BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd.

B-140, Phase-2, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

8588840612 [email protected]

Scope List

Reset

10 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13995 (1995)

Unlined moulded rubber boots - Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Thickness )	-	1000	-
5.1.1(Tensile Strength (before ageing))	-	1000	-
5.1.2(Tensile Strength (after ageing))	-	1000	-
5.1.3(Tear Strength)	-	1000	-
5.1.4(Resistance to dry heat ageing )	-	1000	-
5.1.5(Flexing resistance of upper)	-	1000	-
5.1.6(Design)	-	500	-
5.1.7(Size)	-	500	-

Complete

-
-

IS 13893 (1994)

Polyurethane soles semirigid - specification

4850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Design)	-	500	-
4.2(Thickness )	-	500	-
4.3(Relative density )	-	600	-
4.3(Hardness Shore(A))	-	550	-
4.3(Tensile Strength )	-	500	-
4.3(Elongation at break)	-	500	-
4.3(Abrasion Resistance)	-	500	-
4.3(Flexural strength )	-	500	-
4.3(Ross Flex test)	-	500	-
4.3.2(Ageing test)	-	100	-
5, 5.1, 5.2(Packing And Marking)	-	100	-

Complete

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

8750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Shape & Design)	-	500	-
5.3(Thickness )	-	500	-
5.4(Relative density)	-	500	-
5.4(Hardness (Shore A))	-	500	-
5.4(Compression set)	-	550	-
5.4(Split tear strength )	-	500	-
5.4(Shrinkage test (at room temp))	-	500	-
5.4(Shrinkage test (at 100 C temp))	-	500	-
5.4(Relative density )	-	500	-
5.4(Tensile Strength )	-	500	-
5.4(Elongation at break )	-	500	-
5.4(Breaking strength )	-	500	-
5.4(Hardness (Shore A))	-	500	-
5.4(Hardness (shore A)- after ageing)	-	500	-
5.4(Tear strength )	-	500	-
5.4(Stud diameter)	-	500	-
5.4(Stud bolt)	-	500	-
6, 6.1, 6.2(Marking and packing)	-	200	-

Complete

-
-

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(REQUIREMENTS-General)	-	1500	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	1500	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	1500	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	1500	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	1000	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	1500	-
6(Marking and packing)	-	500	-

Complete

-
-

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance)	-	500	-
4.2(Size & Thickness )	-	500	-
4.2(Hardness (Shore A))	-	500	-
4.2(Compression set)	-	500	-
4.2(Split tear strength)	-	400	-
4.2(Shrinkage at room temp)	-	500	-
4.2(Heat Shrinkage )	-	500	-
4.2(Water absorption)	-	500	-
4.2(Flexing resistance )	-	500	-
5, 5.1(Marking)	-	100	-
6, 6.1(Packing)	-	100	-

Complete

-
-

IS 15844 (2010)

Sports Footwear Specification

25550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Design )	-	500	-
3.2.2(Mass of pairs )	-	500	-
3.2.3 & 3.2.4(Visual )	-	500	-
3.3.1(Contruction)	-	500	-
3.3.2(Upper/outsole bond strength)	-	500	-
3.3.3(Sole /midsole bond strength )	-	500	-
3.3.4(Energy absorption of seat region )	-	500	-
3.4(Upper flexing resistance )	-	500	-
3.4(Hydrolysis )	-	500	-
3.4(Adhesive Strength )	-	500	-
3.4(Tensile Strength)	-	1000	-
3.4(Elongation at Break )	-	500	-
3.4(Tear Strength)	-	500	-
3.4(Colour fastness to crocking )	-	500	-
3.4(Colorfastness to light )	-	500	-
3.5(Tensile Strength)	-	500	-
3.5(Elongation at Break )	-	500	-
3.5(Split tear strength )	-	500	-
3.5(Die-C tear Strength )	-	500	-
3.5(Compression set )	-	500	-
3.5(Adhesive to sole)	-	500	-
3.5(Heat resistance tester )	-	500	-
3.6(Trouser tear strength )	-	500	-
3.6(Die-C tear Strength )	-	500	-
3.6(Abrasion resistance )	-	500	-
3.6(Adhesion to mid sole )	-	500	-
3.6(Ross flexing )	-	500	-
3.7(Tensile Strength)	-	500	-
3.7(Water absorption & loss percent )	-	500	-
3.7(Abrasion resistance )	-	500	-
3.7(Flexing index)	-	500	-
3.8(Tensile Strength)	-	500	-
3.8(Elongation at Break )	-	500	-
3.8(Die-C tear Strength )	-	500	-
3.8(Compression set )	-	500	-
3.8(Heat resistance tester )	-	500	-
3.9(Breaking Strength )	-	500	-
3.9(Colour fastness to rubbing )	-	500	-
3.9(Strength of shoe lace tags )	-	500	-
3.9(Lace abrasion test)	-	550	-
3.10(Crush load )	-	500	-
3.10(Collapsing load )	-	500	-
3.10(Shape retention percent )	-	500	-
3.11(Corrosion resistance)	-	500	-
Cl. 3.11 Table 16 A-3.4 of IS 7554 ii)(Resilience, percent, Min)	-	500	-
Cl. 3.11 Table 16 A-3.5 of IS 7554 iii)(Moisture resistance, percent, Min)	-	500	-
Cl. 3.11 Table 16 iv) a)A-3.1 of IS 7554(Initial dry area shape retention, percent, Min)	-	500	-
3.10(Ross Flex test)	-	500	-
Cl. 3.11 Table 16 iv) b) A-3.3 of IS 7554(Area shape retention after 10th collapse, dry, percent, Min)	-	500	-
Cl. 3.11 Table 16,\ Annex B of IS 7554 v)(Peel strength, N/cm, Min)	-	500	-

Complete

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	-
5(General Safety Considerations)	-	1000	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	2000	-
5.6(Assembly of Cells into batteries)	-	2000	-
5.7(Quality Plan)	-	2000	-
5.8(Battery Safety Components)	-	2000	-
6(Tyoe Test amd Sample Size)	-	1000	-
7(Specific requirements and tests)	-	5000	-
7.1(Charging procedure for test purposes)	-	5000	-
7.2(Intended Use)	-	19000	-
7.3(Reasonably foreseeable misuse)	-	21000	-
8(Information for safety)	-	3000	-
8.1(General)	-	500	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	500	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	2000	-
9.4(Other information)	-	2000	-
10(Packaging)	-	2000	-

Complete

-
-

IS 16046 : Part 1 (2018)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1500	-
5(General Safety Considerations)	-	500	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	2000	-
5.7(Quality Plan)	-	500	-
6(Tyoe Test amd Sample Size)	-	1500	-
7(Specific requirements and tests)	-	2000	-
7.1(Charging procedure for test purposes)	-	2000	-
7.2(Intended Use)	-	32500	-
7.3(Reasonably foreseeable misuse)	-	21000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	1000	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	1000	-

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	200	N/A
1.6(Power interface .)	-	5900	Cl.1.6 Power interface & Cl.1.6.1 AC Power Distribution System 500 Cl.1.6.2 Input Current 5000 Cl.1.6.3 Voltage limit of hand-held Equipment 200 Cl.1.6.4 Neutral Conductor 200
1.7(Markings and instructions)	-	1100	i) Cl.1.7 to xv) Cl.1.7.14
2.1(Protection from electric shock and energy hazards)	-	2400	Cl. 2 to Cl.2.1.3
2.2(SELV circuits)	-	200	Cl.2.2, Cl.2.2.1, Cl.2.2.2, Cl.2.2.3, & Cl.2.2.4, SELV Circuits 200
2.3(TNV circuits)	-	200	N/A
2.4(Limited current circuits)	-	1000	Cl.2.4, Cl.2.4.1, Cl.2.4.2, & Cl.2.4.3, Limited Current circuits 1000
2.5(Limited power sources .)	-	1000	Cl.2.5, Limited power sources 1000
2.6(Provisions for earthing and bonding)	-	3200	Cl.2.6 to Cl.2.6.5.8
2.7(Overcurrent and earth fault protection in primary circuits)	-	1400	Cl.2.7 to Cl.2.7.6
2.8(Safety interlocks)	-	200	N/A
2.9(Electrical insulation)	-	800	Cl.2.9 Electric insulation 200 Cl.2.9.1 & Cl.2.9.2 Properties of Insulating materials, Humidity Conditioning. 200 Cl.2.9.3 Grade of insulation 200 Cl.2.9.4 Separation from Hazardous voltages 200
2.10(Clearances, creepage distances and distances through insulation)	-	5800	Cl.2.10 to Cl.2.10.10
3.1(General)	-	1400	Cl.3,Cl.3.1,Cl.3.1.1,&Cl.3.1.1 to Cl.3.1.10
3.2(Connection to a mains supply)	-	1600	Cl. 3.2, Cl.3.2.1,& Cl.3.2..1.1,Cl.3.2.1.2 to Cl.3.2.9
3.3(Wiring terminals for connection of external conductors)	-	600	Cl.3.3 to Cl.3.3.8
3.4(Disconnection from the mains supply)	-	200	Cl.3.4 , Disconnection from the mains supply 200
3.5(Interconnection of equipment)	-	200	Cl.3.5 Interconnection of Equipments 200
4.1(Stability)	-	200	Cl.4 Physical Requirements, Cl.4.1 Stability 200
4.2(Mechanical strength)	-	1000	Cl.4.2 to Cl.4.2.10
4.3(Design and construction)	-	1400	Cl.4.3 to Cl.4.3.13.5
4.4(Protection against hazardous moving parts)	-	200	Cl.4.4 Protection against Hazardous Moving Parts 200
4.5(Thermal requirements)	-	400	Cl.4.5 Cl.4.5.1 Cl.4.5.2 Cl.4.5.3 Cl.4.5. Thermal Requirements General Temperature Test Temperature limits for Materials 4 Touch Temperature Limits 200 Cl.4.5.5 Resistance to abnormal Heat 200
4.6(Openings in enclosures)	-	600	Cl.4.6,Cl.4.6.1, & Cl.4.6.3 Openings in enclosures 200 Cl.4.6.4 Openings in transportable equipment 200 Cl.4.6.5 Adhesives for constructional purposes 200
4.7(Resistance to fire)	-	1800	Cl.4.7 to Cl.4.7.3.6
5.1(Touch current and protective conductor curren)	-	200	Cl.5, & Cl.5.1 Electrical Requirements and simulated abnormal conditions & Touch current and protective conductor current & Annex D 200
5.2(Electric strength)	-	1000	Cl.5.2 Electric Strength Test 1000
5.3(Abnormal operating and fault conditions)	-	1200	Cl.5.3, Cl.5.3.1 to Cl.5.3.9.2
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2600	Cl.6.0 to Cl.6.1.2.2
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	600	Cl.6.2 to Cl.6.2.2.2 & Cl.6.2.2.3
6.3(Protection of the telecommunication wiring system from overheating)	-	200	Cl.6.3 Protection of the telecommunication wiring system from overheating 200
7.1(General)	-	200	Cl.7,& Cl.7.1 Connection to cable distribution system,& General 200
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	Cl.7.2 Protection of cable distribution system service persons, and user of other equipment connected to the system ,from hazardous voltage in the equipment 200
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	Cl.7.3 Protection of equipment users from over voltages on the cable distribution system 200
7.4(Insulation between primary circuits and cable distribution systems)	-	600	Cl.7.4 & Cl.7.4.1 Insulation between primary circuits and cable distribution system and General 200 Cl.7.4.2 Voltage Surge Test 200 Cl.7.4.3 Impulse Test 200

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	Cl.5 Marking and Instructions 500 Cl.5.1 Identification and supply ratings 500 Cl.5.2 Terminals 500 Cl.5.3 to Cl.5.5 Instructions 500
7(Heating under normal operating conditions)	-	3000	Cl.7 & Cl.7.1 Heating under Normal operating Conditions & General 500 Cl.7.2 Heat resistance of insulating material 500
8(Constructional requirements with regard to the protection against electric shock)	-	5000	Cl.8 & Cl.8.1 to Cl.8.21
9(Electric shock hazard under normal operating conditions)	-	4000	Cl.9 ,cl.9.1 & Cl.9.1.2 to Cl.9.2
10(Insulation requirements)	-	3000	Cl.10 & Cl.10.1 Insulation requirements 500 Cl.10.2 Surge test 500 10.3 Humidity treatment 500 Cl.10.4 Insulation resistance and dielectric strength 500
11(Fault conditions)	-	3000	Cl.11 Fault conditions 500 Cl.11.1 Electric shock hazard 500 Cl.11.2 Heating 500 x 3=1500
12(Mechanical strength)	-	6000	Cl.12 to Cl.12.1.3 & Cl.12.6 , Cl.12.7
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	Cl.13 & Cl.13.1 to Cl.13.7
14(Components)	-	500	Cl.14 Components 500
15(TERMINALS)	-	2500	Cl.15 Terminals 500 Cl.15.1 Plug & Sockets 500 Cl.15.2 Provisions for protective earthling 500 Cl.15.3 Terminals for external flexible cords and for permanent connection to the mains 500 Cl.15.4 Device forming a part of mains plug 500
16(External flexible cords)	-	1000	Cl.16 External Flexible cords 500
17(Electrical connections and mechanical fixings)	-	2500	Cl.17 & Cl.17.1 Electrical connections and mechanical fixings 500 Cl.17.2 500 Cl.17.3 500 Cl.17.4,Cl.17.5, Cl.17.6 500 Cl.17.7,Cl.17.8, Cl.17.9 500
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	1000	Cl.18 Mechanical Strength of picture tubes and protection against the effect of implosion 500
19(Stability and mechanical hazards)	-	2500	Cl.19 Stability and mechanical hazards 2500
20(Resistance to fire)	-	3000	CL.20 Resistance to fire, Electrical Components and mechanical parts, Fire enclosure 2500
4(General test conditions)	-	1000	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd.

B-140, Phase-2, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

8588840612 [email protected]

Scope List