BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 781 Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131001

9810562215 [email protected]

Scope List

Reset

75 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15882 (2009)

Ballasts for discharge lamps (Excluding Tubular Fluorescent Lamps) - Performance requirements

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	250	5% discount for BIS
6(Ballasts designed to operate various supply voltages)	-	500	5% discount for BIS
7(Circuit Power factor)	-	1500	5% discount for BIS
8(Supply Current)	-	2500	5% discount for BIS
9(Current Waveform)	-	3000	5% discount for BIS
10(Magnetic Screening)	-	2250	5% discount for BIS
11(Ignitors)	-	20000	5% discount for BIS
12(Electrical requirements for ballasts For high-pressure mercury)	-	5000	5% discount for BIS
13(Electrical requirements for Ballasts for low-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
14(Electrical requirements for Ballasts for metal halide lamps)	-	5000	5% discount for BIS
15(Electrical requirements for Ballasts for high-pressure sodium Vapour lamps)	-	5000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

- View breakup
Laptop/Notebook/Tablets/Set top box, Data processing machine, printer/plotter, USB/Barcode/rills/Finger prints scanner/Answering machines, Visual Display units, Adapters, Mobile phones, Cash Registers, Point of sale terminals, Copying machines/Duplicators, Smart card readers, Mails processing machines, Franking machines, Passport readers/CCTV camera/Equipments, Smart watches, Power Banks-Rs.52500/-, Wireless keyboards-Rs.28500/- (5% Discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

92500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	250	5% discount for BIS
5.1(By inspection)	-	125	5% discount for BIS
5.2(By inspection)	-	125	5% discount for BIS
6.1(By inspection)	-	13	5% discount for BIS
6.2(By inspection)	-	13	5% discount for BIS
6.3(By inspection)	-	13	5% discount for BIS
6.4(By inspection)	-	13	5% discount for BIS
6.4.3(By inspection)	-	13	5% discount for BIS
6.5(By inspection)	-	29	5% discount for BIS
6.5.1(IEC 60529 and by inspection)	-	10	5% discount for BIS
6.5.2(IEC 60529 and by inspection)	-	9	5% discount for BIS
6.5.3(Annexure N and by inspection)	-	10	5% discount for BIS
6.6(By inspection)	-	13	5% discount for BIS
6.7.1(By inspection)	-	7	5% discount for BIS
6.7.2(By inspection)	-	6	5% discount for BIS
6.8(By inspection)	-	13	5% discount for BIS
6.8.2(By inspection)	-	13	5% discount for BIS
6.9(Annexure H and by inspection)	-	13	5% discount for BIS
6.1(By inspection)	-	13	5% discount for BIS
6.11(By inspection)	-	13	5% discount for BIS
6.12(By inspection)	-	13	5% discount for BIS
6.13(By inspection)	-	13	5% discount for BIS
6.14(By inspection)	-	13	5% discount for BIS
6.15(Annexure J and by inspection)	-	13	5% discount for BIS
6.16(By inspection)	-	13	5% discount for BIS
6.17(Annexure H)	-	13	5% discount for BIS
6.18(Annexure H)	-	13	5% discount for BIS
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	2500	5% discount for BIS
9(By inspection)	-	3000	5% discount for BIS
9.1.1(By inspection)	-	214	5% discount for BIS
9.1.2(By inspection)	-	214	5% discount for BIS
9.1.3(By inspection)	-	214	5% discount for BIS
9.2(By inspection)	-	214	5% discount for BIS
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	218	5% discount for BIS
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.4(by inspection and by plating)	-	214	5% discount for BIS
9.4.1(by inspection)	-	214	5% discount for BIS
9.4.2(by inspection)	-	214	5% discount for BIS
9.5.1(by inspection)	-	214	5% discount for BIS
9.5.2(by inspection)	-	214	5% discount for BIS
10.1.1(By inspection and as per IEC 60988-2-2)	-	77	5% discount for BIS
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	77	5% discount for BIS
10.1.2(By inspection )	-	77	5% discount for BIS
10.1.3(By inspection )	-	77	5% discount for BIS
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	77	5% discount for BIS
10.1.5(By measurement)	-	77	5% discount for BIS
10.1.5.1(by inspection, by measurement, by torque test)	-	77	5% discount for BIS
10.1.6(by inspection after cl 10.1.5)	-	77	5% discount for BIS
10.1.7(by inspection)	-	77	5% discount for BIS
10.1.7.1(by inspection)	-	77	5% discount for BIS
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	77	5% discount for BIS
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	77	5% discount for BIS
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	77	5% discount for BIS
10.1.11(By inspection)	-	77	5% discount for BIS
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	77	5% discount for BIS
10.1.13(By inspection and after the test of cl 17)	-	77	5% discount for BIS
10.1.14(By inspection)	-	77	5% discount for BIS
10.1.15(Figure 11 or 12)	-	77	5% discount for BIS
10.2(By inspection)	-	77	5% discount for BIS
10.2.1(Table 10.2.1)	-	77	5% discount for BIS
10.2.2(By inspection)	-	77	5% discount for BIS
10.2.3(By inspection)	-	77	5% discount for BIS
10.2.4.1(Figure 14 or 15)	-	77	5% discount for BIS
10.2.4.2(During the test of cl 14)	-	77	5% discount for BIS
10.2.4.3(As per table 10.2.4.3)	-	77	5% discount for BIS
10.2.4.4(As per Figure 16)	-	75	5% discount for BIS
11.1(By inspection)	-	70	5% discount for BIS
11.1.1(By inspection)	-	70	5% discount for BIS
11.1.2(by inspection and by analysis of the material)	-	70	5% discount for BIS
11.1.3(by inspection)	-	70	5% discount for BIS
11.2(by inspection and by test)	-	70	5% discount for BIS
11.2.2(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.3(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.3.2(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.4(as per lEC 60227 or IEC 60245.)	-	70	5% discount for BIS
11.2.5(As per annexure H, cl 11.2.5)	-	70	5% discount for BIS
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	70	5% discount for BIS
11.3.2(by inspection and by the tests of clauses 13)	-	70	5% discount for BIS
11.3.3(by inspection)	-	70	5% discount for BIS
11.3.4(by inspection)	-	70	5% discount for BIS
11.3.5(by inspection)	-	70	5% discount for BIS
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	70	5% discount for BIS
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	70	5% discount for BIS
11.3.8(by inspection)	-	70	5% discount for BIS
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	70	5% discount for BIS
11.4.1 (by inspection)	-	70	5% discount for BIS
11.4.2(by inspection)	-	70	5% discount for BIS
11.4.3(by the tests of clauses 15 to 17)	-	70	5% discount for BIS
11.4.4 to 11.4.16(As per relevent type)	-	70	5% discount for BIS
11.5(by inspection)	-	70	5% discount for BIS
11.6.1(by inspection and by manual test)	-	70	5% discount for BIS
11.6.2(by inspection and by manual test)	-	70	5% discount for BIS
11.6.3.1(By inspection)	-	70	5% discount for BIS
11.6.3.2(By inspection)	-	70	5% discount for BIS
11.6.3.3(By inspection)	-	70	5% discount for BIS
11.6.3.4(By inspection)	-	70	5% discount for BIS
11.6.3.5(By inspection)	-	70	5% discount for BIS
11.6.3.6(By inspection)	-	70	5% discount for BIS
11.6.3.7(By inspection)	-	70	5% discount for BIS
11.7.1(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.1.2.2(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.1.2.3(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	70	5% discount for BIS
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	70	5% discount for BIS
11.7.2.11 to 11.7.2.15(By measurement)	-	70	5% discount for BIS
11.8(By inspection)	-	70	5% discount for BIS
11.8.1(By inspection)	-	70	5% discount for BIS
11.8.2(By inspection and as per table 11.8.2)	-	70	5% discount for BIS
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	70	5% discount for BIS
11.9.1(By inspection)	-	70	5% discount for BIS
11.9.1.1(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.2(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.3(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.4(by inspection and manual test)	-	70	5% discount for BIS
11.10.1(by inspection)	-	70	5% discount for BIS
11.10.2(by inspection)	-	70	5% discount for BIS
11.10.3(by inspection and by test of socket-outlet system)	-	70	5% discount for BIS
11.11(Requirements during mounting, maintenance and servicing)	-	70	5% discount for BIS
11.11.1(By inspection)	-	70	5% discount for BIS
11.11.1.1(By inspection)	-	70	5% discount for BIS
11.11.2(By inspection)	-	70	5% discount for BIS
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.4(By inspection)	-	70	5% discount for BIS
11.11.5(By inspection and by manual test)	-	70	5% discount for BIS
11.11.6(By inspection)	-	70	5% discount for BIS
11.11.7(By inspection)	-	70	5% discount for BIS
11.12(As per H, cl 11.12)	-	70	5% discount for BIS
12.1(As per IEC 60529)	-	1500	5% discount for BIS
12.1.6.2(Torque test)	-	1500	5% discount for BIS
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	1500	5% discount for BIS
12.3(as per cl 12.3.1 to 12.3.7)	-	1500	5% discount for BIS
13.1(as per table 13.1)	-	666	5% discount for BIS
13.2(As per table 13.2)	-	666	5% discount for BIS
13.3.1 to 13.3.4(as per clause 13.3.4)	-	668	5% discount for BIS
14.1(As per table 14.1)	-	2300	5% discount for BIS
14.3(As per table 14.1)	-	2300	5% discount for BIS
15(as per cl 15.1 to 15.4)	-	1200	5% discount for BIS
15.5(as per cl 15.5 to 15.6)	-	1200	5% discount for BIS
15.6.4(42 of table 7.2, and as per annexure AA)	-	1200	5% discount for BIS
15.7(as per annexure J, cl 15.7)	-	1250	5% discount for BIS
16.2(as per cl 16.2.1 to 16.2.3 )	-	2500	5% discount for BIS
16.2.4(test of cl 15 repeated )	-	2500	5% discount for BIS
16.2.4(42 of table 7.2)	-	2500	5% discount for BIS
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	580	5% discount for BIS
17.6(as per cl 17.6.1 and 17.6.2)	-	1000	5% discount for BIS
17.7(as per cl 17.7.1 to 17.7.7)	-	1000	5% discount for BIS
17.8(as per cl 17.8.1 to 17.8.4.1)	-	1000	5% discount for BIS
17.9(as per cl 17.9.1 to 17.9.4)	-	1000	5% discount for BIS
17.1(as per cl 17.10.1 to 17.10.4)	-	580	5% discount for BIS
17.11(as per cl 17.11.1 to 17.11.4)	-	580	5% discount for BIS
17.12(as per cl 17.12.1 to 17.12.5)	-	580	5% discount for BIS
17.13(as per cl 17.13.1 to 17.13.4)	-	580	5% discount for BIS
H 17.1.4.2(as per cl H 17.1.4.2)	-	570	5% discount for BIS
H.17.14(as per cl H 17.4.16)	-	570	5% discount for BIS
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	580	5% discount for BIS
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	580	5% discount for BIS
17.16.107( 250 thermal cycles.)	-	580	5% discount for BIS
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	580	5% discount for BIS
17.101.1(as per cl 17.101.1 to 17.105)	-	580	5% discount for BIS
J 17.18.5(as per cl J 17.8.5)	-	580	5% discount for BIS
J 17.18.5(as per cl J 17.8.6)	-	580	5% discount for BIS
J 17.17.2(as per table 13.1)	-	580	5% discount for BIS
J 17.17(As per table 13.2)	-	580	5% discount for BIS
J. 17. 18.2(as per cl J. 17. 18.2)	-	580	5% discount for BIS
J. 17. 18.3(as per cl J. 17. 18.3)	-	580	5% discount for BIS
J. 17. 18.4(as per cl J. 17. 18.4)	-	580	5% discount for BIS
18.1.6(By inspection)	-	200	5% discount for BIS
18.1.6.1(By inspection)	-	150	5% discount for BIS
18.1.6.2(By inspection)	-	150	5% discount for BIS
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	5% discount for BIS
18.2(Impact tester)	-	500	5% discount for BIS
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	5% discount for BIS
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	5% discount for BIS
18.7(Pull test as per table 18.7)	-	500	5% discount for BIS
18.8(as per cl 18.8.2 and 18.8.3)	-	500	5% discount for BIS
18.9(axial pull of 15N/30N)	-	500	5% discount for BIS
18.101(as per cl 18.101.2 and 101.3)	-	500	5% discount for BIS
18.102(Hydrualic test)	-	500	5% discount for BIS
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.2.1(By inspection)	-	125	5% discount for BIS
19.2.2(By inspection)	-	125	5% discount for BIS
19.2.3(By inspection)	-	125	5% discount for BIS
19.2.4(By inspection)	-	125	5% discount for BIS
19.2.4.1(By inspection)	-	125	5% discount for BIS
19.2.5(By inspection)	-	125	5% discount for BIS
19.2.5.1(By inspection)	-	125	5% discount for BIS
19.2.6(By inspection)	-	125	5% discount for BIS
20.1(as per table 20.2)	-	800	5% discount for BIS
20.2.1(as per table 20.3)	-	800	5% discount for BIS
20.2.2(as per table 20.4)	-	900	5% discount for BIS
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	1600	5% discount for BIS
21.2.2 to 21.2.6(as per annexure G)	-	1600	5% discount for BIS
21.2.7(As per cl G.4)	-	1800	5% discount for BIS
22.1.1(As per cl 21.1.3 to 21.1.6)	-	5000	5% discount for BIS
24.1(as per IEC 60742)	-	1000	5% discount for BIS
24.1(as per IEC 60384-14)	-	1000	5% discount for BIS
24.1(as per IEC 60127 or IEC 60269)	-	1000	5% discount for BIS
25(as per annexure H)	-	5000	5% discount for BIS
27.1(as per annexure H)	-	1875	5% discount for BIS
27.2(as per cl 27.2.1 and 27.2.2)	-	1875	5% discount for BIS
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	1875	5% discount for BIS
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	1875	5% discount for BIS
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	80	5% discount for BIS
11.1.102(As per IEC 60216-1:2001)	-	80	5% discount for BIS
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	80	5% discount for BIS
11.4.101(as per cl 11.4.101)	-	70	5% discount for BIS
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	70	5% discount for BIS
11.4.107(As per annexure DD)	-	70	5% discount for BIS
11.6.3.101(As per table 7, item 117)	-	70	5% discount for BIS
11.101(As per annexure BB)	-	70	5% discount for BIS
12.101(None)	-	1500	5% discount for BIS
12.101.2(15 K+Tmax for 16 hr)	-	1000	5% discount for BIS
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	500	5% discount for BIS
14.101.1( as per cl 14.102 and 14.102.1)	-	400	5% discount for BIS
15.5.3.101 to 15.5.3.105(According to type of control)	-	1200	5% discount for BIS
15.5.3.109( voltage specified in Table 13.2)	-	1200	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	200	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
10(PROVISION FOR EARTHING)	-	1000	5% discount for BIS
11(MOISTURE RESISTANCE)	-	10000	5% discount for BIS
12(Electric Strength)	-	1000	5% discount for BIS
13(Thermal endurance test for winding of ballasts)	-	8000	5% discount for BIS
14(Fault conditions)	-	1000	5% discount for BIS
15(Transformer heating)	-	5000	5% discount for BIS
16(Construction)	-	3000	5% discount for BIS
17(Creepage distance and clearances)	-	1200	5% discount for BIS
18(Screws, current carrying parts and connections)	-	1000	5% discount for BIS
19(Resistance to heat, fire and tracking)	-	5000	5% discount for BIS
20(Resistance to corrosion)	-	6500	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	5% discount for BIS
6(Interchangeability)	-	1500	5% discount for BIS
7(Protection against accidental contact with live parts)	-	6000	5% discount for BIS
8(Insulation Resistance and Electric Strength)	-	11000	5% discount for BIS
9(MECHANICAL STRENGTH)	-	3000	5% discount for BIS
10(cap temperature)	-	6000	5% discount for BIS
11(Resistance to Heat)	-	4000	5% discount for BIS
12(Resistance to Flame and Ignition)	-	3000	5% discount for BIS
13(Fault conditions)	-	6000	5% discount for BIS
14(Creepage distance and clearances)	-	1500	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	400	5% discount for BIS
7(Marking and instructions)	-	500	5% discount for BIS
8(Protection against live parts)	-	600	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	200	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	1500	5% discount for BIS
11(HEATING)	-	2300	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	5% discount for BIS
14(IMPULSE VOLTAGE TEST)	-	4000	5% discount for BIS
15(HUMIDITY TREATMENT TEST)	-	5000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	5% discount for BIS
18(ENDURANCE)	-	15300	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	4000	5% discount for BIS
21(MECHANICAL STRENGTH)	-	3000	5% discount for BIS
22(CONSTRUCTION)	-	5000	5% discount for BIS
23(INTERNAL WIRING)	-	2000	5% discount for BIS
24(COMPONENTS)	-	200	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1500	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	2000	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	1500	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1500	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	3000	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	2500	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

25600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	200	5% discount for BIS
7(Marking and instructions)	-	500	5% discount for BIS
8(Protection against live parts)	-	800	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	200	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	1000	5% discount for BIS
11(HEATING)	-	1000	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	5% discount for BIS
15(MOISTURE RESISTANCE)	-	2300	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	5% discount for BIS
18(ENDURANCE)	-	200	5% discount for BIS
19(ABNORMAL OPERATION)	-	1800	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1200	5% discount for BIS
21(MECHANICAL STRENGTH)	-	1200	5% discount for BIS
22(CONSTRUCTION)	-	1500	5% discount for BIS
23(INTERNAL WIRING)	-	1000	5% discount for BIS
24(COMPONENTS)	-	200	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1200	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1100	5% discount for BIS
27(PROVISION FOR EARTHING)	-	1000	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	1200	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1200	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1200	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	200	5% discount for BIS
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	300	5% discount for BIS
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	500	5% discount for BIS
Cl.11 of IS 302-2201: 2008(Heating)	-	700	5% discount for BIS
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	600	5% discount for BIS
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	600	5% discount for BIS
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	600	5% discount for BIS
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	750	5% discount for BIS
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	600	5% discount for BIS
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	300	5% discount for BIS
Cl.18 of IS 368:2014(Endurance)	-	750	5% discount for BIS
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	600	5% discount for BIS
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	5% discount for BIS
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	700	5% discount for BIS
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	5% discount for BIS
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	5% discount for BIS
Cl.24 of IS 302-2-201: 2008(Component)	-	500	5% discount for BIS
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	5% discount for BIS
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	5% discount for BIS
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	5% discount for BIS
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	5% discount for BIS
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	5% discount for BIS
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	600	5% discount for BIS
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	5% discount for BIS
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

231000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification, IS 60898-1)	-	25	5% discount for BIS
4.3(Classification, IS 60898-1)	-	25	5% discount for BIS
4.4(Classification, IS 60898-1)	-	25	5% discount for BIS
4.5(Classification, IS 60898-1)	-	25	5% discount for BIS
4.5.1(Classification, IS 60898-1)	-	25	5% discount for BIS
4.5.2(Classification, IS 60898-1)	-	25	5% discount for BIS
4.6(Classification, IS 60898-1)	-	25	5% discount for BIS
4.7(Classification, IS 60898-1)	-	25	5% discount for BIS
6(Marking and other product information, IS 60898-1)	-	300	5% discount for BIS
8.1.1(General, IS 60898-1)	-	200	5% discount for BIS
8.1.2(Mechanism, IS 60898-1)	-	200	5% discount for BIS
8.1.3(Clearances and creepage distances, IS 60898-1)	-	600	5% discount for BIS
8.1.4.1(Reliability of Screws current carrying parts and connections IS 60898-1)	-	187	5% discount for BIS
8.1.4.2(Reliability of Screws current carrying parts and connections IS 60898-1)	-	187	5% discount for BIS
8.1.4.3(Reliability of Screws current carrying parts and connections IS 60898-1)	-	187	5% discount for BIS
8.1.4.4(Reliability of Screws current carrying parts and connections IS 60898-1)	-	191	5% discount for BIS
8.1.5.1(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.2(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.3(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.4(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.5(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.6(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.7(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.8(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.9(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.10(Reliability of terminals for external conductors, IS 60898-1)	-	105	5% discount for BIS
8.1.5.11(Reliability of terminals for external conductors, IS 60898-1)	-	100	5% discount for BIS
8.1.5.12(Reliability of terminals for external conductors, IS 60898-1)	-	100	5% discount for BIS
8.2(Protection against Electric Shock, IS 60898-1)	-	250	5% discount for BIS
8.3.2(Dielectric strength at power frequency, IS 60898-1)	-	415	5% discount for BIS
8.3.3(Isolating capability, IS 60898-1)	-	415	5% discount for BIS
8.3.4(Dielectric strength at rated impulse withstand voltage ( Uimp), IS 60898-1)	-	420	5% discount for BIS
8.4(Temperature-rise, IS 60898-1)	-	6656	5% discount for BIS
8.5(Uninterrupted duty, IS 60898-1)	-	17500	5% discount for BIS
8.6(Automatic operation, IS 60898-1)	-	5625	5% discount for BIS
8.7(Mechanical and electrical endurance, IS 60898-1)	-	8000	5% discount for BIS
8.8(Performance at short-circuit currents, IS 60898-1)	-	250	5% discount for BIS
8.9(Resistance to mechanical shock and impact, IS 60898-1)	-	3750	5% discount for BIS
8.1(Resistance to heat, IS 60898-1)	-	3125	5% discount for BIS
8.11(Resistance to abnormal heat and to fire, IS 60898-1)	-	2500	5% discount for BIS
8.12(Resistance to rusting, IS 60898-1)	-	5125	5% discount for BIS
8.13(Power loss, IS 60898-1)	-	6000	5% discount for BIS
9.3(Test of indelibility of marking, IS 60898-1)	-	300	5% discount for BIS
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	2250	5% discount for BIS
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	940	5% discount for BIS
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	940	5% discount for BIS
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	940	5% discount for BIS
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	930	5% discount for BIS
9.6(Test of protection against electric shock, IS 60898-1)	-	750	5% discount for BIS
9.7.1(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.2(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.3(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.4(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.5.1(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	535	5% discount for BIS
9.7.5.3(Test of protection against electric shock, IS 60898-1)	-	540	5% discount for BIS
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	9407	5% discount for BIS
9.8.5(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	9407	5% discount for BIS
9.9(28- day test, IS 60898-1)	-	70000	5% discount for BIS
9.10.2(Test of tripping characteristic, IS 60898-1)	-	3219	5% discount for BIS
9.10.3(Test of tripping characteristic, IS 60898-1)	-	4219	5% discount for BIS
9.10.4(Test of tripping characteristic, IS 60898-1)	-	4219	5% discount for BIS
9.10.5(Test of tripping characteristic, IS 60898-1)	-	4219	5% discount for BIS
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	24000	5% discount for BIS
9.13.1(Mechanical Stress, IS 60898-1)	-	2250	5% discount for BIS
9.13.2.2(Mechanical Stress, IS 60898-1)	-	2250	5% discount for BIS
9.13.2.3(Mechanical Stress, IS 60898-1)	-	2250	5% discount for BIS
9.13.2.4(Mechanical Stress, IS 60898-1)	-	2250	5% discount for BIS
9.13.2.5(Mechanical Stress, IS 60898-1)	-	2250	5% discount for BIS
9.14.1(Test of resistance to heat, IS 60898-1)	-	3125	5% discount for BIS
9.14.2(Test of resistance to heat, IS 60898-1)	-	3125	5% discount for BIS
9.14.3(Test of resistance to heat, IS 60898-1)	-	3125	5% discount for BIS
9.15(Resistance to abnormal heat and to fire)	-	7500	5% discount for BIS
9.16(Test of resistance to rusting)	-	15375	5% discount for BIS
9.13(Resistance to mechanical shock and impact)	-	2250	5% discount for BIS
8.1.6(Non-interchangeability)	-	200	5% discount for BIS
9.12.12(Verification of the circuit-breaker after short-circuit tests)	-	500	5% discount for BIS
9.12.11.2.2(Short-circuit test for verifying the suitability of circuit-breakers for use in IT systems)	-	500	5% discount for BIS
2(Tripping tests)	-	1000	5% discount for BIS
3(Verification of clearances between open contacts)	-	600	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7(Verification)	-	100	5% discount for BIS
Cl. 7(Verification)	-	100	5% discount for BIS
Cl.8(Verification)	-	300	5% discount for BIS
Cl.10(Verification)	-	300	5% discount for BIS
Cl.11(Verification)	-	400	5% discount for BIS
Cl.13(Verification)	-	300	5% discount for BIS
Cl.14(Verification)	-	400	5% discount for BIS
Cl.15(Verification)	-	1000	5% discount for BIS
Cl. 16(Verification)	-	300	5% discount for BIS
Cl.17(Verification)	-	300	5% discount for BIS
Cl.19(Verification)	-	1000	5% discount for BIS
Cl.20(Verification)	-	500	5% discount for BIS
Cl.21(Verification)	-	500	5% discount for BIS
Cl.22(Verification)	-	500	5% discount for BIS
Cl.23(Verification)	-	300	5% discount for BIS
Cl.24(Verification)	-	200	5% discount for BIS
Cl.25(Verification)	-	600	5% discount for BIS
Cl.26(Verification)	-	300	5% discount for BIS
Cl.27(Verification)	-	300	5% discount for BIS
Cl.28(Verification)	-	300	5% discount for BIS
CL.29(Verification)	-	300	5% discount for BIS
Cl.30(Verification)	-	750	5% discount for BIS
Cl.31(Verification)	-	500	5% discount for BIS
Cl.32(Verification)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Protection against access to live parts)	-	750	5% discount for BIS
10.0(Input and Current)	-	750	5% discount for BIS
11.0(Heating)	-	1700	5% discount for BIS
13.0(Leakage Current and electric strength at operating temperature)	-	750	5% discount for BIS
14.0(Transient Overvoltage)	-	1200	5% discount for BIS
15.0(Moisture resistance)	-	2300	5% discount for BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	750	5% discount for BIS
17.0(Overload Protection of transformer and associated circuit)	-	750	5% discount for BIS
19.0(Abnormal Operation)	-	1800	5% discount for BIS
20.0(Stability and mechanical hazards)	-	1250	5% discount for BIS
21.0(Mechanical Strength)	-	1250	5% discount for BIS
22.0(Construction)	-	750	5% discount for BIS
23.0(Internal Wiring)	-	1200	5% discount for BIS
24.0(Components)	-	250	5% discount for BIS
25.0(Supply Connection and External Flexible Cords)	-	1250	5% discount for BIS
26.0(Terminals for external conductors)	-	1500	5% discount for BIS
27.0(Provision For Earthing)	-	1500	5% discount for BIS
28.0(Screws and Connections)	-	1250	5% discount for BIS
29.0(Creepage Distances and Clearances)	-	1250	5% discount for BIS
30.0(Resistance To Heat and Fire)	-	2500	5% discount for BIS
31.0(Resistance To Rusting)	-	1500	5% discount for BIS
32.0(Radiation, Toxicity and Similar Hazards)	-	1250	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

- View breakup
Electronic games (Video)-Rs.26000/-, Plasma/LCD/LED/TVs of screen size <32"-Rs.52000/-, Plasma/LCD/LED/TVs of screen size >32" Rs.-45000/-, Power adapter-Rs.45000/-, Optical disc players-Rs.26000/-, Amplifier-Rs.-26000/- (5% Discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

15025 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	80	5% discount for BIS
7.0(Marking and Instructions)	-	400	5% discount for BIS
8.0(Protection against access to live parts)	-	400	5% discount for BIS
10.0(Input and Current)	-	500	5% discount for BIS
11.0(Heating)	-	600	5% discount for BIS
13.0(Leakage Current and electric strength at operating temperature)	-	350	5% discount for BIS
14.0(Transient Overvoltage)	-	550	5% discount for BIS
15.0(Moisture resistance)	-	1500	5% discount for BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	350	5% discount for BIS
17.0(Overload Protection of transformer and associated circuit)	-	400	5% discount for BIS
19.0(Abnormal Operation)	-	1600	5% discount for BIS
20.0(Stability and mechanical hazards)	-	800	5% discount for BIS
21.0(Mechanical Strength)	-	525	5% discount for BIS
22.0(Construction)	-	800	5% discount for BIS
23.0(Internal Wiring)	-	500	5% discount for BIS
25.0(Supply Connection and External Flexible Cords)	-	500	5% discount for BIS
26.0(Terminals for external conductors)	-	350	5% discount for BIS
27.0(Provision For Earthing)	-	400	5% discount for BIS
28.0(Screws and Connections)	-	400	5% discount for BIS
29.0(Creepage Distances and Clearances)	-	400	5% discount for BIS
30.0(Resistance To Heat and Fire)	-	1200	5% discount for BIS
31.0(Resistance To Rusting)	-	1200	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification )	-	100	5% discount for BIS
6(Classification )	-	100	5% discount for BIS
7(Marking)	-	5	5% discount for BIS
7.1(Marking : Warning for Open- outlet )	-	5	5% discount for BIS
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	5	5% discount for BIS
7.1(Marking : Statement for a pressure-relief device)	-	5	5% discount for BIS
7.1(Marking : Rated capacity)	-	5	5% discount for BIS
7.1(Marking : Rated pressure)	-	5	5% discount for BIS
7.1(Marking : Country of manufacture)	-	5	5% discount for BIS
7.1(Marking: IP Number)	-	5	5% discount for BIS
7.1(Marking: Symbol for Class II)	-	5	5% discount for BIS
7.1(Marking: Model or type reference)	-	5	5% discount for BIS
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	5	5% discount for BIS
7.1(Marking : Rated power input)	-	5	5% discount for BIS
7.1(Marking : Symbol for nature of supply )	-	5	5% discount for BIS
7.1(Marking : Rated Voltage )	-	5	5% discount for BIS
7.6(Marking : Symbol used )	-	5	5% discount for BIS
7.8(Marking : Terminals )	-	5	5% discount for BIS
7.11(Marking : Indication of controls )	-	5	5% discount for BIS
7.13(Marking : Official language of Instruction )	-	5	5% discount for BIS
7.14(Marking : Legibility and durability)	-	5	5% discount for BIS
7.101(Marking : Indifiction of water inlet and water outlet )	-	5	5% discount for BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	300	5% discount for BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	300	5% discount for BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	225	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	25	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	25	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	25	5% discount for BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	100	5% discount for BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	100	5% discount for BIS
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	100	5% discount for BIS
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	200	5% discount for BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	5% discount for BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	200	5% discount for BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	5% discount for BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	100	5% discount for BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	5% discount for BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	600	5% discount for BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	200	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	200	5% discount for BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	5% discount for BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	300	5% discount for BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	5% discount for BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	300	5% discount for BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	200	5% discount for BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	300	5% discount for BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	250	5% discount for BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	150	5% discount for BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2350	5% discount for BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	500	5% discount for BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	200	5% discount for BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	400	5% discount for BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	300	5% discount for BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	300	5% discount for BIS
(Cl.22 of IS 2082:2018)(Finish)	-	300	5% discount for BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	150	5% discount for BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	150	5% discount for BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	100	5% discount for BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	100	5% discount for BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	100	5% discount for BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	20	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	100	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	50	5% discount for BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	50	5% discount for BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	20	5% discount for BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	20	5% discount for BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	20	5% discount for BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	50	5% discount for BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	25	5% discount for BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	20	5% discount for BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	50	5% discount for BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	50	5% discount for BIS
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	20	5% discount for BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	20	5% discount for BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	10	5% discount for BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	10	5% discount for BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	20	5% discount for BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	20	5% discount for BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	20	5% discount for BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	20	5% discount for BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	25	5% discount for BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	25	5% discount for BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	5	5% discount for BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	5	5% discount for BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	5	5% discount for BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	200	5% discount for BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	10	5% discount for BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	5	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	5	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	5	5% discount for BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	5	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	10	5% discount for BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	10	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	10	5% discount for BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	5	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	50	5% discount for BIS
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	250	5% discount for BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	250	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	15	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	100	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	10	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	10	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	10	5% discount for BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	100	5% discount for BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	100	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Earthing)	-	250	5% discount for BIS
9.0(Terminal Marking)	-	250	5% discount for BIS
9.0(Terminal Marking)	-	250	5% discount for BIS
11.0(DUTY AND RATING)	-	250	5% discount for BIS
11.0(DUTY AND RATING)	-	250	5% discount for BIS
15.2(Rating)	-	1750	5% discount for BIS
15.2(Rating)	-	1750	5% discount for BIS
16.1.1(Insulation Resistance Test)	-	750	5% discount for BIS
16.1.1(Insulation Resistance Test)	-	750	5% discount for BIS
16.1.2(Measurement of Resistance of Windings of Stator)	-	1250	5% discount for BIS
16.1.2(Measurement of Resistance of Windings of Stator)	-	1250	5% discount for BIS
16.1.3(No Load Test)	-	2000	5% discount for BIS
16.1.3(No Load Test)	-	2000	5% discount for BIS
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	5% discount for BIS
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	5% discount for BIS
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	2500	5% discount for BIS
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	2500	5% discount for BIS
16.1.6(High Voltage Test)	-	1250	5% discount for BIS
16.1.6(High Voltage Test)	-	1250	5% discount for BIS
16.2.1(Dimensions)	-	750	5% discount for BIS
16.2.1(Dimensions)	-	750	5% discount for BIS
16.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	250	5% discount for BIS
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	250	5% discount for BIS
16.2.2.3.1(Direct proportion method)	-	250	5% discount for BIS
16.2.2.3.1(Direct proportion method)	-	250	5% discount for BIS
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	5% discount for BIS
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	5% discount for BIS
16.2.4(Temperature Rise Test)	-	1250	5% discount for BIS
16.2.4(Temperature Rise Test)	-	1250	5% discount for BIS
16.2.5(Momentary Overload Test)	-	2500	5% discount for BIS
16.2.5(Momentary Overload Test)	-	2500	5% discount for BIS
16.3.1( Test for Vibration Severity of Motor)	-	750	5% discount for BIS
16.3.1( Test for Vibration Severity of Motor)	-	750	5% discount for BIS
16.3.2( Test for Noise Levels of Motor)	-	750	5% discount for BIS
16.3.2( Test for Noise Levels of Motor)	-	750	5% discount for BIS
16.3.3( Test for Degree of Protection by Enclosure)	-	3000	5% discount for BIS
16.3.3( Test for Degree of Protection by Enclosure)	-	3000	5% discount for BIS
16.3.4(Over Speed Test)	-	750	5% discount for BIS
16.3.4(Over Speed Test)	-	750	5% discount for BIS
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1250	5% discount for BIS
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1250	5% discount for BIS
18.3(BIS Certification Marking )	-	250	5% discount for BIS
18.3(Marking)	-	250	5% discount for BIS
15.3.2(Marking)	-	50	5% discount for BIS
15.3.2(Marking)	-	50	5% discount for BIS
12.2(Pull up torque)	-	800	5% discount for BIS
6(Method of cooling)	-	750	5% discount for BIS
Cl. 16.3.5(Temperature rise test at limiting values of voltage and frequnancy variation)	-	1250	5% discount for BIS
Cl. 16.3.4(Over Speed test)	-	750	5% discount for BIS
Cl. 16.3.3(Test for degree of protection by enclosure)	-	3000	5% discount for BIS
Cl. 16.3.2(Noise)	-	750	5% discount for BIS
Cl. 16.3.1(Vibration test)	-	750	5% discount for BIS
Cl. 11(Duty and Rating)	-	250	5% discount for BIS
Cl. 16.2.1(Dimensions)	-	750	5% discount for BIS
Cl. 16.1.6(High Voltage Test)	-	1250	5% discount for BIS
Cl. 16.1.1(Insulation Resistance test)	-	750	5% discount for BIS
Cl. 16.2.5(Momentary overload test)	-	2500	5% discount for BIS
Cl. 8(Earthing)	-	250	5% discount for BIS
Cl. 6(Method of cooling)	-	750	5% discount for BIS
Cl. 9(Terminal marking)	-	250	5% discount for BIS
Cl. 16.2.4(Temperature rise test )	-	1250	5% discount for BIS
Cl. 16.2.3(Full load test)	-	1500	5% discount for BIS
Cl. 12.2(Pull up test)	-	800	5% discount for BIS
Cl. 16.1.4 & 16.2.2(Locked rotor readings)	-	1500	5% discount for BIS
Cl. 16.1.5(Reduced voltage running test)	-	2500	5% discount for BIS
Cl. 16.1.3(No load at rated voltage)	-	2000	5% discount for BIS
Cl. 16.1.2(Measurment of stator resistance)	-	1250	5% discount for BIS
Cl. 18.3(BIS Certification Marking)	-	250	5% discount for BIS
Cl. 15.2(rating)	-	1750	5% discount for BIS
Cl. 18.2(Marking and labelling)	-	250	5% discount for BIS
Cl. 18.1(Marking and labelling)	-	250	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	5% discount for bis
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	50	5% discount for bis
8.1,a(Marking )	-	5	5% discount for bis
8.1,b(Marking )	-	5	5% discount for bis
8.1,c(Marking )	-	5	5% discount for bis
8.1,d(Marking )	-	5	5% discount for bis
8.1,e(Marking )	-	5	5% discount for bis
8.1,f(Marking )	-	5	5% discount for bis
8.1,g(Marking )	-	5	5% discount for bis
8.2(Marking )	-	5	5% discount for bis
8.3,a(Marking )	-	2	5% discount for bis
8.3,b(Marking )	-	2	5% discount for bis
8.3,c(Marking )	-	2	5% discount for bis
8.3,d(Marking )	-	2	5% discount for bis
8.3,e(Marking )	-	2	5% discount for bis
8.4(Marking )	-	10	5% discount for bis
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	100	5% discount for bis
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	10	5% discount for bis
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	10	5% discount for bis
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	10	5% discount for bis
6.2(Rating)	-	200	5% discount for bis
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1800	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1800	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1800	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1800	5% discount for bis
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	5% discount for bis
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	5% discount for bis
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	400	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1200	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1200	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1200	5% discount for bis
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	5% discount for bis
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	200	5% discount for bis
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	650	5% discount for bis
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	200	5% discount for bis
10.1(Speed Regulators)	-	200	5% discount for bis
10.2(Speed Regulators)	-	500	5% discount for bis
10.2(Speed Regulators)	-	500	5% discount for bis
10.3(Speed Regulators)	-	200	5% discount for bis
10.4(Speed Regulators)	-	250	5% discount for bis
10.5(Speed Regulators)	-	200	5% discount for bis
10.6(Speed Regulators)	-	50	5% discount for bis
10.7(Speed Regulators)	-	50	5% discount for bis
10.7(Speed Regulators)	-	50	5% discount for bis
10.8(Speed Regulators)	-	50	5% discount for bis
11.1(Starting)	-	500	5% discount for bis
11.2(Starting)	-	250	5% discount for bis
12(Interchangeability)	-	100	5% discount for bis
13(Silent Operation)	-	550	5% discount for bis
14.3 & Table 1(Test for Air Performance)	-	700	5% discount for bis
14.3 & Table 1(Test for Air Performance)	-	700	5% discount for bis
14.4(Measurement of Speed of the Fan )	-	200	5% discount for bis
14.5(Measurement of Power factor and Power Input)	-	100	5% discount for bis
14.5(Measurement of Power factor and Power Input)	-	100	5% discount for bis
16(Endurance Test)	-	5000	5% discount for bis
16(Endurance Test)	-	5000	5% discount for bis
16(Endurance Test)	-	5000	5% discount for bis
16(Endurance Test)	-	5000	5% discount for bis
16(Endurance Test)	-	5000	5% discount for bis
17(Test for Harmonic Distortion)	-	1500	5% discount for bis

Complete

31 Dec, 2023

-
-

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Sizes, Speed & Types)	-	300	5% discount for BIS
4(Rated Voltage)	-	100	5% discount for BIS
5(Rated Frequency)	-	100	5% discount for BIS
6(Design and General Construction)	-	750	5% discount for BIS
7(Finish)	-	100	5% discount for BIS
8(Height of the Fan)	-	200	5% discount for BIS
9(Insulating Materials)	-	600	5% discount for BIS
10(Speed Regulators)	-	2500	5% discount for BIS
11(Starting)	-	500	5% discount for BIS
12(Interchangeability)	-	200	5% discount for BIS
13(Silent Operation)	-	500	5% discount for BIS
14(Oscillating Mechanism)	-	300	5% discount for BIS
15(Marking)	-	250	5% discount for BIS
16.2(Air Delivery Test)	-	2500	5% discount for BIS
16.3(Temperature-rise)	-	500	5% discount for BIS
16.4(Moisture Proofness Test (for Regulators only))	-	1000	5% discount for BIS
16.5(Cord grip test)	-	500	5% discount for BIS
16.6(Mechanical Endurance Test (for Regulators only))	-	1000	5% discount for BIS
16.7(Power Factor)	-	200	5% discount for BIS
16.8(AC Leakage Test)	-	500	5% discount for BIS
16.9(High Voltage)	-	500	5% discount for BIS
16.1(Earthing Continuity Test)	-	200	5% discount for BIS
16.11(Electrical Input Test)	-	500	5% discount for BIS
16.12(Measurement of Fan Speed)	-	500	5% discount for BIS
16.13(Flash Test)	-	300	5% discount for BIS
16.14(Insulation-resistance )	-	300	5% discount for BIS
17(Performance Reqirement)	-	200	5% discount for BIS
18( Tolerances on rating)	-	100	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

14500 View breakup
Rs.14,500/-(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	100	5% discount for BIS
13.1 (a)(Marking)	-	10	5% discount for BIS
13.1 (b)(Marking)	-	10	5% discount for BIS
13.1 (c)(Marking)	-	10	5% discount for BIS
13.1 (d)(Marking)	-	10	5% discount for BIS
13.1 (e)(Marking)	-	10	5% discount for BIS
13.1 (f)(Marking)	-	10	5% discount for BIS
13.1 (g)(Marking)	-	10	5% discount for BIS
13.1 (h)(Marking)	-	10	5% discount for BIS
13.1 (j)(Marking)	-	10	5% discount for BIS
13.2(Marking)	-	20	5% discount for BIS
13.4(Marking)	-	20	5% discount for BIS
3.1(Sizes )	-	300	5% discount for BIS
4.1(Rated Voltage)	-	100	5% discount for BIS
5.1(Rated frequency)	-	100	5% discount for BIS
6.1(Design and General Construction)	-	65	5% discount for BIS
6.3(Design and General Construction)	-	65	5% discount for BIS
6.4(Design and General Construction)	-	65	5% discount for BIS
6.5(Design and General Construction)	-	65	5% discount for BIS
6.6(Design and General Construction)	-	65	5% discount for BIS
6.7(Design and General Construction)	-	65	5% discount for BIS
6.9(Design and General Construction)	-	65	5% discount for BIS
6.11(Design and General Construction)	-	65	5% discount for BIS
6.12(Design and General Construction)	-	65	5% discount for BIS
10.1(Starting )	-	300	5% discount for BIS
11.1(Interchangeability)	-	400	5% discount for BIS
14.2 & 15.1(Air Delivery)	-	4700	5% discount for BIS
14.3(Temperature-Rise)	-	1000	5% discount for BIS
14.4(Moistureproofness (for regulators only))	-	1000	5% discount for BIS
14.5(Mechanical Endurance (for regulators only))	-	500	5% discount for BIS
14.1 & 14.6(Power factor)	-	200	5% discount for BIS
14.7(ac leakage)	-	500	5% discount for BIS
14.8(High voltage test)	-	500	5% discount for BIS
14.9(Insulation-Resistance)	-	500	5% discount for BIS
14.1(Earthing continuity)	-	400	5% discount for BIS
14.11 & 15.1(Electrical Input)	-	400	5% discount for BIS
14.12 & 16(Fan Speed)	-	500	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 1534 : Part 1 (1977)

Ballasts for fluorescent lamps:Part 1 For switch start circuits

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(General Design, Construction and workmanship)	-	1200	5% discount for BIS
4(Terminals For External Wiring)	-	1100	5% discount for BIS
5(Screws, Current-Carrying Parts And Connections)	-	900	5% discount for BIS
6(Provision For Earthing)	-	1000	5% discount for BIS
7(Creepage Distances and Clearances)	-	850	5% discount for BIS
8(Marking)	-	850	5% discount for BIS
9.4(Visual Examination)	-	500	5% discount for BIS
9.5(Protection against Accidental Contacts and Electric Shock)	-	1600	5% discount for BIS
9.6(Voltage Across Capacitors)	-	2300	5% discount for BIS
9.7(Moisture Resistance and Insulation)	-	3200	5% discount for BIS
9.8(Test for Thermal Endurance Of Windings)	-	3300	5% discount for BIS
9.9(Test For Limitations Of Ballast Heating)	-	3200	5% discount for BIS
9.1(Test for Mechanical Strength)	-	2200	5% discount for BIS
9.11(Resistance To Heat)	-	3000	5% discount for BIS
9.12(Resistance To Corrosion)	-	2800	5% discount for BIS
9.13(Performance)	-	17000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

15250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Size, Speed and Types)	-	200	5% discount for BIS
4.0(Rated Voltages)	-	100	5% discount for BIS
5.0(Rated Frequency)	-	100	5% discount for BIS
6.0(Design and General Construction)	-	750	5% discount for BIS
7.8(Speed Regulators)	-	600	5% discount for BIS
7.9(Interchangeability)	-	200	5% discount for BIS
7.11(Oscillating Mechanism)	-	400	5% discount for BIS
9.0(Marking)	-	300	5% discount for BIS
10.3(Air Delivery Test)	-	2500	5% discount for BIS
10.4(Temperature-Rise Test)	-	500	5% discount for BIS
10.5(Leakage Current)	-	250	5% discount for BIS
10.6(High Voltage Test)	-	250	5% discount for BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	250	5% discount for BIS
10.8(Construction)	-	300	5% discount for BIS
10.9(Fan Speed and Input)	-	500	5% discount for BIS
10.1(Earthing Connection)	-	250	5% discount for BIS
10.11(Protection against Electric Shock)	-	250	5% discount for BIS
10.12(Moisture Resistance Test)	-	1000	5% discount for BIS
10.13(Mechanical Endurance Test (for Regulators Only))	-	750	5% discount for BIS
10.14(Cord Grip Test)	-	700	5% discount for BIS
10.16(Creepage Distances and Clearances)	-	250	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	5% discount for BIS
6(Classification- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.2(Marking)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.1(Marking- IS 302-1)	-	300	5% discount for BIS
7.4(Marking)	-	300	5% discount for BIS
7.5(Marking)	-	300	5% discount for BIS
7.6(Marking)	-	300	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	500	5% discount for BIS
9(Starting, IS 302-1)	-	300	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	600	5% discount for BIS
11(Heating, IS 302-1)	-	600	5% discount for BIS
11(Heating, IS 302-1)	-	600	5% discount for BIS
11(Heating, IS 302-1)	-	600	5% discount for BIS
11(Heating, IS 302-1)	-	600	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	1000	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	400	5% discount for BIS
15.2(Moisture Resistance-Spillage test)	-	400	5% discount for BIS
15(Moisture Resistance, IS 302-1)	-	800	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	700	5% discount for BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	700	5% discount for BIS
21(Mechanical Strength, IS 302-1)	-	500	5% discount for BIS
21(Mechanical Strength, IS 302-1)	-	500	5% discount for BIS
22.1(Construction, IS 302-1)	-	170	5% discount for BIS
22.2(Construction)	-	170	5% discount for BIS
22.3(Construction)	-	160	5% discount for BIS
22.4(Construction)	-	160	5% discount for BIS
22.5(Construction)	-	160	5% discount for BIS
22.6(Construction)	-	160	5% discount for BIS
22.8(Construction)	-	160	5% discount for BIS
22.9(Construction)	-	160	5% discount for BIS
22.1(Construction)	-	170	5% discount for BIS
23(Internal Wiring, IS 302-1)	-	300	5% discount for BIS
24.1(Components, IS 302-1)	-	40	5% discount for BIS
24.2(Components)	-	40	5% discount for BIS
24.4(Components)	-	40	5% discount for BIS
24.5(Components)	-	40	5% discount for BIS
24.6(Components)	-	40	5% discount for BIS
24.7(Components)	-	40	5% discount for BIS
24.8(Components)	-	40	5% discount for BIS
24.9(Components)	-	40	5% discount for BIS
Cl.24(Verification)	-	40	5% discount for BIS
Cl.22(Verification)	-	1300	5% discount for BIS
Cl.23(Verification)	-	300	5% discount for BIS
Cl.25(Verification)	-	400	5% discount for BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	400	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	400	5% discount for BIS
27(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	400	5% discount for BIS
29(Clearances and Distances through Insulation, IS 302-1)	-	300	5% discount for BIS
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	500	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	300	5% discount for BIS
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	700	5% discount for BIS
34.3(Whisking egg whites )	-	250	5% discount for BIS
34.4(IDLI batter-Grinding of black gram)	-	500	5% discount for BIS
34.4(IDLI batter-Grinding of rice)	-	300	5% discount for BIS
34.5.1 (a)(Operational test for juicers )	-	200	5% discount for BIS
34.5.1 (b)(Operational test for juicers )	-	200	5% discount for BIS
34.5.2(Operational test for juicers )	-	50	5% discount for BIS
35(Temperature withstand test for bowl)	-	500	5% discount for BIS
36(Test for controls )	-	500	5% discount for BIS
37(Strength of Assembly )	-	200	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

98000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Lamp Dimensions )	-	200	5% discount for BIS
4.2(Glass Bulb)	-	200	5% discount for BIS
4.3.1(Caps)	-	50	5% discount for BIS
4.3.2(Caps)	-	50	5% discount for BIS
4.3.3(Caps)	-	50	5% discount for BIS
4.3.4(Caps : Insulation Resistance)	-	50	5% discount for BIS
5.1(MARKING : Mark of origin)	-	60	5% discount for BIS
5.1(MARKING : Rated wattage; )	-	60	5% discount for BIS
5.1(MARKING : Country of manufacture; )	-	60	5% discount for BIS
5.1(MARKING : Lamp designation )	-	60	5% discount for BIS
5.1(MARKING : Rated voltage or voltage range. )	-	60	5% discount for BIS
5.1.1(MARKING)	-	60	5% discount for BIS
6(LAMP CAPS )	-	700	5% discount for BIS
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	3000	5% discount for BIS
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	3000	5% discount for BIS
7.3.1(Lamp Worm-Up Test)	-	3000	5% discount for BIS
7.3.2(Lamp Worm-Up Test)	-	3000	5% discount for BIS
7.4.1(Lamp Electrical Characteristics : Ageing)	-	3000	5% discount for BIS
7.4.2(Lamp Electrical Characteristics : Ageing)	-	3000	5% discount for BIS
8.1(Open Circuit Voltage)	-	5000	5% discount for BIS
8.2.1(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.2(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.3(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.4.1(Starting Pulse Characteristics : General guidance)	-	420	5% discount for BIS
8.2.4.3(Starting Pulse Characteristics : General guidance)	-	420	5% discount for BIS
8.3(Lamp Warm-Up Current )	-	5000	5% discount for BIS
8.4(Current Crest Factor )	-	5000	5% discount for BIS
9.1(Voltage Increase at Lamp Terminals)	-	8330	5% discount for BIS
9.2(Lamp Envelope Temperatures )	-	8330	5% discount for BIS
9.3(Permissible Cap Temperatures )	-	8340	5% discount for BIS
10.1(5 000 hours operation, )	-	11000	5% discount for BIS
10.2(Life Test)	-	11000	5% discount for BIS
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	11000	5% discount for BIS
11.1( General Conditions )	-	50	5% discount for BIS
11.2(Mechanical, Physical and Marking Requirements )	-	50	5% discount for BIS
11.3.1( Lamp Starting, Warm-up and Electrical Characteristica )	-	50	5% discount for BIS
11.4(Lumen Maintenmce)	-	50	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 1709 (1984)

Specification for capacitors or electric fan motors (First Revision)

245000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Rated Voltage)	-	40	5% discount for BIS
4.2(Rated Frequency)	-	40	5% discount for BIS
4.2(Ambient Air Temp.)	-	40	5% discount for BIS
4.2(Capacitance)	-	40	5% discount for BIS
4.2(Capacitor)	-	40	5% discount for BIS
Cl. 5.1(Capacitor)	-	100	5% discount for BIS
Cl. 5.2(Capacitor)	-	150	5% discount for BIS
Cl. 5.3(Capacitor)	-	150	5% discount for BIS
Cl. 5.4(Capacitor)	-	150	5% discount for BIS
Cl 5.5(Capacitor)	-	150	5% discount for BIS
Cl. 5.6(Capacitor)	-	150	5% discount for BIS
Cl. 5.7(Capacitor)	-	150	5% discount for BIS
a(ISS 1709 : 1984)	-	100	5% discount for BIS
b(Manufacturers name or trade-mark and Serial number)	-	100	5% discount for BIS
c(Rated Voltage)	-	100	5% discount for BIS
d(Rated frequency)	-	100	5% discount for BIS
e(Rated Capacitance)	-	100	5% discount for BIS
f(Rated anbient Temperature)	-	100	5% discount for BIS
Cl. 6.2(Product may also be marked with standard mark.)	-	100	5% discount for BIS
Cl. 7.2(The capcitors shall be visually examined for finish and marking)	-	400	5% discount for BIS
Cl. 7.3.1(Insualtion Resistance between terminal and container)	-	3750	5% discount for BIS
Cl. 7.3.2(Insulation Resistance between terminals)	-	3750	5% discount for BIS
Cl. 7.4.1(Capacitors shall be subjected to an ac voltage test as specified in Table 2.)	-	3000	5% discount for BIS
Cl. 7.4.2(Capacitors shall be subjected for 10sec to a test between terminals and metal foil wrapped tightly around the surface of the container with s sinusoidal test voltages. Test Voltage:2000Vrms for 10sec During the test, no dielectric breakdown or flashover shall occur. )	-	3000	5% discount for BIS
Cl. 7.5(Capacitance measured at rated frequency and rated voltage.)	-	10000	5% discount for BIS
Cl.7.6(Tangent of Loss Angle measured at rated frequency and rated voltage. The maximum value of the tangent of loss angle for Self-healing MPP Type.)	-	6000	5% discount for BIS
Cl. 7.7(A weight of 2kg shall be suspended freely from each one of them in turn for a period of 10 sec. There shall be no damage to the capacitor or termination after this loading.)	-	2500	5% discount for BIS
Cl 7.8(Each termination shall withstand two consecutive bends as specified without damage to the capacitors)	-	2500	5% discount for BIS
Cl 7.9(Soldering tags shall withstand two consecutive cycles of bending as specified without damage to the capacitors.)	-	3000	5% discount for BIS
Cl. 7.10(There shall be no damage to the capacitors when the torque is applied to the nuts and screws of threaded terminations:)	-	1500	5% discount for BIS
Cl. 7.11(The capacitor shall be not suffer any damage when the specified soldering iron is applied to the termination of 15 sec.)	-	3200	5% discount for BIS
Cl. 7.12(Unenergized capacitor units kept in a position most likely to reveal leakage and heated throughout so that all parts of the container reach the temperature 5ºC higher the maximum operating temperature value. Total heating and cooling cycle time shall be 8 hours. After the sealing test No leakage shall occure.)	-	27500	5% discount for BIS
Cl. 7.13(Capacitance)	-	10500	5% discount for BIS
Cl. 7.13(Change in capacitance at 70°C as compare to 27°C. (Limit: 5%Max.) )	-	10500	5% discount for BIS
Cl. 7.13(Change in capacitance at 0°C as compare to 27°C. (Limit: 3%Max.) )	-	10500	5% discount for BIS
Cl. 7.14.1(Before test capacitance shall be measured. Th capacitor shall be subjected for 10 seconds to an ac voltage of 1.5 ti9mes the rated voltage. If rewer than five breakdown occure during the time, The voltage shall be increased slowly until five breakdown occured until voltage occured 3.5 times the rated voltage. voltage reduced to 0.8 times, no breakdown is permitted after decreased of voltage.)	-	5900	5% discount for BIS
Cl. 7.14.2(If only one or no breakdown has occurred since begning of the test when voltage has reached 3.5 times the rated voltage, the test shall be repeated on aonther identical capacitor.)	-	5800	5% discount for BIS
Cl.7.14.3(Before and after the test,the cpacitance shall be measured, A chage not greater than 0.3 %in its value shall be allowec.)	-	5800	5% discount for BIS
Cl. 7.15(After the test Capcitance variation)	-	50000	5% discount for BIS
Cl. 7.16(The capacitors are mounted in a air circulated test chamber as specified and capacitors are energized at test voltage 1.25UN for 500hr Continuously at 50Hz. During the test no permanent breskdown,intertuption or flashover shall occure.)	-	12400	5% discount for BIS
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and then capacitance shall be measured.)	-	12400	5% discount for BIS
Cl. 7.16(Change in capacitance, (Limit: 5%Max.) )	-	12400	5% discount for BIS
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and the tangent of loss angle shall be then measured. )	-	12400	5% discount for BIS
Cl. 7.16(Change in Tangent of Loss angle, (Limit: ----) )	-	12400	5% discount for BIS
Cl. 7.17(The capacitor sample was mounted in a circulating air oven maintained at a temperature 10ºC above the maximum operating temperature as specified without energizing. Capacitor energized at 1.4 times rated voltage by applying test voltage between terminal for 1 h, then 1.6 times rated voltage for 1 h, then 1.8 times rated voltage for 1 h, then 2.0 times rated voltage for 1 h then switch off. Then 2.0 times the rated voltage for an 8 h period each in four cycles of 24h. After completion of the test, the capacito is consider to have passe destruction test if a) Current through it has not been interruped by the delayed action test circuit fuse or by any internal fuse. b) The currnt through it has been interrputed without any harmful effect occurring. c)Three delayed action test ciucuit fuse have cleared without any hamfu effect occurring.d) The endurance is entact at the end of test e) The test voltage between terminals and container is passed at the end of the test.)	-	22000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

- View breakup
Rs.14500/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

- View breakup
Rs.12500/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Copper purity test subcontracted to BTH Wazirpur

IS 5790 (1985)

Specification for domestic electric cooking ovens (First Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	450	5% discount for BIS
6(Classification)	-	450	5% discount for BIS
7(Marking)	-	500	5% discount for BIS
8(Protection against Access to Live Parts)	-	2500	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	20	5% discount for BIS
10(Power Input & Current)	-	3000	5% discount for BIS
11(Temperature Rise/ Heating)	-	4000	5% discount for BIS
12(Operation under overload condition of appliances with heating element)	-	100	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature)	-	2500	5% discount for BIS
14(Radio and Television Interference Suppressions/ Transient Over Voltage)	-	3000	5% discount for BIS
15(Moisture Resistance)	-	3000	5% discount for BIS
16(Insulation Resistance and Electric Strength (After Humidity Treatment)/ Leakage Current and Electric Strength)	-	2500	5% discount for BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	5% discount for BIS
18(Endurance)	-	6500	5% discount for BIS
19(Abnormal Operation)	-	4500	5% discount for BIS
20(Stability & Mechanical Hazards)	-	3500	5% discount for BIS
21(Mechanical strength)	-	2500	5% discount for BIS
22(Construction)	-	4500	5% discount for BIS
23(Internal wiring)	-	2000	5% discount for BIS
24(Components)	-	200	5% discount for BIS
25(Supply Connection & External Flexible Cords)	-	2000	5% discount for BIS
26(Terminals For External Conductors)	-	1500	5% discount for BIS
27(Provision For Earthing)	-	2000	5% discount for BIS
28(Screws & Connections)	-	1800	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1800	5% discount for BIS
30(Resistance to Heat & Fire)	-	3500	5% discount for BIS
31(Resistance to Rusting)	-	3000	5% discount for BIS
32(Radiation ,Toxicity and similar hazards)	-	4000	5% discount for BIS
33(Finish)	-	500	5% discount for BIS
101(Heating Up Time)	-	4000	5% discount for BIS
102(Heat Losses)	-	4500	5% discount for BIS
103(Uniformity of Temperature)	-	4500	5% discount for BIS
104(Thermostat setting and differential (For automatic ovens only))	-	4200	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
2.1.1(Type and Desiganation)	-	100	5% discount for BIS
2.1.2(Type and Desiganation)	-	100	5% discount for BIS
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	100	5% discount for BIS
2.1.1(Type and Desiganation)	-	100	5% discount for BIS
2.1.2(Type and Desiganation)	-	100	5% discount for BIS
4.1(Performance Requirments)	-	1700	5% discount for BIS
4.2(Performance Requirments)	-	2000	5% discount for BIS
4.3(Performance Requirments)	-	2000	5% discount for BIS
4.4(Performance Requirments)	-	1200	5% discount for BIS
4.5(Performance Requirments)	-	2900	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.8(Stability to accelerated ageing )	-	17000	5% discount for BIS
4.9(Insulation resistance test)	-	500	5% discount for BIS
4.1(Performance Requirments)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1700	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.8(Stability to accelerated ageing )	-	17000	5% discount for BIS

Complete

31 Dec, 2023

-
-

IS 12449 : Part 1 (1988)

Specification For starting devices (Other Than Glow Starters) : Part 1 general and safety requirements

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	250	5% discount for BIS
5(Classification )	-	250	5% discount for BIS
7(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
8(Terminals)	-	1000	5% discount for BIS
9(Provisions for protective earthing)	-	1000	5% discount for BIS
10(Construction)	-	1500	5% discount for BIS
11(Resistance to dust and moisture)	-	8000	5% discount for BIS
12(Insulation resistance and Electric strength)	-	10000	5% discount for BIS
13(Fault Conditions)	-	3000	5% discount for BIS
14(Heating of independent starting Devices)	-	7000	5% discount for BIS
15(Pulse Voltage of Ignitors)	-	2500	5% discount for BIS
16(Mechanical Strength)	-	5000	5% discount for BIS
17(Screws, current-carrying parts and Connections)	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
19(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
20(Resistance to Corrosion)	-	5000	5% discount for BIS

Complete

31 Dec, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 781 Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131001

9810562215 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found