BIS - LIMS (Laboratory Information Management System)

CIPET Chennai

TVK industrial area,Guindy, chennai, Chennai, Tamil Nadu, 600032

9480442963 [email protected]

Scope List

Reset

16 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

upto 355mm diameter

23318.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(PVC Resin)	-	3075	Testing Charges after 25% concession( GST Extra as applicable)
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Testing Charges after 25% concession( GST Extra as applicable)
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Testing Charges after 25% concession( GST Extra as applicable)
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	Testing Charges after 25% concession( GST Extra as applicable)
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	Testing Charges after 25% concession( GST Extra as applicable)
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
9.1(PIPE ENDS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	225	Testing Charges after 25% concession( GST Extra as applicable)
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	431.25	Testing Charges after 25% concession( GST Extra as applicable)
10.3(Effect on Water Test)	-	2250	Testing Charges after 25% concession( GST Extra as applicable)
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	725	Testing Charges after 25% concession( GST Extra as applicable)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	825	Testing Charges after 25% concession( GST Extra as applicable)
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	375	Testing Charges after 25% concession( GST Extra as applicable)
10.7(Sulphated Ash Content)	-	712.50	Testing Charges after 25% concession( GST Extra as applicable)
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	8250	Testing Charges after 25% concession( GST Extra as applicable)
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	637.50	Testing Charges after 25% concession( GST Extra as applicable)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	3750	Testing Charges after 25% concession( GST Extra as applicable)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	637.50	Testing Charges after 25% concession( GST Extra as applicable)
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	637.50	Testing Charges after 25% concession( GST Extra as applicable)
11.2(Resistance to External Blows at 0°C)	-	1050	Testing Charges after 25% concession( GST Extra as applicable)
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.1.4(Length)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)

Complete

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

upto 200mm

11368.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	2250	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.1.2(K-Value as per IS-4669)	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
5(COLOUR)	-	0	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	-
7.3.1(No.of Ribs)	-	0	-
7.3.2(Rib height)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.4(Sealing rings - Hardness)	-	281.75	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
9.1(Visual Appearance)	-	225	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.2(Internal Diameter)	-	262.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.3(Density IS 12235 (Part 14))	-	375	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1125	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.5(Tensile Strength IS 12235(Part 13))	-	1325	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	2250	Testing Charges after 25% concession to BIS ( GST Extra as applicable)

Complete

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Upto 355 mm

37800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
6.2.1(6.1.1 Identification Stripes)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7()	-	225	Testing Charges after 25% concession( GST Extra as applicable)
7.2(Length)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
7.4 table -3 & 4(6.1 Dimensions)	-	375	Testing Charges after 25% concession( GST Extra as applicable)
7.4.1.2(Ovality)	-	187.50	Testing Charges after 25% concession( GST Extra as applicable)
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	16050	Testing Charges after 25% concession( GST Extra as applicable)
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1200	Testing Charges after 25% concession( GST Extra as applicable)
8.2(Longitudinal Reversion Test)	-	725	Testing Charges after 25% concession( GST Extra as applicable)
8.3(Carbon black)	-	1218.75	Testing Charges after 25% concession( GST Extra as applicable)
8.4( Melt Flow Rate)	-	825	Testing Charges after 25% concession( GST Extra as applicable)
8.5 (Oxidation Induction Time)	-	1650	Testing Charges after 25% concession( GST Extra as applicable)
8.6(Overall migration)	-	1575	Testing Charges after 25% concession( GST Extra as applicable)
8.7(Density)	-	375	Testing Charges after 25% concession( GST Extra as applicable)
8.8(Tensile Strength for Butt-fusion)	-	1325	Testing Charges after 25% concession( GST Extra as applicable)
8.9 table-6(Elongation at Break)	-	1325	Testing Charges after 25% concession( GST Extra as applicable)
8.1(Slow Crack Growth Rate)	-	4625	Testing Charges after 25% concession( GST Extra as applicable)
5, 5.1 table-1(MATERIALS)	-	0	-
5.2(Polyethylene Resin)	-	4525	Testing Charges after 25% concession( GST Extra as applicable)
5.3(d)(Carbon Black Master Batch)	-	693.75	Testing Charges after 25% concession( GST Extra as applicable)
5.3(e)(Carbon Black Master Batch)	-	712.5	Testing Charges after 25% concession( GST Extra as applicable)

Complete

-
-

IS 9537 : Part 5 (2000)

Conduits four electrical installations - Part 5 pliable conduits of insulating material

- View breakup
Rs.11350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 01-09-2017.

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

upto 20 Lits

7837.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material )	-	787.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.3(Workmanship, Finish & Appearance)	-	225	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.4 (chem)(Brimful capacity)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.5 (chem)(a) Wall Thickness, mm Top)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.5 (chem)((b) Wall Thickness, mm Middle)	-	0	-
4.5 (chem)((c) Wall Thickness, mm Bottom)	-	0	-
4.6.2(TRANSPARANCY)	-	525	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.6.3(LEAKAGE TEST)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.6.4(DROP TEST)	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.6.5(MIGRATION TEST)	-	1275	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2175	Testing Charges after 25% concession to BIS ( GST Extra as applicable)

Complete

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

All

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material)	-	787.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.2(Film Form)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.4(Odour)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.6(Width)	-	187.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1275	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	0	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	0	-
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	637.5	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 7.1(Vibration Leakage Test)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2175	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2 Annex F(Stack Load test)	-	675	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.3 Annex G(Drop test )	-	825	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4 Annex H(Ink adhesion test for printed pouches)	-	375	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.5 Annex J(Product resistance test for printed pouches)	-	375	Testing Charges after 25% concession to BIS ( GST Extra as applicable)

Complete

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

all

9056.25 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	693.75	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
6.2.2(Fittings)	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
6.3(General)	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.3.1(Wall Thickness ofEmitting Pipe)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.3.2(Inside Diameter ofEmitting Pipe)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.3.3(Flow Paths in Emitting Unit)	-	150	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.3.4(Spacing ofEmitter Units)	-	150	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1200	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.5(Resistance to Tension at Elevated Temperature)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	300	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	900	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1200	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.8(Determination of Emitting Unit Exponent)	-	450	Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

All

23867.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	375	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	637.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1050	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.3.1(Bottom seam (IS 10789))	-	975	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 ii(Dimensions )	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.2 and Table 1 iii(Ends per dm )	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.2 and Table 1 iv(Picks per dm )	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 v(Mass of sack )	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1650	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11830	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2 and Table 1 x(Ash content )	-	712.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 2533 (1978)

Specification for geometry boxes (First Revision)

- View breakup
Rs.14437.50

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 19-09-2017.

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

- View breakup
Rs.11350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f. 01-09-2017.

IS 10146 (1982)

Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water zy

All

2687.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2(Material )	-	787.50		Testing Charges after 25% concession for BIS ( GST Extra as applicable)
3.4(Overall Migration)	-	1900		Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

All

7425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.1.1 Table-2(Length of Socket end)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.1.2(Maximum and minimum outside diameter of conduit)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.2(Minimum inside diameter of conduit)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.3(Length of conduit)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.4(Unifomity of The wall Thickness)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.2(Bending Test At Room Temp )	-	750	v
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
10(Resistance to Heat -Ball presure test)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1125	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1125	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.2(Bending Test At Low Temp (-5 ±2°C))	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 9537 : Part 4 (1983)

Specification for conduits for electrical installations: Part 4 pliable self - Recovering conduits of insulating materials

All

7425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Dimensions, (Minimum outside Diameter), IS 9537-4)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.1(Dimensions (Maximum outside Diameter), IS 9537-4)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.3.3(Uniformity of wall thickness, IS 9537-4)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
8.1(Construction, Cl. 8 of IS 9537-1)	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.3(Mechanical Properties (Compression Test), IS 9537-4)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.4(Mechanical Properties (Impact Test), Cl. 9.4 of IS 9537-1)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
9.5(Mechanical Properties (Collapse Test), IS 9537-4)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
10(Resistance to heat)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
11(Resistance to burning, Cl. 11 of IS 9537-1)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
12(Electrical Strength, Cl. 12.1.1 of IS 9537-1)	-	1125	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
12(Insulation Resistance, Cl. 12.1.2 of IS 9537-1)	-	1125	Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All

4218.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	187.50	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	187.50	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	187.50	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	525	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 6.2(Opacity- Appendix B)	-	431.25	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	2250	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	637.50	-

Complete

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

upto 32mm

7431.25 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	693.75	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	525	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.0 5.1 (Table1) (b)Tolerance on OD)	-	0	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	187.50	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	0	-
6.1(Visual Appearance)	-	225	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	2250	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	750	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.2(Reversion Test)	-	825	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.3(Tensile Test)	-	1075	Testing Charges after 25% concession for BIS ( GST Extra as applicable)
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	900	Testing Charges after 25% concession for BIS ( GST Extra as applicable)

Complete

-
-

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

All

3525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	225	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.2(Flow path in emitters)	-	225	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.3.1(Resistance to Hydrostatic pressure)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	375	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	750	Testing Charges after 25% concession to BIS ( GST Extra as applicable)
8.3(Determination of Emitter Exponent)	-	450	Testing Charges after 25% concession to BIS ( GST Extra as applicable)

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET Chennai

TVK industrial area,Guindy, chennai, Chennai, Tamil Nadu, 600032

9480442963 [email protected]

Scope List

No Record Found

No Record Found

No Record Found