BIS - LIMS (Laboratory Information Management System)

ACE TEST LAB

Industrial Plot No 69 , Khasra No.54 G.T.K. Road Nangli Poona, New Delhi, North West, Delhi, 110036

8800848474 [email protected]

Scope List

Reset

13 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS Testing

1000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Testing clause 2(Testing clause 2 parameter)	-	1000		-

Complete

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

Mobile phone handsets Part 3 Indian language support

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		-
5.2(Message Readability)	-	15000		-

Complete

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Storage Batteries

740000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	0	-
5.1(Mechanical Endurance)	-	0	-
5.2(Charge efficiency)	-	0	-
5.3(Deep discharge protection)	-	0	-
5.4(Marking)	-	0	-
5.5(Dafety)	-	0	-
5.6(Documentation)	-	0	-
6(Finctional Characteristics)	-	0	-
7(General test conditions)	-	0	-
8.1(Capacity test)	-	40000	-
8.2(Endurance test)	-	200000	-
8.3(Charge retention test)	-	60000	-
8.4(Cycle endurance in Photovoltaic application)	-	250000	-
8.5(Sulphation Test)	-	100000	-
8.6(Water loss test)	-	75000	-
8.7(Non spillability)	-	15000	-

Complete

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

Lithium System Cells and Batteries

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Tyoe Test amd Sample Size)	-	2000	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	9000	-
7.2(Intended Use)	-	8000	-
7.3(Reasonably foreseeable misuse)	-	33000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

Complete

-
-

IS 16046 : Part 1 (2018)

Nickel System Cells And Batteries

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	31000	-
7.3(Reasonably foreseeable misuse)	-	24000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

INFORMATION TECHNOLOGY EQUIPMENT — SAFETY PART 1

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Abnormal operating and fault conditions)	-	5000	-
4.5(Thermal requirements)	-	2000	-
1.6(Power interface .)	-	3000	-
2.2(SELV circuits)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.3(TNV circuits)	-	2000	-
2.5(Limited power sources .)	-	2000	-
2.6(Provisions for earthing and bonding)	-	2000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	-
2.8(Safety interlocks)	-	2000	-
2.9(Electrical insulation)	-	2000	-
2.10(Clearances, creepage distances and distances through insulation)	-	4000	-
3.1(General)	-	0	-
3.2(Connection to a mains supply)	-	2000	-
3.3(Wiring terminals for connection of external conductors)	-	2000	-
3.4(Disconnection from the mains supply)	-	2000	-
3.5(Interconnection of equipment)	-	2000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.6(Openings in enclosures)	-	3000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	-
1.5(Components)	-	0	-
2.4(Limited current circuits)	-	2000	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.8.7(Switches and Relay)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.4(Opto-coupler)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.2.8(Cathode Ray Tubes)	-	0	-
4.3.8(Batteries)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
4.3.12(Flammable liquids)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	0	-
Annex K(Thermal Control)	-	0	-
Annex Q(Voltage Dependent Resistors)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-

Complete

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	0	-
6(Interchangeability)	-	2500	-
7(Protection against accidental contact with live parts)	-	4500	-
8(Insulation Resistance and Electric Strength)	-	2500	-
9(MECHANICAL STRENGTH)	-	3000	-
10(cap temperature)	-	4000	-
11(Resistance to Heat)	-	4000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	4500	-
14(Creepage distance and clearances)	-	1000	-

Complete

-
-

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION

1000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	18518	-
10.2(Accessibility test (MST 11))	-	18518	-
10.3(Cut susceptibility test (MST 12))	-	18518	-
10.4(Ground Continuity Test (MST 13))	-	18518	-
10.5(Impulse voltage test (MST 14))	-	18518	-
10.6(Dielectric withstand test (MST 16))	-	18518	-
10.7(Temperature test (MST 21))	-	18518	-
10.8(Fire test (MST 23))	-	18518	-
10.9(Reverse Current overload test (MST 26))	-	18518	-
10.10(Module breakage test (MST 32))	-	18518	-
11.1(Partial discharge-test (MST 15))	-	18518	-
11.2(Conduit Bending test (MST 33))	-	18518	-
11.3(Terminal box knockout tests (MST 44))	-	18518	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	18518	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	18518	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	18518	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	18518	-
Cl.5, Table 7(UV resistance (MST 54))	-	18518	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	18518	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	18518	-
Cl.5, Table 7(Hot spot test (MST 22))	-	18518	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	18518	-
10.33 IS/IEC 61730-2(Dry heat conditioning MST 56)	-	18518	-
10.32 IS/IEC 61730-2(Cold conditioning MST 55)	-	18518	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	18518	-
10.30 IS/IEC 61730-2(Damp heat test MST 53)	-	18518	-
10.29 IS/IEC 61730-2(Humidity-freeze test MST 52)	-	18518	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	18518	-
10.27 IS/IEC 61730-2(Robutness of terminations test MST 42)	-	18518	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	18518	-
10.25 IS/IEC 61730-2(Lap shear strength test MST 36)	-	18518	-
10.24 IS/IEC 61730-2(Peel test MST 35)	-	18518	-
10.23 IS/IEC 61730-2(Static Mechanical load test MST 34)	-	18518	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	18518	-
10.21 IS/IEC 61730-2(Module breakage test MST 32)	-	18518	-
10.20 IS/IEC 61730-2(Reverse current overload test MST 25)	-	18518	-
10.19 IS/IEC 61730-2(Bypass diode thermal test MST 25)	-	18518	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	18518	-
10.17 IS/IEC 61730-2(Fire test MST 23)	-	18518	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	18518	-
10.15 IS/IEC 61730-2(Temperature test MST 21)	-	18518	-
10.14 IS/IEC 61730-2(Wet leakage current test MST 17)	-	18518	-
10.13 IS/IEC 61730-2(Insulation test MST 16)	-	18518	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	18518	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	18518	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	18518	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	18518	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	18518	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	18518	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	18518	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	18518	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	18518	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	18518	-
10.2 IS/IEC 61730-2(Visual inspection MST01)	-	18546	-

Complete

-
-

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	20000	-
4(Construction requirements)	-	20000	-
5(Polymeric materials)	-	20000	-
6(Internal wiring and current-carrying parts)	-	20000	-
7(Connections)	-	20000	-
8(Bonding and grounding)	-	20000	-
9(Creepage and clearance distances)	-	20000	-
10(Field wiring compartments with covers)	-	20000	-
11(Marking)	-	20000	-
12()	-	20000	-

Complete

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

SAFETY OF LAMP CONTROLGEAR

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1500.02	ok
8(Protection against accidental contact with live parts)	-	2666.66	ok
9(Terminals)	-	3166.66	ok
10(PROVISION FOR EARTHING)	-	1500	ok
11(MOISTURE RESISTANCE)	-	2500	ok
12(Electric Strength)	-	2500	ok
13(Thermal endurance test for winding of ballasts)	-	1000	ok
14(Fault conditions)	-	1000	ok
15(Transformer heating)	-	2500	ok
16(Construction)	-	3166.66	ok
17(Creepage distance and clearances)	-	1000	ok
18(Screws, current carrying parts and connections)	-	1500	ok
19(Resistance to heat, fire and tracking)	-	4000	ok
20(Resistance to corrosion)	-	2000	ok

Complete

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

Uninterruptible Power Systems (UPS)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	-
4.6(Power interface)	-	3000	-
4.7(Marking & instructions)	-	1000	-
5.1(Protection against shock and energy hazards)	-	1500	-
5.2(Requirement of auxiliary circuits)	-	1000	-
5.3(Protective earthing and bonding)	-	1500	-
5.4(AC and DC power isolation)	-	2000	-
5.5(Over current and earth fault condition)	-	2000	-
5.6(Safety interlocks)	-	5000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
6.1(Wiring, connections and supply)	-	1000	-
6.2(Connection to power)	-	2000	-
6.3(Wiring terminals for external power conductors)	-	2000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	2500	-
7.3(MECHANICAL STRENGTH)	-	2000	-
7.4(Construction details)	-	2000	-
7.5(Resistance to fire)	-	3000	-
7.6(Battery location)	-	1500	-
7.7(Temperature rise)	-	3000	-
8.1(General procision for earth leakage)	-	2000	-
8.2(Electric Strength)	-	2000	-
8.3(Abnormal operating and fault conditions)	-	3000	-
9.0(Connection to telecommunication networks)	-	3000	-

Complete

-
-

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

740000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	39333.33	-
10.1(Visual inspection)	-	39333.33	-
10.2(Maximum power determination)	-	39333.33	-
10.3(Insulation test)	-	39333.33	-
10.4(Measurement of temperature coefficients)	-	39333.33	-
10.5(Measurement of NOCT)	-	39333.33	-
10.6(Performance at STC and NOCT)	-	39333.33	-
10.7(Performance at low irradiance)	-	39333.33	-
10.8(Outdoor exposure test)	-	39333.33	-
10.9(Hot-spot endurance test)	-	39333.33	-
10.10(UV preconditioning)	-	39333.33	-
10.11(Thermal cycling test)	-	36888.90	-
10.12(Humidity freeze test)	-	36888.90	-
10.13(Damp heat test)	-	36888.92	-
10.14(Robustness of termination test)	-	39333.33	-
10.15(Wet leakage current test)	-	39333.33	-
10.16(Mechanical load test)	-	39333.33	-
10.17(Hail test)	-	39333.33	-
10.18(Bypass diode thermal' test)	-	39333.33	-

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, Video and Similar Electronic Apparatus — Safety

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	0	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	7000	-
8(Constructional requirements with regard to the protection against electric shock)	-	6000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	11000	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	8000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
14(Components)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

ACE TEST LAB

Industrial Plot No 69 , Khasra No.54 G.T.K. Road Nangli Poona, New Delhi, North West, Delhi, 110036

8800848474 [email protected]

Scope List