)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1(Microalloying)	-	250	-

Complete

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8(Workmanship)	-	0		-

Complete

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1(Workmanship)	-	0		-

Complete

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1(Workmanship)	-	0		-

Complete

-
-

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9(Workmanship)	-	0		-

Complete

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

As per Table 1 & 2

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	650	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	650	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	650	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	650	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	650	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	350	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	650	-

Complete

-
-

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

As per Table 1

5250 View breakup
Rs. 5250/- (10 % Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & 9(Diameter)	-	250	NA
6(Carbon %)	-	250	NA
6(Manganese %)	-	250	NA
6(Phosphorus %)	-	250	NA
6(Sulphur %)	-	250	NA
6(Silicon %)	-	250	NA
6( Copper %)	-	250	NA
6( Aluminium %)	-	250	NA
6( Nb)	-	250	NA
6(V)	-	250	NA
6( Ti)	-	250	NA
6(Cr)	-	250	NA
6(Mo)	-	250	NA
6(Ni)	-	250	NA
6(Cr+ Mo+ Ni)	-	250	NA
Cl 7(Workmanship)	-	250	NA

Complete

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

As per Table 1 to 6

5050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	250	-
5.1(sulphur)	-	250	-
5.1(phosphorus)	-	250	-
5.1(manganese)	-	250	-
5.1(silicon )	-	250	-
5.1(aluminium)	-	250	-
5.1(Titanium)	-	250	-
5.1(copper)	-	250	-
5.1(nitrogen)	-	250	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1200	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1200	-
Cl 8.1(UTM)	-	650	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	650	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	650	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	650	-
Cl.12(Freedom from defects)	-	250	-
Cl 13(Weight)	-	250	-
Cl 14(Length, Width & Thickness)	-	250	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	250	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	250	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

TCR ENGINEERING SERVICES PVT.LTD.

VKB HOOUSE PLOT NO. EL 182 MIDC TTC ELECTRONIC ZONE MAHAPE NAVI MUMBAI, NAVI MUMBAI, Thane, Maharashtra, 400710

9323398284 [email protected]

Scope List