BIS - LIMS (Laboratory Information Management System)

ACE TEST HOUSE

khasra No 1048 Near Pepsi Godown, vill- Bhalswa, New Delhi, North West, Delhi, 110033

7042858881 [email protected]

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade-1/Grade-2

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	1000	15% Discount to BIS
8.2(Physical requirments-Dimensions-Length)	-	1000	15% Discount to BIS
8.2(Physical requirments-Dimensions-Height)	-	1000	15% Discount to BIS
8.2(Physical requirments-Dimensions-Width)	-	1000	15% Discount to BIS
8.3(Physical requirments- Block density)	-	3000	15% Discount to BIS
8.4(Physical requirments- Compressive strength)	-	6500	15% Discount to BIS
8.5(Thermal Conductivity)	-	15000	15% Discount to BIS
8.6( Drying Shrinkage )	-	6500	15% Discount to BIS

Complete

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	1000	20% discount to BIS
7 Table-3 ii a(Expansion by Le Chatelier)	-	600	20% discount to BIS
7 Table-3 ii b(Expansion by Autoclave)	-	1200	20% discount to BIS
7 Table-3 iii a(Setting Time Initial)	-	600	20% discount to BIS
7 Table-3 iii b(Setting Time Final)	-	600	20% discount to BIS
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	20% discount to BIS
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	20% discount to BIS
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	20% discount to BIS
6.1 Table-2 vi(Loss on ignition)	-	500	20% discount to BIS
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	3000	20% discount to BIS
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	1000	20% discount to BIS
6.1 Table-2 iii.(Insoluble residue)	-	1000	20% discount to BIS
6.1 Table-2 iv(Magnesia)	-	1000	20% discount to BIS
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	20% discount to BIS
6.1 Table-2 vii(Chloride content)	-	1500	20% discount to BIS
6.1 Table-2 viii(Alkali content)	-	1500	20% discount to BIS

Complete

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

M-30,M-35,M-40,M-50,M-55

21300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	200	NA
6.1.3(Physical requirement)	-	200	NA
6.1.4(Physical requirement)	-	200	NA
6.2.1 & 7.1(VISUAL INSPECTION)	-	500	NA
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	500	NA
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	NA
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	500	NA
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	NA
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	500	NA
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	NA
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	500	NA
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	NA
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	NA
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	NA
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	NA
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	NA
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	300	NA
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	NA
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	1500	NA
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	NA
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	500	NA
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	100	NA
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	100	NA
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1800	NA
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens))	-	100	NA
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	1800	NA
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	3500	NA
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	3500	NA
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	1500	NA
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	100	NA
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	1500	NA
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	100	NA
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	0	NA
Annex-G-7(AVERAGE BREAKING LOAD)	-	0	NA
Clause 7.1.1 (General Quality)	-	0	NA
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	NA
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	0	-
Clause 7.1.3 (Colour and Texture)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
6.2.2, Table 4(Higher Width)	-	0	-
6.2.2, Table 4(Lower Width)	-	0	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

ACE TEST HOUSE

khasra No 1048 Near Pepsi Godown, vill- Bhalswa, New Delhi, North West, Delhi, 110033

7042858881 [email protected]

Scope List