BIS - LIMS (Laboratory Information Management System)

CIPET KOCHI

( Formerly Known as Centre for Biopolymer Science & Technology ), 196 A, HIL Colony, Pathalam, Edayar Road,Eloor, Udyogamandal.P.O., Kochi, KOCHI, Ernakulam, Kerala, 683501

8129497182 [email protected]

Scope List

Reset

28 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

20168.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	All Dimension
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Visual Appearance
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	Opacity
10.3(Effect on Water Test)	-	3000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	Reversion(Including Specimen Preparation charges)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	VST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.7(Sulphated Ash Content)	-	850	Sulphated Ash Content
10.1(Colour)	-	0	The amount is included in Visual appearance (10.1.1)
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	Type Test
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Acceptance Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	Type Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Acceptance Test
11.2(Resistance to External Blows at 0°C)	-	1300	Resistance to External Blows at 0°C(Including Specimen preparation charges)

Complete

-
-

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

16850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	250	-
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	100	-
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	100	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	100	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	100	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	100	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1300	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1700	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	-

Complete

-
-

IS 15354 (2003)

Single-Use Rubber Examination Gloves

- View breakup
Rs.5,950/-; Rs.5000/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 04/09/2018; Size: 70-120 mm; Scope restricted to Gloves not requiring ‘Sterility’ test as per cl.6.4. 25% discount to BIS (except for preparation/conditioning of samples)

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.9250/- (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
100 ml-5l, 25% discount (except for preparation/conditioning of samples) to BIS

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.14,000/-; Rs.500/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 04/09/2018. 25% discount to BIS (except for preparation/conditioning of samples)

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

- View breakup
Rs.23,500/-; Rs.6,800/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 04/09/2018

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin)(25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

- View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

- View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2(diameter of the socket of cap)	-	-		-
2.2.2(diameter of the socket of cap)	-	-		-

Complete

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

32444 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	19175	QUICK COUPLED PIPES(Part 1Cl4.2,5.0,6.1,7.1,7.2,7.3,7.4,7.5,7.6)
4(QUICK COUPLED FITTINGS)	-	6950	QUICK COUPLED FITTINGS-Density, MFI,CBC & CBD for male & female coupler)
4.1 .3(Workmanship and Appearance)	-	300	Workmanship and Appearance
4.1.4(b)(Holding Attachments for Coupler Parts)	-	850	Holding Attachments for Coupler Parts
4.1.5(Rubber Ring)	-	7150	Rubber Ring
6.1.1, 6.1.1.1(Leakage Test)	-	850	Leakage Test
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	Hydraulic Proof Test
6.1.3.1.1(Weldability Test)	-	6400	Weldability Test

Complete

-
-

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

9462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Size code)	-	500	Length & Width
6.1 & Table 2(Minimum thickness (at locations shown in Figure 2))	-	250	Thickness
6.2(Watertightness)	-	1300	Water Tightness
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	1350	Tensile strength & Elongation at break(before ageing)
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	5550	Accelerated ageing,Tensile strength & Elongation at break(after ageing)

Complete

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

14500 View breakup
Rs.18625/-; Rs.550/- for specimen/conditioning; Rs.3225/- for raw material; Rs.625/- for specimen/ conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1600	CBC & CBD
5.1 table -1(DIMENSIONS OF PIPES)	-	500	DIMENSIONS OF PIPES
6.1(VISUAL APPEARANCE)	-	300	VISUAL APPEARANCE
7.1 Table -2(Hydraulic Characteristics)	-	6400	Hydraulic Characteristics(48 hrs & 165hrs)
7.2(Reversion Test)	-	1000	Reversion Test(Including specimen Preparation)
7.3(Tensile Test)	-	1350	Tensile Test(Including specimen Preparation)
7.4table-2(Fusion Compatibility Test)	-	6400	Fusion Compatibility Test(48hrs & 165hrs)
7.5(Density)	-	500	Density
7.6(Melt now Rate (MFR))	-	1100	MFI

Complete

-
40-200 mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7387.5 View breakup
Rs.9175/-; Rs.550/- for specimen/conditioning; Rs.6075/- for raw material; Rs.625/- for specimen/ conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	3950	Identification, Toluene extract. Volatile content, MFI
4.1.c.i (Density)	-	1100	Density
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1600	CBC & CBD
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	550	Visual & dimension
7.2(Reversion Test)	-	5000	Hydraulic characteristic(1hr & 100hrs) & reversion
7.3(Elongation at Break)	-	1400	Elongation at Break(Including Specimen Preparation)
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1100	SusceptibiIity to Environmental Stress Cracking

Complete

-
12-32 mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

1443.75 View breakup
Rs.1925/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.2.2, and Fig. 2.(B)	-	500		Complete testing charge including opacity & short term hydraulic test

Complete

-
20-200mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

1443.75 View breakup
Rs.1925/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	Dimension of Socket length
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	Opacity test
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	Hydrostatic Pressure test

Complete

-
20-200mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

11425 View breakup
Rs.9,100/-; Rs.6,850/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	Maximum and minimum outside diameter of socket
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	Visual
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	Bending Test
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	Compression Test
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	Impact Test
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	Collapse Test
10(Resistance to Heat -Ball presure test)	-	700	Resistance to Heat
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	Resistance to burning
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	6800	Electrical Characteristics

Complete

-
Included w.e.f. 04/09/2018; Size: 16-25 mm. 25% discount to BIS (except for preparation/conditioning of samples)

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

13587.5 View breakup
Rs.16800/-; Rs.1250/- for specimen/conditioning; Rs.3225/- for raw material; Rs.625/- for specimen/ conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Dispersion Test)	-	1600	MFI & Density(Cl. No. 4.2.1 &4.2.2)
4.2.3(Carbon Black Content )	-	1550	CBC & CBD
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	2850	All Dimensions
6.1(Finish)	-	300	Visual
7.1.1(Resistance to Deformation)	-	700	Resistance to Deformation
7.2(Resistance to Impact)	-	1100	Resistance to Impact
7.3(Test for Top Load Resistance)	-	900	Test for Top Load Resistance
7.4(Tensile Strength)	-	1400	Tensile Strength(Including specimen preparation)
7.5(Flexural Modulus)	-	1600	Flexural Modulus(Including specimen preparation)
7.6(overall Migration)	-	2300	overall Migration(Including specimen preparation)

Complete

-
200-7500, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4219 View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	2625		Dimension of socket, opacity, stress relief , Hydraulic test
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000		Effect on water

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
Rs.5625/-; Rs.4100/- (For PVC Resin) (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	Thickness
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	Dimension
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	stress relief
Cl. 6.2(Opacity- Appendix B)	-	575	opacity
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	Effect on water
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Hydrostatic

Complete

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

20168.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	All Dimension
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Visual Appearance
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	Opacity
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	Reversion(Including Specimen Preparation charges)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	VST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Density
Clause 10.7(Sulphated Ash Content)	-	850	Sulphated Ash Content
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Acceptance Test
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	Type Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Acceptance Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	Type Test
11.2(Resistance to External Blows at 0°C)	-	1300	Resistance to External Blows at 0°C(Including Specimen preparation charges)

Complete

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

37800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	4525	MFI, Density, OIT, Volatile matter, Water Content
5.3 (a)(Carbon Black Master Batch)	-	1875	CBC, Ash Content
6.2.1(6.1.1 Identification Stripes)	-	500	Color & Identification if strip
7.4 table -3 & 4(6.1 Dimensions)	-	800	MOD, Ovality, thickness& visual Appearance
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	Hydraulic Characteristic(100hrs,48hrs,165hrs & 1000hrs)
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Internal Pressure Creep Rupture Test of Pipe Joints(48hrs)
8.2(Longitudinal Reversion Test)	-	900	Longitudinal Reversion Test(Including specimen Preparation)
8.3(Carbon black)	-	1625	CBC & CBD
8.4( Melt Flow Rate)	-	1100	MFI
8.5 (Oxidation Induction Time)	-	2200	OIT
8.6(Overall migration)	-	2000	Overall migration(Including Specimen Preparation)
8.7(Density)	-	500	Density
8.8(Tensile Strength for Butt-fusion)	-	1600	Tensile Strength for Butt-fusion(Including Specimen preparation)
8.9 table-6(Elongation at Break)	-	1600	Elongation at Break(Including Specimen preparation)
8.1(Slow Crack Growth Rate)	-	6000	Slow Crack Growth Rate(Including Specimen preparation)

Complete

-
-

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

12175 View breakup
Rs.5,900/-; Rs.7,750/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	500	Dimensions Fig 1 and Table 1
4.3(Thickness)	-	250	Thickness
4.4.1(Physical Properties)	-	1350	Tensile test (Including specimen preparation)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	7350	After accelerated aging at 70 + 1OC for 240 h(Including specimen preparation)
4.4.3(After heat ageing in autoclave)	-	2350	After heat ageing in autoclave(Including specimen preparation)
4.4.4(Tension Set)	-	1500	Tension Set
4.5(pH of Aqueous Extract )	-	350	pH of Aqueous Extract

Complete

-
Included w.e.f. 04/09/2018; Size: 5-1/2 to 9-1/2. 25% discount to BIS (except for preparation/conditioning of samples)

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

11077 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Thickness - Annexure E)	-	300	Thickness
7.3(Dimensional Requirements - Squareness - Annexure D)	-	1000	Length, Width, Squareness, Edge straightness
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	Dimensional Changes caused by humidity
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2600	Resistance to water(Including Specimen Preparation)
9.2.3(Adhesion of Plies - Annexure H)	-	250	Adhesion of Plies
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2000	Mycological Test
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1600	Modulus of rupture (Including Specimen Preparation)
9.2.6(Spot test - Annexure L)	-	3000	Spot test

Complete

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

23750 View breakup
Rs.22,600/-; Rs.6,800/- for specimen/conditioning (25% discount to BIS (except for preparation/conditioning of samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	1250	Length, Width, thickness, edge straightness & sqaureness
7.1(WORKMANSHIP AND FINISH )	-	2050	WORKMANSHIP AND FINISH
9.1.1(MOISTURE CONTENT)	-	900	MOISTURE CONTENT
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	Glue Adhesion in Dry State(including Specimen preparation )
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	250	Glue Adhesion in Dry State
9.1.3 , 9.1.3.1.1(Water resistance test)	-	3650	Water resistance test(including Specimen preparation )
9.1.4(Tensile strength)	-	3200	Tensile strength(including Specimen preparation )
9.1.5(Mycological test)	-	6850	Mycological test(including Specimen preparation )
9.1.6 (Table 3)(Static bending strength)	-	3200	Static bending strength dry state(including Specimen preparation )
9.1.7 (Table 4)(Wet bending strength)	-	3200	Wet bending strength(including Specimen preparation )
9.1.8(Retention of preservative)	-	3500	Retention of preservative(including Specimen preparation )

Complete

-
Included w.e.f. 04/09/2018 Thickness: 12 mm to 19 mm

IS 303 (1989)

Plywood for General Purposes -

13287.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	Visual Appearance, length & width
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	Thickness
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	Squareness & edge Straightness
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2600	Water resistance test (Including Specimen preparation)
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	5000	Mycological test
11.3(Moisture Content - Part 1 of IS 1734)	-	900	Moisture Content
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	6400	Static Bending Strength - MOE& MOR (Along Face Grain & Across face grain

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET KOCHI

( Formerly Known as Centre for Biopolymer Science & Technology ), 196 A, HIL Colony, Pathalam, Edayar Road,Eloor, Udyogamandal.P.O., Kochi, KOCHI, Ernakulam, Kerala, 683501

8129497182 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found