BIS - LIMS (Laboratory Information Management System)

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

- [email protected]

Scope List

Reset

145 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7532 (2018)

Soft soap - Specification (First RevisIon)

TYPE 1 AND 2

14100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description, IS 7532)	-	500	30% DISCOUNT
4.3(Consistency, IS 286)	-	650	30% DISCOUNT
4.5, Table-1 (i) Type-1(Total fatty matter, IS 286)	-	950	30% DISCOUNT
5.2(5.2 The material shall quickly form a satisfactory lather while in use and shall show no sign of any deterioration on storage in original sealed containers under normal conditions for a period of 12 months.)	-	6000	30% DISCOUNT
Table1(ii) IS.no 286 CL12(Unsaponified and Unsaponified matter (Type 2 ))	-	1500	30% DISCOUNT
Table-1 (iii) IS.no 286 CL 14(Rosin acids percent by mass of total fatty matter ( Type 2))	-	1500	30% DISCOUNT
Table-1 (iv) IS.no 286 Annex A(Total free alkali ( as K2O ) type 2)	-	1500	30% DISCOUNT
4.5, Table-1 (v) Type-1 & Type-2(Free caustic alkali (as K2O), IS 286)	-	1500	30% DISCOUNT

Complete

31 Dec, 2023

-
-

IS 8291 (1976)

Specification for phenthoate emulsifiable concentrates

3675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	300	-
2.3.1(Phenthoate Content)	-	1500	-
2.3.2(Acidity/Alkalinity)	-	500	-
2.2.2(Cold Test)	-	400	-
2.2.3(Flash Point)	-	500	-
2.2.4(Emulsion Stability)	-	475	-

Complete

31 Dec, 2023

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	2000	LESS 30% REBATE
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1500	LESS 30% REBATE
16.4(Flammability Test)	-	2000	LESS 30% REBATE
15.1 d)6)(Heat shock test- Insulation )	-	500	LESS 30% REBATE
15.1 d)6)(Heat shock test- sheath )	-	500	LESS 30% REBATE
16.5(Oxygen Index Test)	-	2500	LESS 30% REBATE
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2000	LESS 30% REBATE
15.1 d)5)( Loss of mass in air oven- sheath )	-	2000	LESS 30% REBATE
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	250	LESS 30% REBATE
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	250	LESS 30% REBATE
9.2(INSULATION : Thickness of Insulation)	-	250	LESS 30% REBATE
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	LESS 30% REBATE
15.1 g)(High voltage test at room temperature)	-	2500	LESS 30% REBATE
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	2500	LESS 30% REBATE
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	LESS 30% REBATE
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	LESS 30% REBATE
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	750	LESS 30% REBATE
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	750	LESS 30% REBATE
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	500	LESS 30% REBATE
15.1 d)4)(Hot deformation : Insulation )	-	750	LESS 30% REBATE
15.1 d)4)(Hot deformation : Sheath )	-	750	LESS 30% REBATE
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	2000	LESS 30% REBATE
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	750	LESS 30% REBATE
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	750	LESS 30% REBATE
16.1(Temperature Index)	-	7500	LESS 30% REBATE
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	LESS 30% REBATE
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	LESS 30% REBATE
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1500	LESS 30% REBATE
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	LESS 30% REBATE
15.1 d)1)(Physical tests for sheath : Elongation )	-	500	LESS 30% REBATE
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	LESS 30% REBATE
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	LESS 30% REBATE
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	750	LESS 30% REBATE
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	750	LESS 30% REBATE
13.6 a)(ARMOURING: Tensile Strength)	-	750	LESS 30% REBATE
13.6 b)(ARMOURING: Elongation )	-	750	LESS 30% REBATE
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	2000	LESS 30% REBATE
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	LESS 30% REBATE
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	LESS 30% REBATE
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	LESS 30% REBATE
13.6 g)(ARMOURING: Resistivity)	-	2000	LESS 30% REBATE
15.1 d)7)(Thermal stability- insulation )	-	900	LESS 30% REBATE
15.1 d)7)(Thermal stability- Sheath )	-	900	LESS 30% REBATE
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	LESS 30% REBATE
16.9(Test for Halogen Acid Gas Evolution)	-	2500	LESS 30% REBATE
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	LESS 30% REBATE
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	LESS 30% REBATE
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	LESS 30% REBATE
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	LESS 30% REBATE

Complete

31 Dec, 2023

-
-

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & finish - IS 2202(Pt-1))	-	-	-
11.1( Squareness Test - IS 4020 (Pt-2))	-	-	-
11.1(Thickness - IS 4020 (Pt-2))	-	-	-
11.1(Width- IS 4020 (Pt-2))	-	-	-
11.1(Height - IS 4020 (Pt-2))	-	-	-
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	-	-
11.3(Depth of deviation - IS 4020(Pt-4))	-	-	-
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	-	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	-	-
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	-	-
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	-	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	-	-
11.8(Buckling Test - IS 4020(Pt-9))	-	-	-
11.9(Slamming Test - IS 4020(Pt-10))	-	-	-
11.1(Misuse Test - IS 4020(Pt-11))	-	-	-
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	-	-
11.12(End Immersion Test - IS 4020(Pt-13))	-	-	-
11.13(Knife Test - IS 4020(Pt-14))	-	-	-
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	-	-
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	-	-

Complete

31 Dec, 2023

-
-

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5 and IS 5116 .Surface of Glass Or Glass Ceramic(IS 5116)	-	-	-
4.1.1(General)	-	-	-
6.1(Mechanical (Design for Maintenance))	-	-	-
7(Rigidity and Stability)	-	-	-
8.1 (7.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	-	-
11.1 (10.5 of IS 5116)(Mechanical (Burners))	-	-	-
10 (9.1.1 of IS 5116)(Mechanical (Injector Jets))	-	-	-
14.1 (18.1 of IS 5116)(Mechanical (Gas Inlet Connection))	-	-	-
13.2.1(Mechanical (Gas Soundness))	-	-	-
12.1(Mechanical (Pan Support))	-	-	-
15 (Annex - C)(Strength and Rigidity)	-	-	-
17.1(Gas Consumption)	-	-	-
18.4 (14.1 of IS 5116)(Ignition and Flame travel)	-	-	-
19.1(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	-	-
25.1 ( 23.1 of IS 5116 )(Fire Hazard and Limiting Temperatures)	-	-	-
26(Thermal Efficiency)	-	-	-

Complete

31 Dec, 2023

-
-

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

MEDIUM, HEAVY, LIGHT

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	-	-
4.1(Sulphur %)	-	-	-
Cl. 6.1(Nominal Size)	-	-	-
Cl. 9.3, Table 4(Bend Test )	-	-	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	-	-

Complete

31 Dec, 2023

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

17367 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	800	LESS 30% REBATE
4.1(Annealing test (for copper))	-	750	LESS 30% REBATE
5.3(Thickness of Insulation)	-	250	LESS 30% REBATE
9.1(Ovality)	-	250	LESS 30% REBATE
10.4(Flammability test- Unaffected portion)	-	375	LESS 30% REBATE
10.4(Flammability test-Burning after flame removal)	-	375	LESS 30% REBATE
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	LESS 30% REBATE
10.1(HV (water immersion))	-	1500	LESS 30% REBATE
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	LESS 30% REBATE
table 1 e) 3) (IR constant- max. Temp)	-	400	LESS 30% REBATE
table 1 e) 3) (IR constant- Room temp )	-	300	LESS 30% REBATE
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	300	LESS 30% REBATE
10.5(Oxygen index)	-	750	LESS 30% REBATE
4.2(Conductor resistance test)	-	750	LESS 30% REBATE
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	200	LESS 30% REBATE
10.7(Temperature index)	-	1500	LESS 30% REBATE
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	750	LESS 30% REBATE
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	250	LESS 30% REBATE
Table 1 iii) c) 1)(Elongation (Without ageing))	-	250	LESS 30% REBATE
Table 1 iii) c) 3)(Elongation (After ageing))	-	750	LESS 30% REBATE
4.1(Tensile test (for Al)- After Stranding)	-	500	LESS 30% REBATE
10.6(Halogen evolution)	-	750	LESS 30% REBATE
10.8(Smoke density rating)	-	500	LESS 30% REBATE
4.1(Wrapping test (for Al))	-	500	LESS 30% REBATE
10.11(Persulphate Test )	-	500	LESS 30% REBATE
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	LESS 30% REBATE
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	LESS 30% REBATE
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1117	LESS 30% REBATE
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	LESS 30% REBATE

Complete

31 Dec, 2023

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

15000 View breakup
Rs.15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	7000	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	2000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-

Complete

31 Dec, 2023

-
-

IS 455 (2015)

Portland slag cement - Specification

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	1000	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	1000	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	1000	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	500	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	500	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	1650	LESS 30% REBATE
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	1650	LESS 30% REBATE
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	1800	LESS 30% REBATE
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	2000	LESS 30% REBATE
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	LESS 30% REBATE

Complete

31 Dec, 2023

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	LESS 30% REBATE
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	LESS 30% REBATE
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	LESS 30% REBATE
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	LESS 30% REBATE
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	LESS 30% REBATE
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	LESS 30% REBATE
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	4000	LESS 30% REBATE
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	2000	LESS 30% REBATE
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	LESS 30% REBATE

Complete

31 Dec, 2023

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

- View breakup
Rs.37,000/- With Radioactive elements, Rs.31,000/- Without Radioactive elements Rs.45,000/- Only for Packaging bottle per capacity (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	-	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	-	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	-	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	-	-
8.1(CE)	-	-	-
9.1(Tensile test-Yield Strength)	-	-	-
9.1(Tensile test- Elongation)	-	-	-
9.1(Tensile test-Strength)	-	-	-
9.2.3(Flattening Test for seamless pipes)	-	-	-
9.2.1(Flattening test for ERW pipes )	-	-	-
9.3(Guided Bend Test (for SAW Pipes))	-	-	-
11.1, Table 5.(Outside Diameter (OD))	-	-	-
12.3.3(Ovality)	-	-	-
12.5(Strightness)	-	-	-
14.1(Visual inspection, Appearance and Workmanship)	-	-	-

Complete

31 Dec, 2023

-
-

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Description)	-	-	-
Cl.4.5.1(Phenolic substances such as cresylic acid, if added)	-	-	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.i)(Total fatty matter)	-	-	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii)(Matter insoluble in alcohol)	-	-	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii)(Free caustic Alkali, as K2O)	-	-	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv)(Synthetic detergent)	-	-	-

Complete

31 Dec, 2023

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

4300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(General Requirement)	-	500	LESS 30% REBATE
6.3 Table 2 i (Moisture)	-	650	LESS 30% REBATE
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-	650	LESS 30% REBATE
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-	2500	LESS 30% REBATE

Complete

31 Dec, 2023

-
-

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

- View breakup
Rs.30000/- (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 3633 (2003)

Black tea - Specification (Second Revision)

- View breakup
Rs.10000/- (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 5982 (2003)

Plantation white sugar - Specification (First Revision)

- View breakup
Rs.15000/- (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Description)	-	1000	LESS 30 % DISCOUNT
Cl.4.3(Size (Mass of tablet))	-	1000	LESS 30 % DISCOUNT
Cl.4.4(Moisture (Annex B))	-	2000	LESS 30 % DISCOUNT
Cl.4.3(Available Chlorine (Annex A))	-	2500	LESS 30 % DISCOUNT
Clause 5(Shelf Life)	-	1000	LESS 30 % DISCOUNT

Complete

31 Dec, 2023

-
-

IS 1008 (2004)

Sugar boiled confectionery - Specification (Second Revision)

6750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table 2 i (Moisture.)	-	400	-
5.1(Description)	-	400	-
5.3 Table 1 i(Ash sulphated)	-	750	-
5.3 Table 1 ii(Acid Insoluble ash)	-	400	-
5.3 Table 2 iv (Sulphur dioxide)	-	700	-
5.3 Table 2 v (Reducing sugar (calculated as dextrose))	-	500	-
5.3 Table 2 vi (Sucrose)	-	500	-
5.3 Table 2 viii (Protein, (on dry basis))	-	500	-
5.3 Table 2 ix (Lactose, (on dry basis))	-	500	-
5.3 Table 1 iv(Arsenic)	-	500	-
5.3 Table 1 v(Lead)	-	400	-
5.3 Table 1 vi(Copper)	-	400	-
5.3 Table 1 vii(Zinc)	-	400	-
5.3 Table 1 viii(Tin)	-	400	-

Complete

31 Dec, 2023

-
-

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

- View breakup
Rs.12000/- (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Plain ended pipe only

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5, Table-1 (i), Grade-1(Total fatty matter, IS 286)	-	-	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 )	-	-	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	-	-
5.5, Table-1 (iv), Grade-1(Matter insoluble in alcohol, IS 286)	-	-	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286)	-	-	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali)	-	-	-
5.5, Table-1 (vii), Grade-1(Lather)	-	-	-

Complete

31 Dec, 2023

-
-

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	6000	30% DISCOUNT
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	1500	30% DISCOUNT
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	5000	30% DISCOUNT
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	2000	30% DISCOUNT
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	3200	30% DISCOUNT
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	2500	30% DISCOUNT
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	2500	30% DISCOUNT
7(Finish)	-	0	30% DISCOUNT
8.3(Dimensional Tolerances)	-	1000	30% DISCOUNT
9.2, 11.4(Moisture content)	-	1500	30% DISCOUNT
11.10(screw withdrawal strength)	-	4000	30% DISCOUNT

Complete

31 Dec, 2023

-
-

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	400	-
3.3.1(Chloropyrifos content)	-	2800	-
3.2.2(Cold Test)	-	500	-
3.2.3(Flash Point (Abel))	-	500	-
3.2.4(Emulsion Stability)	-	550	-
3.3.2(Acidity (as H2SO4), )	-	500	-

Complete

31 Dec, 2023

-
-

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 AND AS PER IS 7887(CARBON)	-	-	-
6 AND AS PER IS 7887(SULPHUR)	-	-	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	-	-
6 AND AS PER IS 7887(MANGANESE)	-	-	-
7 & 8(Diameter)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
9.2(Wrapping Test)	-	-	-
9.3(Bend test)	-	-	-
10(Finish)	-	-	-
11(Coating test)	-	-	-
13(Freedom from defects)	-	-	-

Complete

31 Dec, 2023

-
-

IS 3097 (2006)

Veneered Particle Boards -Specification

- View breakup
Rs.20000/- (30% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Particle Size)	-	-	-
Clause 4.3 Table 1(Moisture content)	-	-	-
Clause 4.3 Table 1(water insoluble matter)	-	-	-
Clause 4.3 Table 1(Chloride Content(as Nacl))	-	-	-
Clause 4.3 Table 1(Matter soluble in water other than sodium chloride)	-	-	-
Clause 4.3 Table 1(Calcium (as Ca))	-	-	-
Clause 4.3 Table 1(Magnesium (as mg))	-	-	-
Clause 4.3 Table 1(Sulphate (as SO4 ),)	-	-	-
Clause 4.3 Table 1(Iodine content, a) Manufacturers Level )	-	-	-
Clause 4.3 Table 1(Lead as (Pb))	-	-	-
Clause 4.3 Table 1(Arsenic(as As))	-	-	-
Clause 4.3 Table 1(Iron(as Fe))	-	-	-

Complete

31 Dec, 2023

-
-

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	LESS 30% DISCOUNT
3.3.1(Mancozeb Content)	-	4000	LESS 30% DISCOUNT
3.2.2(Sieving Requirement)	-	1000	LESS 30% DISCOUNT
3.2.3(Suspensibility)	-	1000	LESS 30% DISCOUNT
3.2.4(Wettability)	-	1000	LESS 30% DISCOUNT
3.3.2(Zinc Content)	-	1000	LESS 30% DISCOUNT
3.3.3(Manganese Content)	-	1000	LESS 30% DISCOUNT

Complete

31 Dec, 2023

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

- [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found