BIS - LIMS (Laboratory Information Management System)

Central institute of Petrochemicals Engineering & Technology, Raipur

Raipur, Raipur, Chhattisgarh, 493221

7008304951 [email protected]

Scope List

Reset

34 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

22067.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	250.00	Woven sack for packaging test charges 22067.50 + extra 18 % GST charges
5.2 Table 1(Dimensions)	-	250.00	-
5.2 Table 1(Dimensions)	-	250.00	-
5.2 Table 1(Dimensions)	-	250.00	-
5.2 Table 1(Dimensions)	-	250.00	-
5.2 Table 1(Picks per dm)	-	250.00	-
5.2 Table 1(Ends per dm)	-	250.00	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	250.00	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	12380	Average breaking strength charges 2200 .00+ UV exposure @ 192 hr. charges 10180.00
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	2200.00	Average breaking strength of after UV charges 2200 .00
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100.00	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	2200.00	-
5.2 Table 1(Drop impact strength)	-	1100.00	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	950.00	-

Complete

25 Apr, 2022

-
-

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

16069.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250.00	Pipe test charges 16068.78.00+ extra 18% GST charges clause no .10.8 of hydraulic test charges test charges 2700.00 clause no. 11.1 long term test charges 4800.00 & clause no.11.1.2 migration test charges 2325.00 Clause no.11.1.3 OIT charges 2200
10.1(Density )	-	500.00	-
10.6(Apparent tensile strength of pipe)	-	1600.00	Appearance tensile strength charges 1100.00+ Specimen preparation charges 500.00
10.7(minimum burst pressure)	-	1000.00	-
Clause 10.3 table 3(Carbon black content)	-	925.00	-

Complete

25 Apr, 2022

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

112057.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0.00	Pipe testing charges 107513 + Extra GST charges Material testing charges 4544+ Extra GST charges
Cl 7(Dimensions Of Pipes)	-	250.00	-
Cl 8(Visual Appearance)	-	300.00	-
Cl 9.1(Hydraulic Characteristics)	-	18400.00	Acceptance Test 20 oC /hr. Charges 1000.00 Acceptance Test 95 oC /22hr. Charges 1600.00 Type test charges 95 oC /165 hr.Charges 4800.00 Type test charges 95 oC /1000 hr.Charges 11000.00
Cl 9.2(Fusion Compatibility)	-	4800.00	Type test 95 oC /165 hr.
Cl 9.3(Reversion Test )	-	1000.00	Reversion test charges 1000 .00 + Specimen preparation charges 300.00
Cl 9.4 & Annex B(Impact Strength)	-	1400	Impact strength test charges 1100 .00 + Specimen preparation charges 300.00
Cl 9.5(Density)	-	500.00	-
Cl 9.6(Melt Flow Rate)	-	1100.00	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625.00	Carbon black content charges 925.00 + Carbon black dispersion charge 700.00
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825.00	Hydrostatic test charges 1700.00 + Conditioning test charges 82125.00
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	0.00	Hydraulic Test charges added to clause no. 9.1

Complete

25 Apr, 2022

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

3525.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300.00	3525.00 + Extra 18 % GST charges
7.2(Flow path in emitters)	-	300.00	-
7.3.1(Resistance to Hydrostatic pressure)	-	1000.00	-
7.3.2(Resistance to Hydrostatic pressure)	-	0.00	Resistance to hydrostatic pressure test charges added to clause no. 7.3.1
7.3.3(Resistance to Hydrostatic pressure)	-	0.00	Resistance to hydrostatic pressure test charges added to clause no. 7.3.1
7.4.1(Emitter Pull Out In-line emitters)	-	500.00	-
7.4.2(Emitter Pull Out On-line emitters)	-	500.00	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000.00	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000.00	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000.00	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	-
8.3(Determination of Emitter Exponent)	-	600.00	-

Complete

25 Apr, 2022

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

9056.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	925.00	9056 & Extra 18 % GST
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500.00	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700.00	-
6.2.2(Fittings)	-	0.00	All dimension test Charges Added to clause No. 8.3.1
6.3(General)	-	300.00	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000.00	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000.00	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000.00	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	1000.00	-
8.2.2(Regulated Emitting Pipes)	-	1000.00	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	250.00	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0.00	All dimension test Charges Added to clause No. 8.3.1
8.3.3(Flow Paths in Emitting Unit)	-	400	-
8.3.4(Spacing ofEmitter Units)	-	0.00	Flow path emitting units & spacing test Charges Added to clause No. 8.3.3
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1600	-
8.5(Resistance to Tension at Elevated Temperature)	-	1100.00	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400.00	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2800.00	1200 of Acceptance Test (77 oC/ hr. ) 1600 of Type test (77 oC/ 48 hr. )
8.8(Determination of Emitting Unit Exponent)	-	600.00	-

Complete

25 Apr, 2022

-
-

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

701300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300.00	( up to 63mm dia. test charges 345125.00 + Extra 18 % GST Charges & Above 63 mm dia . Charges 356175.00 + Extra 18 % GST Charges )
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500.00	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100.00	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200.00	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250.00	Condensate and stand i n air for 1500 hr . Charges 1000.00 & Specimen preparation charges 4000.00 After Conditioning hydro hydraulic at 20 hr. charges 1000.00 & Specimen preparation charges 250.00
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600.00	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	300.00	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	200.00	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	300.00	-
6.4(Length of pipe)	-	200.00	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	300.00	-
8.1(Hydraulic Charactristics, Annex-A)	-	20300.00	Hydraulic Characteristic 165 hr .Charges 4800.00 & specimen charges 250.00 100 hr. charges 4000.00 1000 hr. Charges 11000.00 & Specimen charges 250.00
8.2(Reversion Test. Annex-C)	-	700.00	-
8.3(Density, Annex A of IS 7328)	-	500.00	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100.00	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200.00	-
8.7(Tensile yield strength, Annex-J)	-	1250.00	Tensile Strength charges 1100.00 & Specimen Charges 250.00
8.7(Elongation at break, Annex-J)	-	1250.00	Elongation at break charges 1100.00 & Specimen Charges 250.00
8.8(Resistance to Weathering, Annex-F)	-	12800.00	Weathering charges at 6 month 9000.00 Elongation at break 1100.00 & specimen charges 250.00 OIT charges 2200.00
8.9(Squeeze off, Annex-G)	-	1300.00	-

Complete

25 Apr, 2022

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

8606 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Testing Charges are Excluding GST PVC Resin Testing Charge : 3075 Extra
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	Testing Charges are Excluding GST
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	Testing Charges are Excluding GST
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	Testing Charges are Excluding GST
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	Testing Charges are Excluding GST
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Testing Charges are Excluding GST
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Testing Charges are Excluding GST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Testing Charges are Excluding GST
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Testing Charges are Excluding GST
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	Testing Charges are Excluding GST
11.2(Resistance to External Blows at 0°C)	-	1000	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	Testing Charges are Excluding GST
Clause 10.7(Sulphated Ash Content)	-	950	Testing Charges are Excluding GST
9.1(PIPE ENDS)	-	500	Testing Charges are Excluding GST
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Testing Charges are Excluding GST
8(SEALING RINGS)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-

Complete

25 Apr, 2022

-
-

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

249719 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	Testing Charges are Excluding GST
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	Testing Charges are Excluding GST
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	Testing Charges are Excluding GST
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	Testing Charges are Excluding GST
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	Testing Charges are Excluding GST
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	Testing Charges are Excluding GST
9.6 IS 12235(Part 14)(Density)	-	500	Testing Charges are Excluding GST
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	Testing Charges are Excluding GST
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	Testing Charges are Excluding GST
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	Testing Charges are Excluding GST
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	Testing Charges are Excluding GST
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	Testing Charges are Excluding GST
10.4 IS 12235(Part 19)(Flattening Test)	-	500	Testing Charges are Excluding GST
7.1.3 (Effective length)	-	500	Testing Charges are Excluding GST
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	Testing Charges are Excluding GST
9.1(Visual Appearance)	-	300	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

34981 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.3.1.1(Weldability Test)	-	1600	Testing Charges are Excluding GST
6.1.3, 6.1.3.1(Weldability Test)	-	4800	Testing Charges are Excluding GST
6.1.2.2( Hydraulic Proof Test)	-	850	Testing Charges are Excluding GST
6.1.1, 6.1.1.1(Leakage Test)	-	850	Testing Charges are Excluding GST
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	Testing Charges are Excluding GST
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	500	Testing Charges are Excluding GST
7.2.1 (Visual and Workmanship Requirement)	-	300	Testing Charges are Excluding GST
6.1.3.2 (Quick coupled fittings)	-	0	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	0	-
4.1 .3(Workmanship and Appearance)	-	300	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	0	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	375	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

9594 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	Testing charges are Excluding GST In Addition PVC Resin testing charge : 3075
9.5(Tensile Strength IS 12235(Part 13))	-	1100	Testing charges are Excluding GST
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	Testing charges are Excluding GST
9.3(Density IS 12235 (Part 14))	-	500	Testing charges are Excluding GST
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1000	Testing charges are Excluding GST
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1100	Testing charges are Excluding GST
9.1( Visual Appearance)	-	0	-
5(COLOUR)	-	0	-
7.3.2(Rib height)	-	0	-
7.3.1(No.of Ribs)	-	350	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	375	Testing charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

31869.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	6000.00	Raw Material Test Charges: 4525+GST Test Charges are excluding GST
8.8(Tensile Strength for Butt-fusion)	-	1600	Test Charges are excluding GST
8.7(Density)	-	500	Test Charges are excluding GST
8.5 (Oxidation Induction Time)	-	2200	Test Charges are excluding GST
8.2(Longitudinal Reversion Test)	-	900	Test Charges are excluding GST
8.6(Overall migration)	-	2000	Test Charges are excluding GST
8.3(Carbon black)	-	925	Test Charges are excluding GST
5.2(Polyethylene Resin)	-	4525	Test Charges are excluding GST
7.2(Length)	-	0	-
6.2(Colour)	-	0	-
6.1.4(PIPE DESCRIPTION)	-	0	-

Complete

25 Apr, 2022

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6938 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	Testing Charges are Excluding GST
4.6.4(DROP TEST)	-	1100	Testing Charges are Excluding GST
4.6.5(MIGRATION TEST)	-	1700	Testing Charges are Excluding GST
4.6.6(PORTABILITY TEST)	-	2900	Testing Charges are Excluding GST
4.6.5.1 (chem)(Colour migration (Caps))	-	1700	Testing Charges are Excluding GST
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	0	-
4.2(Design, Shape & Dimension )	-	300	Testing Charges are Excluding GST
4.6.2(TRANSPARANCY)	-	700	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 10889 (2004)

High density polyethylene films (First Revision)

7825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.4(Density)	-	500	Testing Charges are Excluding GST Total test charge is for Black film only
6.1.5(Melt Flow Rate)	-	1100	Testing Charges are Excluding GST
6.2.1, Table 1(Nominal Thickness)	-	250	Testing Charges are Excluding GST
6.2.2, Table 2(Nominal Width)	-	250	Testing Charges are Excluding GST
6.4.1(Tensile Strength at Break)	-	1100	Testing Charges are Excluding GST
6.4.1, Table 4(Direction)	-	1100	Testing Charges are Excluding GST Machine Direction Transverse Direction
6.4.3, Table 6(Impact Failure Load)	-	1000	Testing Charges are Excluding GST
6.4.2(Elongation at Break)	-	1100	Testing Charges are Excluding GST
5.2(Black Compound)	-	925	Testing Charges are Excluding GST CBC-925 CBD-700
6.4.3(Impact Resistance (Falling Dart))	-	1000	Testing Charges are Excluding GST
6.1.1(Appearance)	-	300	Testing Charges are Excluding GST
6.1.2(Film Form)	-	0	-
6.1.3(Odour )	-	0	-

Complete

25 Apr, 2022

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material)	-	1050	Testing Charges are Excluding GST
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	200	Testing Charges are Excluding GST
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1700	Testing Charges are Excluding GST
6.1.6(Width)	-	250	Testing Charges are Excluding GST
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	1100	Testing Charges are Excluding GST
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	1100	Testing Charges are Excluding GST
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	1100	Testing Charges are Excluding GST
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	1100	Testing Charges are Excluding GST
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	850	Testing Charges are Excluding GST
7.3 Annex G(Drop test )	-	900	Testing Charges are Excluding GST
7.4 Annex H(Ink adhesion test for printed pouches)	-	500	Testing Charges are Excluding GST
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2900	Testing Charges are Excluding GST
7.5 Annex J(Product resistance test for printed pouches)	-	500	Testing Charges are Excluding GST
6.1.4(Odour)	-	0	-
6.1.2(Film Form)	-	0	-
6.1.3(Winding of the Film )	-	0	-

Complete

25 Apr, 2022

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

17793 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	..
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	Testing Charges are Excluding GST
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	Testing Charges are Excluding GST
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	Testing Charges are Excluding GST
4.2 and Table 1 v(Mass of sack )	-	300	Testing Charges are Excluding GST
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2000	Testing Charges are Excluding GST
4.2 and Table 1 x(Ash content )	-	950	Testing Charges are Excluding GST
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	700	Testing Charges are Excluding GST
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	700	Testing Charges are Excluding GST
5.2 and Table 1 iii(Ends per dm )	-	200	Testing Charges are Excluding GST
5.2 and Table 1 iv(Picks per dm )	-	200	Testing Charges are Excluding GST
4.2 and Table 1 ii(Dimensions )	-	250	Testing Charges are Excluding GST
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	Testing Charges are Excluding GST
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

20040 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width )	-	250	Testing Charges are Excluding GST
3.1(Raw Material)	-	2000	Testing Charges are Excluding GST
3.2(Tapes – Linear Density )	-	500	Testing Charges are Excluding GST
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	Testing Charges are Excluding GST
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	Testing Charges are Excluding GST
4.2 and Table 1 iv(Mass of sack )	-	250	Testing Charges are Excluding GST
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	Testing Charges are Excluding GST
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	Testing Charges are Excluding GST
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	Testing Charges are Excluding GST
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	Testing Charges are Excluding GST
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	Testing Charges are Excluding GST
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10340	Testing Charges are Excluding GST
4.1 and Table 1 ix(Ash content )	-	950	Testing Charges are Excluding GST
3.3(Tying Cord)	-	250	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

20580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	2000	Testing Charges are Excluding GST
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	Testing Charges are Excluding GST
4.2(Tapes – Linear Density )	-	500	Testing Charges are Excluding GST
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	Testing Charges are Excluding GST
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	Testing Charges are Excluding GST
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	Testing Charges are Excluding GST
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	Testing Charges are Excluding GST
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	250	Testing Charges are Excluding GST
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	Testing Charges are Excluding GST
5.2 and Table 1 x(Ash content )	-	950	Testing Charges are Excluding GST
5.2 and Table 1 iii(Ends per dm )	-	250	Testing Charges are Excluding GST
5.2 and Table 1 iv(Picks per dm )	-	250	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

20430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	2000	Testing Charges are Excluding GST
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	Testing Charges are Excluding GST
4.2(Tapes – Linear Density )	-	500	Testing Charges are Excluding GST
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	Testing Charges are Excluding GST
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	Testing Charges are Excluding GST
5.1 and Table 1 v(Mass of sack )	-	250	Testing Charges are Excluding GST
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	Testing Charges are Excluding GST
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	Testing Charges are Excluding GST
5.2 and Table 1 x(Ash content )	-	950	Testing Charges are Excluding GST
4.3.2(Mouth)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	250	Testing Charges are Excluding GST
5.2 and Table 1 iv(Picks per dm )	-	250	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

19456 View breakup
12,700/- (Natural Compound) Type 1; 11,050/- (Natural Compound) Type 2; 8,800/- (Natural Compound) Type 3 & 4; 14,650/- (Black Compound) Type 1; 13,000/- (Black Compound) Type 2; 10,750/- (Black Compound); Type 3 & 4 (Excl. Raw Material Rates)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	Testing Charges are Excluding GST
5.1.6a(Carbon Black Content, Annex-A)	-	925	Testing Charges are Excluding GST
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	Testing Charges are Excluding GST
5.1.6b(Ash Content, Annex-A)	-	950	Testing Charges are Excluding GST
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1100	Testing Charges are Excluding GST
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	Testing Charges are Excluding GST
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	Testing Charges are Excluding GST
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1100	Testing Charges are Excluding GST
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	Testing Charges are Excluding GST
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	Testing Charges are Excluding GST
8.1, Table 3(Tear resistance , Annex B)	-	750	Testing Charges are Excluding GST Specimen charge / Conditioning charge :250
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	Testing Charges are Excluding GST Specimen charge / Conditioning charge :250
9.1, Table 4(Puncture resistance , Annex C)	-	750	Testing Charges are Excluding GST
5.1.1(Appearance)	-	300	Testing Charges are Excluding GST
5.1.2(Film Form)	-	200	Testing Charges are Excluding GST
5.1.3(Odour)	-	200	Testing Charges are Excluding GST
8.1, Table 3(Puncture resistance , Annex C)	-	1100	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

30785 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	250	Testing charges are excluding GST
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	250	Testing charges are excluding GST
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	250	Testing charges are excluding GST
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	250	Testing charges are excluding GST
3.1(MANUFACTURE-Raw Material)	-	1050	Testing charges are excluding GST
4.3(Mass-(Annexure E))	-	500	Testing charges are excluding GST
4.1 , Table 1(REQUIREMENTS)	-	17130	Testing charges are excluding GST
3.3.1(Sacks-Table 1)	-	4900	Testing charges are excluding GST

Complete

25 Apr, 2022

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

30330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	Testing Charges are Excluding GST For Non Stabilized Testing Charge is 13463 Excluding GST
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	12380	Testing Charges are Excluding GST
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	12380	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2200	Testing Charges are Excluding GST
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	Testing Charges are Excluding GST
4.2 (Linear Density, 900 denier)	-	500	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2200	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Testing Charges are Excluding GST PVC Resin Testing Charges: 3075
Cl.4(Minimum Thickness)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	500	Testing Charges are Excluding GST
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	Testing Charges are Excluding GST
Cl. 6.2(Opacity- Appendix B)	-	575	Testing Charges are Excluding GST
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	Testing Charges are Excluding GST
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Testing Charges are Excluding GST PVC Resin Testing Charges are : 3075
table 1 sl.no: 02(20 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 03(25 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 04(32 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 05(40 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 06(50 )	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	Testing Charges are Excluding GST In Addition PVC Resin Testing Charge : 3075
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	Testing Charges are Excluding GST
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC resin Testing Charge : 3075
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC Resin testing Charges : 3075
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(Socket Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC Resin testing Charge : 3075
2.2.2, Table 1(Union Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

25 Apr, 2022

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2(diameter of the socket of cap)	-	500	Testing Charges are Excluding GST In Addition PVC Resin 3075
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

25 Apr, 2022

-
-

IS 12100 (1987)

Specification for high density polyethylene (HDPE) woven sacks for packing flour

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Widthwise)	-	1100	Testing Charges are Excluding GST HDPE Woven sack For Packing Flour ( With Liner) Testing charges are : 9000
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Lengthwise)	-	1100	Testing Charges are Excluding GST
3.1, Table 1(Seam breaking strength, Side team)	-	2200	Testing Charges are Excluding GST
3.1, Table 1(Seam breaking strength, Bottom team)	-	2200	Testing Charges are Excluding GST
3.2(Dimensions)	-	250	Testing Charges are Excluding GST
3.3(Mass)	-	500	Testing Charges are Excluding GST

Complete

25 Apr, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

Central institute of Petrochemicals Engineering & Technology, Raipur

Raipur, Raipur, Chhattisgarh, 493221

7008304951 [email protected]

Scope List