BIS - LIMS (Laboratory Information Management System)

Kailtech Test and Research Centre Pvt. Ltd.

141C, Electronic Complex Industrial Area, Indore, Indore, Madhya Pradesh, 452010

- [email protected]

Scope List

Reset

114 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

- View breakup
Rs.7500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

18 Dec, 2021

-
-

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	3000	Tensile
Cl 9(Press)	-	1000	Bend
Cl 11(Workmanship)	-	500	Freedom From Defects
Cl 12(Length, Width & Thickness)	-	500	Dimesions
Cl 13(Workmanship)	-	500	Freedom from Defects
Cl. 12(Weight)	-	500	Weight
Cl. 12(Edge Camber)	-	500	Dimension
Cl. 12(Thickness)	-	500	Dimension
Cl. 8.2 Table 3(Elongation)	-	3000	Elonagtion
Cl. 8.2 Table 3(Yield Stress)	-	3000	Yield

Complete

18 Dec, 2021

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 & 7.1(VISUAL INSPECTION)	-	500	Visual
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	3000	All Dimensions
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	3000	All Dimensions
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	3000	All Dimensions
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	3000	All Dimensions
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	3000	All Dimensions
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	3000	All Dimensions
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	3000	All Dimensions
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	3000	All Dimensions
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	3000	All Dimensions
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	3000	All Dimensions
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	3000	All Dimensions
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	3000	All Dimensions
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	3000	All Dimensions
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	3000	All Dimensions
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	3000	All Dimensions
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	3000	All Dimensions
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	3000	All Dimensions
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	3000	All Dimensions
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	3000	Water Absorption
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	5000	Compressive Strength
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	5000	Compressive Strength
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	5000	Abrasion Resistance
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	5000	Abrasion Resistance
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	5000	Tensile Splitting
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	5000	Tensile Splitting
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	5000	Flexural
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	5000	Flexural
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	5000	Flexural
Annex-G-7(AVERAGE BREAKING LOAD)	-	5000	Flexural
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	5000	Tensile Splitting
6.1.2(Physical requirement)	-	500	-

Complete

18 Dec, 2021

-
-

IS 4457 (2007)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

All

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5, Table 1 - iv -a (Resistance to Chemicals - Annex F)	-	10000	Resistance to Chemicals
Cl. 5, Table 1 - iv -b (Resistance to conc. HNO3 and conc. H2SO4 - Annex G)	-	10000	Resistance to conc. HNO3 and conc. H2SO4
4.1(DIMENSIONS AND TOLERANCES- Size)	-	10000	All Dimensions
4.2(DIMENSIONS AND TOLERANCES- Thickness)	-	10000	All Dimensions
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Length)	-	11000	All Dimensions and Surface Quality
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Width)	-	11000	All Dimensions and Surface Quality
5-Table 1(i)-b(REQUIREMENTS-Dimensions and Surface Quality-Thickness)	-	11000	All Dimensions and Surface Quality
5-Table 1(i)-c(REQUIREMENTS-Dimensions and Surface Quality-Straightness of sided)	-	11000	All Dimensions
5-Table 1(i)-d(REQUIREMENTS-Dimensions and Surface Quality-Rectangularity)	-	10000	All Dimensions
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Centre curvature)	-	11000	All Dimensions and Surface Quality
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Edge curvature)	-	11000	All Dimensions and Surface Quality
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Warpage)	-	11000	All Dimensions and Surface Quality
5-Table 1(ii)(REQUIREMENTS-Surface Quality)	-	1000	Surface Quality
5-Table 1(iii)(REQUIREMENTS-Physical Properties-Water absorption by weigh(Average))	-	10000	Water Absorption
5-Table 1(iii)-a(REQUIREMENTS-Physical Properties-Water absorption by weigh(Indivisual))	-	10000	Water Absorption
5-Table 1(iii)-b-1(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness>=7.5mm))	-	15000	Modulus of Rupture and Breaking Strength
5-Table 1(iii)b-2(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness <7.5mm))	-	15000	Modulus of Rupture and Breaking Strength
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Average))	-	15000	Modulus of Rupture and Breaking Strength
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Individual))	-	15000	Modulus of Rupture and Breaking Strength
5-Table 1(iii)-d(REQUIREMENTS-Physical Properties-Abrusion resistance)	-	5000	Abrasion

Complete

18 Dec, 2021

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

52500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	3000	-
10.1(Power input)	-	3000	-
10.2(Current input)	-	3000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	6000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	5000	-
13.3(Electric Strength at operating temperature)	-	6000	-
14(Transient Over Voltages)	-	8000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	10000	-
15.2(Spillage Test)	-	3000	-
15.3(Humidity Test)	-	5000	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	5000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	6000	-
17(Over Load Protection of Transformers and associated circuits)	-	6000	-
18(Endurance Test requirements and tests)	-	1000	-
19(Abnormal Operation)	-	8000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	5000	-
22(Construction verification related test)	-	8000	-
23(General)	-	2500	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	7000	-
26(Terminals for external conductors)	-	3000	-
27(Provision for earthing)	-	3000	-
28(Screw test and connections)	-	5000	-
29(clearance, creepage distances and solid insulation)	-	9000	-
30.1(Ball pressure test)	-	3000	-
30.2(Glow Wire Test)	-	3000	-
30.2(Needle Flame Test)	-	3000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation Toxicity and Similar Hazards)	-	2000	-

Complete

18 Dec, 2021

-
-

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	3000	Tensile
Cl 8(Press)	-	1000	Bend
Cl 9(Strainage Embrittlement)	-	5000	Strainage Embrrittlement
Cl 10(Erichsen Cupping)	-	3000	Cupping
Cl 13(Length, Width & Thickness)	-	1000	Dimension
6.1(Carbon %)	-	500	Carbon
6.1(Manganese %)	-	500	Manganese
6.1(Phosphorus %)	-	500	Phosphorous
6.1(Sulphur %)	-	500	Sulphur
6.1(Silicon %)	-	500	Silicon
6.1( Aluminium %)	-	500	Aluminium
6.1(Nitrogen%)	-	1500	Nitrogen
Cl. 13(Out of square)	-	1000	Dimension
Cl. 13(Flatness)	-	1000	Dimension
Cl. 13(Camber)	-	1000	Dimension
Cl. 13(Width)	-	1000	Dimension
Cl. 13(Thickness)	-	1000	Dimension
Cl. 12(Freedom from defects)	-	1000	Freedom from Defect
Cl. 7.2 Table 3(Elongation)	-	3000	Elongation
Cl. 7.2 Table 3(Yield Stress)	-	3000	Elongation

Complete

18 Dec, 2021

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1500	OK
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	OK
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1500	OK
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1000	OK
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1500	OK
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	5000	OK
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	5000	OK
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	5000	OK
8.2.1(Unregu/Qt~d Emining Pipe)	-	5000	OK
8.2.2(Regulated Emitting Pipes)	-	5000	OK
8.3.1(Wall Thickness ofEmitting Pipe)	-	1000	OK
8.3.2(Inside Diameter ofEmitting Pipe)	-	1000	OK
8.3.3(Flow Paths in Emitting Unit)	-	1000	OK
8.3.4(Spacing ofEmitter Units)	-	1000	OK
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	5000	OK
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	5000	OK
8.5(Resistance to Tension at Elevated Temperature)	-	5000	OK
8.5(Resistance to Tension at Elevated Temperature)	-	5000	OK
8.5(Resistance to Tension at Elevated Temperature)	-	5000	OK
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	2000	OK
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	5000	OK
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	5000	OK
8.8(Determination of Emitting Unit Exponent)	-	3000	OK

Complete

18 Dec, 2021

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Dimensions Of Pipes)	-	3000	ok
Cl 8(Visual Appearance)	-	500	ok
Cl 9.1(Hydraulic Characteristics)	-	15000	ok
Cl 9.2(Fusion Compatibility)	-	2000	ok
Cl 9.3(Reversion Test )	-	5000	ok
Cl 9.4 & Annex B(Impact Strength)	-	5000	ok
Cl 9.5(Density)	-	1000	ok
Cl 9.6(Melt Flow Rate)	-	2000	ok
Cl 9.7(Carbon Black Content & Dispersion)	-	2000	ok
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	125000	ok
Cl 9.9(Opacity)	-	2000	ok

Complete

18 Dec, 2021

-
-

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table-1(Sizes Diameter of Line wire)	-	1000	Dimension
5 Table-1(Sizes Diamater of Point wire)	-	1000	Dimension
5 Table-1(Sizes Mass of Completed barbed wire)	-	1000	Mass
5 Table-1(Sizes Distance between two barbs)	-	1000	Dimension
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	1000	Dimension
9.1(Freedom from defects)	-	1000	Freedom from Defects
12.1(Tensile Strength)	-	1500	Tensile Test
12.1(Breaking load)	-	1500	Breaking Load
12.3(Ductility)	-	1500	Wrapping
12.2.1(Mass of zinc coating (line wire))	-	1500	Mass of Zinc Coating
12.2.2(Mass of zinc coating (point wire))	-	1500	Uniformity of Zinc Coating
Cl. 7.1(General)	-	1000	General
Cl. 7.2(Finishing of Barbs)	-	1000	Finishing of Barbs
Cl. 7.2(Length of Barbs)	-	1000	Dimension
Cl. 7.2(Cut Angle)	-	1000	Dimension
4(Type A/Type B)	-	1000	Type A/Type B

Complete

18 Dec, 2021

-
-

IS 3502 (2009)

Steel chequered plates (Third Revision)

All

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	1000	Freedom from Defects
Cl 8(UTM)	-	7500	Tensile Test
Cl 9(Press)	-	1000	Bend Test
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	Dimenions
Cl. 11(Weight)	-	1000	Weight
Cl. 10(Thickness)	-	1000	Dimension
Cl. 10(Width)	-	1000	Dimension
Cl.8(Elongation)	-	7500	Elongation
Cl.8(Yield Stress)	-	7500	Yield Stress
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	Chequered Height

Complete

18 Dec, 2021

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	5000	-
2.2(SELV circuits)	-	3000	-
2.3(TNV circuits)	-	5000	-
2.4(Limited current circuits)	-	5000	-
2.5(Limited power sources .)	-	5000	-
2.6(Provisions for earthing and bonding)	-	3000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	-
2.8(Safety interlocks)	-	2000	-
2.9(Electrical insulation)	-	5000	-
2.10(Clearances, creepage distances and distances through insulation)	-	10000	-
3.1(General)	-	2000	-
3.2(Connection to a mains supply)	-	6000	-
3.3(Wiring terminals for connection of external conductors)	-	3000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	5000	-
4.3(Design and construction)	-	3000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	4000	-
4.6(Openings in enclosures)	-	3000	-
4.7(Resistance to fire)	-	5000	-
5.1(Touch current and protective conductor curren)	-	3000	-
5.2(Electric strength)	-	5000	-
5.3(Abnormal operating and fault conditions)	-	6000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	5000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	5000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	7000	-

Complete

18 Dec, 2021

-
-

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

Sockets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

18 Dec, 2021

-
-

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	10000	Tensile
Cl 9(Workmanship)	-	1000	Freedom from Defects
Cl 10(Length, Width & Thickness)	-	1000	Dimensions
6.0(MICRO ALLOYING)	-	500	Micro Alloying
6.0(ALUMINIUM)	-	100	Aluminium
6.0(SILICON)	-	500	Silicon
6.0(MANGANESE)	-	500	Manganese
6.0(PHOSPHORUS)	-	500	Phosphorous
6.0(SULPHUR)	-	500	Sulphur
6.0(CARBON)	-	500	Carbon
6.0(NITROGEN)	-	2000	Nitrogen
Cl. 10(Mass)	-	1000	Weight
Cl. 10(Out of square)	-	1000	Dimension
Cl. 10(Flatness)	-	1000	Dimension
Cl. 10(Camber)	-	1000	Dimension
Cl. 10(Width)	-	1000	Dimension
Cl. 10(Thickness)	-	1000	Dimension
Cl. 7 Table 3(Elongation)	-	10000	Elongation
Cl. 7 Table 3(Yield Stress)	-	10000	Yield

Complete

18 Dec, 2021

-
-

IS 299 (2012)

Alumino - Ferric - Specification (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1( Insouble matter, Grade 4, A-3)	-	1500	-
1 (ii) Table 1(Soluble iron compound (as Fe2+ and Fe3+), Grade 4, A-4)	-	1500	-
1 (iii) Table 1(Water soluble aluminium compounds (as Al2O3), Grade 4, A-5)	-	1500	-
1 (iv) Table 1(pH (of 5 percent aqueous solution), Grade 4, A-6)	-	1000	-
1 (v) Table 1(Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 4, A-7)	-	1500	-
1 (vi) Table 1( Lead (as Pb), Grade 4, A-8)	-	1500	-
1 (vii) Table 1(Arsenic (as As2O3), Grade 4, A-9)	-	1500	-
1 (viii) Table 1(Mercury (as Hg), Grade 4, A-10)	-	1500	-
1 (ix) Table 1(Manganese (as Mn), Grade 4, A-11)	-	1500	-
1 (x) Table 1(Chromium (as Cr), Grade 1, A-12)	-	1500	-
1 (xi) Table 1(Cadmium (as Cd), Grade 4, A-13)	-	1500	-
1 (xii) Table 1(Selenium (as Se), Grade 4, A-14)	-	1500	-
1 (xiii) (a) Table 1(Organic impurities:Phenolic compounds (as C6H5OH), Garde 4, A-15)	-	1500	-
1 (xiii) (b) Table 1(Anionic detergents (as MASS), Garde 1, A-16)	-	1500	-

Complete

18 Dec, 2021

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

All

10000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.1500/- for Chemical Tests Rs.9000/- for Physical Tests Rs.10,000/- for Complete Tests

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	750	All Dimension
Cl 12.2(Concavity & Convexity )	-	750	All Dimension
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	750	All Dimension
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	750	All Dimension
Cl 12.5(Water absorption)	-	1000	Water absorption
Cl 12.6(Wet transverse strength )	-	2000	Wet transverse strength
Cl 12.7(Resistance to wear)	-	5000	Resistance to wear
Cl 11(Suface Finish)	-	500	Surface Finish
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	750	All Dimension

Complete

18 Dec, 2021

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

All

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	Freedom from defects
Cl 10.1(Workmanship)	-	500	Macro Examination
Cl 10.2(Workmanship)	-	500	Bend
Cl 10.3(Workmanship)	-	500	Camber
Cl 11(Length, Width & Thickness)	-	500	Dimension
6.1(Carbon %)	-	500	Carbon
6.1(Manganese %)	-	500	Manganese
6.1(Phosphorus %)	-	500	Phosphorous
6.1(Sulphur %)	-	500	Sulphur
6.1(Silicon %)	-	500	Silicon
6.1( Nitrogen%)	-	500	Nitrogen
6.1( Copper %)	-	100	Copper
6.1( Aluminium %)	-	100	Aluminium
6.1( Nb)	-	100	Niobium
6.1(V)	-	100	Vanadium
6.1( Ti)	-	100	Titanium
6.1(Cr)	-	100	Chromium
6.1(Mo)	-	100	Moybdenum
6.1(Ni)	-	100	Nickle
10.1 (a)(Macro-examination)	-	500	Macro Examination
Cl. 10.2(Bend)	-	500	Dimension
Cl. 10.3(Camber)	-	500	Dimension
11(Width)	-	500	Dimension
11(Thickness)	-	500	Dimension
Cl. 10.1 (b)(Sulphur Print)	-	8000	Sulphur Print
Cl. 11.2(Out of Squareness)	-	500	Dimension

Complete

18 Dec, 2021

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

All

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9( FREEDOM FROM DEFECTS)	-	500	Freedom from Defects
10.1.a)( Macro examination IS 11371)	-	500	Macro Examination
10.1.b)( Sulphur print tests IS 12037)	-	8000	Sulphur Print
11 & 12(DIMENSIONS and Tolerances)	-	500	Dimension
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Carbon
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Manganese
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Sulphur
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Phosphorous
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Silicon
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	Aluminium
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Nitrogen
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	Copper
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	Niobium
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	Vanadium
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	Titanium

Complete

18 Dec, 2021

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

21800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	10000	-
8.0(Creepage Distance and Clearances)	-	6000	-
9.0(Provision for earthing)	-	5000	-
10.0(Terminals)	-	9000	-
11.0(External & Internal Wiring)	-	6000	-
12.0(Protection against electric shock)	-	5000	-
13.0(Endurance Tests and Thermal Tests)	-	14000	-
14.0(Resistance to Dust & Moisture)	-	15000	-
15.0(Insulation Resistance and Electric Strength)	-	10000	-
16.0(Resistance to Heat , fire and tracking)	-	12000	-

Complete

18 Dec, 2021

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	5000	-
9(Terminals)	-	8000	-
10(PROVISION FOR EARTHING)	-	3000	-
11(MOISTURE RESISTANCE)	-	9000	-
12(Electric Strength)	-	5000	-
13(Thermal endurance test for winding of ballasts)	-	1000	-
14(Fault conditions)	-	8000	-
15(Transformer heating)	-	9000	-
16(Construction)	-	6000	-
17(Creepage distance and clearances)	-	5000	-
18(Screws, current carrying parts and connections)	-	5000	-
19(Resistance to heat, fire and tracking)	-	10000	-
20(Resistance to corrosion)	-	5000	-

Complete

18 Dec, 2021

-
-

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	5000	Tensile
Cl 9 & Table 2(Workmanship)	-	2000	Mass of Zinc Coating
Cl 10(Coating Adhesion )	-	2000	Coating Adhesion
Cl 11(Workmanship)	-	500	Freedom From Defects
Cl 12(Weight)	-	500	Weight
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	1000	Dimension
4, 5(CARBON)	-	250	ok
4, 5(SULPHUR)	-	250	ok
4, 5(PHOSPHURS)	-	250	ok
4.5(MANGANESE)	-	250	ok
4, 5(NITROGEN)	-	500	ok

Complete

18 Dec, 2021

-
-

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

All

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Freedom from Defects)	-	2000	Freedom from Defects
Cl 10(Tensile Test)	-	25000	Tensile Test
Cl 11(Impact Test)	-	7500	Impact Test
Cl 13(Dimensions)	-	2000	Dimensions
Cl 16(Mass)	-	500	Mass
Clauses 7, 8.1 & .2, Table- 1(E250S, C)	-	100	Carbon
Clauses 7, 8.1 & .2, Table- 1(E250S, Mn )	-	100	Manganese
Clauses 7, 8.1 & .2, Table- 1(E250S, P)	-	100	Phosphorous
Clauses 7, 8.1 & .2, Table- 1(E250S, S)	-	100	Sulphur
Clauses 7, 8.1 & .2, Table- 1(E250S, Si)	-	100	Silicon
Clauses 7, 8.1 & .2, Table- 1(E250S, CE)	-	500	Carbon Equivalent
Clauses 7, 8.1 & .2, Table- 1(E300S, C)	-	100	Carbon
Clauses 7, 8.1 & .2, Table- 1(E300S, Mn)	-	100	Manganese
Clauses 7, 8.1 & .2, Table- 1(E300S, P)	-	100	Phosphorous
Clauses 7, 8.1 & .2, Table- 1(E300S, S)	-	100	Sulphur
Clauses 7, 8.1 & .2, Table- 1(E300S, Si)	-	100	Silicon
Clauses 7, 8.1 & .2, Table- 1(E300S, CE)	-	500	Carbon Equivalent
Clauses 7, 8.1 & .2, Table- 1(E350S, C)	-	100	Carbon
Clauses 7, 8.1 & .2, Table- 1(E350S, Mn)	-	100	Manganese
Clauses 7, 8.1 & .2, Table- 1(E350S, P)	-	100	Phosphorous
Clauses 7, 8.1 & .2, Table- 1(E350S, S)	-	100	Sulphur
Clauses 7, 8.1 & .2, Table- 1(E350S, Si)	-	100	Silicon
Clauses 7, 8.1 & .2, Table- 1(E450S, C)	-	100	Carbon
Clauses 7, 8.1 & .2, Table- 1(E450S, Mn)	-	100	Manganese
Clauses 7, 8.1 & .2, Table- 1(E450S, P)	-	100	Phosphorous
Clauses 7, 8.1 & .2, Table- 1(E450S, S)	-	100	Sulphur
Clauses 7, 8.1 & .2, Table- 1(E450S, Si)	-	100	Silicon
Clauses 7, 8.1 & .2, Table- 1(E450S, CE)	-	500	Carbon Equivalent
Clauses 7, 8.1 & .2, Table- 1(E350S, CE)	-	500	Carbon Equivalent

Complete

18 Dec, 2021

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Carbon
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Silicon
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Manganese
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Nickle
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	Chromium
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Suphur
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Phosphorous
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	Copper
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Nitrogen
6(Freedom From Defects)	-	500	Freedom from Defects
9.3(Tensile Test-1608:Part 1)	-	10000	Tensile Test
9.3, Table 3 (Yield Strength, Mpa)	-	10000	Tensile
9.3, Table 3 (Elongation, %)	-	10000	Tensile
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	2000	Cupping
12(Dimensions)	-	1000	Dimensions
14.1(Thickness,mm)	-	1000	Dimensions
14.2( Width, mm)	-	1000	Dimensions
14.3(Length, mm)	-	1000	Dimensions
14.4(Flatness, mm)	-	1000	Dimensions
14.5(Camber, mm)	-	1000	Dimensions

Complete

18 Dec, 2021

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	5000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	5000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	5000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	9000	-
14(Creepage distance and clearances)	-	5000	-

Complete

18 Dec, 2021

-
-

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

25000 View breakup
-

Complete

18 Dec, 2021

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	2000	Fineness — Specific surface
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	2000	Particles retained on 45 micron IS sieve (wet sieving)
7.1, Table 1(Soundnes)	-	2000	Soundness
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	5000	Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 )
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	1500	Silicon dioxide (SiO2 )
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	1500	Magnesium oxide
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	1500	Total sulphur as sulphur trioxide
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1500	Available alkalies as equivalent sodium oxide
5.1, 6.1, Table 1(Total chlorides)	-	5000	Total chlorides
5.1, 6.1, Table 1(Loss on ignition)	-	3000	Loss on ignition
6.2(moisture content)	-	2000	moisture content
Clauses 5.1 & 7.1 Table No. 2, SI No. (i) (Fineness- Specific surface by blaine's method)	-	2000	-
Clauses 5.1 & 7.1 Table No. 2, SI No. (ii) (Particles retained on 45 micron IS Sieve (we sieving))	-	2000	-
Clauses 5.1 & 7.1 Table No. 2, SI No. (iii) (Soundness by autoclave test - Expansion of specimen)	-	2000	-

Complete

18 Dec, 2021

-
-

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	ok
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2000	ok
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	1000	ok
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	1000	ok
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	1000	ok
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	1000	ok
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	1000	ok
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	1000	ok
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	ok
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	2000	ok
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	5000	ok
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2000	ok
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	5000	ok
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	ok
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	ok
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	ok
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	5000	ok
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	2000	ok
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	5000	ok

Complete

18 Dec, 2021

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	All Dimensions
Cl 12.1(Concavity & Convexity )	-	500	Surface Flatness and Finish
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	All Dimensions
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	All Dimensions
Cl 12.4(Water absorption)	-	1000	Water absorption
Cl 12.5(Wet transverse strength)	-	5000	Wet transverse strength
Cl 12.6(Resistance to wear)	-	5000	Resistance to wear
Cl 11(Finish)	-	500	Surface Flatness and Finish
Cl 11(Finish)	-	500	Surface Flatness and Finish

Complete

18 Dec, 2021

-
-

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

All

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	2000	Chemical Composition
Cl 4.2(Workmanship)	-	1500	Mass of Zinc Coating
Cl 4.3(Workmanship)	-	3000	Organic Coating
Cl 6.2(Press)	-	2000	Bend
Cl 6.3(HWB)	-	1500	Pencil Hardness
Cl 6.4(Load Resistance)	-	5000	Impact
Cl 6.5(Cross Hatch)	-	1000	Cross Hatch
Cl 8(Salt Spray)	-	10000	Salt Spray
Cl 9(Length, Width, Thickness & Mass)	-	1000	Dimension
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	Dimension
Cl. 10.1(Camber)	-	1000	Dimension
Cl 8(Salt Spray)	-	10000	Salt Spray
Cl. 10.3, Table 4(Flatness)	-	1000	Dimension
Cl. 10.2(Out of square)	-	1000	Dimension
Cl. 9.4.2(Width)	-	1000	Dimension
Cl. 9.4.4(Mass)	-	1000	Mass
Cl. 7.3.1(Gloss Top Coat)	-	2000	Gloss
Cl. 7.3.2 Table 3(Color Bottom Coat)	-	1500	Colour
Cl. 7.3.2 Table 3(Color Top Coat)	-	1500	Color
Cl. 7.3.1(Gloss Bottom Coat)	-	2000	Gloss

Complete

18 Dec, 2021

-
-

IS 253 (2014)

Specification for common salt (Fourth Revision)

- View breakup
Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

18 Dec, 2021

-
-

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	3000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(POWER INPUT AND CURRENT)	-	7000	-
11(HEATING)	-	8000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	8000	-
14(TRANSIENT OVERVOLTAGES)	-	7000	-
15(MOISTURE RESISTANCE)	-	10000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	8000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	7000	-
18(ENDURANCE)	-	1000	-
19(ABNORMAL OPERATION)	-	9000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	8000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	4000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	7000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	6000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	8000	-
30(RESISTANCE TO HEAT AND FIRE)	-	12000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
15.4 (b)(Cold impact)	-	7000	-

Complete

18 Dec, 2021

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Kailtech Test and Research Centre Pvt. Ltd.

141C, Electronic Complex Industrial Area, Indore, Indore, Madhya Pradesh, 452010

- [email protected]

Scope List

No Record Found

No Record Found

No Record Found