BIS - LIMS (Laboratory Information Management System)

Advance Firetec and Research Lab Pvt. Ltd.

B-3, Mangolpuri, Industrial Area Phase II, NEW DELHI, North West, Delhi, 110034

9971032375 [email protected]

Scope List

Reset

28 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 5612 : Part 2 (1977)

Specification for hose - Clamps and hose - Bandages for fire brigade use: Part 2 hose - Bandages (First Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 4989 : Part 4 (2003)

Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification

- View breakup
(Provisional testing charges): Rs.57,600/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 15381 (2021)

Fire Blanket - Specification ( First Revision )

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1( Construction)	-	500	NA
4.2(Hand Holding Device)	-	500	NA
4.3(Shape & Dimension)	-	800	NA
4.4(Mass)	-	500	NA
4.5(Deformation)	-	500	NA
4.6(Force and Time for removing & unfolding)	-	800	NA
5(Electrical Resistance)	-	3500	NA
6.1 & 6.2(Fire Performance)	-	12900	Rs 8000.00 (Cooking Oil) + Rs 4900.00 (Hydrocarbon Fuel)
6.3(Temperature Resistance)	-	3500	NA
7(Workmanship and Finish)	-	500	NA
9,9.1 &9.2(Marking)	-	500	NA

Complete

-
-

IS 952 (2012)

Fog nozzle for fire brigade use - Specification (Second Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 908 (1975)

Specification for fire hydrant, stand post type (Second Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 8090 (1976)

Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 2 (materials)

IS 905 (1980)

Specification for delivery breechings, dividing and collecting, instantaneous pattern, for fire fighting purposes (Second Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 910 (1980)

Specification for combined key for hydrant, hydrant cover and lower valve (Second Revision)

- View breakup
(Provisional testing charges): Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 927 (1981)

Specification for fire hooks (Second Revision)

- View breakup
(Provisional testing charges): Rs.8,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 5714 (1981)

Specification for hydrant stand - Pipe for fire fighting (First Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 to 3.5 (materials)

IS 904 (1983)

Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 2 (materials)

IS 4861 (1984)

Specification for Dry Powder for Fighting Fires in Burning Metals

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.20,000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except fire test on radioactive materials

IS 926 (1985)

Specification For Fireman's Axe

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 901 (1988)

Specification for couplings, double male and double female instantaneous pattern for fire fighting (Third Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 2 (materials)

IS 906 (1988)

Specification for revolving branch pipe for fire fighting (Third Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 902 (1992)

Suction hose couplings for fire fighting purposes - Specification (Third Revision)

- View breakup
(Provisional testing charges): Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Except clause 3 (materials)

IS 909 (1992)

Underground fire hydrant, sluice valve type - Specification (Third Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 4927 (1992)

Unlined flax canvas hose for fire fighting - Specification (First Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.20,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 8096 (1992)

Fire beaters - Specification (First Revision)

All size

- View breakup
(Provisional testing charges): Rs.10,000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 14609 (1999)

Dry chemical powder for fighting a,b,c, class fires specification

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.25,200/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

All sizes

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Finish and workmanship)	-	4000	NA
4(Marking)	-	2000	NA
5(Delivery hose coupling)	-	4000	NA
5.3(Size and Dimension )	-	4000	NA
5.4(Hydraulic test requirement)	-	6000	NA
6(Branch pipe)	-	4000	NA
6.3(Hydraulic test requirement)	-	6000	NA
7(Nozzle)	-	4000	NA
7.3(Hydraulic test requirement)	-	6000	Test for nozzle spanner are carried out and present in NABL Scope Sl No. 263, 268.

Complete

-
-

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

All Types and Capacities

302300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	600	NA
Cl. 5.3.2(Filling Requirements)	-	600	NA
Cl. 5.3.3(Capacities)	-	600	NA
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1000	NA
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1000	NA
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	NA
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	NA
Cl. 7.3(Resistance to Temperature changes)	-	2200	NA
Cl 7.4.3( Leakage Test)	-	600	NA
Cl 7.5.1(Impact Resistance Test)	-	600	NA
Cl 7.5.2(Vibration Resistance Test)	-	1200	NA
Cl 7.6(Resistance to Corrosion)	-	12000	External & Internal
Cl 7.7(Tapping Test)	-	1200	NA
Cl 7.8(Intermittent Discharge Test)	-	600	NA
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	850000	1A – 14000, 2A – 16000, 3A – 18000, 4A – 27000, 6A – 32000, 10A – 37000,15A – 51000, 20A – 73000.21B- 10000, 34B- 15000, 55B – 37000 70 B – 42000, 89B – 52000, 133B – 57000 144B – 67000, 183B – 75000, 233B – 85000 D–10000,
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	30000	5F –5000, 15F –10000 25F–15000, 75F -25000 Composite cylinder - 5000
Cl 9(CONSTRUCTION REQUIREMENTS)	-	1800	NA
Cl 9.2.2(Burst Test)	-	4400	NA
Cl 9.2.3(Crushing Test)	-	1200	NA
Cl 9.2.4(Pressure Cycling Test)	-	1200	NA
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	600	NA
Cl 9.2.6(Stainless Steel Cylinders)	-	600	NA
Cl 9.2.7(Aluminium Cylinders)	-	600	NA
Cl 9.3(Carrying Handle)	-	600	NA
Cl 9.4(Mounting)	-	600	NA
Cl 9.5(Caps, Valves and Closures)	-	2800	NA
Cl 9.7.1(Requirements for Plastics Components)	-	2000	NA
Cl 9.7.2(Requirements for Plastics Components)	-	1000	NA
Cl 9.7.3(Requirements for Plastics Components)	-	2000	NA
Cl 9.8(Hose Assemblies)	-	1500	NA
Cl 9.9 - Table 10(Method of Operation)	-	1200	NA
Cl 9.10(Safety-Locking Devices)	-	1200	NA
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	200	NA
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	2500	NA
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	1000	NA
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	1300	NA
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	1200	NA
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	600	NA
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	2400	MAP-2400 BC- 1200 ST-1200
Cl 10(MARKING AND COLOUR)	-	500	All test facilities available except carbon content.
Cl. 5.3.2(Filling Requirements)	-	600	-
7.4.1.(Retention of charge following partial discharge)	-	600	-
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	6000	-
9.6(Safety Device)	-	300	-
9.2.8(Composite Cylinder)	-	5000	-
9.14.1(Content of Mono Ammonium Phosphate)	-	2400	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	1200	-
9.14.3(Surface Tension of Foam Solution)	-	1200	-

Complete

-
-

IS 8442 (2008)

Stand post type water and foam monitor for fire fighting - Specification (First Revision)

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4, Table-2(Carbon)	-	25000		Relevant test of IS 8442:2008 is covered in NABL scope S.No. 488 to 496 and S.No. 127 to 130.

Complete

-
-

IS 5290 (1993)

Landing valves - Specification (Third Revision)

Type A and Type B

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 (a) fig-1, type A(Types AND DIMENSIONS)	-	5000	NA
5, 5.1 (b) fig-2, type B(Types AND DIMENSIONS)	-	5000	NA
6, 6.1(Finish)	-	500	NA
6, 6.2(Finish)	-	500	NA
7, 7.1(7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-	2000	NA
7, 7.2(hydrostatics pressure tests)	-	2000	NA
7, 7.3(Flow test, pressure 7 kgf/cm2)	-	6000	NA

Complete

-
-

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

All types of foam

116000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	AFFF - 69,200 PF - 66,800 FP - 66,800 FFFP - 69,200 SF - 6800 AR-AFFF - 1,16,000 AR-FFFP - 1,16,000 AR-FP -1,13,600
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	599.98	NA
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	NA
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	300	NA
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	Specific Gravity for both Original and Ageing - Rs 600
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	Expansion - Rs 1200 25% - Rs 1200
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	Fire Test on Polar solvent (Fresh Water) - Rs 30000 Fire Test on Polar Solvent (Salt Water) - Rs 30000 Fire Test on Non Polar Solvent (Fresh Water) - Rs 24000 Fire Test on Non Polar Solvent (Salt Water) - Rs 2400 expansion Rs 1200

Complete

-
-

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

All

6000 View breakup
Rs.6000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3(Carbon)	-	6000		Relevant Tests of the Standard are included in Sl.No. 298 to 307 of NABL Scope.

Complete

-
-

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

Type A & Type B

15000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	1000.00	NA
Cl 5.2(Resistance to Leakage)	-	2000.00	NA
Cl 5.3(Strength)	-	2000.00	NA
Cl 5.3(Strength)	-	2000.00	NA
Cl 5.4(Range & Water Flow Rate)	-	4000.00	NA
Cl 5.5(Swinging)	-	2000.00	NA
Cl 5.6(Reel Action)	-	1000.00	NA
Cl 6(Workmanship)	-	500.00	NA
Cl 7(Painting)	-	500.00	NA

Complete

-
-

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

Type 1,2 &3

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free from pitting and other imperfections)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl 6.1.2(Externally applied elastomeric coating or covering of the reinforcement, if present shall be generally smooth and practically free from pitting and other imperfections)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl 6.1.3(The jacket shall be practically free from dirt, knots, lumps, irregularities of the yarn and other visible defects.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	3000	Type 1 - Rs 3000 Type 2 - Rs 3000 Type 3 - Rs 3000
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	4000	Type 1 - Rs 4000 Type 2 - Rs 4000 Type 3 - Rs 4000
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	500	Type 1 - Rs 500 Type 2 - Rs 500 Type 3 - Rs 500
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	1000	Type 1 - NA Type 2 - NA Type 3 - Rs 1000
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	1000	Type 1 - NA Type 2 - NA Type 3 - Rs 500
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	3000	Type 1 - Rs 3000 Type 2 - Rs 3000 Type 3 - Rs 3000
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	1000	Type 1 - NA Type 2 - Rs 1000 Type 3 - Rs 1000
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	2000	Type 1 - NA Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.15 (1)(The length shall be laid horizontally and the central fully immersed portion of the hose shall be visually examined for any swelling of rubber, weathering and cracking in the rubber lining)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	2000	Type 1 - Rs 2000 Type 2 - Rs 2000 Type 3 - Rs 2000
Cl.6.16(When tested by the method prescribed in IS 443 (Part 1), the lining (for Types 1, 2 and 3) and cover (for Type 3 only) of the hose shall neither develop cracking nor crazing when seen under X2 magnification, except at the cut edges of the hose)	-	25000	Type 1 - Rs 12500 Type 2 - Rs 12500 Type 3 - Rs 25000
Cl.6.17(When tested in accordance with Annex F, at a test temperature of, at a test temperature of 300 ± 10°C for Types 1 and 2, and 400 ± 10° C for Type 3, in none of the four tests shall the test piece show signs of leakage within 120 s from the application of the filament rod or on removal of this filament rod after the specified period)	-	10000	Type 1 - Rs 10000 Type 2 - Rs 10000 Type 3 - Rs 10000
Cl.6.18(When tested in accordance with Annex H, the pressure loss per 23 m length shall not exceed the values specified in Table 3 at the specified flow rate and inlet pressure (Recommendations for pressure testing of hoses in service are given at Annex G).)	-	4000	Type 1 - Rs 4000 Type 2 - Rs 4000 Type 3 - Rs 4000

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Advance Firetec and Research Lab Pvt. Ltd.

B-3, Mangolpuri, Industrial Area Phase II, NEW DELHI, North West, Delhi, 110034

9971032375 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found