BIS - LIMS (Laboratory Information Management System)

INSPECTION SYNDICATE OF INDIA PVT. LTD.

76/A, DHAN DEVI KHANNA ROAD, PHOOL BAGAN, Kolkata, Kolkata, West Bengal, 700054

9051093322 [email protected]

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	300	-
4.1(Fabric)	-	100	-
4.2 IS 9113(Seam )	-	100	-
4.3 IS 9113(Hemming at the Mouth )	-	100	-
4.4 Annex B(Freedom from Defects)	-	100	-
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	100	-
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	100	-
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	100	-
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	100	-
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	100	-
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	250	-
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	250	-
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	100	-
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	100	-
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	100	-

Complete

16 Oct, 2022

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	200	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	100	-
3.3.1(Bottom seam (IS 10789))	-	200	-
4.2 and Table 1 ii(Dimensions )	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
4.2 and Table 1 v(Mass of sack )	-	100	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	600	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	600	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	-
4.2 and Table 1 x(Ash content )	-	500	-

Complete

16 Oct, 2022

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	100	-
4.2(Tapes – Linear Density )	-	100	-
4.3.1(Bottom Seam)	-	100	-
4.2(Construction)	-	100	-
4.3.1(The two rows of stitches shall be separated from each other)	-	100	-
4.3.1( The outer stitch)	-	100	-
4.3.1(stitches/dm)	-	100	-
4.3.2(Mouth)	-	100	-
4.4(Mass of the loose liner )	-	100	-
4.4(Width of the loose liner)	-	100	-
4.4(Length of the line)	-	100	-
4.4(Bottom seam of the loose liner)	-	100	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	100	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	100	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	100	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	100	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	250	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	250	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	250	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	250	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	-
5.2 and Table 1 x(Ash content )	-	400	-

Complete

16 Oct, 2022

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	100	-
4.2(Tapes – Linear Density )	-	100	-
4.3.1( The two rows of stitches shall be separated from each other)	-	40	-
4.3.1( The outer stitch)	-	40	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	40	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	40	-
4.3.1(The number of stitches/dm)	-	40	-
4.3.2(Mouth)	-	100	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	100	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	100	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
5.1 and Table 1 v(Mass of sack )	-	100	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	-
5.2 and Table 1 x(Ash content )	-	500	-

Complete

16 Oct, 2022

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	500	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	100	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	100	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	100	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2500	-
4.1 , Table 1(REQUIREMENTS)	-	2500	-
3.2(MANUFACTURE)	-	200	-

Complete

16 Oct, 2022

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

6550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	100	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	100	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	100	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	100	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	100	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	100	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	100	-
4.2 (Linear Density, 900 denier)	-	100	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	100	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	100	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	100	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	100	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	250	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	250	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	250	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	250	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	250	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	250	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	350	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	2000	-

Complete

16 Oct, 2022

-
-

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	100	-
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	100	-
4-4.1(MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-	100	-
4-4.1-b)(MANUFACTURE)	-	100	-
4-4.3(Manufacture-Safety Stitch )	-	0	-
4-4.4(Manufacture-Hemming at the Mouth )	-	100	-
4-4.5(Manufacture- Freedom from Defects )	-	100	-
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	100	-
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	100	-
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	100	-
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	100	-
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	100	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	200	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	200	-
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	200	-
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	100	-
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	200	-

Complete

16 Oct, 2022

-
-

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl4.2( IS 9113 )(HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-	100	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	100	-
Cl.4.4 (IS 19113)( Joined Bag The joining shall be done in such a manner that warp and weft shall run in the same direction.)	-	100	-
Cl.4.5( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-	100	-
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	100	-
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	100	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	100	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	100	-
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	400	-
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	200	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	100	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113(For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-	0	-
Cl.5.2 & Table 2. Cl 8.2 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Moisture regain percent, Max)	-	100	-
Cl.5.2 & Table 2. IS 2969( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-	400	-

Complete

16 Oct, 2022

-
-

IS 1943 (1995)

Textiles – A-twill jute bags (second revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sacking- IS 1943)	-	100	-
4.2(Seam -- IS 1943)	-	100	-
4.3(Safety Stitches -IS 1943)	-	100	-
4.4(Hemming at the mouth IS 9113)	-	100	-
4.5(Joined bag - IS 9113)	-	100	-
4.6(Freedom from defects- IS 1943)	-	100	-
4.1,5.1,Table 1(Dimension;Outside Length-IS 9113)	-	100	-
4.1,5.1,Table 1(Dimension;Outside width-IS 9113)	-	100	-
4.1,5.1,Table 1(Ends /dm -IS 1963)	-	100	-
4.1,5.1,Table 1(Picks/dm -IS 1963)	-	100	-
4.1,5.1,Table 1(Corrected Mass/Bag,g-IS 9113)	-	100	-
4.1,5.1,Table 1(Average Breaking Strength in N -IS 1969 N)	-	250	-
4.1,5.1,Table 1(Average breaking load of seam-IS 9030)	-	250	-
4.1,5.1,Table 1(Moisture Regain, Percent-IS 9113)	-	100	-
4.1,5.1,Table 1(Oil content, Percent-IS 2969)	-	300	-

Complete

16 Oct, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

INSPECTION SYNDICATE OF INDIA PVT. LTD.

76/A, DHAN DEVI KHANNA ROAD, PHOOL BAGAN, Kolkata, Kolkata, West Bengal, 700054

9051093322 [email protected]

Scope List