BIS - LIMS (Laboratory Information Management System)

Scientific and Industrial Testing And Research Centre

83 & 84 Avarampalayam Road, K.R.Puram (P.O.), Coimbatore - 641006, COIMBATORE, Coimbatore, Tamil Nadu, 641006

6369793937 [email protected]

Scope List

Reset

22 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14582 (2021)

Single-phase small ac electric motors for centrifugal pumps for agricultural applications

3800 View breakup
-

Clause No.	Exclusion	Remark
9(Dimension)	-	-
12.6(High Voltage Test - Voltage)	-	-
12.6(High Voltage Test - Current)	-	-
14(Direction of rotation)	-	-
12.5(Insulation Resistance Test)	-	-
13 & 16.2 e(Load Test - Current)	-	-
13 & 16.2 e(Load Test - Efficiency)	-	-
13 & 16.2 e(Load Test - Frquency)	-	-
13 & 16.2 e(Load Test - Input Power)	-	-
13 & 16.2 e(Load Test - Load Torque)	-	-
13 & 16.2 e(Load Test - Power Factor)	-	-
13 & 16.2 e(Load Test - Speed)	-	-
13 & 16.2 e(Load Test - Voltage)	-	-
16.2.d(Locked Rotor Test - Current)	-	-
16.2.d(Locked Rotor Test - Torque)	-	-
12.2.2(Momentary Over Load Test - Torque)	-	-
16.2 b(No Load Test - Current)	-	-
16.2 b(No Load Test - Frequency)	-	-
16.2 b(No Load Test - Input Power)	-	-
16.2 b(No Load Test - Speed)	-	-
16.2 b(No Load Test - Voltage)	-	-
16.2 a(Resistance of Winding - Resistance)	-	-
12.3(Temperature Rise Test - Temperature)	-	-
12.4(Temperature Rise at reduced Voltage - Temperature)	-	-
14(Terminal Marking)	-	-

Complete

-
-

IS 17018 : Part 1 (2018)

Solar photovoltaic water pumping systems: Part 1 centrifugal pumps - Specification

133250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.3(Whole day Performance (with Sun simulator))	-	105000		0.75kW/1.0HP - Rs. 80000 1.50kW/2.0HP - Rs. 80000 2.20kW/3.0HP - Rs. 80000 3.70kW/5.0HP - Rs. 80000 5.50kW/7.50HP - Rs. 80000 7.50kW/10.0HP - Rs. 80000
10.3(Whole day Performance (real condition testing))	-	53250		0.75kW/1.0HP - Rs. 23150 1.50kW/2.0HP - Rs. 24350 2.20kW/3.0HP - Rs. 27500 3.70kW/5.0HP - Rs. 36550 5.50kW/7.50HP - Rs. 42500 7.50kW/10.0HP - Rs. 53250

Complete

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

15500 View breakup
-

Clause No.	Exclusion	Remark
Cl 8.1(UTM)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
5.7(PullOut (Bond Test))	-	-
Cl. 4.3(Visual Inspection.)	-	-
4.1(Sulphur and phosphorous)	-	-
4.1(Ni)	-	-
4.1(Mo)	-	-
4.1(Cr)	-	-
4.1( Ti)	-	-
4.1( Aluminium %)	-	-
4.1( Copper %)	-	-
4.1(Silicon %)	-	-
4.1(Sulphur %)	-	-
4.1(Phosphorus %)	-	-
4.1(Manganese %)	-	-
4.1(Carbon %)	-	-

Complete

-
-

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

17500 View breakup
-

Clause No.	Exclusion	Remark
13(Terminal Markings, IS 9283)	-	-
17.1(Performance values, IS 9283)	-	-
17.1(Performance values, IS 9283)	-	-
17.1(Performance values, IS 9283)	-	-
17.1(Performance values, IS 9283)	-	-
18.1(Overload test, IS 9283)	-	-
19(Temperature rise test, IS 9283)	-	-
19(Temperature rise test, IS 9283)	-	-
20(High Voltage test, IS 9283)	-	-
21(Insulation Resistance test, IS 9283)	-	-
22(Speed, IS 9283)	-	-
23(Leakage Current test, IS 9283)	-	-

Complete

-
-

IS 6595 : Part 2 (1993)

Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision)

7250 View breakup
-

Clause No.	Exclusion	Remark
7.1(Direction of Rotation)	-	-
7.2(Direction of Rotation)	-	-
8.1(Design Limitations)	-	-
8.2(Design Limitations Suction Limitations)	-	-
8.3(Design Limitations)	-	-
9.1(General Requirements)	-	-
9.2(General Requirements)	-	-
9.3(General Requirements Shaft)	-	-
9.4(General Requirements)	-	-
10.1(Pump test, tolerances, and verification of guarantee on Pump Performance)	-	-
10.4(Hydrostatic Test)	-	-

Complete

-
-

IS 6595 : Part 1 (2018)

Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision)

7250 View breakup
-

Clause No.	Exclusion	Remark
10.1(Pump Test Verification of the Guarantee Cl.9.4 of IS 9137:2019 Cl. 9.4.1 Curves QH and Qη)	-	-
10.1(Pump Test Verification of the Guarantee Cl.9.4 of IS 9137:2019 9.4.2 Efficiency)	-	-
10.1(Pump Test Verification of the Guarantee Cl.9.4 of IS 9137:2019 9.4.3 Pump Power Input)	-	-
8.1(Design Features Head Restrictions)	-	-
8.2 As per fig 1 & 2(Design Features Minimum efficiency )	-	-
8.3(Design Features Shaft )	-	-
9.1(General Requirements Volute Casing)	-	-
9.2(General Requirements Impeller)	-	-
10(Pump Test Verification of guarante Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	-
10(Pump Test Verification of guarante Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	-
12.2.2(Pump Power Input )	-	-
12.2.5(Vibrations )	-	-
12.2.5(Noise level)	-	-

Complete

-
-

IS 8472 (2019)

Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision)

6200 View breakup
-

Clause No.	Exclusion	Remark
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
16.1(Marking)	-	-
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	-
12.1(Pump Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	-
12.3(Hydrostatic Pressure Test)	-	-
12.3.1(Hydrostatic Pressure Test)	-	-
12.4(Pump tests)	-	-
12.5(Self-Priming Test for Self-Priming Pumps)	-	-
13.1.2(No Load Test at Rated Voltage)	-	-
13.1.2.1.1(Temperature Rise Test at Rated Voltage)	-	-
13.1.2.1.2(Temperature Rise Test at Reduced Voltage)	-	-
13.1.2(Break away torque Pull up torque)	-	-
13.1.2(High Voltage test)	-	-
13.1.2(Insulation Resistance)	-	-
8(Direction of Rotation)	-	-
7(Material of Constructional)	-	-
11.1(General Requirements)	-	-
13.1.2(Measurement of stator resistance)	-	-
13.1(Single phase monoset pumps)	-	-
13.1.2(Locked rotor test(cl.6.2(d) of IS 14582))	-	-
13(Tests for Electrical Performance)	-	-
7(Materials of Construction ( Casing/Chamber))	-	-
7(Materials of Construction ( Impeller))	-	-
7(Materials of Construction ( Shaft))	-	-
8.1, 8.2(The direction of rotation of pumps)	-	-
8.3(The direction of inlet and outlet flow passages)	-	-
10.1(Design Features)	-	-
10.1(a)(Design Features(Voltage Rangings))	-	-
10.1(b)(Design Features(Frequency Rangings))	-	-
10.1(c)(Design Features(Combination of Voltage and frequency variation))	-	-
11(General Requirements)	-	-
11.1(The pump shaft should be of adequate size to transmit the required power over the entire head range.)	-	-
11.2(The pump casing should be of robust construction and shall be tested to withstand hydrostatic pressure as specified in 12.3.)	-	-
11.3(The nominal size of suction and delivery pipe of the pump shall be as specified in IS 1239 (Part 1),IS 4984, IS 4985 and IS 12231)	-	-
13.2(Three phase monoset pumps)	-	-
13.2.2(Measurement of stator resistance test (cl.22.3.1(b) of IS 7538))	-	-
13.2.2(No load test (cl.22.3.1cb) of IS 7538))	-	-
13.2.2(Reduced voltage running test (cl.22.3.1(d) of IS 7538))	-	-
13.2.2(Locked Rotor test (cl.22.3.1(e) of IS 7538))	-	-
13.2.2(Insulation Resistance test (cl.22.3.1(m) of IS 7538))	-	-
13.2.2(High Voltage test (cl.22.3.1(n) of IS 7538))	-	-
15.2.1(Monoset pumps)	-	-
15.2.1(a)(Discharge, total head, current and input power at the Guarnteed duty point)	-	-
15.2.1(b)(Non overloading of the prime-mover I the declared operating head range)	-	-
15.2.1(c)(Rated output of motor)	-	-
15.2.1(d)(Full load speed of motor)	-	-
15.2.2(Bare pumps)	-	-
15.2.1(e)(Overall efficiency of pumpset)	-	-
15.2.1(f)(Max.self.priming time)	-	-
15.2.2(a)(Discharge, total head as per Guarnteed duty point at rated voltage and speed)	-	-
15.2.2(b)(Non overloading of the prime-mover I the declared operating head range)	-	-
15.2.2(c)(Non-over-rated prime mover recommended by the manufacturer)	-	-
15.2.2(d)(Max.self.priming time)	-	-

Complete

-
-

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

34000 View breakup
-

Clause No.	Exclusion	Remark
8.1(Design Features)	-	-
8.1.1(Design Features)	-	-
8.1.4(Design Features)	-	-
8.1.5(Design Features)	-	-
8.1.5(Design Features)	-	-
9(Efficiency)	-	-
10(Performance (Cl 17.1 of IS 5120))	-	-
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	-
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	-
10(Fluid Passages (Cl 17.3 of IS 5120))	-	-
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	-
10(Lantern Ring (Cl 17.5 of IS 5120))	-	-
10(Casing (Cl 17.6 of IS 5120))	-	-
10(Impeller (Cl 17.7 of IS 5120))	-	-
10(Shaft (Cl 17.8 of IS 5120))	-	-
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	-
10(Bearings (Cl 17.10 of IS 5120))	-	-
10(Bearings (Cl 17.10.1 of IS 5120))	-	-
10(Bearings (Cl 17.10.2 of IS 5120))	-	-
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	-
10(Base Plates (Cl 17.12 of IS 5120))	-	-
10(Prime Mover (Cl 17.13 of IS 5120))	-	-
10(Name Plate (Cl 17.14 of IS 5120))	-	-
10(Name Plate (Cl 17.14 of IS 5120))	-	-
10(Name Plate (Cl 17.14.1 of IS 5120))	-	-
10.2(Casing)	-	-
10.3(Impeller)	-	-
10.4.1(Shaft)	-	-
10.4.2(Shaft)	-	-
10.5.1(Balancing)	-	-
10.5.2(Balancing)	-	-
10.5.3(Balancing)	-	-
10.5.4(Balancing)	-	-
10.6.1( Provision for Earthing)	-	-
10.6.2( Provision for Earthing)	-	-
10.6.3( Provision for Earthing)	-	-
10.6.4( Provision for Earthing)	-	-
10.7.1(Terminal Marking and Direction of Rotation)	-	-
10.7.2(Terminal Marking and Direction of Rotation)	-	-
10.7.3(Terminal Marking and Direction of Rotation)	-	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	-
15.5(Hydrostatic Pressure Test)	-	-
16.1.1( Guarantee of Performance)	-	-
16.1.2( Guarantee of Performance)	-	-
16.1.3( Guarantee of Performance)	-	-
16.1.4( Guarantee of Performance)	-	-
16.1.5( Guarantee of Performance)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1(Marking)	-	-
18.1.3(Marking)	-	-
7(Constructional features)	-	-
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	-
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	-
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	-
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	-
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	-
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	-
8(Design Features)	-	-
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	-
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	-
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	-
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	-
12(Cable)	-	-
12.1(Flat/Round cables as per IS694 shall be used)	-	-
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	-
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	-
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	-
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	-
14.10.1(Type test)	-	-
14.10.1(a)(Insulation Resistance test)	-	-
14.10.1(b)(High Voltage test)	-	-
14.10.1(c)(Measurement of stator resistance)	-	-
14.10.1(d)(No load test at rated voltage)	-	-
14.10.1(e)(Reduced voltage running up test at no load)	-	-
14.10.1(f)(Locked rotor)	-	-
14.10.1(g)(Breakaway (starting) torque)	-	-
14.10.1(h)(Leakage current test;)	-	-
14.10.1(j)(Temperature rise test at rated voltage)	-	-
14.10.1(k)(Temperature rise test at reduced voltage)	-	-
16.1(Guarntee of Performance)	-	-
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	-
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	-
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	-
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	-
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	-
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	-
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	-
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	-

Complete

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-1 i (Colour)	-	100	-
5.3 Table-1 ii (Odour)	-	25	-
5.3 Table-1 iii (Taste)	-	75	-
5.3 Table-1 iv(Turbidity)	-	75	-
5.3 Table-1 v (Total dissolved solids)	-	150	-
5.3 Table-1vi (pH)	-	75	-
5.3 Table-2 i (Barium (as Ba))	-	25	-
5.3 Table-2 ii (Copper (as Cu))	-	25	-
5.3 Table-2 iii (Iron (as Fe),)	-	25	-
5.3 Table-2 iv (Manganese (as Mn))	-	25	-
5.3 Table-2 v (Nitrate (as NO3))	-	125	-
5.3 Table-2 vi (Nitrite (as NO2))	-	125	-
5.3 Table-2vii (Fluoride (as F))	-	100	-
5.3 Table-2 viii (Zinc (as Zn))	-	25	-
5.3 Table-2 ix (Silver (as Ag))	-	25	-
5.3 Table-2 x (Aluminium (as Al))	-	25	-
5.3 Table-2 xi (Chloride (as Cl))	-	125	-
5.3 Table-2 xii (Selenium (as Se),)	-	50	-
5.3 Table-2 xiii (Sulphate (as SO4),)	-	125	-
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-	100	-
5.3 Table-2 xv (Calcium (as Ca),)	-	25	-
5.3 Table-2 xvi (Magnesium (as Mg))	-	25	-
5.3 Table-2 xvii (Sodium (as Na))	-	25	-
5.3 Table-2 xviii (Residual free chlorine)	-	150	-
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	300	-
5.3 Table-2 xx (Mineral oil)	-	400	-
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	450	-
5.3 Table-2 xxii (Sulphide (as H2S))	-	100	-
5.3 Table-2 xxiii (Antimony (as Sb))	-	50	-
5.3 Table-2 xxiv (Borates (as B))	-	150	-
5.3 Table-2 xxv (Bromates (as BrO3),)	-	250	-
5.3 Table-3 i (Mercury (as Hg))	-	50	-
5.3 Table-3 ii (Cadmium (as Cd))	-	25	-
5.3 Table-3 iii (Arsenic (as As))	-	50	-
5.3 Table-3 iv (Cyanide (as CN))	-	350	-
5.3 Table-3 v (Lead (as Pb))	-	25	-
5.3 Table-3 vi(Chromium (as Cr))	-	25	-
5.3 Table-3 vii (Nickel (as Ni))	-	25	-
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	1050	-
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	750	-
5.4 i)(o,p DDT)	-	900	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDE)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(alpha-HCH)	-	900	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(phorate sulphone)	-	2	-
5.4 i)(2,4-D)	-	750	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(Isoproturon)	-	750	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4 i)(Malaoxon)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 ii)(Total pesticied residue)	-	0	-
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	225	-
5.2.2(Coliform)	-	175	-
5.2.3(Faecal Streptococci)	-	175	-
5.2.3(Staphylococcus Aureus)	-	225	-
5.2.4(Sulphite Reducing Anaerobes)	-	175	-
5.2.5(Pseudomonas Aeruginosa)	-	250	-
5.2.6(Aerobic Microbial Count at 37°C)	-	125	-
5.2.6(Aerobic Microbial Count at 20-22°C)	-	125	-
5.2.7(Yeast and Mould)	-	175	-
5.2.8(Salmonella)	-	400	-
5.2.8(Shigella)	-	325	-
5.2.9(Vibrio cholera)	-	275	-
5.2.9(Vibrio parahaemolyticus)	-	275	-

Complete

-
-

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

4600 View breakup
-

Clause No.	Exclusion	Remark
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
16.1(Marking and Diagram of connenctions)	-	-
10(Type of enclosures)	-	-
11(Methods of cooling)	-	-
9.1(General construction (as per Cl. 9 & F-3))	-	-
9(General construction (as per Cl. 9 & F-3))	-	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	-
9(General construction (as per Cl. 9 & F-3))	-	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	-
4.1(Rated Voltage)	-	-
4.2(Rated Frequency)	-	-
4.3(Rated Output)	-	-
4.4(Rated Speed)	-	-
7(Dimensions (Cl.App.F-4))	-	-
9.5(Earthing)	-	-
9.5(Earthing)	-	-
9.5(Earthing)	-	-
17.3 (a)(No load test at rated voltage and frequency )	-	-
17.3 (a)(No load test at rated voltage and frequency)	-	-
17.3 (a)(No load test at rated voltage and frequency)	-	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	-
12.7(Insulation resistance test)	-	-
13.1(High voltage test)	-	-
13.2(Moisture proofness)	-	-
13.2(Moisture proofness)	-	-
13.3(Leakage current test)	-	-
12.6(Vibration Severity)	-	-
15.2(Specific Requirements)	-	-
9.0(Observation)	-	-
7.2(Dimensions)	-	-
11.0(Observation)	-	-
17.3 (j)(Observation)	-	-
9.5(Observation)	-	-
14.0(Observation)	-	-
16.0(Observation)	-	-
17.4 & 9.4.6.1(Observation)	-	-
17.3 (k)(Current)	-	-
17.3 (m)(Vibration)	-	-
17.3 (g)(Insulation Resistance)	-	-
17.3 (h)(Voltage)	-	-
17.3 (b)(Temperature)	-	-
17.3 (e)(Temperature)	-	-
17.3 (f)(Torque)	-	-
17.3 (c)(Current, Torque)	-	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	-

Complete

-
-

IS 13730 : Part 3 (2012)

Specifications for particular types of winding wires: Part 3 polyester enamelled round copper wire, class 155 (First Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Nominal Conductor diameter)	-	0	-
4(Conductor tollerance )	-	0	-
4(Minimum increase due to the insulation)	-	0	-
4(Maximum overall diameter)	-	0	-
5(Electrical resistance)	-	0	-
6(Elongation)	-	0	-
7(Springiness)	-	0	-
8(Stretching test (nominal conductor diameters over 1,600 mm))	-	0	-
8(Jerk test (nominal conductor diameters up to and including 1,000 mm))	-	0	-
8(Peel test (nominal conductor diameters over 1,000 mm))	-	0	-
9( Heat shock)	-	0	-
10( Cut-through)	-	0	-
11(Resistance to abrasion :Minimum average force to failure )	-	0	-
11(Resistance to abrasion :Minimum force to failure of each measurement )	-	0	-
12(Resistance to solvents)	-	0	-
13(Breakdown voltage )	-	0	-
14(Continuity of insulation )	-	0	-
15(Temperature index)	-	85000	-
3.2(Appearance)	-	0	-
8(Flexibility and adherence)	-	0	-

Complete

-
-

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

9350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
6.1 (a)(Constructional Features)	-	0	-
6.1 (b)(Constructional Features)	-	0	-
6.1 (c)(Constructional Features)	-	0	-
6.1 (d)(Constructional Features)	-	0	-
6.1 (e)(Constructional Features)	-	0	-
6.1 (f)(Constructional Features)	-	0	-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	0	-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	0	-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	0	-
6.2 (d)(Material of construction Part Sub Assembly Discharge casing (if provided))	-	0	-
6.2 (e)(Material of construction Part Sub Assembly Impeller)	-	0	-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	0	-
6.2 (g)(Material of construction Part Sub Assembly Pump Shaft)	-	0	-
6.2 (h)(Material of construction Part Sub Assembly Suction Casing)	-	0	-
6.2.2.1(Gaskets, Seals and Packings)	-	0	-
6.2.2.2(Gaskets, Seals and Packings)	-	0	-
6.2.3(Gaskets, Seals and Packings)	-	0	-
6.2.4(Gaskets, Seals and Packings)	-	0	-
6.2.5(Gaskets, Seals and Packings)	-	0	-
7.1.1(Design features: Typical design features 0f components of pump)	-	0	-
7.1.2(Design features: Typical design features 0f components of pump)	-	0	-
7.1.3(Design features: Typical design features 0f components of pump)	-	0	-
7.1.4(Design features: Typical design features 0f components of pump)	-	0	-
7.1.5(Design features: Typical design features 0f components of pump)	-	0	-
7.1.6(Design features: Typical design features 0f components of pump)	-	0	-
8.1(General Requirements)	-	0	-
8.2(Casing)	-	0	-
8.3(Impeller)	-	0	-
8.4.1(Shaft)	-	0	-
8.4.2(Shaft)	-	0	-
8.5.1(Balancing)	-	0	-
8.5.2(Balancing)	-	0	-
8.7.1(Direction of Rotation)	-	0	-
8.7.2(Direction of Rotation)	-	0	-
8.8(Terminal Marking)	-	0	-
8.9.1(Typical Installation)	-	0	-
8.9.3(Typical Installation)	-	0	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	0	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	0	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	0	-
10.3(Hydrostatic Pressure Test)	-	0	-
11.1.1(Guarantee of Performance)	-	8650	-
11.1.2(Guarantee of Performance)	-	0	-
11.1.3(Guarantee of Performance)	-	0	-
11.1.4(Guarantee of Performance)	-	0	-
11.1.5(Guarantee of Performance)	-	0	-
8.9(Typical installation)	-	0	-
8.5(Balancing of rotor)	-	0	-
8.6(Submersible cable)	-	0	-
8.7(Direction of Rotation)	-	0	-
7(Design features)	-	0	-
7.1.10(Voltage & Frequency variation)	-	0	-
6(Measurement of shaft extension)	-	0	-
6(Constructional Features)	-	0	-
11(Guarantee of Performance)	-	0	-
10(Pump Performance test)	-	0	-
9.1(General)	-	0	-
9.10 (a)(Insulation Resistance test)	-	0	-
9.10 (b)(High Voltage test)	-	0	-
9.10 (c)(Measurement of Stator Resistance)	-	0	-
9.10 (d)(No Load Test at Rated Voltage)	-	0	-
9.10 (e)(Reduced voltage Running up test)	-	0	-
9.10 (f) & (g)(Locked Rotor Test)	-	0	-
9.10 (h)(Leakage current test)	-	0	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	0	-
9.10 (k)(Temperature rise test at reduced voltage)	-	0	-

Complete

-
-

IS 9079 (2018)

Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision)

7600 View breakup
-

Clause No.	Exclusion	Remark
10.1(GENERAL REQUIREMENTS Casing)	-	-
10.2(GENERAL REQUIREMENTS Impeller)	-	-
10.3(GENERAL REQUIREMENTS Shaft)	-	-
7.1(DIRECTION OF ROTATION (Cl 7))	-	-
7.2(DIRECTION OF ROTATION (Cl 7))	-	-
9.1(DESIGN FEATURES (Cl 9))	-	-
9.2(DESIGN FEATURES (Cl 9))	-	-
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	-
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	-
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	-
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	-
12.5(Efficiency)	-	-
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	-
Cl13.2.3 IS 9079:2002(Current consumption)	-	-
9.2(DESIGN FEATURES (Cl 9))	-	-
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	-
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	-
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	-
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	-
12.5(Efficiency)	-	-
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	-
Cl13.2.3 IS 9079:2002(Current consumption)	-	-
10(General Requirements)	-	-
10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing))	-	-
10.5(Provision of Earthing)	-	-
10.6.1(Terminal Marking)	-	-
10.6.2, 10.6.3(Direction of Rotation)	-	-
11.8(Type test)	-	-
11.8.1(a)(Measurement of stator resistance)	-	-
11.8.1(b)(High Voltage test)	-	-
11.8.1(c)(Insulation Resistance test)	-	-
11.8.1(d)(No load test at rated voltage)	-	-
11.8.1(e)(Locked rotor)	-	-
11.8.1(f)(Breakaway (starting) torque)	-	-
11.8.1(g)(Reduced voltage running up test at no load)	-	-
11.8.1(h)(Temperature rise test at rated voltage)	-	-
11.8.1(j)(Temperature rise test at reduced voltage)	-	-
13.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the limits indicated in clause 8 of IS 11346. However, after applying the tolerance, overall efficiency value shall not be less than that derived from Fig. 3 to 6.)	-	-
13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	-
13.1.4(The tolerance shall apply to guaranteed duty point only.)	-	-
8.6.5(If four core cable is used, the fourth core is to be used for earthing.)	-	-

Complete

-
-

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.2(Rating)	-	0	-
18.3(BIS Certification Marking )	-	0	-
15.3.2(Marking)	-	0	-
8.0(Earthing)	-	0	-
9.0(Terminal Marking)	-	0	-
11.0(DUTY AND RATING)	-	0	-
18.3(Marking)	-	0	-
16.2.1(Dimensions)	-	0	-
16.1.1(Insulation Resistance Test)	-	0	-
16.1.2(Measurement of Resistance of Windings of Stator)	-	0	-
16.1.3(No Load Test)	-	0	-
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	0	-
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	0	-
16.1.6(High Voltage Test)	-	0	-
16.2.2(Locked Rotor Test)	-	0	-
16.2.2.1(Locked Rotor Test)	-	0	-
16.2.2.2(Locked Rotor Test)	-	0	-
16.2.2.2.1(Locked Rotor Test)	-	0	-
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	0	-
16.2.2.3.1(Direct proportion method)	-	0	-
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	0	-
16.2.4(Temperature Rise Test)	-	0	-
16.2.5(Momentary Overload Test)	-	0	-
16.3.1( Test for Vibration Severity of Motor)	-	2400	-
16.3.2( Test for Noise Levels of Motor)	-	1100	-
16.3.3( Test for Degree of Protection by Enclosure)	-	10000	-
16.3.4(Over Speed Test)	-	2400	-
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	2400	-

Complete

-
-

IS 10805 (1986)

Specification for foot - Valves, reflux valves or non - Return valves and bore valves to be used in suction lines of agricultural pumping systems (First Revision)

3800 View breakup
-

Clause No.	Exclusion	Remark
(Cl.6)(Testing)	-	-
(Cl. 2 Table 1)(Dimensions)	-	-
(Cl. 5)(Coating)	-	-
(Cl. 2 Table 1)(Nominal Size)	-	-
(Cl.6)(Testing)	-	-

Complete

-
-

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

27400 View breakup
-

Clause No.	Exclusion	Remark
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.2(Loss of pressure)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-

Complete

-
-

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

13800 View breakup
-

Clause No.	Exclusion	Remark
Cl.3.1 (Conductor)	-	-
Cl.5.1.1 (Dimensions)	-	-
Cl.4(Material)	-	-
Cl. 6(Annealing Test)	-	-
Cl 6(Resistance Test)	-	-
Cl 4.1.2 (Visual examination)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-	-
Cl.4.1(Insulation )	-	-
Cl.4.2(Application)	-	-
Cl.4.4(Overall Diameter)	-	-
Cl.4.5(Finish)	-	-
Cl.4.6(High Voltage Test Water Immersion )	-	-

Complete

-
-

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

13800 View breakup
-

Clause No.	Exclusion	Remark
4(Conductor As per IS:8783(Pt 1):1995])	-	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	-
4.1, table 1 & 2(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	-
4.1, table 1 & 3(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	-
4.2(Insulation (As per Cl.4.2 of IS 8783(Part4/Sec 3): 1995)	-	-
4.3(Insulation (As per Cl.4.3 of IS 8783(Part4/Sec 3): 1995)	-	-
4.4(Insulation (As per Cl.4.4 of IS 8783(Part4/Sec 3): 1995)	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4.1(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4.1(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	-
4.5((Cl.4.5 of IS 8783 (Part 4/Sec 3) : 1995))	-	-

Complete

-
-

IS 7538 (1996)

Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision)

4150 View breakup
-

Clause No.	Exclusion	Remark
5(ENCLOSURES)	-	-
8.1(Rated Voltage)	-	-
8.2(Rated Frequency)	-	-
8.3(Rated Outputs)	-	-
9(DIMENSIONS- H : Nominal )	-	-
9(DIMENSIONS- H : Deviation )	-	-
9(DIMENSIONS- A)	-	-
9(DIMENSIONS- B)	-	-
9(DIMENSIONS- C)	-	-
9(DIMENSIONS- K+ : Nominal )	-	-
9(DIMENSIONS- K+ : Tolerance )	-	-
9(DIMENSIONS- Bolt or Screw)	-	-
9(DIMENSIONS- M)	-	-
9(DIMENSIONS- N)	-	-
9(DIMENSIONS- P)	-	-
9(DIMENSIONS- S)	-	-
9(DIMENSIONS- T)	-	-
9(DIMENSIONS- LA)	-	-
9(DIMENSIONS- Depth of tapped Hole)	-	-
11(PROVISION FOR EARTHING)	-	-
12.1, Table 1 to Table 6(Minimum full load speed)	-	-
12.1, Table 1 to Table 6(maximum full load current)	-	-
12.1, Table 1 to Table 6(minimum starting torque/ breakaway torque )	-	-
12.1, Table 1 to Table 6(nominal efficiency)	-	-
12.1, Table 1 to Table 6(nominal efficiency at 75% rated load)	-	-
13.1(OVERLOAD:Momentary Excess Torque)	-	-
14(LIMITS OF TEMPERATURES AND TEMPERATURE-RISE)	-	-
15(LIMITS OF VIBRATION SEVERITY)	-	-
16(LIMITS OF NOISE LEVELS)	-	-
17.1(Efficiency)	-	-
17.2(Power Factor)	-	-
18(TOLERANCES)	-	-
19.1(TERMINAL BOX)	-	-
19.1.1(TERMINAL MARKINGS)	-	-
22.3.1 b)(Measurement of stator resistance)	-	-
23.1(TEMPERATURE-RISE TEST : Test at Rated Voltage)	-	-
23.2(TEMPERATURE-RISE TEST: Test at Reduced Voltage)	-	-
24.1(No-load running of motor and reading of ' voltage)	-	-
24.1(No-load running of motor and reading of ' current )	-	-
24.1(No-load running of motor and reading of ' power input )	-	-
24.1(No-load running of motor and reading of ' speed )	-	-
24.3(Locked Rotor Test:The readings of the breakaway rotor torque)	-	-
24.4(Full Load Test : voltage)	-	-
24.4(Full Load Test : Power input )	-	-
24.4(Full Load Test : current )	-	-
24.4(Full Load Test : speed)	-	-
24.5(Test for efficiency at reduced load)	-	-
25(HIGH-VOLTAGE TEST)	-	-
26(INSULATION-RESISTANCE TEST)	-	-
27(OVERSPEED TEST)	-	-
24.3(Locked Rotor Test:The readings of the input current)	-	-
24.3(Locked Rotor Test:The readings of the input power)	-	-

Complete

-
-

IS 12225 (1997)

Centrifugal jet pump - Specification (First Revision)

6200 View breakup
-

Clause No.	Exclusion	Remark
8.1( PERFORMANCE CHARACTERISTICS Factor Affecting Performance)	-	-
8.2( PERFORMANCE CHARACTERISTICS Performance Curves)	-	-
9 table 2(testing )	-	-
9.3(Pressure Testing)	-	-
10(TOLERANCES)	-	-
4.1(Twin type)	-	-
4.2(Duplex type)	-	-
4.3(Packer type)	-	-
5.2(Prime Movers)	-	-
5.2.1(Motor Drives)	-	-
5.2.1(Measurement of stator resistance)	-	-
5.2.1(High Voltage test)	-	-
5.2.1(Insulation Resistance test)	-	-
5.2.1(No load test at rated voltage)	-	-
5.2.1(Locked rotor)	-	-
5.2.1(Breakaway (starting) torque)	-	-
5.2.1(Reduced voltage running up test at no load)	-	-
5.2.1(Temperature rise test at rated voltage)	-	-
5.2.1(Temperature rise test at reduced voltage)	-	-
6(Material of Construction)	-	-
12(Marking)	-	-
12.1(a)(DLWL)	-	-
12.1(b)(Discharge)	-	-
12.1(c)(Submergence)	-	-
12.1(d) i(Pipe sizes - For Duplex/Packer type)	-	-
12.1(d) ii(Pipe sizes - For Twin type)	-	-
12.1(e)(DLWL-Range)	-	-
12.1(f)(Total Head)	-	-
12.1(g)(Rated Speed)	-	-
12.1(i)(Maximum Current)	-	-

Complete

-
-

IS 8418 (1999)

Pumps - Centrifugal self priming - Specification (First Revision)

7600 View breakup
-

Clause No.	Exclusion	Remark
7.0(DIRECTION OF ROTATION)	-	-
12.2(Performance Test Verification of guarante Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	-
12.2(Performance Test Verification of guarante Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	-
12.3(Primimg Test)	-	-
17.1(Marking)	-	-

Complete

-
-

IS 13730 : Part 45 (1999)

Specifications for particular types of winding wires: Part 45 polyester enamelled round copper wire, class 130

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	11500	-
4(Dimension - Conductor diameter)	-	0	-
1(Dimension - Overall Diameter)	-	0	-
4(Dimension - Out of roundness)	-	0	-
4(Dimension - Out of roundness)	-	0	-
4(Dimension - Minimum increase in diameter)	-	0	-
5(Electrical Resistance)	-	0	-
6(Elongation Test)	-	0	-
7(Springiness Test)	-	0	-
8(Flexibility and adherence - Mandrel winding test)	-	0	-
8(Flexibility and adherence - Jerk Test)	-	0	-
8(Flexibility and adherence - Peel Test)	-	0	-
8(Flexibility and adherence - Stretching Test)	-	0	-
9(Heat Shock Test)	-	0	-
10(Cut through Test)	-	0	-
11(Resistance to abrasion)	-	0	-
12(Resistance to solvents)	-	0	-
13(Breakdown voltage test)	-	0	-
14(Continuity of Insulation)	-	0	-
15(Temperature Index)	-	85000	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Scientific and Industrial Testing And Research Centre

83 & 84 Avarampalayam Road, K.R.Puram (P.O.), Coimbatore - 641006, COIMBATORE, Coimbatore, Tamil Nadu, 641006

6369793937 [email protected]

Scope List