BIS - LIMS (Laboratory Information Management System)

MSME TESTING CENTRE CHENNAI

9445662299 [email protected]

Scope List

Reset

27 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

All Grade

10920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	3600	Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish Except Eddy Current
7.1, 7.2(Vanadium)	-	500	-
7.1, 7.2(Chromium)	-	500	-
7.1, 7.2(copper)	-	500	-
7.1, 7.2(phosphorus)	-	500	-
7.1, 7.2(sulphur)	-	500	-
7.1, 7.2(manganese)	-	500	-
7.1, 7.2(silicon )	-	500	-
7.1, 7.2(carbon)	-	500	-
Cl 8(Workmanship)	-	0	-

Complete

31 Dec, 2023

-
-

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

All

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.3(Compatibility with Thinner, IS 1872)	-	300	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.1.2(Volatile vehicle)	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.4(Freedom from Objectionable Impurities)	-	300	Sample Size: 500ml along with suitable thinner 500ml in tin container
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (i) (a) Table 1(Consistency, Annex C)	-	300	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	300	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	250	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	800	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	800	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	250	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	500	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	250	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	500	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	500	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	1000	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	9900	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	9900	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	9900	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	2000	Sample Size: 500ml along with suitable thinner 500ml in tin container
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	5000	Sample Size: 2X 500ml along with suitable thinner 500ml in tin container

Complete

31 Dec, 2023

-
-

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

All Type

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.3, 8.1 - Table 1 -xiii)(Keeping Properties)	-	5000	Test certificate will be issued after stipulated time (13 months from the date of manufacturing) Sample size: 500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -xii)(Mass)	-	250	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -xi)(Flash Point)	-	500	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -x) b)(Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-	9900	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -x) a)(Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-	9900	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -ix) b)(Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-	500	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -viii)(Red Oxide (as Fe2O3) )	-	1000	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -vii)(Zinc Phosphate)	-	1000	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -vi)(Pigment Content)	-	1000	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -v)(Wet Opacity)	-	250	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -iv)(Colour in Natural Daylight)	-	250	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -iii)(Finish)	-	250	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -ii)(Consistency )	-	250	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -i)(Drying time hard dry)	-	600	500ml along with suitable thinner 500ml in tin container
Cl.5.2(Lead Restriction)	-	1000	500ml along with suitable thinner 500ml in tin container
Cl.5.3, 8.1 - Table 1 -ix) a)(Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-	500	500ml along with suitable thinner 500ml in tin container

Complete

31 Dec, 2023

-
-

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

All type

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.4(Skin Formation)	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.5(Thinning Properties)	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.6(Application Properties)	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.8(Lead Restriction)	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	250	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	250	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (4) a) Finish (Under coating ) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (4) a) Finish (Finishing) )	-	600	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	300	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (6) Colour , (Finishing))	-	150	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	500	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	1000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	2000	sample size 500ml along with suitable thinner 500ml in tin container
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	5000	sample size 500ml X 2, along with suitable thinner 500ml in tin container
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	sample size 500ml along with suitable thinner 500ml in tin container

Complete

31 Dec, 2023

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

All Grade

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All type

17400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	1000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	0	-
4.1(Sulphur and phosphorous)	-	0	-
4.1(CE)	-	0	-
Cl 7.2(Weight)	-	600	-
Cl 6.1(Length, Width & Thickness)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	8400	-
4.1(Ni)	-	500	-
4.1(Mo)	-	500	-
4.1(Cr)	-	500	-
4.1( Ti)	-	500	-
4.1(V)	-	500	-
4.1( Nb)	-	500	-
4.1( Aluminium %)	-	500	-
4.1( Copper %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Carbon %)	-	500	-
Cl 9.3(Load In One Direction)	-	600	-
Cl 8.1(UTM)	-	1200	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1200	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	0	-
Cl. 8.1 Table 3(TS/YS ratio)	-	0	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1200	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	600	-

Complete

31 Dec, 2023

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

- View breakup
Type Test: Rs.10000/- (1 core), Rs.11000/- (2 core), Rs.13000/- (3 core), Rs.15000/- (3 1/2, 4 core) Optional Tests Cold Bend test – Rs 1500 /- Cold Impact – Rs 1500 /-Additional Ageing Test – Rs 1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
. Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All type Solid samples

5460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	120	Sample size 1metre
Cl 15(Length, Width & Thickness)	-	180	Sample size 1metre
Cl 11.3(Press)	-	600	Sample size 0.5metre
Cl 10.3(UTM)	-	600	Sample size 0.5metre
Cl 12(Sudden Load Applied)	-	360	Sample size 100mm
Cl 7(Workmanship)	-	0	Sample size 1metre
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min)
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	400	SSample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min)
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	500	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	500	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	500	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	0	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	400	Sample size 20X75xx0.5mm (Min) by OES
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	400	Sample size 20X75xx0.5mm (Min) by OES

Complete

31 Dec, 2023

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

Minimum 30 L for complete test

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-	250	nil
5.4 ii)(Total pesticied residue)	-	3000	nil
5.4 i)(Dieldrin)	-	100	nil
5.4 i)(Aldrin)	-	100	nil
5.4 i)(Malaoxon)	-	100	nil
5.4 i)(Malathion)	-	100	nil
5.4 i)(Methyl Paraoxon)	-	100	nil
5.4 i)(Methyl Parathion)	-	100	nil
5.4 i)(Atrazine)	-	100	nil
5.4 i)(Alachlor)	-	100	nil
5.4 i)(Isoproturon)	-	100	nil
5.4 i)(Butachlor)	-	100	nil
5.4 i)(2,4-D)	-	100	nil
5.4 i)(phorate sulphone)	-	100	nil
5.4 i)(Phorate sulphoxide)	-	100	nil
5.4 i)(Phorate)	-	100	nil
5.4 i)(Chlorpyrifos)	-	100	nil
5.4 i)(Ethion)	-	100	nil
5.4 i)(Monocrotophos)	-	100	nil
5.4 i)(Endosulfan Sulphate)	-	100	nil
5.4 i)(beta-Endosulfan)	-	100	nil
5.4 i)(alpha-Endosulfan)	-	100	nil
5.4 i)(Delta-HCH)	-	100	nil
5.4 i)(beta-HCH)	-	100	nil
5.4 i)(Gamma-HCH (Lindane))	-	100	nil
5.4 i)(p,p DDD)	-	100	nil
5.4 i)(o,p DDD)	-	100	nil
5.4 i)(p,p DDE)	-	100	nil
5.4 i)(o,p DDE)	-	100	nil
5.4 i)(p,p DDT)	-	100	nil
5.4 i)(o,p DDT)	-	100	nil
5.4 i)(alpha-HCH)	-	100	nil
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	650	nil
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	650	nil
5.3 Table-3 vii (Nickel (as Ni))	-	250	nil
5.3 Table-3 vi(Chromium (as Cr))	-	250	nil
5.3 Table-3 v (Lead (as Pb))	-	250	nil
5.3 Table-3 iv (Cyanide (as CN))	-	500	nil
5.3 Table-3 iii (Arsenic (as As))	-	250	nil
5.3 Table-3 ii (Cadmium (as Cd))	-	250	nil
5.3 Table-3 i (Mercury (as Hg))	-	250	nil
5.3 Table-2 xxv (Bromates (as BrO3),)	-	250	nil
5.3 Table-2 xxiv (Borates (as B))	-	250	nil
5.3 Table-2 xxiii (Antimony (as Sb))	-	250	nil
5.3 Table-2 xxii (Sulphide (as H2S))	-	250	nil
5.3 Table-2 xx (Mineral oil)	-	500	nil
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	250	nil
5.3 Table-2 xviii (Residual free chlorine)	-	250	nil
5.3 Table-2 xvii (Sodium (as Na))	-	250	nil
5.3 Table-2 xvi (Magnesium (as Mg))	-	250	nil
5.3 Table-2 xv (Calcium (as Ca),)	-	250	nil
5.3 Table-2 xiii (Sulphate (as SO4),)	-	250	nil
5.3 Table-2 xii (Selenium (as Se),)	-	250	nil
5.3 Table-2 xi (Chloride (as Cl))	-	250	nil
5.3 Table-2 x (Aluminium (as Al))	-	250	nil
5.3 Table-2 ix (Silver (as Ag))	-	250	nil
5.3 Table-2 viii (Zinc (as Zn))	-	250	nil
5.3 Table-2vii (Fluoride (as F))	-	250	nil
5.3 Table-2 vi (Nitrite (as NO2))	-	250	nil
5.3 Table-2 v (Nitrate (as NO3))	-	250	nil
5.3 Table-2 iv (Manganese (as Mn))	-	250	nil
5.3 Table-2 iii (Iron (as Fe),)	-	250	nil
5.3 Table-2 ii (Copper (as Cu))	-	250	nil
5.3 Table-2 i (Barium (as Ba))	-	250	nil
5.3 Table-1vi (pH)	-	100	nil
5.3 Table-1 v (Total dissolved solids)	-	250	nil
5.3 Table-1 iv(Turbidity)	-	100	nil
5.3 Table-1 iii (Taste)	-	50	nil
5.3 Table-1 ii (Odour)	-	50	nil
5.3 Table-1 i (Colour)	-	100	nil
5.3(Description)	-	50	nil
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	300	nil
5.2.2(Coliform)	-	300	nil
5.2.3(Faecal Streptococci)	-	400	nil
5.2.3(Staphylococcus Aureus)	-	400	nil
5.2.4(Sulphite Reducing Anaerobes)	-	400	nil
5.3 Table-4 ii (Beta emitters)	-	2800	nil
5.2.5(Pseudomonas Aeruginosa)	-	400	nil
5.2.6(Aerobic Microbial Count at 20-22°C)	-	200	nil
5.2.6(Aerobic Microbial Count at 37°C)	-	100	nil
5.2.7(Yeast and Mould)	-	600	nil
5.2.8(Salmonella)	-	600	nil
5.2.8(Shigella)	-	600	nil
5.2.9(Vibrio cholera)	-	600	nil
5.2.9(Vibrio parahaemolyticus)	-	600	nil
5.3 Table-4 i (Alpha emitters)	-	2800	nil
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	250	nil

Complete

31 Dec, 2023

-
-

IS 2141 (2000)

Hot dip galvanized stay strand - Specification (Fourth Revision)

all grades

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(S)	-	750	Sample Size: 50 g chips sample
4(P)	-	750	Sample Size: 50 g chips sample
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core)	-	850	sample size : 2 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core)	-	1250	sample size : 3 metre
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core)	-	850	sampe size 3 metre
5(b) Tensile Grade)	-	0	-
6(a) Lay)	-	500	-
6(b) Construction)	-	500	-
7(Freedom from defects)	-	0	-
9(a) Tensile)	-	500	-
9(b) Elongation)	-	850	-
9(a) Tensile)	-	500	-

Complete

31 Dec, 2023

-
-

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

Grade SL,SM, SH, DM, DH

10920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	4200	-
7.1, 7.2(copper)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(Vanadium)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(phosphorus)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(sulphur)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(manganese)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(silicon )	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(carbon)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(Chromium)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(nitrogen)	-	500	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(cu + cr + ni)	-	0	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(sulphur + phosphorus)	-	0	Sample size 8 mm dia above using Optical Emission Spectrometer
7.1, 7.2(cu + cr+ni)	-	0	Sample size 8 mm dia above using Optical Emission Spectrometer
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	600	Sample size 8 mm dia above using Optical Emission Spectrometer

Complete

31 Dec, 2023

-
-

IS 2581 (2002)

Round strand galvanized steel wire ropes for shipping purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

All type

- View breakup
Physical, Chemical, pesticide residues requirements-Rs.13500/-, Microbiological-Rs.5500/-, Radioactive residues-Rs.5600/-, All parameters-Rs.24600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

8280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Tensile Test On UTM)	-	720	-
9.2(Wrapping Test)	-	720	-
9.3(Bend test)	-	720	-
6 AND AS PER IS 7887(CARBON)	-	500	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(SILICON)	-	500	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(MANGANESE)	-	500	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(SULPHUR)	-	500	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(ALUMINIUM)	-	1000	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811
6 AND AS PER IS 7887(MICRO ALLOY)	-	1000	100 grams chips/drillings upto 8mm dia by IS 228 and 8mm dia above 50mm lenghtX3 specimen by IS 8811

Complete

31 Dec, 2023

-
-

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

All Type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

All grade

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 2339 (2013)

Aluminium paints for general purposes - Specification (First Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Composition)	-	1000	Suitable thinner can be supplied
5.2(Lead Restriction)	-	1100	-
5.3/8.1 (i)(Drying time)	-	200	-
5.3/8.1 (iv)(Mass)	-	800	-
5.3/8.1 (v)(Wet opacity)	-	800	-
5.3/8.1 (vi)(Flexibility and adhesion, bend test)	-	800	-
5.3/8.1 (vii)(Resistance to humidity under condition of condensation)	-	6000	-
5.3/8.1 (viii)(Flash point)	-	1000	-
5.3/8.1 (ix)(Keeping properties)	-	4000	-

Complete

31 Dec, 2023

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
Rs.4920/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
Rs.3600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
Type test: Rs.12500/- for two core, Rs.13000/- for three core, Rs.15000/- for 3.5 & 4 core Optional Test Cold bend test – Rs 1500 /- Cold impact test – Rs 1500 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 2004 (1991)

Carbon steel forgings for general engineering purposes - Specification (Third Revision)

- View breakup
Rs.4620/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	630	for 7 stands
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1080	for 7 stands
12.2 Table 1(Breaking Load Test- After Stranding)	-	1080	for 7 stands
12.3 Table 1(Elongation Test- After Stranding)	-	450	for 7 stands
12.3 Table 1(Elongation Test- Before Stranding)	-	450	for 7 stands
12.4 Table 1(Resistance of Aluminium wire)	-	630	for 7 stands
9.2 Table 3(Lay Ratio of stranded conductors)	-	360	for 7 stands

Complete

31 Dec, 2023

-
-

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

- View breakup
Rs.9720/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

All Size

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
Rs.8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

- View breakup
Rs.4000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Testing charges has been fixed for a period of two years w.e.f. 14-12-2018 i.e. up to 13-12-2020.

Bureau of Indian Standards

The National Standards Body of India

MSME TESTING CENTRE CHENNAI

9445662299 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found