BIS - LIMS (Laboratory Information Management System)

CEG Test House & Research Centre Private Limited

CEG TOWER, B-11(G), MALVIYA INDUSTRIAL AREA, MALVIYA NAGAR, JAIPUR, Jaipur, Rajasthan, 302017

7339745333 [email protected]

Scope List

Reset

16 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2547 : Part 1 (1976)

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

POP, Retarted Hemihydrate Gypsum, Anhydrous, Keene's

9500 View breakup
Rs.9500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Table-1(Beta hemihydrate, SO3)	-	600	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, SO3)	-	600	None
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. SO3)	-	600	None
Clause 4.1, Table-1(Keene's Plaster, SO3)	-	600	None
Clause 4.1, Table-1(Beta hemihydrate, CaO)	-	600	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, CaO)	-	600	None
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. CaO)	-	600	None
Clause 4.1, Table-1(Keene's Plaster, CaO)	-	600	None
Clause 4.1, Table-1(Beta hemihydrate, Soluble magnesium salts as MgO)	-	600	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO)	-	600	None
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO)	-	600	None
Clause 4.1, Table-1(Keene's Plaster, Soluble magnesium salts as MgO)	-	600	None
Clause 4.1, Table-1(Beta hemihydrate, Soluble sodium salts as Na2O)	-	600	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O)	-	600	None
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O)	-	600	None
Clause 4.1, Table-1(Keene's Plaster, Soluble sodium salts as Na2O)	-	600	None
Clause 4.1, Table-1(Beta hemihydrate,. Loss of ignition)	-	800	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Loss of ignition)	-	800	None
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition)	-	800	None
Clause 4.1, Table-1(Keene's Plaster, Loss of ignition)	-	800	None
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime)	-	600	None
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	1500	None
Cl 5.2, Table 3(Transverse Strength)	-	900	None
Cl 5.2, Table 4(Soundness)	-	900	None
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	800	None
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	800	None
Cl 5.2, Table 7(Expansion On Setting %Max)	-	800	None

Complete

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

Fe 410 (Chemical), Grade I, II, Medium Tensile Steel

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.3(Press)	-	-		-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	-		-

Complete

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

Hard Drawn Steel Wire

3000 View breakup
Rs.3000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	400	None
Clause 3.1.1(Phosphorus)	-	400	None
Cl 7(UTM)	-	1200	Ultimate tensile test - 400 % Elongation - 300 Proof Stress (0.2 %) - 500
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1000	None

Complete

-
-

IS 702 (1988)

Specification for indusrial bitumen (Second Revision)

85/40, 85/25, 90/15, 115/15, 135/10, 155/6

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 and 6.1 Table 1(Specific Gravity, 85/25)	-	500	None
5.1 and 6.1 Table 1(Specific Gravity, 85/40)	-	500	None
5.1 and 6.1 Table 1(Specific Gravity, 90/15)	-	500	None
5.1 and 6.1 Table 1(Specific Gravity, 115/15)	-	500	None
5.1 and 6.1 Table 1(Specific Gravity 135/10)	-	500	None
5.1 and 6.1 Table 1(Specific Gravity 155/6)	-	500	None
5.1 and 6.1 Table 1(Flash point, Cleavland open cup)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 85/25)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 85/40)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 90/15)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 115/15)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 135/10)	-	700	None
5.1 and 6.1 Table 1(Softneing Point 155/6)	-	700	None
5.1 and 6.1 Table 1(Penetration at 25C 155/6)	-	900	None
5.1 and 6.1 Table 1(Penetration at 25C 135/10)	-	900	None
5.1 and 6.1 Table 1(Penetration at 25C 115/15)	-	900	None
5.1 and 6.1 Table 1(Penetration at 25C 90/15)	-	900	None
5.1 and 6.1 Table 1(Penetration at 25C 85/25)	-	900	None
5.1 and 6.1 Table 1(Penetration at 25C 85/40)	-	900	None
5.1 and 6.1 Table 1(loss on heating)	-	1000	None
5.1 and 6.1 Table 1(Penetration of residue at 25C)	-	1200	None
5.1 and 6.1 Table 1(Matter Soluble in trichloroethylene)	-	500	None

Complete

-
-

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

Sulphate Resisting Portland Cement

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1400	350 each for silica, calcium, alumina and iron oxide
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	350	None
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	350	None
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	350	None
4.1 - Table - 1 v(Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	350	None
4.1 - Table - 1 vi(Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-	350	None
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	300	None
5.1(Fineness 4031 Part 2)	-	500	None
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	500	None
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	800	None
5.3 a)(Setting Time Initial- 4031 Part 5)	-	400	None
5.3 b)(Setting Time Final- 4031 Part 5)	-	400	None
5.4(Salphate Expansion (Optional))	-	600	None
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2500	None
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2500	None
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2500	None
5.6(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	None

Complete

-
-

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

Rapid Hardening Portland Cement

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1400	350 each for silica, calcium, alumina and iron oxide
5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	700	None
5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	350	None
5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	350	None
5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	350	None
5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	300	None
6.1(Fineness 4031 Part 2)	-	500	None
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	500	None
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	800	None
6.3 a)(Setting Time Initial- 4031 Part 5)	-	400	None
6.3 b)(Setting Time Final- 4031 Part 5)	-	400	None
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	1600	None
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1600	None
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	None

Complete

-
-

IS 8043 (1991)

Specification for hydrophobic Portland cement

Hydrophobic Portland Cement

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (ref. 6 - Table - 1 i of IS 269:2015)(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1400	350 each for silica, alumina, calcium and iron oxide
5.1 (ref. 6 - Table - 1 ii of IS 269:2015)(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	700	None
5.1 (ref. 6 - Table - 1 iii of IS 269:2015)(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	350	None
5.1 (ref. 6 - Table - 1 iv of IS 269:2015)(Magnesia - Cl 4.8 of IS 4032:1985)	-	350	None
5.1 (ref. 6 - Table - 1 v of IS 269:2015)(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	350	None
5.1 (ref. 6 - Table - 1 vi of IS 269:2015)(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	300	None
5.1 (ref. 6 - Table - 1 vii of IS 269:2015)(Chloride content - Cl 4.13 of IS 4032:1985)	-	350	None
5.1 (ref. 6 - Table - 1 viii of IS 269:2015)( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	350	None
6.1(Fineness 4031 Part 2)	-	500	None
6.2(Expansion by Le Chatelier- IS 269 & 4031 Part 3)	-	500	None
6.2(Expansion by Autoclave- IS 269 & 4031 Part 3)	-	800	None
6.2(Setting Time Initial- IS 269 & 4031 Part 5)	-	400	None
6.2(Setting Time Final- IS 269 & 4031 Part 5)	-	400	None
6.3 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2500	None
6.3 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2500	None
6.3 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2500	None
6.4(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	None

Complete

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction Water and concrete

- View breakup
Rs.10500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

Packaged Natural Mineral Water

16500 View breakup
Rs.16500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table-1 i(Colour)	-	100	10% discount on complete testing charges
6.2 Table-1 ii(Odour)	-	400	10% discount on complete testing charges
6.2 Table-1 iii(Taste)	-	100	10% discount on complete testing charges
6.2 Table-1 iv(Turbidity)	-	450	10% discount on complete testing charges
6.2 Table-1 v(Total dissolved solids)	-	450	10% discount on complete testing charges
6.2 Table-1 vi(pH)	-	150	10% discount on complete testing charges
6.2 Table-2 i(Nitrate (as NO3))	-	500	10% discount on complete testing charges
6.2 Table-2 ii(Nitrite (as NO2))	-	500	10% discount on complete testing charges
6.2 Table-2 iii(Sulphide (as H2S))	-	500	10% discount on complete testing charges
6.2 Table-2 xii(Chloride (as Cl))	-	400	10% discount on complete testing charges
6.2 Table-2 xiii(Sulphate (as SO4),)	-	500	10% discount on complete testing charges
6.2 Table-2 xiv(Magnesium (as Mg))	-	450	10% discount on complete testing charges
6.2 Table-2 xv(Calcium (as Ca))	-	450	10% discount on complete testing charges
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	300	10% discount on complete testing charges
6.2 Table-2 xix(Mineral Oil)	-	450	10% discount on complete testing charges
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	450	10% discount on complete testing charges
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	450	10% discount on complete testing charges
6.2 Table-3 iii(Cyanide (as CN))	-	450	10% discount on complete testing charges
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	500	10% discount on complete testing charges
6.1.2(Coliform , bacteria)	-	500	10% discount on complete testing charges
6.1.3(Faecal Streptococci )	-	500	10% discount on complete testing charges
6.1.3(Staphylococcus Aureus)	-	500	10% discount on complete testing charges
6.1.4(Sulphite Reducing Anaerobes )	-	500	10% discount on complete testing charges
6.1.5(Pseudomonas Aeruginosa )	-	500	10% discount on complete testing charges
6.1.6(Yeast and Mould )	-	500	10% discount on complete testing charges
6.1.7(Salmonella )	-	500	10% discount on complete testing charges
6.1.7(Shigella)	-	500	10% discount on complete testing charges
6.1.8(Vibrio cholera )	-	500	10% discount on complete testing charges
6.1.8(Vibrio parahemolyticus)	-	500	10% discount on complete testing charges
6.2 Table-2 iv(Manganese (as Mn))	-	450	10% discount on complete testing charges
6.2 Table-2 v(Copper (as Cu))	-	450	10% discount on complete testing charges
6.2 Table-2 vi(Zinc (as Zn))	-	450	10% discount on complete testing charges
6.2 Table-2 vii(Flouride (as F))	-	450	10% discount on complete testing charges
6.2 Table-2 viii(Barium (as Ba))	-	450	10% discount on complete testing charges
6.2 Table-2 ix(Antimony (as Sb))	-	450	10% discount on complete testing charges
6.2 Table-2 x(Borates (as B))	-	450	10% discount on complete testing charges
6.2 Table-2 xi(Silver (as Ag))	-	450	10% discount on complete testing charges
6.2 Table-2 xvi(Sodium (as Na))	-	450	10% discount on complete testing charges
6.2 Table-2 xviii(Selenium (as Se))	-	450	10% discount on complete testing charges
6.2 Table-3 i(Arsenic (as As))	-	450	10% discount on complete testing charges
6.2 Table-3 ii(Cadmium (as Cd))	-	450	10% discount on complete testing charges
6.2 Table-3 iv(Chromium (as Cr))	-	450	10% discount on complete testing charges
6.2 Table-3 v(Mercury (as Hg))	-	450	10% discount on complete testing charges
6.2 Table-3 vi(Lead (as Pb)	-	450	10% discount on complete testing charges
6.2 Table-3 vii(Nickel (as Ni))	-	450	10% discount on complete testing charges
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	3000	10% discount on complete testing charges
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	3000	10% discount on complete testing charges
6.3(o,p DDD)	-	500	10% discount on complete testing charges
6.3(p,p DDD)	-	500	10% discount on complete testing charges
6.3(o,p DDE)	-	500	10% discount on complete testing charges
6.3(p, DDE)	-	500	10% discount on complete testing charges
6.3(o,p DDT)	-	500	10% discount on complete testing charges
6.3(p,p DDT)	-	500	10% discount on complete testing charges
6.3(α Endosulfan)	-	500	10% discount on complete testing charges
6.3(β Endosulfan)	-	500	10% discount on complete testing charges
6.3(Endosulfan Sulphate)	-	500	10% discount on complete testing charges
6.3(Monocrotophos)	-	500	10% discount on complete testing charges
6.3(Ethion)	-	500	10% discount on complete testing charges
6.3(Chlorpyrifos)	-	500	10% discount on complete testing charges
6.3(Phorate)	-	500	10% discount on complete testing charges
6.3(2,4-D)	-	500	10% discount on complete testing charges
6.3(Butachlor)	-	500	10% discount on complete testing charges
6.3(Isoproturon)	-	500	10% discount on complete testing charges
6.3(Alachlor)	-	500	10% discount on complete testing charges
6.3(Atrazine)	-	500	10% discount on complete testing charges
6.3(Methyl Parathion)	-	500	10% discount on complete testing charges
6.3(Methyl Paraoxon)	-	500	10% discount on complete testing charges
6.3(Malathion)	-	500	10% discount on complete testing charges
6.3(Malaoxon)	-	500	10% discount on complete testing charges
6.3(Aldrin)	-	500	10% discount on complete testing charges
6.3(Dieldrin)	-	500	10% discount on complete testing charges
6.3(α-HCH)	-	500	10% discount on complete testing charges
6.3(β-HCH)	-	500	10% discount on complete testing charges
6.3(γ-HCH (Lindane))	-	500	10% discount on complete testing charges
6.3(δ-HCH)	-	500	10% discount on complete testing charges
6.3(Phorate sulphoxide)	-	500	10% discount on complete testing charges
6.3(phorate sulphone)	-	500	10% discount on complete testing charges

Complete

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

M-30, M-35, M-40, M-50, M-55

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 & 7.1(VISUAL INSPECTION)	-	1500	None
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	1500	Charges for Dimensions
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	1500	Charges for Dimensions
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	1500	Charges for Dimensions
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	1500	Charges for Dimensions
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	1500	Charges for Dimensions
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	1500	Charges for Dimensions
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	1500	Charges for Dimensions
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	800	None
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	800	None
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	1200	None
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	900	None
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	2000	None
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	2000	None
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	900	None
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	900	None
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	1500	None
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	1500	None
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	1200	None
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	1200	None

Complete

-
-

IS 651 (2007)

Glazed stoneware pipes and fittings - Specification (Sixth Revision)

SP1, SP2, SP3

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Hydraulic Test)	-	-	-
7.3(Absorption Test)	-	-	-
Clause 7.4(Acid Resistance Test)	-	-	-
Clause 7.5(Alkali Resistance Test)	-	-	-

Complete

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe - 415, 415D, 415S, 500, 500D, 500S, 600, 650, 700

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	-	-
Cl 7.2(Weight)	-	-	-
Cl 9.3(Load In One Direction)	-	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-	-

Complete

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

General Purpose & Heavy Duty Floor Tiles

4500 View breakup
Rs.4500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	None
Cl 12.2(Concavity & Convexity )	-	400	None
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	400	None
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	400	None
Cl 12.5(Water absorption)	-	500	None
Cl 12.6(Wet transverse strength )	-	800	None
Cl 12.7(Resistance to wear)	-	1200	None

Complete

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

Fly based

8850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	350	None
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	350	None
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	350	None
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300	None
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	350	None
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	350	None
7 -Table 2- i(Fineness 4031 Part 2)	-	500	None
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	None
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	800	None
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	400	None
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	400	None
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	None
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	None

Complete

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Calcined Clay Based

8850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	350	None
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	350	None
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	350	None
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300	None
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	350	None
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	350	None
7 -Table 2- i(Fineness 4031 Part 2)	-	500	None
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	None
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	800	None
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	400	None
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	400	None
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1600	None
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	None
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	None

Complete

-
-

IS 8887 (2018)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

RS-1, RS-2, MS, SS-1, SS-2

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad MS) Annex 9)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2, IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-2), Annex C)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad MS), Annex C)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-1), Annex C)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-2), Annex C)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-2), Annex D)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade MS), Annex D)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-1), Annex D)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-2), Annex D)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(v)(Particle charge (Grad RS-2), Annex E)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(v)(Particle charge (Grad MS), Annex E)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(v)(Particle charge (Grad SS-1), Annex E)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(v)(Particle charge (Grad SS-2), Annex E)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade RS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade RS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade MS) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade SS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade SS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance: Coating, after spraying (Grade RS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance: Coating, after spraying (Grade RS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance: Coating, after spraying (Grade MS) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance: Coating, after spraying (Grade SS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance: Coating, after spraying (Grade SS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance: Coating, wet aggregate (Grade RS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance: Coating, wet aggregate (Grade RS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance: Coating, wet aggregate (Grade MS) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance: Coating, wet aggregate (Grade SS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance: Coating, wet aggregate (Grade SS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance: Coating, After Spraying (Grade RS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance: Coating, After Spraying (Grade RS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance: Coating, After Spraying (Grade MS) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance: Coating, After Spraying (Grade SS-1) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance: Coating, After Spraying (Grade SS-2) Annex F)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-2) Annex G)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade MS) Annex G)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-1) Annex G)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-2) Annex G)	-	700	Rate applicable for all grades
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H)	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-2) Annex H)	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade MS) Annex H)	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-1) Annex H)	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-2) Annex H)	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-1) Annex J)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-2) Annex J)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade MS) Annex J)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-1) Annex J)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-2) Annex J)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-1) IS 1203)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-2) IS 1203)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade MS) IS 1203)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-1) IS 1203)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-2) IS 1203)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-1) IS 1208)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-2) IS 1208)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade MS) IS 1208)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-1) IS 1208)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-2) IS 1208)	-	800	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne, (Grade RS-1) IS 1216)	-	600	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne, (Grade RS-2) IS 1216)	-	600	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne, (Grade MS) IS 1216)	-	600	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne, (Grade SS-1) IS 1216)	-	600	Rate applicable for all grades
6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne, (Grade SS-2) IS 1216)	-	600	Rate applicable for all grades
6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(xi)(Water content (Grade RS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(xi)(Water content (Grade RS-2))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(xi)(Water content (Grade MS))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(xi)(Water content (Grade SS-1))	-	500	Rate applicable for all grades
6.6.2 Table-1; 1(xi)(Water content (Grade SS-2))	-	500	Rate applicable for all grades

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CEG Test House & Research Centre Private Limited

CEG TOWER, B-11(G), MALVIYA INDUSTRIAL AREA, MALVIYA NAGAR, JAIPUR, Jaipur, Rajasthan, 302017

7339745333 [email protected]

Scope List

No Record Found